期刊文献+
共找到224篇文章
< 1 2 12 >
每页显示 20 50 100
Theoretical and Experimental Investigation of Flexural Vibration Transfer Properties of High-Pressure Periodic Pipe 被引量:3
1
作者 魏振东 李宝仁 +1 位作者 杜经民 杨钢 《Chinese Physics Letters》 SCIE CAS CSCD 2016年第4期68-71,共4页
According to the theory of phononic crystals, the hydraulic pipeline is designed to be a periodic structure composed of steel pipes and hoses to suppress the vibration of the hydraulic system with band gaps. We presen... According to the theory of phononic crystals, the hydraulic pipeline is designed to be a periodic structure composed of steel pipes and hoses to suppress the vibration of the hydraulic system with band gaps. We present theoretical and experimental investigations into the flexural vibration transfer properties of a high-pressure periodic pipe with the force on the inner pipe wall by oii pressure taken into consideration. The results show that the vibration attenuation of periodic pipe decreases along with the elevation of working pressure for the hydraulic system, and the band gaps in low frequency ranges move towards high frequency ranges. The periodic pipe has good vibration attenuation performance in the frequency range below 1000 Hz and the vibration of the hydraulic system is effectively suppressed. A11 the results are validated by experiment. The experimental results show a good agreement with the numerical calculations, thus the flexural vibration transfer properties of the high- pressure periodic pipe can be precisely calculated by taking the fluid structure interaction between the pipe and oil into consideration. This study provides an effective way for the vibration control of the hydraulic system. 展开更多
关键词 of on in Theoretical and Experimental Investigation of Flexural Vibration Transfer Properties of high-pressure Periodic pipe IS
下载PDF
HOPF BIFURCATION OF A NONLINEAR RESTRAINED CURVED PIPE CONVEYING FLUID BY DIFFERENTIAL QUADRATURE METHOD 被引量:7
2
作者 Wang Lin Ni Qiao Huang Yuying (Department of Mechanics,Huazhong University of Science and Technology,Wuhan 430074,China) 《Acta Mechanica Solida Sinica》 SCIE EI 2003年第4期345-352,共8页
This paper proposes a new method for investigating the Hopf bifurcation of a curved pipe conveying fluid with nonlinear spring support.The nonlinear equation of motion is derived by forces equilibrium on microelement ... This paper proposes a new method for investigating the Hopf bifurcation of a curved pipe conveying fluid with nonlinear spring support.The nonlinear equation of motion is derived by forces equilibrium on microelement of the system under consideration.The spatial coordinate of the system is discretized by the differential quadrature method and then the dynamic equation is solved by the Newton-Raphson