The particle morphology and surface texture play a major role in influencing mechanical and hydraulic behaviors of sandy soils. This paper presents the use of digital image analysis combined with fractal theory as a t...The particle morphology and surface texture play a major role in influencing mechanical and hydraulic behaviors of sandy soils. This paper presents the use of digital image analysis combined with fractal theory as a tool to quantify the particle morphology and surface texture of two types of quartz sands widely used in the region of Vitória, Espírito Santo, southeast of Brazil. The two investigated sands are sampled from different locations. The purpose of this paper is to present a simple, straightforward,reliable and reproducible methodology that can identify representative sandy soil texture parameters.The test results of the soil samples of the two sands separated by sieving into six size fractions are presented and discussed. The main advantages of the adopted methodology are its simplicity, reliability of the results, and relatively low cost. The results show that sands from the coastal spit(BS) have a greater degree of roundness and a smoother surface texture than river sands(RS). The values obtained in the test are statistically analyzed, and again it is confirmed that the BS sand has a slightly greater degree of sphericity than that of the RS sand. Moreover, the RS sand with rough surface texture has larger specific surface area values than the similar BS sand, which agree with the obtained roughness fractal dimensions. The consistent experimental results demonstrate that image analysis combined with fractal theory is an accurate and efficient method to quantify the differences in particle morphology and surface texture of quartz sands.展开更多
Molecular deposition filming flooding (MDFF) is a novel oil recovery technique based on the thermopositive monolayer electrostatic adsorption of the MDFF agent on different interfaces within reservoir systems. In this...Molecular deposition filming flooding (MDFF) is a novel oil recovery technique based on the thermopositive monolayer electrostatic adsorption of the MDFF agent on different interfaces within reservoir systems. In this paper, the adsorption property of the MDFF agent, MD-1, on quartz sand has been studied through adsorption experiments at different pH and temperatures. Experimental data are also analyzed kinetically and thermodynamically. The results show that the adsorption of MD-1 on quartz sand takes place mainly because of electrostatic interactions, which corresponds to adsorption that increases with pH. Kinetic analyses show that at a higher pH the activation energy for adsorption gets lower and, therefore, the adsorption becomes quicker for MD-1 on quartz sand. Thermodynamic analyses show that pH plays an important role in the adsorption of MD-1 on quartz sand. At a higher pH, more negative surface charges result in the increase of electrostatic interactions between MD-1 and quartz sand. Therefore, the saturated adsorption amount increases and more adsorption heat will be released.展开更多
Effects of pH and ionic strength on ciprofloxacin adsorption in quartz sand were studied through a batch equilibrium adsorption experiment in this paper. The experimental data were fitted by empirical formulas from La...Effects of pH and ionic strength on ciprofloxacin adsorption in quartz sand were studied through a batch equilibrium adsorption experiment in this paper. The experimental data were fitted by empirical formulas from Langmuir and Freundlich adsorption isothermal curves, and the transport experiments in quartz sand at different pH and ionic strength were conducted to investigate the transport characteristics of ciprofloxacin. It was found that with the increase of pH value or ionic strength, adsorption capacity of ciprofloxacin decreased, so that it could move easier. The results indicated that low pH or ionic strength was conductive to the adsorption of ciprofloxacin in quartz sand. Meanwhile, a higher initial concentration or stronger ionic strength could result in a smaller linear distribution coefficient of ciprofloxacin, which meant a low adsorption capacity. According to the fitting results, the adsorption of ciprofloxacin in quartz sand could be described well by both Langmuir and Freundlich equations, of which Freundlich equation had a better efficacy.展开更多
This pilot study attempts to demonstrate some underlying scanning electron microscopy themes of quartz grain surface textures. A variety of textural patterns and individual features are described for grains selected f...This pilot study attempts to demonstrate some underlying scanning electron microscopy themes of quartz grain surface textures. A variety of textural patterns and individual features are described for grains selected from various littoral environments. An attempt was made to differentiate samples on surface textures alone, but limitations of using this technique in sedimentological isolation were apparent. Statistical analysis of checklist data and photographic evidence revealed some of the more important feature combinations used in environmental diagnosis. The use of discriminant analysis provided quantitative sample separation.展开更多
