Linearity of Removal in the Proeess of Optical Element Polishing

In the light of some assumptions that are very close to the practical working conditions,a very complicated polishing process of optical element can be simplified as a linear and shift invariant system that is relatd only to the speed,pres- sure and time of processing.In polishing,the removed material can be represented and entreated by the convolution of the removal function of polishing head and the dwell function.The properties of removal function are presented.The assumptions and methods given by the author have been shown to be correct and applicable by experiments using a ring lap to polish the optical surfac.

Simple and universal method in designs of high-efficiency diffractive optical elements for spectrum separation and beam concentration

Diffractive optical elements（DOEs） with spectrum separation and beam concentration（SSBC） functions have important applications in solar cell systems. With the SSBC DOEs, the sunlight radiation is divided into several wave bands so as to be effectively absorbed by photovoltaic materials with different band gaps. A new method is proposed for designing high-efficiency SSBC DOEs, which is physically simple, numerically fast, and universally applicable. The SSBC DOEs are designed by the new design method, and their performances are analyzed by the Fresnel diffraction integral method.The new design method takes two advantages over the previous design method. Firstly, the optical focusing efficiency is heightened by up to 10%. Secondly, focal positions of all the designed wavelengths can be designated arbitrarily and independently. It is believed that the designed SSBC DOEs should have practical applications to solar cell systems.

The determination of 52 elements in marine geological samples by an inductively coupled plasma optical emission spectrometry and an inductively coupled plasma mass spectrometry with a high-pressure closed digestion method

An improved analytical method to determine the content of 52 major, minor and trace elements in marine geological samples, using a HF-HCl-HNO_3 acid system with a high-pressure closed digestion method（HPCD）, is studied by an inductively coupled plasma optical emission spectrometry（ICP-OES） and an inductively coupled plasma mass spectrometry（ICP-MS）. The operating parameters of the instruments are optimized, and the optimal analytical parameters are determined. The influences of optical spectrum and mass spectrum interferences, digestion methods and acid systems on the analytical results are investigated. The optimal spectral lines and isotopes are chosen, and internal standard element of rhodium is selected to compensate for matrix effects and analytical signals drifting. Compared with the methods of an electric heating plate digestion and a microwave digestion, a high-pressure closed digestion method is optimized with less acid, complete digestion,less damage for digestion process. The marine geological samples are dissolved completely by a HF-HCl-HNO_3 system, the relative error（RE） for the analytical results are all less than 6.0%. The method detection limits are 2–40μg/g by the ICP-OES, and 6–80 ng/g by ICP-MS. The methods are used to determine the marine sediment reference materials（GBW07309, GBW07311, GBW07313）, rock reference materials（GBW07103, GBW07104,GBW07105）, and cobalt-rich crust reference materials（GBW07337, GBW07338, GBW07339）, the obtained analytical results are in agreement with the certified values, and both of the relative standard deviation（RSD） and the relative error（RE） are less than 6.0%. The analytical method meets the requirements for determining 52 elements contents of bulk marine geological samples.

A single diffractive optical element implementing spectrum-splitting and beam-concentration functions simultaneously with high diffraction efficiency

In this paper,a novel method is proposed and employed to design a single diffractive optical element（DOE） for implementing spectrum-splitting and beam-concentration（SSBC） functions simultaneously.We develop an optimization algorithm,through which the SSBC DOE can be optimized within an arbitrary thickness range according to the limitations of modern photolithography technology.Theoretical simulation results reveal that the designed SSBC DOE has a high optical focusing efficiency.It is expected that the designed SSBC DOE should have practical applications in high-efficiency solar cell systems.

Realizing high photovoltaic efficiency with parallel multijunction solar cells based on spectrum-splitting and-concentrating diffractive optical element

Based on the facts that multijunction solar cells can increase the efficiency and concentration can reduce the cost dramatically, a special design of parallel multijunction solar cells was presented. The design employed a diffractive optical element （DOE） to split and concentrate the sunlight. A rainbow region and a zero-order diffraction region were generated on the output plane where solar cells with corresponding band gaps were placed. An analytical expression of the light intensity distribution on the output plane of the special DOE was deduced, and the limiting photovoltaic efficiency of such parallel multijunction solar ceils was obtained based on Shockley-Queisser＇s theory. An efficiency exceeding the Shockley--Queisser limit （33%） can be expected using multijunction solar cells consisting of separately fabricated subcells. The results provide an important alternative approach to realize high photovoltaic efficiency without the need for expensive epitaxial technology widely used in tandem solar cells, thus stimulating the research and application of high efficiency and low cost solar cells.