method.The numerical solutions show that the inner fluid velocity of the Hopf bifurcation point of the curved pipe varies with different values of the parameter, nonlinear spring stiffness.Based on this,the cycle and divergent motions are both found to exist at specific fluid flow velocities with a given value of the nonlinear spring stiffness.The results are useful for further study of the nonlinear dynamic mechanism of the curved fluid conveying pipe. 展开更多
关键词 curved fluid conveying pipe Hopf bifurcation nonlinear vibration DQM
下载PDF
Effects of supported angle on stability and dynamical bifurcations of cantilevered pipe conveying fluid 被引量:2
3
作者 Chunbiao GAN Shuai JING +1 位作者 Shixi YANG Hua LEI 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI CSCD 2015年第6期729-746,共18页
The effects of the supported angle on the stability and dynamical bifurcations of an inclined cantilevered pipe conveying fluid are investigated. First, a theoretical model of the pipe is developed through the force b... The effects of the supported angle on the stability and dynamical bifurcations of an inclined cantilevered pipe conveying fluid are investigated. First, a theoretical model of the pipe is developed through the force balance and stress-strain relationship. Second, the response surfaces, stability, and critical lines of the typical hanging system (H-S) and standing system (S-S) are discussed based on the modal analysis. Last, the bifurcation diagrams of the pipe are presented for different supported angles. It is shown that pipes will undergo a series of bifurcation processes and show rich dynamic phenomena such as buckling, Hopf bifurcation, period-doubling bifurcation, chaotic motion, and divergence motion. 展开更多
关键词 cantilevered pipe conveying fluid supported angle modal analysis responsecharacteristics dynamical bifurcation
下载PDF
大型岔管内螺旋流涡带数值分析研究
4
作者 申艳 姜姿云 +3 位作者 杨利 宋蕊香 王薇 郭苗 《水利学报》 EI CSCD 北大核心 2024年第7期827-837,共11页
岔管部件广泛应用于常规水电站、抽水蓄能电站等重要水力发电工程。大型岔管(D主≥6 m)由于岔管外形,肋板结构及内部流态三因素耦合可能导致螺旋流涡带,其对岔管的水力损失具有不可忽略的消极后果。本文基于经典k-ε湍流模型联合考虑实... 岔管部件广泛应用于常规水电站、抽水蓄能电站等重要水力发电工程。大型岔管(D主≥6 m)由于岔管外形,肋板结构及内部流态三因素耦合可能导致螺旋流涡带,其对岔管的水力损失具有不可忽略的消极后果。本文基于经典k-ε湍流模型联合考虑实际岔管材料壁面粗糙率,构建了考虑壁面真实粗糙度的钢岔管内部流态k-ε湍流模型。计算结果与实验数据对比验证了本文构建数值模型的有效性及准确性。随后采用导流叶片策略有效消除了大型岔管内的螺旋流涡带现象。研究结果表明:多导流叶片优化方案可有效减少和消除大型岔管中的螺旋流态,并减少岔管水力损失。具体地,对岔管支管路中不同流量工况,优化后的主管路部分流线分布均匀,最大流速位于岔管支管路弯管(内弯)附近;优化后岔管肋板两端涡旋流态基本消除。对岔管支管流量不均匀工况,支管路内螺旋流涡带流态明显减缓,只存在少量螺旋流态。本文研究结果可对岔管水力优化设计及相近研究领域提供一定参考。 展开更多
关键词 计算流体力学 螺旋流涡带 导流叶片 水力损失 水力优化 数值研究 大型岔管
下载PDF
高压岔管衬砌混凝土施工期温控防裂研究
5
作者 焦石磊 王振红 +3 位作者 汪娟 金鑫鑫 张步 张凯恒 《水力发电》 CAS 2024年第1期33-36,97,共5页
