Adakitic Rocks Resulting from Partial Melting of Metabasite at High-Pressure Granulite-Facies Condition during Continental Collision

Objective Previous studies on adakitic rocks with high Sr/Y and La/Yb ratios have established that such rocks may form in a variety of tectonic settings through different petrogenetic processes including： （1） partial melting of subducted young （〈25 Ma）, hot and hydrated oceanic slab; （2） partial melting of thickened lower crust; （3） assimilation and fractional crystallization processes involving basaltic magma; （4） partial melting of delaminated lower crust; and （5） partial melting of hydrous garnet peridotite. The various origins for adakites provide important constraints on crustal growth and evolution throughout the Earth＇s history.

Tectonic Evolution of an Early Precambrian High-Pressure Granulite Belt in the North China Craton

A large-scale high-pressure granulite belt (HPGB), more than 700 km long, is recognized within the metamorphic basement of the North China craton. In the regional tectonic framework, the Hengshan-Chengde HPGB is located in the central collision belt between the western block and eastern block, and represents the deep crustal structural level. The typical high-pressure granulite (HPG) outcrops are distributed in the Hengshan and Chengde areas. HPGs commonly occur as mafic xenoliths within ductile shear zones, and underwent multipile deformations. To the south, the Hengshan-Chengde HPGB is juxtaposed with the Wutai greenstone belt by several strike-slip shear zones. Preliminary isotopic age dating indicates that HPGs from North China were mainly generated at the end of the Neoarchaean, assocaited with tectonic assembly of the western and eastern blocks.

Protolith ages and timing of peak and retrograde metamorphism of the high-pressure granulites in the Shandong Peninsula,eastern North China Craton

High-pressure （HP） granulites widely occur as enclaves within tonalite-trondhjemite- granodiorite （TTG） gneisses of the Early Precambrian metamorphic basement in the Shandong Peninsula, southeast part of the North China Craton （NCC）. Based on cathodoluminescence （CL）, laser Raman spec- troscopy and in-situ U-Pb dating, we characterize the zircons from the HP granulites and group them into three main types： inherited （magmatic） zircon, HP metamorphic zircon and retrograde zircon. The inher- ited zircons with clear or weakly defined magmatic zoning contain inclusions of apatites, and 207pb/206pb ages of 2915--2890 Ma and 2763--2510 Ma, correlating with two magmatic events in the Archaean base- ment. The homogeneous HP metamorphic zircons contain index minerals of high-pressure metamor- phism including garnet, clinopyroxene, plagioclase, quartz, rutile and apatite, and yield 207pb/2066pb ages between 1900 and 1850 Ma, marking the timing of peak HP granulite facies metamorphism. The retrograde zircons contain inclusions of orthopyroxene, plagioclase, quartz, apatite and amphibole, and yield the youngest 207pb/206pb ages of 1840-1820 Ma among the three groups, which we correlate to the medium to low-pressure granulite facies retrograde metamorphism. The data presented in this study suggest subduction of Meso- and Neoarchean magmatic protoliths to lower crust depths where they were subjected to HP granulite facies metamorphism during Palaeoproterozoic （1900-1850 Ma）. Subse- quently, the HP granulites were exhumated to upper crust levels, and were ovel-printed by medium to low-pressure granulite and amphibolite facies retrograde event at ca. 1840--820 Ma.

Zircon U-Pb Dating of Yushugou Terrain of High-Pressure Granulite Facies in Southern Tianshan Mountain and Its Geological Significance

The Yushugou terrain of high\|pressure granulite facies in southern Tianshan Mountain is composed mainly of an ophiolite suite. Most selected zircons are round or elliptical in shape, and some are of tetragonal prism with round edges. The granulometric analyses show that they are well sorted in sedimentation. ZrO\-2/HfO\-2 ratios in zircons range from 45 to 57. These characters, together with the petrologic and geochemical characters of plagioclase\|garnet\|orthopyroxenite bearing zircons, indicate that the protolith of plagioclase\|garnet\|orthopyroxenite may be derived mainly from volcanic base surge sedimentary debris in oceanic islands and from clays formed by seafloor weathering. Zircons are simply of pyroclastic debris. The ophiolite formation age of (440±18) Ma and the first\|stage metamorphic age (amphibolite or granulite facies) of (364±5) Ma were obtained with a method of multiple grains in different groups and a method of concordia plot. These ages provide important information on the temporal and spatial occurrence of southern Paleozoic Tianshan Ocean, the subduction rate of the oceanic crust and the formation mechanism of ophiolite of granulite facies.

