Usually the water head of the pumped storage hydro-plant is high, generally up to 400-500 m, therefore the rock mass under the high-pressure bifurcation pipe have to bear as high as millions Pascal water pressure, in ...Usually the water head of the pumped storage hydro-plant is high, generally up to 400-500 m, therefore the rock mass under the high-pressure bifurcation pipe have to bear as high as millions Pascal water pressure, in according with the requirements of high water head pumped storage hydro-plant should be 1.2 times of the water head special high-pressure packer permeability test compared with normal to test the permeability of rock and rock cleavage pressure value. The test results on the choice of design options often play a decisive role. Based on the engineering practice, the authors studied the drillhole high-pressure packer permeability test in the pumped storage hydro-plant's underground powerhouse, by the analysis of test results, this article offers a demonstration of the deformation of rock fracture witch under building in the condition of high-pressure water head, it provides a more detailed engineering geological background.展开更多
Injection recovery is an important measure for increasing the oil recovery rate of an oil field. One way is that centrifugal pumps or plunger pumps are used in an injection station to responsible for injection over a ...Injection recovery is an important measure for increasing the oil recovery rate of an oil field. One way is that centrifugal pumps or plunger pumps are used in an injection station to responsible for injection over a large area under the same pressure. This method is ineffective for low-permeability layers. For the oilfields in dispersed distribution in the marginal areas of Daqing, the low water-absorbing section needs an injection with a high delivery pressure and a low discharge capacity; another way is to install the submersible electric pump upside down, but because the submersible electric pump and the motor are underground, it is difficult for installation and maintenance. Introduced in this paper is the development and application of a surface high-pressure injection device with a submersible electric pump. Bysuccessful resolving some problems, such as the axial force of the submersible electric pump, sealing, level regulation of the pump, coaxiality and vibration, the device has the good points of running smoothly, moving easily, installation and maintains quickly and long period of running. This device can effectively solve the injection of the low water-absorbing section and of oilfields in dispersed locations. The recovery rate of oilfields is also enhanced.展开更多
Mud pumping in subgrade beds under ballastless tracks will deteriorate the dynamic performance of infrastructure under railway lines,reduce the smoothness of the railway lines,and seriously affect the comfort and safe...Mud pumping in subgrade beds under ballastless tracks will deteriorate the dynamic performance of infrastructure under railway lines,reduce the smoothness of the railway lines,and seriously affect the comfort and safety of the trains.Due to their good mechanical properties,twocomponent polyurethane materials can be used for grouting to treat the fouling problems caused by ballastless track mud pumping.To develop a polyurethane formula suitable for the treatment of ballastless track mud pumping,we first performed indoor experiments to investigate the mechanical properties and gelation time of polyurethane elastomers synthesized with different raw material composition ratios,to determine an optimal composition ratio of the raw materials.Then,we conducted a dynamic field test to verify the remediation effect of the polyurethane material fabricated according to the design ratio.The results showed that polyurethane grouting material with the selected design ratios improved the contact characteristics between the surface layer of the subgrade bed and the base plate in the area,coordinating the dynamic response between the track structure and the subgrade bed.Thus,the obtained polyurethane grouting material could be used to renovate mud pumping areas of ballastless tracks with a good treatment effect.展开更多
Mud pumping induced by moving train loads on rainwater-intruded roadbed causes intensive track vibrations and threatens safety of high-speed trains.In this paper,a vehicle–track–subgrade finite element model was est...Mud pumping induced by moving train loads on rainwater-intruded roadbed causes intensive track vibrations and threatens safety of high-speed trains.In this paper,a vehicle–track–subgrade finite element model was established to analyze the dynamic responses of a ballastless track,and results showed that the concrete base and roadbed were detached because of the whipping effect arising from the rainwater intrusion channel.An in-situ soil core test showed that the intruded rainwater accumulated in roadbed to form standing water and saturated the roadbed.The flapping action of the concrete base caused by the whipping effect led to mud formation mixed with fine particles and rainwater,which migrated upward under the pore-water pressure(PWP)gradient.Mud pumping resulted from continuous particle migration in the saturated roadbed under moving train loads:under normal roadbed condition,coarse and fine particles were uniformly distributed in the roadbed;in early period of mud pumping,fine particles migrated downward to bottom of the roadbed because of the rainwater infiltration flow;in middle stage of mud pumping,fine particles migrated upward and gathered at the roadbed surface under PWP gradient;in later period of mud pumping,fine particles were entrained and removed with the dissipation of excess PWP.Moreover,a full-scale physical model was established to reproduce mud pumping,and polyurethane injection remediation against mud pumping was validated on this physical model.The remediation method was applied to an in-situ mud pumping.The deviation of the vertical track profile reduced remarkably and remained at a low level within half a year,showing a good long-term service performance of the polyurethane remediated roadbed.展开更多
The ceramic coating technology of microarc oxidation (MAO) was utilized to modify surface properties of the movable endplate of a high pressure gear pump used in water-hydraulic system, which is made of aluminium allo...The ceramic coating technology of microarc oxidation (MAO) was utilized to modify surface properties of the movable endplate of a high pressure gear pump used in water-hydraulic system, which is made of aluminium alloy. A coMPact ceramic layer of more than 130 μm was developed on the movable endplate with the hardness up to HV1000 by means of microarc oxidation. A trial of tests conducted in a water power transmission system show that the maximum outlet pressure of the gear pump with the movable endplate treated by microarc oxidation, can reach 16 MPa. It is pointed out that the ceramic coating developed by microarc oxidation technology on the surface of aluminium alloy, is economical and feasible.展开更多
文摘Usually the water head of the pumped storage hydro-plant is high, generally up to 400-500 m, therefore the rock mass under the high-pressure bifurcation pipe have to bear as high as millions Pascal water pressure, in according with the requirements of high water head pumped storage hydro-plant should be 1.2 times of the water head special high-pressure packer permeability test compared with normal to test the permeability of rock and rock cleavage pressure value. The test results on the choice of design options often play a decisive role. Based on the engineering practice, the authors studied the drillhole high-pressure packer permeability test in the pumped storage hydro-plant's underground powerhouse, by the analysis of test results, this article offers a demonstration of the deformation of rock fracture witch under building in the condition of high-pressure water head, it provides a more detailed engineering geological background.