Simple experimental scheme of teleporting a two-qubit state via linear optical elements

We propose a simple experimental scheme in which an unknown two-qubit state is faithfully and deterministically teleported from Alice to Bob. The scheme is constructed with four photons from parametric down conversion, linear optical elements, and conventional photon detectors, all of which are available in current technology. It is shown that the probability of successful teleportation ideally reaches 100% based on single-photon two-qubit-assisted Bell-state measurement, which can distinguish all four Bell-states simultaneously via conventional photon detectors. By generalizing the scheme, the teleportation of an unknown multi-qubit system can also be realized.

PARAMETRIC STUDY OF TISSUE OPTICAL CLEARING BY LOCALIZED MECHANICAL COMPRESSION USING COMBINED FINITE ELEMENT AND MONTE CARLO SIMULATION

Tissue Optical Clearing Devices(TOCDs)have been shown to increase light transmission through mechanically compressed regions of naturally turbid biological tissues.We hypothesize that zones of high compressive strain induced by TOCD pins produce localized water displacement and reversible changes in tissue optical properties.In this paper,we demonstrate a novel combined mechanical finite element model and optical Monte Carlo model which simulates TOCD pin compression of an ex vivo porcine skin sample and modified spatial photon fluence distributions within the tissue.Results of this simulation qualitatively suggest that light transmission through the skin can be significantly affected by changes in compressed tissue geometry as well as concurrent changes in tissue optical properties.The development of a comprehensive multi-domain model of TOCD application to tissues such as skin could ultimately be used as a framework for optimizing future design of TOCDs.

Scheme for Concentration of Unknown Photonic GHZ Entangled States via Linear Optical Elements

We propose two schemes to concentrate unknown nonmaximally tripartite GHZ entangled states via linear optical elements. The finial maximally entangled states obtained from our schemes are shared by two or three parties. Our schemes only need polarizing beam splitters and single-photon detectors. In addition, the schemes can be demonstrated within current experimental technology.

An accurate and stable method of array element tiling for high-power laser facilities

Due to laser-induced damage, the aperture of optics is one of the main factors limiting the output capability of highpower laser facilities. Because of the general difficulty in achieving large-aperture optics, an alternative solution is to tile some small-aperture ones together. We propose an accurate, stable, and automatic method of array element tiling and verify it on a double-pass 1 × 2 tiled-grating compressor in the XG-III laser facility. The test results show the accuracy and stability of the method. This research provides an efficient way to obtain large-aperture optics for high-power laser facilities.

Design optimization of highly efficient spectrum-splitting and beam-concentrating diffractive optical element for lateral multijunction solar cells

Two improved algorithms are proposed to extend a diffractive optical element （DOE） to work under the broad spec- trum of sunlight. An optimum design has been found for the DOE, with a weighted average optical efficiency of about 6.8% better than that of the previous design. The optimization of designing high optical efficiency DOEs will pave the way for future designs of high-efficiency, low-cost lateral multijunction solar cells based on such a DOE.

Method Investigation for Fabricating Micro-Optical Elements by Use of Half Tone Masks

Several approaches to fabricate micro optical elements by use of half tone masks are studied and compared. It is shown that half tone masks employed in filtering image systems can obtain gray patterns with considerably high precision, but it is hard to operate from the viewpoint of operation. The method using contacting lithography technology or laser ablation can be easily operated with the cost of reducing fabrication precision and the trouble of choosing appropriate materials. For all of these methods, the coding of half tone masks with corrections for the nonlinear characteristics of coding, imaging and photoresist is recommended.

Spectrum-Splitting Diffractive Optical Element of High Concentration Factor and High Optical Efficiency for Three-Junction Photovoltaics

A spectrum-splitting and beam-concentrating （SSBC） diffractive optical element （DOE） for three-junction pho- tovoltaics （PV） system is designed and fabricated by five-circ/e micro-fabrication. The incident solar light is efficiently split into three sub-spectrum ranges and strongly concentrated on the focal plane, which can be di- rectly utilized by suitable spectrum-matching solar cells. The system concentration factor reaches 12x. Moreover, the designed wavelengths （450nm, 550nm and 65Onto） are spatially distributed on the focal plane, in good agree- ment with the theoretical results. The average optical effic/ency of all the cells over the three designed wavelengths is 60.07%. The SSBC DOE with a high concentration factor and a high optical efficiency provides a cost-effective approach to achieve higher PV conversion efficieneies.

Measurement of Rotatory Optics Element in Tensor Dielectric Matrix for Rotatory Optical Fiber

The rotatory optics element in the tensor dielectric coefficient matrix is an important para-(meter) for analyzing and calculating a rotatory optical fiber by electromagnetic theory. But the mea-(surement) of rotatory optics element is difficult for the rotatory optical fiber. A simple principle and method for measuring rotatory optics element are put forward in this paper. Firstly by using electromagnetic theory it was demonstrated that the rotatory optics element has a simple linear relation with the rotatory angle, and then the rotatory optics element has a simple linear relation with the magnetic field strength (or bias current in the helix coil) . Secondly a measurement system for the rotatory optics element in the rotatory optical fiber was designed. Using the measurement system the rotatory element can be obtained by measuring the bias current simply.