High-pressure Granulite-facies Metamorphism and Anatexis in Continental Collision Orogen:Evidence from the Mafic Granulite and Leucosomes in South Altun,Northwestern Qinghai-Tibet Plateau

Deciphering high-pressure granulite-facies metamorphism and anatexis within a collisional orogeny can provide crucial constraints on geodynamic evolution and melt activity during subduction and exhumation.Combining petrographic observations,mineral chemistry,REE in Grt-Cpx thermobarometry,and previous work,at least four stages are suggested for the metamorphic evolution of the mafic granulites in the South Altun,including the protolith stage,the high-pressure granulite-facies stage(909-1037℃ and 17.3-30 kbar),medium-pressure granulite-facies overprint(9.1-11.9 kbar and 753-816℃),and subsequent late amphibolite-greenschist-facies metamorphism.Zircon U-Pb dating shows that the mafic granulites underwent high-pressure granulite-facies metamorphism at 497.2±3.7 Ma,while the leucosome formed at 498.2±2.9 Ma.Thus,the leucosomes from the host mafic granulite may have been formed at the high-pressure granulite-facies metamorphic event.The characteristics of zircon morphology,mineral inclusions,low Th/U values,HREE enrichment,and negative Eu anomalies indicate that these zircons from the leucosome were formed from the metamorphic melts.The characteristics of whole-rock major and trace elements as well as Hf isotopic features of zircons between the leucosomes and the host mafic granulite indicate that the melt may have been generated by the partial melting of the host mafic granulite.

Origin and geological significance of the 1.81 Ga hyalophane-rich pegmatite veins from the high-pressure granulite terrain in the Central Zone of North China Craton

Hyalophane-rich pegmatites are identified from the Manjinggou high-pressure granulite terrain in the Central Zone of North China Craton. Based on field investigation, mineral assemblage and mineral geochemistry, two types of pegmatites can be defined, i.e., hyalophane pegmatite and hyalophane-rich pegmatite. The hyalophane pegmatite is composed of pure hyalophane with 18.7 mol%-19.4 mol% celsian, whereas the hyalophane-rich pegmatite consists of clinopyroxene + titanite + epidote + hyalophane with 11.9 mol%-12.5 mol% celsian. Hyalophane-rich pegmatite has typical magmatic zircons with oscillatory zoning and high Th/U ratios, implying that this type of pegmatite crystallized from special melt similar to magma. SIMS (Cameca 1280) zircon U-Pb dating shows that the crystallization age of the hyalophane-rich pegmatite is 1812±5 Ma, younger than the regional metamorphic age (peak of ca. 1.85 Ga). Zircon δ18O (8.0 ‰-9.3 ‰) and ?Hf (-7.0 to-2.7) values measured by SIMS suggest that the high-pressure granulite terrain was the source of these veins. Therefore, the hyalophane-rich pegmatite veins were likely to be generated by melting of the high-pressure granulite terrain during post collisional uplift. A quick tectonic uplifting process with a velocity of 0.4 to 0.6 mm/a has been estimated for the high-pressure granulite terrane from the Central Zone of North China Craton.