文摘Injection recovery is an important measure for increasing the oil recovery rate of an oil field. One way is that centrifugal pumps or plunger pumps are used in an injection station to responsible for injection over a large area under the same pressure. This method is ineffective for low-permeability layers. For the oilfields in dispersed distribution in the marginal areas of Daqing, the low water-absorbing section needs an injection with a high delivery pressure and a low discharge capacity; another way is to install the submersible electric pump upside down, but because the submersible electric pump and the motor are underground, it is difficult for installation and maintenance. Introduced in this paper is the development and application of a surface high-pressure injection device with a submersible electric pump. Bysuccessful resolving some problems, such as the axial force of the submersible electric pump, sealing, level regulation of the pump, coaxiality and vibration, the device has the good points of running smoothly, moving easily, installation and maintains quickly and long period of running. This device can effectively solve the injection of the low water-absorbing section and of oilfields in dispersed locations. The recovery rate of oilfields is also enhanced.
基金The authors gratefully acknowledge the financial support for this research by the National Natural Science Foundation of China(Grant Nos.51978588 and 52078434)。
文摘Mud pumping in subgrade beds under ballastless tracks will deteriorate the dynamic performance of infrastructure under railway lines,reduce the smoothness of the railway lines,and seriously affect the comfort and safety of the trains.Due to their good mechanical properties,twocomponent polyurethane materials can be used for grouting to treat the fouling problems caused by ballastless track mud pumping.To develop a polyurethane formula suitable for the treatment of ballastless track mud pumping,we first performed indoor experiments to investigate the mechanical properties and gelation time of polyurethane elastomers synthesized with different raw material composition ratios,to determine an optimal composition ratio of the raw materials.Then,we conducted a dynamic field test to verify the remediation effect of the polyurethane material fabricated according to the design ratio.The results showed that polyurethane grouting material with the selected design ratios improved the contact characteristics between the surface layer of the subgrade bed and the base plate in the area,coordinating the dynamic response between the track structure and the subgrade bed.Thus,the obtained polyurethane grouting material could be used to renovate mud pumping areas of ballastless tracks with a good treatment effect.
基金This article was supported by the National Natural Science Foundation of China(No.52125803,No.51988101,and No.52008369)the National Key Research and Development Program(No.2018YFE0207100).
文摘Mud pumping induced by moving train loads on rainwater-intruded roadbed causes intensive track vibrations and threatens safety of high-speed trains.In this paper,a vehicle–track–subgrade finite element model was established to analyze the dynamic responses of a ballastless track,and results showed that the concrete base and roadbed were detached because of the whipping effect arising from the rainwater intrusion channel.An in-situ soil core test showed that the intruded rainwater accumulated in roadbed to form standing water and saturated the roadbed.The flapping action of the concrete base caused by the whipping effect led to mud formation mixed with fine particles and rainwater,which migrated upward under the pore-water pressure(PWP)gradient.Mud pumping resulted from continuous particle migration in the saturated roadbed under moving train loads:under normal roadbed condition,coarse and fine particles were uniformly distributed in the roadbed;in early period of mud pumping,fine particles migrated downward to bottom of the roadbed because of the rainwater infiltration flow;in middle stage of mud pumping,fine particles migrated upward and gathered at the roadbed surface under PWP gradient;in later period of mud pumping,fine particles were entrained and removed with the dissipation of excess PWP.Moreover,a full-scale physical model was established to reproduce mud pumping,and polyurethane injection remediation against mud pumping was validated on this physical model.The remediation method was applied to an in-situ mud pumping.The deviation of the vertical track profile reduced remarkably and remained at a low level within half a year,showing a good long-term service performance of the polyurethane remediated roadbed.
基金Sponsored by the National Natural Science Foundation of China(Grant No.60772077)
文摘The ceramic coating technology of microarc oxidation (MAO) was utilized to modify surface properties of the movable endplate of a high pressure gear pump used in water-hydraulic system, which is made of aluminium alloy. A coMPact ceramic layer of more than 130 μm was developed on the movable endplate with the hardness up to HV1000 by means of microarc oxidation. A trial of tests conducted in a water power transmission system show that the maximum outlet pressure of the gear pump with the movable endplate treated by microarc oxidation, can reach 16 MPa. It is pointed out that the ceramic coating developed by microarc oxidation technology on the surface of aluminium alloy, is economical and feasible.
