Boric Acid-Assisted Pyrolysis for High-Loading Single-Atom Catalysts to Boost Oxygen Reduction Reaction in Zn-Air Batteries

The emerging of single-atom catalysts(SACs)offers a great opportunity for the development of advanced energy storage and conversion devices due to their excellent activity and durability,but the actual mass production of high-loading SACs is still challenging.Herein,a facile and green boron acid(H_(3)BO_(3))-assisted pyrolysis strategy is put forward to synthesize SACs by only using chitosan,cobalt salt and H_(3)BO_(3)as precursor,and the effect of H_(3)BO_(3)is deeply investigated.The results show that molten boron oxide derived from H_(3)BO_(3)as ideal high-temperature carbonization media and blocking media play important role in the synthesis process.As a result,the acquired Co/N/B tri-doped porous carbon framework(Co-N-B-C)not only presents hierarchical porous structure,large specific surface area and abundant carbon edges but also possesses high-loading single Co atom(4.2 wt.%),thus giving rise to outstanding oxygen catalytic performance.When employed as a catalyst for air cathode in Zn-air batteries,the resultant Co-N-B-C catalyst shows remarkable power density and long-term stability.Clearly,our work gains deep insight into the role of H_(3)BO_(3)and provides a new avenue to synthesis of high-performance SACs.

Biobased Furfurylated Poplar Wood for Flame-Retardant Modification with Boric Acid and Ammonium Dihydrogen Phosphate

Furfurylated wood exhibits excellent dimensional stability and corrosion resistance,making it a promising material for constructing buildings,but it is highly flammable.Herein,flame-retardant furfurylated poplar wood was produced via a two-step process utilizing boric acid(BA)and ammonium dihydrogen phosphate(ADP)as flame-retardant components,and biomass-derived furfuryl alcohol(FA)as a modifier.The acidity of BA and ADP allowed them to catalyze the polymerization of FA,which formed a cross-linked network that immobilized BA and ADP inside the wood.The addition of BA/ADP substantially delayed the time to ignition from 10 to 385 s and reduced the total heat release and total smoke release by 58.75%and 77.31%,respectively.Analysis of the pyrolysis process showed that the decomposition products of BA and ADP protected the underlying furfurylated wood and diluted combustible gases.This method significantly improved the fire retardancy and smokeless properties of furfurylated wood,providing promising prospects for its application as an engineering material.

Effects of boric acid on microstructure and corrosion resistance of boric/sulfuric acid anodic film on 7050 aluminum alloy

The microstructure and corrosion resistance of different boric/sulfuric acid anodic（BSAA） films on 7050 aluminum alloy were studied by atomic force microscopy（AFM）,electrochemical impedance spectroscopy（EIS） and scanning Kelvin probe（SKP）.The results show that boric acid does not change the structure of barrier layer of anodic film,but will significantly affect the structure of porous layer,consequently affect the corrosion resistance of anodic film.As the content of boric acid in electrolyte increases from 0 to 8 g/L,the resistance of porous layer（Rp） of BSAA film increases,the capacitance of porous layer（CPEp） decreases,the surface potential moves positively,the pore size lessens,and the corrosion resistance improves.However,the Rp,CPEp and surface potential will change towards opposite direction when the content of boric acid is over 8 g/L.

Synthesis of Enriched 10B Boric Acid of Nuclear Grade

An economic and effective method of preparing enriched 10B boric acid was established by chemical reactionof enriched 10BF3 and CaCO3. A process of boron trifluoride reacting with water was investigated under certainconditions. Calcium carbonate was selected to counteract hydrofluoric acid followed on. Some key operation factorswere investigated, such as temperature, reaction time and the ratio of CaCO3 to 10BF3. The results showed that the yieldof enriched 10B boric acid could reach 97. 2% and the purity was up to 94. 1% under the following conditions： the temperaturewas 50-60,℃, the reaction time was 28 h and the ratio of CaCO3 to 10BF3 was 4. In addition, after recrystallizationand titration analysis, the purity of the product could reach over 99. 2% from 94.1%.