高压岔管承受高压水和高速水流冲刷,为了满足这一结构和工作特点,混凝土常采用泵送混凝土,利用其强度高的优点,但其温升高、弹性模量大,且一般是早强混凝土,容易产生温度裂缝。针对这一问题,以阳江抽水蓄能电站高压岔管为例,结合结构和... 高压岔管承受高压水和高速水流冲刷,为了满足这一结构和工作特点,混凝土常采用泵送混凝土,利用其强度高的优点,但其温升高、弹性模量大,且一般是早强混凝土,容易产生温度裂缝。针对这一问题,以阳江抽水蓄能电站高压岔管为例,结合结构和材料特点,借助三维有限单元法,对高压岔管施工期的温度应力进行研究,筛选温控防裂措施。计算结果表明,高压岔管分缝长度对防裂影响显著,同时降低入仓温度,采用内部通水降温,可起到更好的温控防裂效果。高压岔管混凝土在有通水冷却措施条件下,浇筑温度控制在26℃以内,最小安全系数可达1.50以上,可作为工程现场浇筑施工方案。 展开更多
关键词 高压岔管 衬砌混凝土 施工期 防裂 分缝长度 浇筑温度 仿真计算
下载PDF
1200 m特高水头钢岔管制造创新与质量控制
6
作者 朱树清 胡铠 易克新 《西北水电》 2024年第3期48-53,共6页
为保证1200 m特高水头钢岔管制造质量与工期,长龙山抽水蓄能电站建设者进行了系列创新,并提出了控制措施,通过考察确定钢岔管整体制造、运输至工地的方案,采用控制钢板下料放样、划线、卷制、组拼、焊接等工序来保证钢岔管外形尺寸及内... 为保证1200 m特高水头钢岔管制造质量与工期,长龙山抽水蓄能电站建设者进行了系列创新,并提出了控制措施,通过考察确定钢岔管整体制造、运输至工地的方案,采用控制钢板下料放样、划线、卷制、组拼、焊接等工序来保证钢岔管外形尺寸及内在质量。水压试验表明:在初次水压试验成功基础上提高第二次试验压力值,进一步减小钢岔管成品焊接残余应力,创下国内钢岔管10 MPa水压试验记录。可为类似工程提供参考。 展开更多
关键词 特高水头 钢岔管 制造 创新 质量控制
下载PDF
基于CFD的月牙肋钢岔管单向流固耦合分析
7
作者 代思波 许艇 《水利水电工程设计》 2024年第2期1-5,共5页
压力钢管在众多水利水电工程中被广泛应用。钢岔管作为压力钢管中最为复杂的结构,一直是设计过程中研究的重点。近年来,月牙肋岔管由于结构受力条件好、节省工程量、水力学条件优越等众多优点,在大直径、高水头电站中得到普遍应用。应用... 压力钢管在众多水利水电工程中被广泛应用。钢岔管作为压力钢管中最为复杂的结构,一直是设计过程中研究的重点。近年来,月牙肋岔管由于结构受力条件好、节省工程量、水力学条件优越等众多优点,在大直径、高水头电站中得到普遍应用。应用CFD方法对国外某水电站压力钢岔管进行单向流固耦合分析,首先根据流体计算结果,分析得出岔管内动水压力对岔管及月牙肋产生的荷载作用;进而将其结果作为初始条件对岔管结构进行应力分析;最终得出在运行工况下,仅动水压力对钢岔管产生的荷载为静水压力的1%,应力不超过其允许应力的4%。 展开更多
关键词 压力钢管 月牙肋岔管 单向流固耦合 CFD
下载PDF
抽水蓄能电站岔管年效益损失模型
8
作者 代元 《陕西水利》 2024年第1期1-3,7,共4页
抽水蓄能电站岔管产生的水头损失占比较大,进行岔管体型优化时,如何选择最优体型是一个关键问题。前人通过比较水头损失系数来确定最优体型,然而发电工况与抽水工况水头损失系数最小值对应的体型不一样,无法得到唯一解。为了便于选择岔... 抽水蓄能电站岔管产生的水头损失占比较大,进行岔管体型优化时,如何选择最优体型是一个关键问题。前人通过比较水头损失系数来确定最优体型,然而发电工况与抽水工况水头损失系数最小值对应的体型不一样,无法得到唯一解。为了便于选择岔管的最优体型,通过分析电站经济效益,建立抽水蓄能电站岔管年效益损失模型,并将其应用于岔管导流板体型优化中。结果表明:通过岔管年效益损失模型可得到体型优化的唯一最优解,该模型可行,并且导流板能够减小电站岔管29.75%的年效益损失。年效益损失模型可用于岔管体型优化选型。 展开更多
关键词 抽水蓄能电站 岔管 年效益损失模型 体型优化 导流板
下载PDF
NONLINEAR RESPONSES OF A FLUID-CONVEYING PIPE EMBEDDED IN NONLINEAR ELASTIC FOUNDATIONS 被引量:10
9
作者 Qin Qian Lin Wang Qiao Ni 《Acta Mechanica Solida Sinica》 SCIE EI 2008年第2期170-176,共7页
The nonlinear responses of planar motions of a fluid-conveying pipe embedded in nonlinear elastic foundations are investigated via the differential quadrature method discretization (DQMD) of the governing partial di... The nonlinear responses of planar motions of a fluid-conveying pipe embedded in nonlinear elastic foundations are investigated via the differential quadrature method discretization (DQMD) of the governing partial differential equation. For the analytical model, the effect of the nonlinear elastic foundation is modeled by a nonlinear restraining force. By using an iterative algorithm, a set of ordinary differential dynamical equations derived from the equation of motion of the system are solved numerically and then the bifurcations are analyzed. The numerical results, in which the existence of chaos is demonstrated, are presented in the form of phase portraits of the oscillations. The intermittency transition to chaos has been found to arise. 展开更多