Silica is becoming more attractive as plant nutrient for non-graminae crops particularly in relation with drought-stress tolerant. Many efforts have been conducted to obtain an efficient technique to produce silica fe...Silica is becoming more attractive as plant nutrient for non-graminae crops particularly in relation with drought-stress tolerant. Many efforts have been conducted to obtain an efficient technique to produce silica fertilizer worldwide, but the results are varying considerably due to various factors including raw material and extraction technique. This study was carried out to develop an efficient extraction technique for ortho-silicic acid (OSA-H4SiO4) from a Bangka-Belitung quartz sand by employing acid-base dissolution method. A 325-mesh size quartz sand was boiled in HCl solution at various concentrations. The optimum concentration was then used in the following experiment at several different volumes of solution. The sand obtained from optimum concentration and volume of HCl solution was then reacted with different amounts of NaOH (s), and heated until a wet mixture was obtained. As a reference the best extraction conditions were applied to a natural zeolite sample. All OSA analyses were done in triplicates with spectrophotometric method. Supporting evidences were collected from x-ray diffraction and scanning-electron-microscopy analyses of the treated samples. The yield of quartz sand-originated OSA was 183 g·kg-1 and significantly increased linearly with increasing weight of NaOH (R2 = 0.99**), whereas that from zeolite was only 104.2 g·kg-1 at 80 g NaOH. XRD and SEM data confirmed the evidences that the acid-base extraction disrupted the quartz mineral structure and as a consequence releasing more water soluble OSA.展开更多
Hydroquinone (HQ) is the most important hydroxy aromatic compound which is produced on a large scale. Understanding its fate in the environment is therefore of primary importance to prevent its migration in the soil a...Hydroquinone (HQ) is the most important hydroxy aromatic compound which is produced on a large scale. Understanding its fate in the environment is therefore of primary importance to prevent its migration in the soil and/or the contamination of the aquatic ecosystems. Here we present a column based method to investigate the physicochemical processes controlling the removal from the aqueous phase and the adsorption onto natural quartz sand (NQS), of organic pollutant such as HQ molecules. We will focus on the interactions that occur between the organic pollutant and the NQS substrate. Thus, column reactors filled with NQS were used to investigate the influence of physicochemical parameters such as the ionic strength, the pH, the flow rate, and the nature of the electrolyte cation, on the HQ adsorption from water onto NQS substrate. The data indicate that, when divalent instead of monovalent cations, are present in the effluent water injection phase, and/or when the ionic strength of the effluent increases, the adsorbed HQ amount decreases. Similar decrease of the adsorbed HQ amount was also observed, at constant ionic strength, by increasing either, the pH from 3 to 9, the flow rate Q from 1 to 3 ml·mn-1, or by decreasing the HQ initial concentration, C0 from 30 to 6 mg·L-1. Further, large amount of the organic pollutant (up to 93 wt% of HQ molecules) was removed from the effluent water phase by using NQS column. The overall data seem to indicate that the adsorption of HQ molecules on the NQS surface is mainly controlled by electrostatic interaction forces occurring between the organic molecule polar groups and the inorganic matrix silanol groups.展开更多
文摘The particle morphology and surface texture play a major role in influencing mechanical and hydraulic behaviors of sandy soils. This paper presents the use of digital image analysis combined with fractal theory as a tool to quantify the particle morphology and surface texture of two types of quartz sands widely used in the region of Vitória, Espírito Santo, southeast of Brazil. The two investigated sands are sampled from different locations. The purpose of this paper is to present a simple, straightforward,reliable and reproducible methodology that can identify representative sandy soil texture parameters.The test results of the soil samples of the two sands separated by sieving into six size fractions are presented and discussed. The main advantages of the adopted methodology are its simplicity, reliability of the results, and relatively low cost. The results show that sands from the coastal spit(BS) have a greater degree of roundness and a smoother surface texture than river sands(RS). The values obtained in the test are statistically analyzed, and again it is confirmed that the BS sand has a slightly greater degree of sphericity than that of the RS sand. Moreover, the RS sand with rough surface texture has larger specific surface area values than the similar BS sand, which agree with the obtained roughness fractal dimensions. The consistent experimental results demonstrate that image analysis combined with fractal theory is an accurate and efficient method to quantify the differences in particle morphology and surface texture of quartz sands.
文摘Molecular deposition filming flooding (MDFF) is a novel oil recovery technique based on the thermopositive monolayer electrostatic adsorption of the MDFF agent on different interfaces within reservoir systems. In this paper, the adsorption property of the MDFF agent, MD-1, on quartz sand has been studied through adsorption experiments at different pH and temperatures. Experimental data are also analyzed kinetically and thermodynamically. The results show that the adsorption of MD-1 on quartz sand takes place mainly because of electrostatic interactions, which corresponds to adsorption that increases with pH. Kinetic analyses show that at a higher pH the activation energy for adsorption gets lower and, therefore, the adsorption becomes quicker for MD-1 on quartz sand. Thermodynamic analyses show that pH plays an important role in the adsorption of MD-1 on quartz sand. At a higher pH, more negative surface charges result in the increase of electrostatic interactions between MD-1 and quartz sand. Therefore, the saturated adsorption amount increases and more adsorption heat will be released.