Effect of Boric Acid on Properties of Calcined Flint Clay-bauxite Castables

In order to prolong the working time of calcined flint clay-bauxite castables during construction at high temperature,boric acid was added into the castables. The effect of boric acid on working time and curing cold crushing strength of the castables at 25 ℃ and 35 ℃ were investigated. After 24 h curing in mould and another 24 h curing at 110 ℃ after demoulding,the specimens were heat treated at 1 000 ℃,1 300 ℃,and 1 500 ℃ for 3 h,respectively. The permanent linear change,bulk density,modulus of rupture,and cold crushing strength were determined. The result shows that there is no need to add boric acid when calcined flint clay-bauxite castables works at 25 ℃; when calcined flint clay-bauxite castables works at 35 ℃,boric acid can increase the working time of the castables,but decrease the curing cold crushing strength a little. Adding boric acid into calcined flint clay-bauxite castables doesn＇t worsen performance of the castables.

Preparation of boric acid from low-grade ascharite and recovery of magnesium sulfate

Boric acid and kieserite were prepared from low-grade ascharite by sulfuric acid method.This method results in the recovery of 71.06%and 45.03%for boric acid and kieserite,respectively.Meanwhile,the boric acid was precipitated from the filtrate at low temperature and the solution was recycled without discharging waste liquid in the whole process.The influence of amount of sulfuric acid,mass fraction of sulfuric acid,reaction temperature and reaction time on the leaching rate of boric acid were studied. The results show that the leaching rate of boric acid reaches 93.80%under the following conditions:the amount of sulfuric acid is 85%of theoretical dosage;the mass fraction of sulfuric acid is 25%;reaction temperature is 95℃;and the reaction time is 100 min. Meanwhile,the effects of mass fraction of magnesium sulfate,crystallization temperature and crystallization time on the crystallization of kieserite were investigated and the optimal crystallization conditions are obtained:the mass fraction of magnesium sulfate is 28%;the crystallization temperature is 180℃and the crystallization time is 4h.

An efficient synthesis of 1,5-benzodiazepine derivatives catalyzed by boric acid

1,5-Benzodiazepine derivatives have been synthesized by the condensation of o-phenylenediamines and ketones in the presence of boric acid as catalyst under mild conditions. This method is simple, environmentally benign and high yielding. ？2009 Chun Wang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Kinetics of Forward Extraction of Boric Acid from Salt Lake Brine by2-Ethyl-1,3-hexanediol in Toluene Using Single Drop Technique

The kinetics of forward extraction of boric acid from salt lake brine by 2-ethyl-1,3-hexanediol in toluene was investigated using the single drop technique. The factors affecting the extraction rate include interfacial area between aqueous phase and organic phase, initial concentration of boric acid in aqueous phase, initial concentration of 2-ethyl-1,3-hexanediol in organic phase, and extraction temperature. The experimental results show that the extraction rate increases with the increase of the initial concentration of boric acid and2-ethyl-1,3-hexanediol, interfacial area of two phases, and temperature. With the temperature-dependence study, it is showed that the extraction is a diffusion-controlled process. The kinetic equation is presented for pH 1.0 in the aqueous phase and temperature of 318 K.

EFFECT OF BORIC ACID ON THE EXTRACTION OF BASTNASITE LEACHING LIQUOR BY CYANEX 923

The effect of boric acid on the extraction of bastnasite leaching liquor by Cyanex 923 was studied. Boric acid wasn’t extracted alone by Cyanex 923 and didn’t influence the cerium(IV) extraction. But it can enhance the extraction of hydrofluoric acid evidently and came into organic phase in form of (HF)(H3BO3).(Cyanex 923).

Influence of Boric Acid and Sucrose on the Germination and Growth of Areca Pollen

This study investigates the effect of boric acid and sucrose on the germination and growth of Areca catechu L (areca palm). Using areca pollen from Hainan, China, this study determines the influence of culture media with different concentrations of boric acid and sucrose on the germination and growth of areca pollen. Results show that the germination and growth of the pollen tube growth are highest under a boric acid concentration of 0.4 g/L to 0.6 g/L. The germination rate of areca pollen is highest in solid medium with a sucrose concentration of 40 g/L. The optimum culture medium for developing areca pollen comprises 5 g/L agar, 0.4 g/L to 0.6 g/L boric acid, 40 g/L sucrose, and water. Furthermore, areca pollen grows most rapidly approximately 1.5 h after in vitro cultivation at normal temperature, and growth stabilizes at approximately 3 h. The principle that governs the development of areca pollen is also discussed.