关键词 fiuid-conveying pipe nonlinear elastic foundation chaotic motion bifurcATION differential quadrature method discretization (DQMD)
下载PDF
In-plane dynamics of a fluid-conveying corrugated pipe supported at both ends 被引量:5
10
作者 Yingjie WANG Qichang ZHANG +1 位作者 Wei WANG Tianzhi YANG 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI CSCD 2019年第8期1119-1134,共16页
The dynamics and stability of fluid-conveying corrugated pipes are investigated. The flow velocity is assumed to harmonically vary along the pipe rather than with time. The dimensionless equation is discretized with t... The dynamics and stability of fluid-conveying corrugated pipes are investigated. The flow velocity is assumed to harmonically vary along the pipe rather than with time. The dimensionless equation is discretized with the differential quadrature method (DQM). Subsequently, the effects of the mean flow velocity and two key parameters of the corrugated pipe, i.e., the amplitude of the corrugations and the total number of the corrugations, are studied. The results show that the corrugated pipe will lose stability by flutter even if it has been supported at both ends. When the total number of the corrugations is sufficient, this flutter instability occurs at a micro flow velocity. These phenomena are verified via the Runge-Kutta method. The critical flow velocity of divergence is analyzed in detail. Compared with uniform pipes, the critical velocity will be reduced due to the corrugations, thus accelerating the divergence instability. Specifically, the critical flow velocity decreases if the amplitude of the corrugations increases. However, the critical flow velocity cannot be monotonously reduced with the increase in the total number of the corrugations. An extreme point appears, which can be used to realize the parameter optimization of corrugated pipes in practical applications. 展开更多
关键词 fluid-structure interaction fluid-conveying corrugated pipe differential QUADRATURE method (DQM) bifurcation FLUTTER
下载PDF
FLOW-INDUCED INTERNAL RESONANCES AND MODE EXCHANGE IN HORIZONTAL CANTILEVERED PIPE CONVEYING FLUID (Ⅱ) 被引量:4
11
作者 徐鉴 杨前彪 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2006年第7期935-941,共7页
The Newtonian method is employed to obtain nonlinear mathematical model of motion of a horizontally cantilevered and inflexible pipe conveying fluid. The order magnitudes of relevant physical parameters are analyzed q... The Newtonian method is employed to obtain nonlinear mathematical model of motion of a horizontally cantilevered and inflexible pipe conveying fluid. The order magnitudes of relevant physical parameters are analyzed qualitatively to establish a foundation on the further study of the model. The method of