In order to improve the reliability of the spacecraft micro cold gas propulsion system and realize the precise control of the spacecraft attitude and orbit, a micro-thrust, high-precision cold gas thruster is carried ...In order to improve the reliability of the spacecraft micro cold gas propulsion system and realize the precise control of the spacecraft attitude and orbit, a micro-thrust, high-precision cold gas thruster is carried out, at the same time due to the design requirements of the spacecraft, this micro-thrust should be continuous working more than 60 minutes, the traditional solenoid valve used for the thrusts can’t complete the mission, so a long-life micro latching valve is developed as the control valve for this micro thruster, because the micro latching valve can keep its position when it cuts off the outage. Firstly, the authors introduced the design scheme and idea of the thruster. Secondly, the performance of the latching valve and the flow characteristics of the nozzle were simulated. Finally, from the experimental results and compared with the numerical study, it shows that the long-life micro cold gas thruster developed in this paper meets the mission requirements.展开更多
碎屑流是我国山区最危险的地质灾害之一,山区桥墩常受到碎屑流冲击而开裂、倾斜甚至倒塌,给山区桥梁建设、运营带来严重的安全隐患。采用离散元方法(discrete element method,DEM)和有限元方法(finite element method,FEM)耦合的三维数...碎屑流是我国山区最危险的地质灾害之一,山区桥墩常受到碎屑流冲击而开裂、倾斜甚至倒塌,给山区桥梁建设、运营带来严重的安全隐患。采用离散元方法(discrete element method,DEM)和有限元方法(finite element method,FEM)耦合的三维数值模拟方法模拟了碎屑流对双柱式桥墩的冲击效应,并结合斜槽试验,验证了耦合方法的准确性,进一步分析了碎屑流冲击坡度、距离和体积密度对桥墩冲击力的影响规律。结果表明,最大冲击力与碎屑流冲击坡度、距离和体积密度分别呈幂函数(指数大于1)、幂函数(指数小于1)和线性正相关。冲击坡度、距离和体积密度对最大冲击力的敏感度值分别为3.012、0.202、0.804,在桥梁碎屑流灾害防治时需重视冲击坡度和体积密度的影响。将冲击力的数值模拟值与流体动力学模型预测值对比分析表明,流体动力学模型理论公式能较好地预测桥墩所受的最大冲击力,最大预测误差低于23.6%。相关研究结果可为山区桥梁碎屑流灾害防治与设计提供一定的参考依据。展开更多
The Tibetan Plateau(TP)is the youngest orogenic belt resulting from a continental collision on the Earth.It is a natural laboratory for studying continental dynamics,such as continental convergence,plate subduction,an...The Tibetan Plateau(TP)is the youngest orogenic belt resulting from a continental collision on the Earth.It is a natural laboratory for studying continental dynamics,such as continental convergence,plate subduction,and plateau uplift.Investigating the deep structure of the TP has always been a popular issue in geological research.The Moho is the boundary between the crust and the mantle and therefore plays a crucial role in the Earth’s structure.Parameters such as depth and lateral variation,as well as the fine structure of the crust-mantle interface,reveal the lithospheric dynamics in the TP.Two methods are generally employed to study the Moho surface:seismic detection and gravity inversion.Seismic detection has the characteristic of high precision,but it is limited to a few cross-sectional lines and is quite costly.It is not suitable for and cannot be carried out over a large area of the TP.The Moho depth over a large area can be obtained through gravity inversion,but this method is affected by the nature of gravity data,and the accuracy of the inversion method is lower than that of seismic detection.In this work,a high-precision gravity field model was selected.The Parker-Oldenburg interface inversion method was used,within the constraints of seismic observations,and the Bott iteration method was introduced to enhance the inversion efficiency.The Moho depth in the TP was obtained with high precision,consistent with the seismic detection results.The research results showed that the shape of the Moho in the TP is complex and the variation range is large,reaching 60−80 km.In contrast with the adjacent area,a clear zone of sharp variation appears at the edge of the plateau.In the interior of the TP,the buried depth of the Moho is characterized by two depressions and two uplifts.To the south of the Yarlung Zangbo River,the Moho inclines to the north,and to the north,the Moho depresses downward,which was interpreted as the Indian plate subducting to the north below Tibet.The Moho depression on the north side of the Qiangtang block,reaching 72 km deep,may be a result of the southward subduction of the lithosphere.The Moho uplift of the Qiangtang block has the same strike as the Bangong−Nujiang suture zone,which may indicate that the area is compensated by a low-density and low-velocity mantle.展开更多