Preparation and Characterization of High Purity Enriched 10B Boric Acid via Anti-Solvent Recrystallization

Self-made enriched IUB boric acid as raw material was purified by recrystallization. The effects of final crystallization temperature, crystallization time, stirring speed, crystallization frequency and other factors on the purity were investigated. The appropriate operating condition was that the final crystallization temperature and time were 5 ℃ and 10 h respectively under a low-speed stirring for crystallizing twice, which would make the purity and yield of boric acid reach 99.94% and 95.36%, respectively. Taking this as foundation, recrystallization process was optimized with acetone as anti-solvent, whose amount was the most important index. The boric acid solution was added into acetone and recrystallized under the same condition, and the purity and yield of boric acid would reach 99.98% and 99.61%, respectively. The product detected by XRD was confirmed as boric acid crystal. Main ion concentration in the product was detected by ICP, which basically met the national standard of high purity. Crystal morphology of boric acid was observed by SEM.

Efficient one-pot synthesis of 14-substituted-14H-dibenzo[a,j]xanthenes using boric acid under solvent-free conditions

Boric acid efficiently catalysed the one-pot reaction of alkyl or aryl aldehydes with 2-naphthol to afford the corresponding 14- alkyl-or aryl-14H-dibenzo[a,j]xanthenes in good yields under solvent-free conditions.

Boric acid reduces axonal and myelin damage in experimental sciatic nerve injury

The aim of this study was to investigate the effects of boric acid in experimental acute sciatic nerve injury. Twenty-eight adult male rats were randomly divided into four equal groups （n = 7）： control （C）, boric acid （BA）, sciatic nerve injury （I） , and sciatic nerve injury ＋ boric acid treatment （BAI）. Sciatic nerve injury was generated using a Yasargil aneurysm clip in the groups I and BAI. Boric acid was given four times at 100 mg/kg to rats in the groups BA and BAI after injury （by gavage at 0, 24, 48 and 72 hours） but no injury was made in the group BA. In vivo electrophysiological tests were performed at the end of the day 4 and sciatic nerve tissue samples were taken for histopathological examination. The amplitude of compound action potential, the nerve conduction velocity and the number of axons were significantly lower and the myelin structure was found to be broken in group I compared with those in groups C and BA. However, the amplitude of the compound action potential, the nerve conduction velocity and the number of axons were significantly greater in group BAI than in group I. Moreover, myelin injury was significantly milder and the intensity of nuclear factor kappa B immunostaining was significantly weaker in group BAI than in group I. The results of this study show that administration of boric acid at 100 mg/kg after sciatic nerve injury in rats markedly reduces myelin and axonal injury and improves the electrophysiological function of injured sciatic nerve possibly through alleviating oxidative stress reactions.

Boric acid as an efficient catalyst for the synthesis of 1,1-diacetate under solvent-free condition

Boric acid （BO3H3） is an inexpensive, efficient and mild catalyst for the synthesis of 1,1-diacetate （acylal） from the various aromatic and heteroaryl aldehydes with acetic anhydride at room temperature under solvent-free condition. The present method does not involve any hazardous organic solvents or catalysts. This method gives notable advantages such as excellent chemoselectivity, mild reaction condition, short reaction times and excellent yield.

Determination of Iron in Layered Crystal Sodium Disilicate and Sodium Silicate by Flame Atomic Absorption Spectrometry with Boric Acid as a Matrix Modifier

The effects of matrix silicate and experimental conditions on the determination of iron in flame atomic absorption spectrometry （FAAS） were investigated. It was found that boric acid as a matrix modifier obviously eliminated silicate interference. Under the optimum operating conditions, the determination results of iron in layered crystal sodium disilicate and sodium silicate samples by FAAS were satisfactory. The linear range of calibration curve is 0-10.5 μg.mL^-1, the relative standard deviation of method is 1.2%-2.2%, the recovery of added iron is 96.0%- 101%, the sensitivity is 0.19 μg.mL^-l and the detection limit is 77 ng.mL^-1. The effect of the determination of iron of the standard curve method, standard addition calibration and colorimetry method was the same, but the first has the merits of rapid sample preparation, reduced contamination risks and fast analysis.