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile industry.Mg can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated die-castings.Herein,the development of non-heat treatment Al alloys is becoming the hot topic.In addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of castings.To achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and Ce.Their influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic simulation.Our results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased porosity.Meanwhile,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical properties.Subsequent introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

Metamorphic characteristics and geotectonic implications of the high-pressure granulites from Namjagbarwa, eastern Tibet

A large area of high-pressure garnet-kyanite granulite is exhumed in the Namjagbarwa area, which provides a window for observing the deep crust rocks and structures of the Tibetan Plateau. Three mineral assemblages can have been distinguished in the garnet-kyanite HP granulites by petrography, i.e. M1. Mus+Bi+P1+Q, M2. Gt+Ky +perphite/antiperphite+Rt+Q, M3. Gt+Sill+Cord+Sp+Ilm ± Opx. Metamorphic conditions of the peak granulite assemblages (M2) formatted by thickening of crusts, with available isotopic ages of 45–69 Ma, are at 1.4—1.8 Gpa and 750—850°. Their retrograde assemblages overprinted by decompressure during the uplift, with available isotopic ages of 18—23 Ma, were formed at 0.60—0.70 Gpa, 621—726°. The thermobarometric evaluation, petrogenetic grid and corresponding isotopic ages indicate a clockwise isothermal decompression metamorphic path. The HP granulite metamorphic history indicates that the collision of the Indian Plate with the Eurasian Plate had begun at 70 Ma, far earlier than the widely accepted 45 Ma.

High-pressure granulite from Western Kunlun,northwestern China:Its metamorphic evolution,zircon SHRIMP U-Pb ages and tectonic implication

High-pressure mafic granulites occurring as lenticular bodies within garnet-amphibolites in Kangxiwar Fault have been first reported in this paper. The P-T conditions of two metamorphic stages were obtained using calibrated geothermal barometers and ThermoCalc Program. The peak metamorphic condition of these high-pressure granulites is about 760–820°C, 1.0–1.2 GPa and the retrograde metamorphic condition is about 620–720°C, 0.7–0.8 GPa. The petrological studies show that they have a near-isobaric cooling P-T path which suggests that the Western Kunlun underwent initial crustal thickening, subsequent exhumation and cooling. The SHRIMP zircon U-Pb dating gives two groups of ages for high-pressure granulites. One is 177±6 Ma which is obtained from the rim of the zircon. We consider this age should be the metamorphic age. And the other is 456±30 Ma which is obtained from the core of the zircon and should be the protolith age. The formation of these high-pressure granulites in western Kunlun is closely correlated with the evolution of the Paleo-Tethys and has important implications for the research on Tethys and Paleo-Asian tectonic zone.

Sm-Nd age dating of high-pressure granulites and amphi-bolite from Sanggan area,North China craton

The high pressure (HP) metamorphic age has been dated to HP rocks from the Sanggan area, North China craton. We have got garnet+whole rock isochron ages of (1 842±38) Ma for HP granulite, and (1 856± 26) Ma for HP amphibolite. The Sm-Nd whole rock isochron of HP granulites give out an age of (1870±150) Ma with Nd depleted mantle model age of (2402-2 482) Ma. Considering the Nd isotope homogenization during the peak metamorphism of the HP granulite, Sm-Nd closure temperature and the retention of Nd isotopic memory in garnets partially broken down during decompression, all these isochron ages are thought to be HP metamorphic age. Furthermore, we proposed that the HP metamorphism took place at the end of Paleoproterozoic during the large-scale collision and assembly of the North China craton.

Geochronological Study of Caledonian Granulite and High-Pressure Gneiss in the Dabie Mountains

: Using the single—zircon evaporation technique and U—Pb method, the authors have conducted an isotope geochonological study of the Huilanshan granulite and Shima garnet-bearing plagioclase gneiss (“country rocks” of the Shima eclogite) in the Dabie Mountains. The study shows that these rocks have peak metamorphic ages of 443–455 Ma, which are essentially consistent with that of the Caledonian high—ultrahigh pressure eclogites. This indicates the existence of the Caledonian collisional orogeny in the Dabie Mountains.