文摘Effects of pH and ionic strength on ciprofloxacin adsorption in quartz sand were studied through a batch equilibrium adsorption experiment in this paper. The experimental data were fitted by empirical formulas from Langmuir and Freundlich adsorption isothermal curves, and the transport experiments in quartz sand at different pH and ionic strength were conducted to investigate the transport characteristics of ciprofloxacin. It was found that with the increase of pH value or ionic strength, adsorption capacity of ciprofloxacin decreased, so that it could move easier. The results indicated that low pH or ionic strength was conductive to the adsorption of ciprofloxacin in quartz sand. Meanwhile, a higher initial concentration or stronger ionic strength could result in a smaller linear distribution coefficient of ciprofloxacin, which meant a low adsorption capacity. According to the fitting results, the adsorption of ciprofloxacin in quartz sand could be described well by both Langmuir and Freundlich equations, of which Freundlich equation had a better efficacy.
文摘This pilot study attempts to demonstrate some underlying scanning electron microscopy themes of quartz grain surface textures. A variety of textural patterns and individual features are described for grains selected from various littoral environments. An attempt was made to differentiate samples on surface textures alone, but limitations of using this technique in sedimentological isolation were apparent. Statistical analysis of checklist data and photographic evidence revealed some of the more important feature combinations used in environmental diagnosis. The use of discriminant analysis provided quantitative sample separation.
文摘Silica is becoming more attractive as plant nutrient for non-graminae crops particularly in relation with drought-stress tolerant. Many efforts have been conducted to obtain an efficient technique to produce silica fertilizer worldwide, but the results are varying considerably due to various factors including raw material and extraction technique. This study was carried out to develop an efficient extraction technique for ortho-silicic acid (OSA-H4SiO4) from a Bangka-Belitung quartz sand by employing acid-base dissolution method. A 325-mesh size quartz sand was boiled in HCl solution at various concentrations. The optimum concentration was then used in the following experiment at several different volumes of solution. The sand obtained from optimum concentration and volume of HCl solution was then reacted with different amounts of NaOH (s), and heated until a wet mixture was obtained. As a reference the best extraction conditions were applied to a natural zeolite sample. All OSA analyses were done in triplicates with spectrophotometric method. Supporting evidences were collected from x-ray diffraction and scanning-electron-microscopy analyses of the treated samples. The yield of quartz sand-originated OSA was 183 g·kg-1 and significantly increased linearly with increasing weight of NaOH (R2 = 0.99**), whereas that from zeolite was only 104.2 g·kg-1 at 80 g NaOH. XRD and SEM data confirmed the evidences that the acid-base extraction disrupted the quartz mineral structure and as a consequence releasing more water soluble OSA.
文摘Hydroquinone (HQ) is the most important hydroxy aromatic compound which is produced on a large scale. Understanding its fate in the environment is therefore of primary importance to prevent its migration in the soil and/or the contamination of the aquatic ecosystems. Here we present a column based method to investigate the physicochemical processes controlling the removal from the aqueous phase and the adsorption onto natural quartz sand (NQS), of organic pollutant such as HQ molecules. We will focus on the interactions that occur between the organic pollutant and the NQS substrate. Thus, column reactors filled with NQS were used to investigate the influence of physicochemical parameters such as the ionic strength, the pH, the flow rate, and the nature of the electrolyte cation, on the HQ adsorption from water onto NQS substrate. The data indicate that, when divalent instead of monovalent cations, are present in the effluent water injection phase, and/or when the ionic strength of the effluent increases, the adsorbed HQ amount decreases. Similar decrease of the adsorbed HQ amount was also observed, at constant ionic strength, by increasing either, the pH from 3 to 9, the flow rate Q from 1 to 3 ml·mn-1, or by decreasing the HQ initial concentration, C0 from 30 to 6 mg·L-1. Further, large amount of the organic pollutant (up to 93 wt% of HQ molecules) was removed from the effluent water phase by using NQS column. The overall data seem to indicate that the adsorption of HQ molecules on the NQS surface is mainly controlled by electrostatic interaction forces occurring between the organic molecule polar groups and the inorganic matrix silanol groups.
