Application of high-pressure water jet technology and the theory of rock burst control in roadway

This paper puts forward using high-pressure water jet technology to control rock burst in roadway, and analyzes the theory of controlling rock burst in roadway by the weak structure zone model. The weak structure zone is formed by using high-pressure water jet to cut the coal wall in a continuous and rotational way. In order to study the influence law of weak structure zone in surrounding rock, this paper numerically analyzed the influence law of weak structure zone, and the disturbance law of coal wall and floor under dynamic and static combined load. The results show that when the distance between high-pressure water jet drillings is 3 m and the diameter of drilling is 300 mm, continuous stress superposition zone can be formed. The weak structure zone can transfer and reduce the concentrated static load in surrounding rock, and then form distressed zone. The longer the high-pressure water jet drilling is, the larger the distressed zone is. The stress change and displacement change of non-distressed zone in coal wall and floor are significantly greater than that of distressed zone under dynamic and static combined load. And it shows that the distressed zone can effectively control rock burst in roadway under dynamic and static combined load. High-pressure water jet technology was applied in the haulage gate of 250203 working face in Yanbei Coal Mine, and had gained good effect. The study conclusions provide theoretical foundation and a new guidance for controlling rock burst in roadway.

In situ experimental study on TBM excavation with high-pressure water-jet-assisted rock breaking

China’s first high-pressure hydraulically coupled rock-breaking tunnel boring machine(TBM) was designed to overcome the rock breaking problems of TBM in super-hard rock geology, where high-pressure water jet system is configured, including high-flow pump sets, high-pressure rotary joint and high-pressure water jet injection device. In order to investigate the rock breaking performance of high-pressure water-jet-assisted TBM, in situ excavation tests were carried out at the Wan’anxi Water Diversion Project in Longyan, Fujian Province, China, under different water jet pressure and rotational speed. The rock-breaking performance of TBM was analyzed including penetration, cutterhead load, advance rate and field penetration index. The test results show that the adoption of high-pressure water-jet-assisted rock breaking technology can improve the boreability of rock mass, where the TBM penetration increases by 64% under the water jet pressure of 270 MPa. In addition, with the increase of the water jet pressure, the TBM penetration increases and the field penetration index decreases. The auxiliary rock-breaking effect of high-pressure water jet decreases with the increase of cutterhead rotational speed. In the case of the in situ tunneling test parameters of this study, the advance rate is the maximum when the pressure of the high-pressure water jet is 270 MPa and the cutterhead rotational speed is 6 r/min. The technical superiority of high-pressure water-jet-assisted rock breaking technology is highlighted and it provides guidance for the excavation parameter selection of high-pressure hydraulically coupled rock-breaking TBM.

EVOLUTION OF LIQUID WATER CONTENT IN A SEA FOG CONTROLLED BY A HIGH-PRESSURE PATTERN

On March 16–17, 2008, a sea fog occurred in Dianbai in the west of Guangdong Province and was accompanied by a high-pressure synoptic system. Using comprehensive observation datasets, this study analyzes the evolution of liquid water content during this sea fog and investigates the relationships between liquid water content and the average diameters and count densities of fog droplets, air temperature, wind speed and turbulence exchanges. The main results are presented as follows. (1) The sea fog showed a quasi-periodic oscillation characteristic, i.e., it developed, disappeared and then developed again. (2) During the sea fog, the number of fog droplets changed significantly while the changes in average diameter of the fog droplets were relatively small. The development and disappearance of the sea fog correlated significantly with the fog droplet numbers. (3) The air-cooling mechanism played a significant role in sea fog formation and development. However, the influences of this mechanism were not evident during fog persistence. (4) During sea fog formation, weak turbulence exchanges were helpful for fog formation. During sea fog development and persistence, liquid water content increased when turbulence exchanges weakened, and vice versa. The changes in turbulence exchanges were closely related to the quasi-periodic oscillations observed in sea fog presence.