Metamorphism and zircon U-Pb dating of high-pressure pelitic granulites from glacial moraines in the Grove Mountains, East Antarctica

The Grove Mountains are an inland continuation of the Prydz Belt in East Antarctica. Detailed metamorphic petrological and zircon U-Pb geochronological studies are performed on the high-pressure （HP） pelitic granulites from glacial moraines in the Grove Mountains. The metamorphic peak mineral assemblage of the HP pelitic granulites is characterized by garnet ＋ kyanite ＋ K-feldspar ＋ biotite ＋ plagioclase ＋ quartz, and the subsequent medium-pressure （MP） granulite facies retrogression is characterized by sillimanite replacing kyanite, the formation of the biolite ＋ sillimanite symplectite in the matrix. These mineral assemblages and their P-T estimates based on the P-T pseudosection constructed in MnNCKFMASHT system define a clockwise P-T path involving metamorphic peak of 11.6–13.6 kbar at 817–834°C followed by a near-isothermal decompression of 6.7–7.5 kbar at 806–828°C, comparable with those of associated HP mafic granulites from glacial moraines in the Grove Mountains. Zircon U-Pb dating, coupled with available metamorphic age data obtained for HP mafic granulites, reveals HP metamorphism occurred at 540–545 Ma. Combining the previous research results, the HP pelitic granulites and contemporary HP mafic granulites were widely distributed in glacial moraines from the Grove Mountains, suggesting at least part of the Grove Subglacial Highlands underwent Pan-Afrian HP granulite facies metamorphism, which provides new evidence for a collisional tectonic setting of the Pan-Afrian Prydz Belt.

Zircon U-Pb SHRIMP ages of high-pressure granulite in Yushugou ophiolitic terrane in southern Tianshan and their tectonic implications

Zircons from two high-pressure granulite samples from the Yushugou ophiolitic terrane, southern Tianshan have been investigated by cathodoluminescence, LAICPMS and ion microprobe (SHRIMP) for their internal textures, trace elemental compositions and in situ dating. Theweighted mean ages of these two samples are 392±7 and 390±11 Ma, respectively, representing the granulite-facies metamorphic age of the ophiolitic terrane, and indicating that the southern Tianshan ocean initiated its northward subduction since the early Devonian.

Eclogite-High-Pressure Granulite Belt in Northern Edge of the Archean North China Craton

The discovery of retrograded eclogites and high pressure basic granulites in the joining region of Hebei Shanxi Inner Mongolia (HSIM) abandon the old thoughts that Archean granulites in the North China craton are of middle or low pressure facies and promote the reconsideration of Early Precambrian cratonization tectonic process, and reveal the geological fact that the scale, rigid behavior and geological structure of Archean cratonic blocks have strong similarities to the present fundamental plate tectonics, which suggest new tectonic mechanism to understand the early continental evolution of the North China craton. (1) The retrograded eclogites and high pressure granulites constitute a ENE NE striking structure rock zone termed as the Sanggan structural belt. (2) The retrograded eclogites are closely associated with high pressure granulites. We can call this belt a transitional eclogite granulite facies metamorphic belt. Petrographically three metamorphic stages, at least, in the retrograded eclogite can be distinguished. ① The main mineral assemblage is composed of garnet+clinopyroxene+quartz+rutile. The mineral inclusions in garnet are fine grained quartz, rutile and small inclusions of fine grained second stage mineral aggregate. This aggregate consists of hypersthene+albite, and has the typical texture of small hypersthene core surrounded by albite micro grained grains. ② The second mineral assemblage is represented by corona of garnet and symplectite of clinopyroxene. The corona of garnet is composed of hypersthene+plagioclase+clinopyroxene+a minor amount of quartz and magnetite. The symplectite of clinopyroxene is composed of hypersthene + albite+clinopyroxene. The secondary mineral assemblage along boundaries between quartz and garnet (or clinopyroxene) is fine grained aggregate of hypersthene and clinopyroxene. ③ The third retrograded metamorphic minerals are mainly amphiboles replacing pyroxenes and plagioclases replacing garnets. The estimated metamorphic temperature and pressure of symplectitic minerals are 850-900 ℃ and 1.1-1.2 GPa, and those of the third stage are 600-700 ℃ and 0.6-0.7 GPa. They indicate a decompressional pTt path. (3) Geochemically, the compositions of the retrograded eclogites and high pressure basic granulites are the same as those of tholeiite and olivine tholeiite, which are Fe rich and show the differentiation tendency of tholeiitic cumulate rocks. Connecting with isotopic data, we can prove that the original rocks of retrograded eclogites and high pressure basic granulites were formed by partial melting of depleted mantle ( ε (Nd) =1.2-3.6) in the age of about 2 650-2 510 Ma. It might be formed in the lowermost crust by underplating and underwent high pressure metamorphism afterwards.