On the Role of Boric Acid in the Copper-Tin Alloy Bath

The role of boric acid in the copper tin alloy bath has been investigated by means of the cathodic polarization curves,cyclic voltammograms,rate of alloy electrodeposition and morphological analysis of deposits.The results indicate that the presence of boric acid in weak acidic solution for electrodeposition of Cu Sn alloy raises the overvoltage of hydrogen discharge and lowers the overvoltage of Cu,Sn and Cu Sn alloy deposition on the Pt,and accelerates the rate of depostion.Boric acid was adsorbed on the surface of cathode and inhibited reduction of hydrogen,then the adsorbed boric acid promoted electrodeposition of metals as a catalyzator.However,as the concentration of boric acid is more than 0.50 mol/L,the above effect was weakened due to the complexation reaction between the excessive boric acid and metallic ions.

Preparation of anodic films on 2024 aluminum alloy in boric acid-containing mixed electrolyte

The anodizing oxidation process on 2024 aluminum alloy was researched in the mixed electrolyte with the composition of 30 g/L boric acid, 2 g/L sulfosalicylic acid and 8 g/L phosphate. The results reveal that the pre-treatment and the composition of the mixed electrolyte have influence on the properties of the films and the anodizing oxidation process. Under the condition of controlled potential, the anodizing oxidation current—time response curve displays "saddle" shape. First, the current density reaches a peak value of 8-20 A/dm2 and then decreases rapidly, finally maintains at 1-2 A/dm2. The film prepared in the mixed electrolyte is of porous-type with 20 nm in pore size and 500 μm-2 in porosity. Compared with the conventional anodic film obtained in sulfuric acid, the pore wall of the porous layer prepared in this work is not continuous, which seems to be deposited by small spherical grains. This porous structure of the anodic film may result from the characteristics of the mixed electrolyte and the special anodizing oxidation process. The surface analysis displays that the anodic film is amorphous and composed of O, Al, C, P, S, Si and no copper element is detected.

Study of Cross-Linking between Boric Acid and Different Types of Polyvinyl Alcohol Adhesive

Polyvinyl alcohol (PVA) is water-soluble polymer manufactured by the saponification of polyvinyl acetate. The physical properties and its specific application depend on the degree of hydrolysis. To enhance the properties of different hydrolyzed PVA grades, it is generally chemically modified with various cross-linkers. Here, different degree hydrolyzed PVA grades with enhanced properties were achieved by cross-linking with boric acid. These samples were then characterized by Differential Scanning Calorimetry (DSC) and Gel permeation chromatography (GPC). For further analysis a film of samples were prepared by casting on glass plate. The effects of amount of boric acid and degree of hydrolysis of PVA on performance properties like tensile strength, pencil hardness and thermal properties like glass transition temperature were studied. The results showed that by cross-linking there was an increase in mechanical strength and thermal property.

Preparation of Boric-10 Acid Applied in Nuclear Industry

Because of the superior features of boron-10 isotope in absorbing hot neutrons, boric-10 acid(H310BO3)has been used widely in nuclear industry. Boric-10 acid is obtained from boron-10 trifluoride(10BF3) by esterification and hydrolyzation. In this study, trimethyl borate-10 [(CH3O)310B] was prepared from boron-10 trifluoride(10BF3)through chemical exchange rectification. In addition, the hydrolyzation of trimethyl borate-10 was investigated with different p H values, temperatures and molar ratios of water to trimethyl borate-10. Under the optimum process conditions, high yield of boric-10 acid with nuclear industrial purity grade was realized.

A Wood Preservative Based on Commercial Silica Nanodispersions and Boric Acid against Fungal Decay through Laboratory and Field Tests

The paper is based on the development of a wood preservative without metal salts to be used in use classes 3 and 4 (EN 335), eco-friendly and harmless to humans and animals. Boric acid was used as a biocide, due to its effectiveness against fungi and insects. It is also known to be easily leached from wood exposed to weather action. Colloidal silica was therefore added in the formulations to guarantee the fixation of boric acid to wood. The different formulations were tested for the protective efficacy against decay fungi through laboratory tests (EN 113) and field trials (EN 252). The results were promising, especially those concerning boron fixation and efficacy against decay fungi through laboratory tests, where some formulations and retentions gave a durability class 1 (very durable) according to EN 350-1. The fourth evaluation, after 50 months of field trials showed only a slight difference between the treated samples and controls.