Numerical Simulation Analysis of the Transformer Fire Extinguishing Process with a High-Pressure Water Mist System under Different Conditions

To thoroughly study the extinguishing effect of a high-pressure water mist fire extinguishing system when a transformer fire occurs,a 3D experimental model of a transformer is established in this work by employing Fire Dynamics Simulator(FDS)software.More specifically,by setting different parameters,the process of the highpressure water mist fire extinguishing system with the presence of both diverse ambient temperatures and water mist sprinkler laying conditions is simulated.In addition,the fire extinguishing effect of the employed high-pressure water mist system with the implementation of different strategies is systematically analyzed.The extracted results show that a fire source farther away fromthe centerline leads to a lower local temperature distribution.In addition,as the ambient temperature increases,the temperature above the fire source decreases,while the temperature and the concentrationof theupperflue gas layer bothdecrease.Interestingly,after thehigh-pressurewatermist sprinkler begins to operate,both the temperature distribution above the fire source and the concentration of the flue gas decrease,which indicates that the high-pressure water mist system plays the role of cooling and dust removal.By comparing various sprinkler laying methods,it is found that the lower sprinkler height has a better effect on the temperature above the fire source,the temperature of the upper flue gas layer,and the concentration of the flue gas.Moreover,when the sprinkler is spread over thewhole transformer,the cooling effect on both the temperature above the fire source and the temperature of the upper flue gas layer is good,whereas the change in the concentration of the flue gas above the fire source is not obvious compared to the case where the sprinkler is not fully spread.

Dynamic effects of high-pressure pulsed water jet in low-permeability coal seams

Mine gas extraction in China is difficult due to the characteristics such as micro-porosity,low-permeability and high adsorption of coal seams.The pulsed mechanismof a high-pressure pulsed water jet was studied through theoretical analysis,experimentand field measurement.The results show that high-pressure pulsed water jet has threedynamic properties.What's more,the three dynamic effects can be found in low-permeabilitycoal seams.A new pulsed water jet with 200-1 000 Hz oscillation frequency andpeak pressure 2.5 times than average pressure was introduced.During bubble collapsing,sound vibration and instantaneous high pressures over 100 MPa enhanced the cuttingability of the high-pressure jet.Through high-pressure pulsed water jet drilling and slotting,the exposure area of coal bodies was greatly enlarged and pressure of the coal seamsrapidly decreased.Therefore,the permeability of coal seams was improved and gas absorptionrate also decreased.Application results show that gas adsorption rate decreasedby 30%-40%and the penetrability coefficient increased 100 times.This proves that high-pressurepulsed water is more efficient than other conventional methods.

A Numerical Study on the Extinguishing Performances of High-Pressure Water Mist on Power-Transformer Fires for Different Flow Rates and Particle Velocities

In order to study the extinguishing performance of high-pressure-water-mist-based systems on the fires originating from power transformers the PyroSim software is used.Different particle velocities and flow rates are considered.The evolution laws of temperature around transformer,flue gas concentration and upper layer temperature of flue gas are analyzed under different boundary conditions.It is shown that the higher the particle velocity is,the lower the smoke concentration is,the better the cooling effect on the upper layer temperature of flue gas layer is,the larger the flow rate is and the better the cooling effect is.

Mechanism and control of water seepage of vertical feeding borehole for solid materials in backflling coal mining

To solve the problem of water seepage of vertical feeding borehole for solid materials,we established the fluid-solid coupling dynamic model of groundwater flowing in rock mass adjacent to the vertical feeding borehole.Combining with the engineering geological conditions,we built a numeral model to study the influence rule of the aquifer hydraulic pressure and seepage location of feeding borehole on the amount of seepage with fnite element numerical method.The results show that the nonlinear relationship is presented among the amount of seepage,the seepage location and aquifer hydraulic pressure.The higher the aquifer hydraulic pressure is,the closer the distance between seepage location and aquifer is,and the faster the harmful levels of aquifer will grow.In practice,we calculated the allowable seepage of feeding borehole by the optimum moisture content and natural moisture content of backflling materials,and then determined the protection zone of feeding borehole,so the moisture content of backflling materials can be controlled within the scope of optimum moisture content.

A study of hydrate plug formation in a subsea natural gas pipeline using a novel high-pressure flow loop

The natural gas pipeline from Platform QKI8-1 in the southwest of Bohai Bay to the onshore processing facility is a subsea wet gas pipeline exposed to high pressure and low temperature for a long distance. Blockages in the pipeline occur occasionally. To maintain the natural gas flow in the pipeline, we proposed a method for analyzing blockages and ascribed them to the hydrate formation and agglomeration. A new high-pressure flow loop was developed to investigate hydrate plug formation and hydrate particle size, using a mixture of diesel oil, water, and natural gas as experimental fluids. The influences of pressure and initial flow rate were also studied. Experimental results indicated that when the flow rate was below 850 kg/h, gas hydrates would form and then plug the pipeline, even at a low water content （10%） of a water/oil emulsion. Furthermore, some practical suggestions were made for daily management of the subsea pipeline.