The Metamorphism of High-Pressure Basic Granulite in Laixi District, East Shandong, China

A high pressure basic granulite ultramafics belt is found in the late Archaean gneisses of Laixi Laiyang Qixia district, east Shandong. This belt has previously been considered as another eclogite belt in Sulu ultra high pressure(UHP) terrain. The typical high P granulite is characterized by mineral assemblages of three generations formed in different metamorphic episode respectively. The mineral assemblage of first episode is Grt(core)+Cpx+Pl, that of the second episode is Grt(rim)+Cpx+Opx+Pl+Amp+Q+Mt and that of the third episode is Cpx+Pl+Amp+Q+Mt. In first assemblage, the garnet porphyroblast is rich in grossular and pyrope component, and the coexisting Cpx is Al rich. Using mineral thermobarometer and Berman’s (1991) TWQ program, the P T conditions of three episodes are established, i.e. T=840℃～860℃, P>1.4GPa for first episode; T=720℃～780℃,P=0.8～1.2GPa for second episode and T=600℃～800℃,P=0.5～0.7GPa for the third episode.Considering the reaction texture, mineral Chemistry and PT estmations, a clockwise PTt path can be constructed, which shows post peak isothermal decompression at first and followed by a process of pressure and temperature decreasing. The mineral wholerock Sm Nd isochron age of the granulite is 1752Ma, which indicates its last thermal event during early middle Proterozoic stage. Therefore, it is concluded that the high pressure granulite and ultramafics of this belt represents the lower continental curst of the North China Craton during early Precambrian without any relationship to tectonic process of the Sulu UHP terrain.

Polymetamorphism of the ultrahigh-temperature granulites in the Rauer Group,East Antarctica:new evidence from zircon SHRIMP U-Pb ages

The Rauer Group is located on the eastern margin of the early Paleozoic Prydz Belt in East Antarctica,and the typical ultrahigh-temperature(UHT,>900℃)granulites outcrop on Mather Peninsula.However,the timing of UHT metamorphism and P–T path of the UHT granulites have long been debated,which is critical to understanding the tectonic nature and evolution history of the Prydz Belt.Thus,both a sapphirine-bearing UHT metapelitic granulite and a garnet-bearing UHT mafic granulite are selected for zircon SHRIMP U-Pb age dating.The results show that metamorphic zircon mantles yield weighted mean^(206)Pb/^(238)U ages of 918±29 Ma and 901±29 Ma for the metapelitic and mafic granulites,respectively,while zircon rims and newly grown zircons yield weighted mean^(206)Pb/^(238)U ages of 523±9 Ma and 532±11 Ma,respectively.These new zircon age data suggest that the UHT granulites may have experienced polymetamorphism,in which pre-peak prograde stage occurred in the early Neoproterozoic Grenvillian orogenesis(1000–900 Ma),whereas the UHT metamorphism occurred in the late Neoproterozoic to early Paleozoic Pan-African orogenesis(580–460 Ma).This implies that P–T path of the UHT granulites should consist of two separate high-grade metamorphic events including the Grenvillian and Pan-African events,which are supposed to be related to assembly of Rodinia and Gondwana supercontinents respectively,and hence the overprinting UHT metamorphic event may actually reflect an important intracontinental reworking.