A reliable multiphase flow simulator is an important tool to improve wellbore integrity and production decision-making.To develop a multiphase flow model with high adaptability and high accuracy,we first build a multi...A reliable multiphase flow simulator is an important tool to improve wellbore integrity and production decision-making.To develop a multiphase flow model with high adaptability and high accuracy,we first build a multiphase flow database with 3561 groups of data and developed a drift closure relationship with stable continuity and high adaptability.Second,a high-order numerical scheme with strong fault capture ability is constructed by effectively combining MUSCL technology,van Albada slope limiter and AUSMV numerical scheme.Finally,the energy equation is coupled into the AUSMV numerical scheme of the drift flow model in the form of finite difference.A transient non-isothermal wellbore multiphase flow model with wide applicability is formed by integrating the three technologies,and the effects of various factors on the calculation accuracy are studied.The accuracy of the simulator is verified by comparing the measurement results with the blowout experiment of a full-scale experimental well.展开更多
针对鱼类大小分级问题设计了一种自动化高效分级设备,结合鱼的体态形状特征,利用其体厚参数可以较平缓、温和地将鱼进行大小分级,同时增加了倾角调节装置,可根据不同种类的鱼调节设备的结构参数。对设备分级鲫鱼的过程进行了离散元(Disc...针对鱼类大小分级问题设计了一种自动化高效分级设备,结合鱼的体态形状特征,利用其体厚参数可以较平缓、温和地将鱼进行大小分级,同时增加了倾角调节装置,可根据不同种类的鱼调节设备的结构参数。对设备分级鲫鱼的过程进行了离散元(Discrete Element Method,DEM)仿真;设计正交试验,对设备的辊轴转速、倾斜角度以及每秒进鱼量进行了优化,得到设备分级准确率和效率的最优值,为进一步设计优化结构提供参考。展开更多
文摘In order to improve the reliability of the spacecraft micro cold gas propulsion system and realize the precise control of the spacecraft attitude and orbit, a micro-thrust, high-precision cold gas thruster is carried out, at the same time due to the design requirements of the spacecraft, this micro-thrust should be continuous working more than 60 minutes, the traditional solenoid valve used for the thrusts can’t complete the mission, so a long-life micro latching valve is developed as the control valve for this micro thruster, because the micro latching valve can keep its position when it cuts off the outage. Firstly, the authors introduced the design scheme and idea of the thruster. Secondly, the performance of the latching valve and the flow characteristics of the nozzle were simulated. Finally, from the experimental results and compared with the numerical study, it shows that the long-life micro cold gas thruster developed in this paper meets the mission requirements.
文摘碎屑流是我国山区最危险的地质灾害之一,山区桥墩常受到碎屑流冲击而开裂、倾斜甚至倒塌,给山区桥梁建设、运营带来严重的安全隐患。采用离散元方法(discrete element method,DEM)和有限元方法(finite element method,FEM)耦合的三维数值模拟方法模拟了碎屑流对双柱式桥墩的冲击效应,并结合斜槽试验,验证了耦合方法的准确性,进一步分析了碎屑流冲击坡度、距离和体积密度对桥墩冲击力的影响规律。结果表明,最大冲击力与碎屑流冲击坡度、距离和体积密度分别呈幂函数(指数大于1)、幂函数(指数小于1)和线性正相关。冲击坡度、距离和体积密度对最大冲击力的敏感度值分别为3.012、0.202、0.804,在桥梁碎屑流灾害防治时需重视冲击坡度和体积密度的影响。将冲击力的数值模拟值与流体动力学模型预测值对比分析表明,流体动力学模型理论公式能较好地预测桥墩所受的最大冲击力,最大预测误差低于23.6%。相关研究结果可为山区桥梁碎屑流灾害防治与设计提供一定的参考依据。
基金the National Natural Science Foundation of China(Grant No.42192535)the Open Fund of Wuhan,Gravitation and Solid Earth Tides,National Observation and Research Station(No.WHYWZ202204)+1 种基金the Strategic Pioneer Science and Technology Special Project of the Chinese Academy of Sciences(Grant No.XDB18010304)the National Natural Science Foundation of China(Grant No.41874096).