Effect of Feeding on Fresh(wet)Housefly Maggots(Musca domestica)with or without Artificial Diet on Water Quality and Growth Rates of African Catfish(Clarias gariepinus Burchell,1822)Fry under Laboratory Conditions

No or little information on the use fresh(wet)housefly maggots(Musca domestica)in African catfish(Clarias gariepinus)fry feeding.Therefore,this study was conducted to investigate the effect of feeding on fresh(wet)housefly maggots with or without artificial diet on water quality,growth performance,survival percentage and feed utilization of African catfish fry under laboratory conditions.Housefly maggots produced from a mixture of poultry droppings and foods wastes,it was used to replace artificial feed at 0,50 and 100% levels.Catfish were fed artificial diet alone(Feed 1),fresh(wet)housefly maggots alone(Feed 2),and 50% fresh housefly maggots with 50% artificial diet(Feed 3)were prepared and tested on triplicate groups of African catfish fry(initial weight of 0.25±0.02 g)for 60 days.Results showed that final weight(g/fish)was significantly(P≤0.05)higher in fish fed on feed 3(6.03±0.08),followed by fish fed feed 2(4.62±0.27),followed by fish fed feed 1(3.15±0.68).Specific growth rate(%/day)was also significantly higher in fish fed on feed 3(5.31±0.10),followed by fish fed feed 2(4.86±0.03),followed by fish fed feed 1(4.18±0.24).The same trend was observed with total weight gain,percentage weight gain,daily growth rate and relative growth rate.Feed intake and protein intake were significantly(P≤0.05)higher in fish fed on feed 3 and fish fed on feed 2,followed by fish fed feed 1.While,feed conversion ratio(FCR)and protein efficiency ratio were not significantly(P>0.05),but the improvement in FCR recorded in catfish fry fed feed 3 and feed 2 under the experimental conditions.Survival percentage was within the range 55-75%,with insignificant differences(P>0.05)among treatments.The water quality parameters such as temperature,pH,dissolved oxygen,total ammonia,nitrite and nitrate were not significantly(P>0.05)between the treatments and were tolerable for Catfish culture.Accordingly,use of the 50% fresh(wet)housefly maggots with 50% artificial diet in African catfish fry feeding had positive effect on growth performance and reduce of the feed cost.

Feasibility Analysis of Back-Pressure Steam Feeding Water Pump for Direct Air-Cooled Unit

As the performance of an air-cooled condenser is apt to be affected by the fluctuating ambient condition, some difficulties are brought to the use of a steam feeding water pump in an air-cooled unit. This paper introduces a new design of for steam feeding the water pump of an air-cooled unit using the back-pressure steam turbine as the prime motor. Using variable condition analysis on a 600 MW direct air-cooled unit, and with consideration of the effect on the ambient conditions, the feasibility, economy, and adaptability of the design are verified.

On the Thermo Economical Optimization of Feed Water Heaters in Thermal Power Plants

A thermoeconomic optimization analysis is presented yielding simple algebraic formulae for estimating the optimum number of feed water heater and optimal area distribution among the feed water heaters for thermal power plants. The P1-P2 method is used in the present study, together with the thermoeconomic analyses of feed water heaters.

Water Intake and Utilization in Mithun (Bos frontalis):Effect of Environmental Temperature,Rearing System and Concentrate Feed Supplement

Seasonal and sexual variations as well as the effect of dry feed supplement on total drinking water intake and its utilization were observed in mithun （Bosfrontalis） - a semi-wild animal found in North Eastern Hill Region （NEHR） of India. In a completely randomized design, twelve adult mithuns （B. frontalis） as per their sex and body weight were assigned in two different rearing systems （free grazing and free grazing with dry concentrate feed supplementation）, and ten growing male mithuns as per their body weight assigned in two different levels of dry concentrate feed supplementation （1.o kg and 2.0 kg dry concentrate feeds on green forage based diet） and in two different seasons （summer and winter）. It was observed that the environmental temperature had a significant effect on drinking water intake by mithuns. Drinking water consumption （per unit of body weight） was significantly （P 〈 0.05） higher in summer than in winter. Supplementation of concentrate feed on free grazing animals resulted in increase in water consumption. Total water consumption （drinking as well as performed water） was found to be 15.18 litres per 100 kg body weight by growing mithun. Feed dry matter and digestible nutrient intakes by growing mithun were observed to be increased with the increase of supplementation of dry concentrate feed. Roughage to concentrate ratio did not affect the nutrient digestibility. Mithun calves drank an average of 4.30 litres water for each kg of dry matter intake. Metabolic water was significantly （P〈0.01） increased with the increase of supplementation of concentrate feed whereas water turn over, which depends upon the body weight of the animals, did not differ significantly on offering of lower or higher level of dry feed. Faecal water loss of growing mithun was decreased with the increase in intake of concentrate feed and was estimated to be 33 - 46 % of total water intake. Excretion of water through faeces of mithun was about 3.8 % of body weight. It could, therefore, be inferred that water intake by mithun varied with seasons, rearing systems and dry feed consumption. As far as the water nutrition is concerned, it is needed to give an attention while feeding mithun in summer with dry feed supplementation under semi-intensive system of rearing.

