The textures induced by deformation processes of different crafts in air-condition used aluminium 1050H19 foils were measured by using X-ray goniometer. Combining with TEM analysis, effect of texture on deep-drawing p...The textures induced by deformation processes of different crafts in air-condition used aluminium 1050H19 foils were measured by using X-ray goniometer. Combining with TEM analysis, effect of texture on deep-drawing property was discussed. It is show that deformation textures in the specimens, on which four types of rolling-crafts are carried out respectively, are all typical Cu components, and recrystallized R-, Cube-texture don’t exist. Cu-texture is still the predominant component with different orientation density according to different rolling-craft. To specimens which are prone to cracking, their orientation densities of Cu-textures are higher, their textures are stronger and they contain P- and Goss-texture, which are harder to be deformed. The analyses indicat that with the decrease in the rate of reduction/rolling-time and the execution of intermediate holding, textures that are harder to be deformed are eliminated and orientation density of Cu-texture is weakened. Thus, deep-drawing property of aluminium foils is improved.展开更多
Such characteristics of aluminium strip and foil as soft and thin gauge make tension control one of the key techniques for automation gauge control(AGC). To avoid the disadvantage of traditional mathematical control m...Such characteristics of aluminium strip and foil as soft and thin gauge make tension control one of the key techniques for automation gauge control(AGC). To avoid the disadvantage of traditional mathematical control method which is unfitful for nonlinear hysteresis, the technique for tension AGC fuzzy control was developed and thickness deviation more than 3% of product thickness was achieved consequently in 1 350 mm cold rolling mill of aluminium strip and foil. Additionally, because the gauge of aluminium strip and foil is thin, stage-cooling roll method becomes a key technique for profile control. So stage-cooling roll intelligent control method is developed and pre-coated aluminum foil with good profile less than 10 I (the relative differences in elongation of 0.01%) is produced using the profile control system in 1 400 mm cold rolling mill of aluminium strip and foil.展开更多
Based on the principle of BP neural networks, the rolling force model is established after thoroughly analyzing and reprocessing the data of 1 350 mm aluminium foil mill. It states that the difference between the outp...Based on the principle of BP neural networks, the rolling force model is established after thoroughly analyzing and reprocessing the data of 1 350 mm aluminium foil mill. It states that the difference between the output of artificial neural networks rolling force model and the real value is in the order of 3 percent. The model reflects the real feature of process.展开更多
基金supported by Abroad Stwdent Returming Foundation of Heilongjiang(Project LC01C09)supported by Tackle Key Problems of Harbin(Project 0111211108).
文摘The textures induced by deformation processes of different crafts in air-condition used aluminium 1050H19 foils were measured by using X-ray goniometer. Combining with TEM analysis, effect of texture on deep-drawing property was discussed. It is show that deformation textures in the specimens, on which four types of rolling-crafts are carried out respectively, are all typical Cu components, and recrystallized R-, Cube-texture don’t exist. Cu-texture is still the predominant component with different orientation density according to different rolling-craft. To specimens which are prone to cracking, their orientation densities of Cu-textures are higher, their textures are stronger and they contain P- and Goss-texture, which are harder to be deformed. The analyses indicat that with the decrease in the rate of reduction/rolling-time and the execution of intermediate holding, textures that are harder to be deformed are eliminated and orientation density of Cu-texture is weakened. Thus, deep-drawing property of aluminium foils is improved.
文摘Such characteristics of aluminium strip and foil as soft and thin gauge make tension control one of the key techniques for automation gauge control(AGC). To avoid the disadvantage of traditional mathematical control method which is unfitful for nonlinear hysteresis, the technique for tension AGC fuzzy control was developed and thickness deviation more than 3% of product thickness was achieved consequently in 1 350 mm cold rolling mill of aluminium strip and foil. Additionally, because the gauge of aluminium strip and foil is thin, stage-cooling roll method becomes a key technique for profile control. So stage-cooling roll intelligent control method is developed and pre-coated aluminum foil with good profile less than 10 I (the relative differences in elongation of 0.01%) is produced using the profile control system in 1 400 mm cold rolling mill of aluminium strip and foil.
文摘Based on the principle of BP neural networks, the rolling force model is established after thoroughly analyzing and reprocessing the data of 1 350 mm aluminium foil mill. It states that the difference between the output of artificial neural networks rolling force model and the real value is in the order of 3 percent. The model reflects the real feature of process.