Design of Diffractive Optical Elements Used for Beam Shaping in the Fresnel Domain

In the Fresnel transform domain, an effective improvement to the conventional iterative algorithm for designing the diffractive optical elements (DOEs) used for spatial beam shaping has been proposed. The algorithm can successfully achieve to design DOEs for beam shaping. Compared with conventional algorithm, this algorithm can provide faster convergence, more powerful ability to overcome local minimum problem and better shaping quality. By computer simulation, the result has shown that the DOEs designed by this algorithm has snch advantages as high uniformity at the main lobe, low profile error and steep edge.

Subwavelength Diffractive Optical Elements

1 Introduction 1.1 Advantages of DOE 1)High diffraction efficiency; 2)Dispersive; 3)More selectivity of designing parameters; 4)More selectivity of primary materials; 5)Can make components miniature,forming array and integration. 1.2 1.3 megapixel triplet plastic mobile

Independent dual beams generated by array element division in integrated optical phased arrays

Optical phased arrays(OPAs)have broad application prospects due to their advanced capability in beamforming and steering.In this work,we achieve independent dual beams in the far field by dividing the array elements of the OPA,with the maximum scanning range reaching 100°.Based on the working principle of OPAs,theoretical considerations of such multibeam generation are presented.A phase data allocation approach for OPAs in the presence of fabrication-induced random phase variation is developed.Simulations of large ensembles of OPAs with various levels of random residual phase errors have been conducted to help analyze the results.This approach can help OPAs realize multi-beams for light detection and ranging(LiDAR).

A novel method of rapidly modeling optical properties of actual photonic crystal fibres

The flexible structure of photonic crystal fibre not only offers novel optical properties but also brings some difficulties in keeping the fibre structure in the fabrication process which inevitably cause the optical properties of the resulting fibre to deviate from the designed properties. Therefore, a method of evaluating the optical properties of the actual fibre is necessary for the purpose of application. Up to now, the methods employed to measure the properties of the actual photonic crystal fibre often require long fibre samples or complex expensive equipments. To our knowledge, there are few studies of modeling an actual photonic crystal fibre and evaluating its properties rapidly. In this paper, a novel method, based on the combination model of digital image processing and the finite element method, is proposed to rapidly model the optical properties of the actual photonic crystal fibre. Two kinds of photonic crystal fibres made by Crystal Fiber A/S are modeled. It is confirmed from numerical results that the proposed method is simple, rapid and accurate for evaluating the optical properties of the actual photonic crystal fibre without requiring complex equipment.

A multi-photon(7×7)-focus 3D laser printer based on a 3D-printed diffractive optical element and a 3D-printed multi-lens array

One of the challenges in the field of multi-photon 3D laser printing lies in further increasing the print speed in terms of voxels/s.Here,we present a setup based on a 7×7 focus array(rather than 3×3 in our previous work)and using a focus velocity of about 1 m/s(rather than 0.5 m/s in our previous work)at the diffraction limit(40×/NA1.4 microscope objective lens).Combined,this advance leads to a ten times increased print speed of about 108 voxels/s.We demonstrate polymer printing of a chiral metamaterial containing more than 1.7×10^(12) voxels as well as millions of printed microparticles for potential pharmaceutical applications.The critical high-quality micro-optical components of the setup,namely a diffractive optical element generating the 7×7 beamlets and a 7×7 lens array,are manufactured by using a commercial two-photon grayscale 3D laser printer.

Stress and modal birefringence of single-mode specialty optical fibers with three-stress regions

Stress-induced birefringence and modal birefringence of single-mode specialty optical fibers with three stress regions are numerically analyzed by the vector finite element method. Stress distribution and stress-induced birefringence distribution of three kinds of optical fibers with different cross structures are presented and compared, and the influence on the stress- induced birefringence by temperature change are analyzed as well. The results show that the fibers with three-stress regions have a lower linear birefringence, which is very important for the fabrication of the circular polaxization-maintalning fiber with high performance drawn from the same fiber preform by using the spinning method.

Design and Simulation of High-power LED Array Packaging

Thermal management is one of the key technologies for high-power Light emitting diode(LED)entering into the general illuminating field.Successful thermal management depends on optimal packaging structure and selected packaging materials.In this paper,the aluminum is employed as a substrate of LED,3×3 array chips are placed on the substrate,heat dissipation performance is simulated using finite element analysis(FEA)software,analyzed are the influences on the temperature of the chip with different convection coefficient,and optical properties are simulated using optical analysis software.The results show that the packaging structure can not only effectually improve the thermal performance of high-power LED array but also increase the light extraction efficiency.