Nano-scale Reinforcements and Properties of Al-Si-Cu Alloy Processed by High-Pressure Torsion

To improve the comprehensive mechanical properties of Al-Si-Cu alloy,it was treated by a high-pressure torsion process,and the effect of the deformation degree on the microstructure and properties of the Al-Si-Cu alloy was studied.The results show that the reinforcements(β-Si andθ-CuAl_(2)phases)of the Al-Si-Cu alloy are dispersed in theα-Al matrix phase with finer phase size after the treatment.The processed samples exhibit grain sizes in the submicron or even nanometer range,which effectively improves the mechanical properties of the material.The hardness and strength of the deformed alloy are both significantly raised to 268 HV and 390.04 MPa by 10 turns HPT process,and the fracture morphology shows that the material gradually transits from brittle to plastic before and after deformation.The elements interdiffusion at the interface between the phases has also been effectively enhanced.In addition,it is found that the severe plastic deformation at room temperature induces a ternary eutectic reaction,resulting in the formation of ternary Al+Si+CuAl_(2)eutectic.

Experimental and Finite Element Analysis of Corroded High-Pressure Pipeline Repaired by Laminated Composite

Repairs of corroded high-pressure pipelines are essential for fluids transportation under high pressure.One of the methods used in their repairs is the use of layered composites.The composite used must have the necessary strength.Therefore,the experiments and analytical solutions presented in this paper are performed according to the relevant standards and codes,including ASME PCC-2,ASME B31.8S,ASME B31.4,ISO 24817 and ASME B31.G.In addition,the experimental tests are replicated numerically using the finite element method.Setting the strain gauges at different distances from the defect location,can reduce the nonlinear effects,deformation,and fluctuations due to the high pressure.The direct relationship between the depth of an axial defect and the stress concentration is observed at the inner side edges of the defect.Composite reparation reduces the non-linearities related to the sharp variation of the geometry and a more reliable numerical simulation could be performed.

CO_(2)high-pressure miscible flooding and storage technology and its application in Shengli Oilfield,China

There are various issues for CO_(2)flooding and storage in Shengli Oilfield,which are characterized by low light hydrocarbon content of oil and high miscible pressure,strong reservoir heterogeneity and low sweep efficiency,gas channeling and difficult whole-process control.Through laboratory experiments,technical research and field practice,the theory and technology of CO_(2)high pressure miscible flooding and storage are established.By increasing the formation pressure to 1.2 times the minimum miscible pressure,the miscibility of the medium-heavy components can be improved,the production percentage of oil in small pores can be increased,the displacing front developed evenly,and the swept volume expanded.Rapid high-pressure miscibility is realized through advanced pressure flooding and energy replenishment,and technologies of cascade water-alternating-gas(WAG),injection and production coupling and multistage chemical plugging are used for dynamic control of flow resistance,so as to obtain the optimum of oil recovery and CO_(2)storage factor.The research results have been applied to the Gao89-Fan142 in carbon capture,utilization and storage(CCUS)demonstration site,where the daily oil production of the block has increased from 254.6 t to 358.2 t,and the recovery degree is expected to increase by 11.6 percentage points in 15 years,providing theoretical and technical support for the large-scale development of CCUS.

Recognition of Ophiolite Belt and Granulite in Northern Area of Mian－Lue， Southern Qinling， China and Their Implication

A ophiolite belt associated with the tectonic melange is recoghzed in northern area of Mian-Lue, southern Qinling. The ophiolite is considered to originate in a island arc. The occurrence of the ophiolite indicates that a paleo-ocean or finite oceanic basin existed POSt-Prot6rozoic in southern Qiuling, implying the difference of the continental basement of Southern Qinling from the Yangtze craton. The ophiolitc and themelange may mark the paleo-suture zoic between the two plates. The basic granulite is found in eastern area (Anzishan) of the ophiolite belt. The p-T path for metamorphism of the granulite demonstrates a process of continental collision.