multiple scales is used to obtain eigenfunctions of the linear free-vibration modes of the pipe. The boundary conditions yield the characteristic equations from which eigenvalues can be derived. It is found that flow velocity in the pipe may induced the 3:1, 2:1 and 1:1 internal resonances between the first and second modes such that the mechanism of flow-induced internal resonances in the pipe under consideration is explained theoretically. The 3:1 internal resonance first occurs in the system and is, thus, the most important since it corresponds to the minimum critical velocity. 展开更多
关键词 pipe conveying fluid internal resonance STABILITY bifurcATION
下载PDF
ANALYSIS OF NONLINEAR DYNAMIC STABILITY OF LIQUID-CONVEYING PIPES 被引量:1
12
作者 ZHANG Li-xiang(张立翔) +1 位作者 HUANG Wen-hu(黄文虎) 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2002年第9期1071-1080,共10页
Nonlinearly dynamic stability of flexible liquid-conveying pipe in fluid structure interaction was analyzed by using modal disassembling technique. The effects of Poisson, Junction and Friction couplings in the wave-f... Nonlinearly dynamic stability of flexible liquid-conveying pipe in fluid structure interaction was analyzed by using modal disassembling technique. The effects of Poisson, Junction and Friction couplings in the wave-flowing-vibration system on the pipe dynamic stability were included in the analytical model constituted by four nonlinear differential equations. An analyzing example of cantilevered pipe was done to illustrate the dynamic stability,characteristics on the pipe in the full coupling mechanisms, and the phase curves related to the first four modal motions were drawn. The results show that the dynamic stable characteristics of the pipe are very complicated in the complete coupling mechanisms, and the kinds of the singularity points corresponding to the various modal motions are different. 展开更多
关键词 piping flow fluid structure interaction nonlinear vibration bifurcATION
下载PDF
某水利枢纽工程钢岔管水压试验闷头有限元分析
13
作者 陈刚 《云南水力发电》 2023年第9期161-164,共4页
某水利枢纽工程钢岔管采用“Y”型月牙肋岔管,在水压试验工况下,对岔管、闷头及两者连接的过渡锥管,进行三维有限元分析,选择满足水压试验的较优体型。现场根据有限元计算确定的闷头和过渡锥管体型进行水压试验,经过应力测试,钢岔管管... 某水利枢纽工程钢岔管采用“Y”型月牙肋岔管,在水压试验工况下,对岔管、闷头及两者连接的过渡锥管,进行三维有限元分析,选择满足水压试验的较优体型。现场根据有限元计算确定的闷头和过渡锥管体型进行水压试验,经过应力测试,钢岔管管壁和肋板各部位应力均小于钢材允许应力,满足设计及规程规范要求。 展开更多
关键词 钢岔管 水压试验 闷头 过渡锥管 三维有限元
下载PDF
清原抽水蓄能电站引水钢岔管水压试验研究 被引量:1
14
作者 张一鸣 钱玉英 宋蕊香 《水利水电技术(中英文)》 北大核心 2023年第S02期67-72,共6页
引水钢岔管作为抽水蓄能电站重要的水工建筑物,体型复杂,制作难度大。介绍了清原引水钢岔管打压试验原理、方法及过程,验证了钢岔管体型设计及焊缝接头的可靠性,通过试验前后的无损检测,消除了新钢岔管的部分残余应力。结果证明,引水钢... 引水钢岔管作为抽水蓄能电站重要的水工建筑物,体型复杂,制作难度大。介绍了清原引水钢岔管打压试验原理、方法及过程,验证了钢岔管体型设计及焊缝接头的可靠性,通过试验前后的无损检测,消除了新钢岔管的部分残余应力。结果证明,引水钢岔管质量有保证,能满足运行期各个工况下的安全运行。 展开更多
关键词 钢岔管 水压试验 抽水蓄能电站
下载PDF
2∶1内共振下超临界输流管道的强迫振动
15
作者 王则 耿佳 李满枝 《科学技术与工程》 北大核心 2023年第35期14916-14922,共7页
