Structural deterioration in the roof in an underground mine can easily cause roof fall, and deterioration is difficult to detect. When drilling holes for roof bolts, there is a relationship between the vibration of th...Structural deterioration in the roof in an underground mine can easily cause roof fall, and deterioration is difficult to detect. When drilling holes for roof bolts, there is a relationship between the vibration of the drill rod and the properties of the rock being drilled. This paper analyzes transverse, longitudinal, and torsional vibrations in the drill rod by using vibration theory. Characteristic indexes for three kinds of vibration are determined. Using the finite element analysis software ABAQUS, a model for drill rod vibration during the drilling of roof bolt holes was established based on the geological and mining conditions in the Guyuan Coal Mine, northern China. Results from the model determined that the transverse and the longitudinal vibration decrease as the rock hardness decreases. In descending order, sandstone,sandy mudstone, mudstone, and weak interbeds cause progressively less vibration when being drilled.The ranking for strata that cause decreasing torsional vibration is slightly different, being, in descending order, mudstone, sandstone, sandy mudstone, and weak interbeds. These results provide a theoretical basis for predicting dangerous roof conditions and the presence of weak interbeds to allow for adjusting bolt support schemes.展开更多
Dust generated from bolt hole drilling in roof bolting operation could have high quartz content. As a dust control measure, vacuum drilling is employed on most of the roof bolters in US underground mines. However, fin...Dust generated from bolt hole drilling in roof bolting operation could have high quartz content. As a dust control measure, vacuum drilling is employed on most of the roof bolters in US underground mines. However, fine rock partic- ulates from drilling could escape from the dust collection system and become airborne under some circumstances causing the roof bolter operators expose to quartz-rich respirable dust. A previous research shows that drilling can be controlled through properly selected penetration and rotational rates to reduce the specific energy of drilling. Less specific energy means less energy is wasted on generating noise, heat and over-breakage of rock. It implies that proper control of drilling has a great potential to generate significantly less fine rock dust during drilling. The drilling experiments have been conducted to study the effect of controlling drilling on reducing respirable dust. The preliminary results show that the size distributions of respirable dust were different when controlling drilling in different bite depths. This paper presents the findings from laboratory experimental studies.展开更多
The drilling operation in the roof bolting process,especially in hard rock,generates excessive respirable coal and quartz dusts,which could expose the roof bolting operator to continued health risks.Previous research ...The drilling operation in the roof bolting process,especially in hard rock,generates excessive respirable coal and quartz dusts,which could expose the roof bolting operator to continued health risks.Previous research has shown that the amount of respirable dust produced is dependent on the main drilling parameters,specifically the drilling rotational and penetration rate.In this paper,a roof bolter drilling control process was proposed to reduce the generation of respirable dust.Based on the analysis of laboratory drilling test results,a rational drilling control process(adjusting rotational and penetration rates)to achieve the optimal drilling parameter for different rock types was proposed.In this process,the ratio between specific energy and rock uniaxial compressive strength was used as the index to determine the optimal operation point.The recommended drilling operation range for the rock type used in the experiment was provided,and the reduction in respirable dust generation was demonstrated.By following this control process,the drilling efficiency can be monitored in real time,so the system can stay in a relatively high-energy efficiency with less respirable dust production from the drilling source.This algorithm is targeted to be incorporated into the current roof bolter drilling control system for drilling automation so that a safe and productive drilling operation can be conducted in a healthy working environment.展开更多
基金the National Natural Science Foundation of China (Nos.51104055,51274087,51604094 and 51674098)
文摘Structural deterioration in the roof in an underground mine can easily cause roof fall, and deterioration is difficult to detect. When drilling holes for roof bolts, there is a relationship between the vibration of the drill rod and the properties of the rock being drilled. This paper analyzes transverse, longitudinal, and torsional vibrations in the drill rod by using vibration theory. Characteristic indexes for three kinds of vibration are determined. Using the finite element analysis software ABAQUS, a model for drill rod vibration during the drilling of roof bolt holes was established based on the geological and mining conditions in the Guyuan Coal Mine, northern China. Results from the model determined that the transverse and the longitudinal vibration decrease as the rock hardness decreases. In descending order, sandstone,sandy mudstone, mudstone, and weak interbeds cause progressively less vibration when being drilled.The ranking for strata that cause decreasing torsional vibration is slightly different, being, in descending order, mudstone, sandstone, sandy mudstone, and weak interbeds. These results provide a theoretical basis for predicting dangerous roof conditions and the presence of weak interbeds to allow for adjusting bolt support schemes.
文摘Dust generated from bolt hole drilling in roof bolting operation could have high quartz content. As a dust control measure, vacuum drilling is employed on most of the roof bolters in US underground mines. However, fine rock partic- ulates from drilling could escape from the dust collection system and become airborne under some circumstances causing the roof bolter operators expose to quartz-rich respirable dust. A previous research shows that drilling can be controlled through properly selected penetration and rotational rates to reduce the specific energy of drilling. Less specific energy means less energy is wasted on generating noise, heat and over-breakage of rock. It implies that proper control of drilling has a great potential to generate significantly less fine rock dust during drilling. The drilling experiments have been conducted to study the effect of controlling drilling on reducing respirable dust. The preliminary results show that the size distributions of respirable dust were different when controlling drilling in different bite depths. This paper presents the findings from laboratory experimental studies.
文摘The drilling operation in the roof bolting process,especially in hard rock,generates excessive respirable coal and quartz dusts,which could expose the roof bolting operator to continued health risks.Previous research has shown that the amount of respirable dust produced is dependent on the main drilling parameters,specifically the drilling rotational and penetration rate.In this paper,a roof bolter drilling control process was proposed to reduce the generation of respirable dust.Based on the analysis of laboratory drilling test results,a rational drilling control process(adjusting rotational and penetration rates)to achieve the optimal drilling parameter for different rock types was proposed.In this process,the ratio between specific energy and rock uniaxial compressive strength was used as the index to determine the optimal operation point.The recommended drilling operation range for the rock type used in the experiment was provided,and the reduction in respirable dust generation was demonstrated.By following this control process,the drilling efficiency can be monitored in real time,so the system can stay in a relatively high-energy efficiency with less respirable dust production from the drilling source.This algorithm is targeted to be incorporated into the current roof bolter drilling control system for drilling automation so that a safe and productive drilling operation can be conducted in a healthy working environment.