文摘The Tibetan Plateau(TP)is the youngest orogenic belt resulting from a continental collision on the Earth.It is a natural laboratory for studying continental dynamics,such as continental convergence,plate subduction,and plateau uplift.Investigating the deep structure of the TP has always been a popular issue in geological research.The Moho is the boundary between the crust and the mantle and therefore plays a crucial role in the Earth’s structure.Parameters such as depth and lateral variation,as well as the fine structure of the crust-mantle interface,reveal the lithospheric dynamics in the TP.Two methods are generally employed to study the Moho surface:seismic detection and gravity inversion.Seismic detection has the characteristic of high precision,but it is limited to a few cross-sectional lines and is quite costly.It is not suitable for and cannot be carried out over a large area of the TP.The Moho depth over a large area can be obtained through gravity inversion,but this method is affected by the nature of gravity data,and the accuracy of the inversion method is lower than that of seismic detection.In this work,a high-precision gravity field model was selected.The Parker-Oldenburg interface inversion method was used,within the constraints of seismic observations,and the Bott iteration method was introduced to enhance the inversion efficiency.The Moho depth in the TP was obtained with high precision,consistent with the seismic detection results.The research results showed that the shape of the Moho in the TP is complex and the variation range is large,reaching 60−80 km.In contrast with the adjacent area,a clear zone of sharp variation appears at the edge of the plateau.In the interior of the TP,the buried depth of the Moho is characterized by two depressions and two uplifts.To the south of the Yarlung Zangbo River,the Moho inclines to the north,and to the north,the Moho depresses downward,which was interpreted as the Indian plate subducting to the north below Tibet.The Moho depression on the north side of the Qiangtang block,reaching 72 km deep,may be a result of the southward subduction of the lithosphere.The Moho uplift of the Qiangtang block has the same strike as the Bangong−Nujiang suture zone,which may indicate that the area is compensated by a low-density and low-velocity mantle.
基金The work was supported by the National Natural Science Foundation of China(No.51874045)National Natural Science Foundation-Youth Foundation(52104056)+2 种基金Department of Natural Resources of Guangdong Province(GDNRC[2021]56)Postdoctoral innovative talents support program in China(BX2021374)Scientific Research Program of Hubei Provincial Department of Education(T2021004).
文摘A reliable multiphase flow simulator is an important tool to improve wellbore integrity and production decision-making.To develop a multiphase flow model with high adaptability and high accuracy,we first build a multiphase flow database with 3561 groups of data and developed a drift closure relationship with stable continuity and high adaptability.Second,a high-order numerical scheme with strong fault capture ability is constructed by effectively combining MUSCL technology,van Albada slope limiter and AUSMV numerical scheme.Finally,the energy equation is coupled into the AUSMV numerical scheme of the drift flow model in the form of finite difference.A transient non-isothermal wellbore multiphase flow model with wide applicability is formed by integrating the three technologies,and the effects of various factors on the calculation accuracy are studied.The accuracy of the simulator is verified by comparing the measurement results with the blowout experiment of a full-scale experimental well.
文摘针对鱼类大小分级问题设计了一种自动化高效分级设备,结合鱼的体态形状特征,利用其体厚参数可以较平缓、温和地将鱼进行大小分级,同时增加了倾角调节装置,可根据不同种类的鱼调节设备的结构参数。对设备分级鲫鱼的过程进行了离散元(Discrete Element Method,DEM)仿真;设计正交试验,对设备的辊轴转速、倾斜角度以及每秒进鱼量进行了优化,得到设备分级准确率和效率的最优值,为进一步设计优化结构提供参考。