高流速输流管道广泛应用于航空航天发动机等领域。为了掌握其在超临界流速下的动力学响应特征,基于坐标变换法建立了超临界输流管道的运动方程,并使用Galerkin截断法将运动方程离散为非线性常微分方程。通过增量谐波平衡法求解系统具有2... 高流速输流管道广泛应用于航空航天发动机等领域。为了掌握其在超临界流速下的动力学响应特征,基于坐标变换法建立了超临界输流管道的运动方程,并使用Galerkin截断法将运动方程离散为非线性常微分方程。通过增量谐波平衡法求解系统具有2∶1内共振时的非线性动力学响应,通过Floquet理论研究系统响应的稳定性和分岔行为,并使用数值积分法模拟了系统的拟周期响应。研究结果表明:当系统存在2∶1内共振时,系统响应发生不对称的双跳跃现象;而且2∶1内共振会导致能量在模态间相互转移,导致系统发生鞍结点分岔和Hopf分岔行为,引起系统响应的拟周期行为。分析系统参数对响应的影响表明,增加阻尼和减小激励幅值可以降低系统发生拟周期响应的可能性。可见,2∶1内共振是影响输流管道动力学特征的重要因素,因此设计中应该避免系统存在2∶1内共振,也可通过增加阻尼或减小激励的方式减少系统发生拟周期响应。 展开更多
关键词 超临界输流管道 内共振 增量谐波平衡法 HOPF分岔 拟周期响应
下载PDF
平底钢岔管体型设计与受力特性分析--以西藏德罗水电站为例 被引量:1
16
作者 汪碧飞 熊泽斌 陈锐 《人民长江》 北大核心 2023年第5期169-174,共6页
对称平底钢岔管各管节的管底在同一高程,钢管检修时,水体能自流排放,方便检修,但使用常规的解析方法对平底钢岔管进行体型设计较为困难,出图效率也较低。提出在CATIA中建立对称平底钢岔管的标准模板,以适应不同尺寸钢岔管的三维设计,并... 对称平底钢岔管各管节的管底在同一高程,钢管检修时,水体能自流排放,方便检修,但使用常规的解析方法对平底钢岔管进行体型设计较为困难,出图效率也较低。提出在CATIA中建立对称平底钢岔管的标准模板,以适应不同尺寸钢岔管的三维设计,并以德罗水电站中钢岔管为例,采用ANSYS程序对月牙肋钢岔管、平底月牙肋钢岔管及平底三梁钢岔管的受力特性进行分析。结果表明:3种形式的钢岔管均能满足受力要求,其中月牙肋岔管受力最优,但排水不便;平底钢岔管采用三梁进行加强后,加强梁与岔管管壁应力得到显著改善;平底钢岔管既能方便排水检修,也能满足受力要求,可在工程中推广应用。 展开更多
关键词 平底钢岔管 水电站压力管道 有限元计算 月牙肋 “U”型梁 腰梁
下载PDF
高压压水试验在某抽水蓄能电站工程中的应用
17
作者 韩国强 白云哲 柯雄 《电力勘测设计》 2023年第S02期193-197,共5页
抽水蓄能电站工程地下厂房、岔管等部位具有高水头压力,常规压水试验结果不能反映实际水头压力作用下岩体的渗透特性。为了确定岩体在高压水头作用下渗透特性,在某抽水蓄能电站高压岔管部位进行了高压压水试验,通过研究压力—流量曲线... 抽水蓄能电站工程地下厂房、岔管等部位具有高水头压力,常规压水试验结果不能反映实际水头压力作用下岩体的渗透特性。为了确定岩体在高压水头作用下渗透特性,在某抽水蓄能电站高压岔管部位进行了高压压水试验,通过研究压力—流量曲线、透水率—RQD关系,获得岩体临界压力,为设计在岔管衬砌支护选型提供依据。 展开更多
关键词 高压岔管 高压压水试验 P-Q曲线 临界压力
下载PDF
黄金峡水利枢纽泵站压力钢管研究
18
作者 马晋阳 李舒展 罗畅 《中国水能及电气化》 2023年第3期51-55,59,共6页
泵站压力钢管的扬水支管与主管的设计合理性会直接影响到水利枢纽的安全运行,亚洲最大的黄金峡水利枢纽泵站压力钢管的扬水支管与主管采用斜交布置方案,水头损失小,工作能耗低;扬水支管与主管采用月牙肋岔管的连接方式受力合理;CATIA中... 泵站压力钢管的扬水支管与主管的设计合理性会直接影响到水利枢纽的安全运行,亚洲最大的黄金峡水利枢纽泵站压力钢管的扬水支管与主管采用斜交布置方案,水头损失小,工作能耗低;扬水支管与主管采用月牙肋岔管的连接方式受力合理;CATIA中采用参数化建模提高了设计效率;为了更接近实际的受力状态,文章在对岔管进行相关有限元分析计算时,选用了实体单元对肋板进行模拟,使结果更加精细与合理。文章取得的研究成果对水利枢纽泵站压力钢管的设计与施工提供了一定参考,也可对今后国内外其他类似工程提供技术与经验支撑。 展开更多
关键词 CATIA ANSYS 月牙肋钢岔管 参数化设计 单元类型
下载PDF
廷巴班水电站三梁钢岔管受力特性有限元分析
19
作者 候天兴 《吉林水利》 2023年第12期44-49,共6页
水电站钢岔管是发电机组前用于连接压力钢管主管与支管的重要结构,其受力条件复杂,若设计不合理将极大威胁水电站的运行安全。三梁钢岔管为一分三的复杂岔管结构,受较多的焊缝及管壁转折影响,应力分布更不均匀,设计过程更为复杂。以廷... 水电站钢岔管是发电机组前用于连接压力钢管主管与支管的重要结构,其受力条件复杂,若设计不合理将极大威胁水电站的运行安全。三梁钢岔管为一分三的复杂岔管结构,受较多的焊缝及管壁转折影响,应力分布更不均匀,设计过程更为复杂。以廷巴班水电站为例,采用三维有限元计算方法,对初拟的三梁钢岔管设计体型应力状态进行分析,结合对加强梁应力改善作用和岔管各部位厚度对应力的影响分析,验证了三梁钢岔管设计体型的合理性,研究成果具有一定的工程参考价值。 展开更多
关键词 三梁钢岔管 加强梁 膜应力 局部应力
下载PDF
基于结构优化设计的埋藏式钢岔管结构计算分析
20
作者 李春辉 任哲明 《吉林水利》 2023年第11期12-16,共5页
岔管是抽水蓄能电站地下工程设计的关键部位之一,本文基于结构优化设计理论,采用非线性有限元计算分析方法,考虑围岩和衬砌结构的联合受力特性,分别以衬砌厚度和配筋率为目标函数,分析岔管段围岩及钢筋混凝土衬砌的应力状态和变形形态,... 岔管是抽水蓄能电站地下工程设计的关键部位之一,本文基于结构优化设计理论,采用非线性有限元计算分析方法,考虑围岩和衬砌结构的联合受力特性,分别以衬砌厚度和配筋率为目标函数,分析岔管段围岩及钢筋混凝土衬砌的应力状态和变形形态,为确定岔管段合理的支护参数、衬砌厚度等问题提供理论依据,并提出建议配筋方案。 展开更多
关键词 抽水蓄能电站 岔管 结构优化 有限元计算
下载PDF
上一页 1 2 12 下一页 到第
使用帮助 返回顶部