Effect of Water Temperature on Feeding Rhythm in Common Carp (Cyprinus carpio haematopterus Temminck et Schlegel)

Feeding rhythm of common carp was investigated from 4℃ to 34℃. The results indicated that there was a diel feeding rhythm for both adult （630-850 g） and youth （61-91 g） at all tested temperatures. There were two main activity peaks at 8：00-11：00 a.m. and 19：00-23：00 p.m., during which feeding quantities were 10.68%-32.53% and 16.25%-33.41% of the daily intake, respectively. When water temperature dropped to below 10℃, the feeding peak concentrated at 8：00-11：00 a.m. and 19：00 p.m. to 4：00 a.m. At 6℃, though both adult and youth would still feed, the feeding quantities were only 0.01% and 0.35% of body mass. Daily feeding rate of adult and youth reached 1.21% and 2.63% at 14℃, respectively. Both adult and youth carps reached the maximum daily feeding rate at 28℃, being 2.84% and 12.06% of body mass, respectively. The daily feeding rate of adult and youth reduced suddenly after at 34℃, and the daily feeding rate was only 0.74% and 9.45% of body mass, respectively. There was significant difference in daily feeding rate at different water temperatures （P〈0.05）.

Development of New Green Feed for Large Water Surface Ecological Fishery

In view of the fact that cages and bait are not allowed in large water surface aquiculture,1-2 kinds of new green feeds"plankton+microecologics"were developed to solve the problems of yield reduction,slow growth and difficulty in fishing of aquatic organisms caused by extensive mode.The new green feed is ecological,environmentally friendly and residue-free,which not only supplements nutrition but also meets the requirements of environmental protection.

Cattle Feed Resource,Water Sources and Housing System in the Central Rift Valley of Oromia Regional State,Ethiopia

The study was conducted in Adami Tulu Jidokombolcha(ATJK),Bora,Dodola,Shala and Negele-Arsi districts with objective to assess main cattle feed resources,water sources and housing systems.A pre-tested,semi-structured questionnaire was used to conduct survey.About 240 respondents were identified using random sampling techniques.Collected data was analyzed by SPSS statistical software(Ver.24).Study result indicates that household in average had three hectares of land and allocated about two hectares of land for crop cultivation.Most respondents reported that cattle herding is not common during dry season while it is common during wet season.Survey result indicate that natural pasture,weed and maize tiller and stored crop residues are main feed resources in wet season while crop after math,crop residue and fodder trees are main resources during dry season.Brackish,local mineral and common salt are mineral sources for cattle in study areas.Lake,river and boreholes are important water sources in dry season where as ponds and rivers are main water sources during wet season for their cattle.The observed cattle watering frequency is mainly once a day.Housing system practiced in the study areas is mainly Kraal.The information generated from this study on land size per household,cattle herding system,feed resources,mineral sources,water sources,water utilization and housing type can be used as a baseline for any livestock development programs in those and similar areas.

