Mg matrix composites with SiC particles ranging from 5vol%-25vol% were prepared using stirring casting method. Die casting, squeezing casting, and extrusion were applied for inhibiting or eliminating the defects such ...Mg matrix composites with SiC particles ranging from 5vol%-25vol% were prepared using stirring casting method. Die casting, squeezing casting, and extrusion were applied for inhibiting or eliminating the defects such as gas porosity and shrinkage void. Through die casting and squeezing casting, most of the defects in Mg matrix composites could be eliminated, but the mechanical properties were improved limitedly. On the other hand, after hot extrusion, not only most of the defects of as-cast composites ingots were eliminated, but also the mechanical properties were improved markedly. With the addition of SiC, the tensile strength, yield strength and elastic modulus of as extrusion SiCp/AZ61 composites increased remarkably, and the elongation decreased obviously.展开更多
In the contemporary electric arc furnace(EAF)steelmaking industry,increasing contents and temperature homogenization via fluid flow stirring is found to be an effective method of improving production quality and smelt...In the contemporary electric arc furnace(EAF)steelmaking industry,increasing contents and temperature homogenization via fluid flow stirring is found to be an effective method of improving production quality and smelting efficiency.It is a trend for different factories with bowl-shaped furnaces to apply the bath fluidity enhancement technology.EAF has plenty of advantages in modern steelmaking industry,and the improvements on the EAF steelmaking process have come up with two major tasks,namely reduction in energy consumption and tap-to-tap time.The latter task requires an essential understanding of every phase in EAF steelmaking process.The flat bath phase with poor bath fluid flow was crucial to the product quality and metallurgical efficiency considering EAF’s bowl-shaped structure.The research of three stirring bath methods,oxygen jets injection,electromagnetic stirring,and bottom blowing,were introduced,and then the detailed parameters of each method with their influences on molten bath fluidity were presented.展开更多
基金Funded by the Program for New Century Excellent Talents in University(NCET-12-1040)the National Natural Science Foundation of China(Nos.50901048 and 51174143)+2 种基金the Key Project of Chinese Ministry of Education(No.2012017)the Program Foundation of Ministry of Education of China(No.20101402110008)Natural Science Foundation of Shanxi(No.2010021022-5)
文摘Mg matrix composites with SiC particles ranging from 5vol%-25vol% were prepared using stirring casting method. Die casting, squeezing casting, and extrusion were applied for inhibiting or eliminating the defects such as gas porosity and shrinkage void. Through die casting and squeezing casting, most of the defects in Mg matrix composites could be eliminated, but the mechanical properties were improved limitedly. On the other hand, after hot extrusion, not only most of the defects of as-cast composites ingots were eliminated, but also the mechanical properties were improved markedly. With the addition of SiC, the tensile strength, yield strength and elastic modulus of as extrusion SiCp/AZ61 composites increased remarkably, and the elongation decreased obviously.
基金the National Natural Science Foundation of China(No.51804345)is gratefully acknowledged.
文摘In the contemporary electric arc furnace(EAF)steelmaking industry,increasing contents and temperature homogenization via fluid flow stirring is found to be an effective method of improving production quality and smelting efficiency.It is a trend for different factories with bowl-shaped furnaces to apply the bath fluidity enhancement technology.EAF has plenty of advantages in modern steelmaking industry,and the improvements on the EAF steelmaking process have come up with two major tasks,namely reduction in energy consumption and tap-to-tap time.The latter task requires an essential understanding of every phase in EAF steelmaking process.The flat bath phase with poor bath fluid flow was crucial to the product quality and metallurgical efficiency considering EAF’s bowl-shaped structure.The research of three stirring bath methods,oxygen jets injection,electromagnetic stirring,and bottom blowing,were introduced,and then the detailed parameters of each method with their influences on molten bath fluidity were presented.