High-pressure capacity expansion and water injection mechanism and indicator curve model for fractured-vuggy carbonate reservoirs

Water injection for oil displacement is one of the most effective ways to develop fractured-vuggy carbonate reservoirs.With the increase in the number of rounds of water injection,the development effect gradually fails.The emergence of high-pressure capacity expansion and water injection technology allows increased production from old wells.Although high-pressure capacity expansion and water injection technology has been implemented in practice for nearly 10 years in fractured-vuggy reservoirs,its mechanism remains unclear,and the water injection curve is not apparent.In the past,evaluating its effect could only be done by measuring the injection-production volume.In this study,we analyze the mechanism of high-pressure capacity expansion and water injection.We propose a fluid exchange index for high-pressure capacity expansion and water injection and establish a discrete model suitable for high-pressure capacity expansion and water injection curves in fractured-vuggy reservoirs.We propose the following mechanisms:replenishing energy,increasing energy,replacing energy,and releasing energy.The above mechanisms can be identified by the high-pressure capacity expansion and water injection curve of the well HA6X in the Halahatang Oilfield in the Tarim Basin.By solving the basic model,the relative errors of Reservoirs I and II are found to be 1.9%and 1.5%,respectively,and the application of field examples demonstrates that our proposed high-pressure capacity expansion and water injection indicator curve is reasonable and reliable.This research can provide theoretical support for high-pressure capacity expansion and water injection technology in fracture-vuggy carbonate reservoirs.

高密度流水养鱼(Flowing Water Fish Culture)新技术研究

本文从鱼场选择和建池规格要求、降低饵料系数以及鱼病的防治几方面介绍了高密度流水养鱼新技术。

Assessment of Fish Farming Practices, Operations, Water Resource Management and Profitability in Katsina State, Nigeria

This study assessed the fish production, culture facilities, operations, water resource management and profitability of fish farming in Katsina State, Nigeria, with a view of understanding the status of aquaculture development in Katsina State. Data were collected using structured questionnaire administered to 35 out of the active 42 farms in Katsina State at the period and the data obtained were analyzed using descriptive statistics and linear regression. Among the respondents, 37.1% used concrete tank alone and another 37.2% used concrete tank with other types of culture facilities, 57.1% practised mono-culture techniques and 77.1% used stagnant renewal system as culture system. Management of water quality was done by majority(82.9%) with mere visual evaluation, while 68.6% did not use any forms of water treatment. Most of the farms(80%) depended on imported feed for feeding their fish and gross profits of ■7.29±1.81 and ■157.83±118.08 were obtained on fingerlings and adult fish, respectively. The tested explanatory variables were responsible for 45.4% change in profitability and profitability was found to be dependent on feeding cost(t=–3.38 and p=0.002) and size of fish at harvest(t=2.70 and p=0.011). The research findings established that fish farming in Katsina State was under developed.

Comparing Freshwater Benthic Macroinvertebrate Communities in Forest and Urban Streams of the Coastal Ecological Region of Cameroon

In this study conducted in the coastal zone of Cameroon, biological indices and functional feeding groups of benthic macroinvertebrates were used to assess the health status of two urban streams. For a better diagnosis, two streams located in coastal forest zone were used as a reference. Benthic macroinvertebrates were sampled monthly over a 3-month period (from May to July 2017) in six urban stations and six forest stations. Measurements of the physicochemical variables were done simultaneously. Physicochemical analysis revealed that urban streams are strongly polluted with high content of decaying organic matters, while forest streams are slightly polluted as indicated by the Principal Component Analysis. Concerning benthic macroinvertebrates, urban streams are poorly diversified with the proliferation of taxa tolerant to water pollution and belonging to the functional feeding groups of collectors-gatherers. Inversely, forest streams are more diversified and dominated by sensitive taxa, most belonging to the functional feeding groups of predators and shredders. These marked differences between biological indices and feeding mode of benthic macroinvertebrates in forest and urban rivers confirm the reliability of benthic macroinvertebrates as good indicators of freshwater ecosystem in the coastal zone of Cameroon.

Biological control experiment of excess propagation of Cyclops for drinking water security

Cyclops of zooplankton propagated excessively in eutrophic water body and could not be effectively inactivated by the conventional disinfections process like chlorination due to its stronger resistance to oxidation. In this study, an ecological project was put forward for the excess propagation control of Cyclops by stocking the filter-feeding fishes such as silver carp and bighead carp under the condition of no extraneous nutrient feeding. The results of experiments with different stocking biomass showed that the propagation of Cyclops could be controlled effectively, and the water quality was improved simultaneously by impacting on nutriment level and plankton community structure at proper stocking density of 30 g/m^3 of water. The growth of Cyclops may not be effectually controlled with lower biomass of fish （10 g）, and the natural food chain relation may be destroyed for Cyclops dying out in water while the intense stocking of 120 g per cubic meter of water. In addition, the high predator pressure may accelerate supplemental rate of nutrients from bottom sediments to water body to add the content of total nitrogen and phosphorus in water.