Study Progress Analysis of Effluent Quality Prediction in Activated Sludge Process Based on CiteSpace

In this paper, CiteSpace, a bibliometrics software, was adopted to collect research papers published on the Web of Science, which are relevant to biological model and effluent quality prediction in activated sludge process in the wastewater treatment. By the way of trend map, keyword knowledge map, and co-cited knowledge map, specific visualization analysis and identification of the authors, institutions and regions were concluded. Furthermore, the topics and hotspots of water quality prediction in activated sludge process through the literature-co-citation-based cluster analysis and literature citation burst analysis were also determined, which not only reflected the historical evolution progress to a certain extent, but also provided the direction and insight of the knowledge structure of water quality prediction and activated sludge process for future research.

Intercross real-time control strategy in alternating activated sludge process for short-cut biological nitrogen removal treating domestic wastewater

To develop technically feasible and economically favorable dynamic process control(DPC)strategies for an alternating activated sludge(AAS)system,a bench-scale continuous-flow alternating aerobic and anoxic reactor,performing short-cut nitrogen removal from real domestic wastewater was operated under different control strategies for more than five months.A fixed-time control(FTC) study showed that bending-points on pH and oxidation-reduction potential(ORP)profiles accurately coincided with the major biologic...

Enhanced biological nutrient removal in modified carbon source division anaerobic anoxic oxic process with return activated sludge pre-concentration

A pilot-scale modified carbon source division anaerobic anoxic oxic(AAO) process with pre-concentration of returned activated sludge(RAS) was proposed in this study for the enhanced biological nutrient removal(BNR) of municipal wastewater with limited carbon source. The influent carbon source was fed in step while a novel RAS pre-concentration tank was adopted to improve BNR efficiency, and the effects of an influent carbon source distribution ratio and a RAS pre-concentration ratio were investigated. The results show that the removal efficiency of TN is mainly influenced by the carbon source distribution ratio while the TP removal relies on the RAS pre-concentration ratio. The optimum carbon source distribution ratio and RAS pre-concentration ratio are 60% and 50%, respectively, with an inner recycling ratio of 100% under the optimum steady operation of pilot test, reaching an average effluent TN concentration of 9.8 mg·L-1with a removal efficiency of 63% and an average TP removal efficiency of 94%. The mechanism of nutrient removal is discussed and the kinetics is analyzed. The results reveal that the optimal carbon source distribution ratio provides sufficient denitrifying carbon source to each anoxic phase, reducing nitrate accumulation while the RAS pre-concentration ratio improves the condition of anaerobic zone to ensure the phosphorus release due to less nitrate in the returned sludge. Therefore, nitrifying bacteria, denitrifying bacteria and phosphorus accumulation organisms play an important role under the optimum condition, enhancing the performance of nutrient removal in this test.

Comparison of heavy metal removal efficiencies in four activated sludge processes

The removal efficiencies of heavy metals(As, Cr, Cu, Ni, Pb and Zn) were investigated in the 17 operating municipal wastewater treatment plants(WWTPs) and compared with those in four main activated sludge processes. Significant differences of heavy metal removal efficiencies were observed among four activated sludge processes. The removal efficiency for As(75.5%) in the oxidation ditch(OD) process is significantly higher than that in the conventional activated sludge(CAS) process(38.6%) or sequencing batch reactor(SBR) process(51.4%). The mean removal efficiencies for Cu and Ni in the OD process are 90.5% and 46.7%, respectively, while low mean removal efficiencies are observed for Cu(69.9%) and Ni(16.5%), respectively, in the SBR process. The removal efficiencies for Cu and Ni in the OD process are significantly higher than those in the anaerobic-anoxic-oxic(A2-O) process. These results highlight the differences of removal efficiencies for heavy metals in different processes and should be considered when selecting a wastewater treatment process.

Stoichiometric deduction of activated sludge process for organic carbon and nitrogen removal

The activated sludge process （ASP） is the most generally applied biological wastewater treatment method. The ASP for the removal of organic carbon and nitrogen can be looked as the combination of eight processes. In order to set up an ASP model, the stoichiometric coefficients should be deduced so that the stoichiometric matrix can be presented. The important assumptions and simplifications behind the model for ASP are enumerated. Using the matrix, mass balance equation and consistent units, the stoichiometric coefficients in the eight processes are exclusively deduced one by one.

Combined process of sequencing batch reactor activated sludge process and constructed wetland for domestic wastewater treatment

By combining sequencing batch reactor (SBR) activated sludge process and constructed wetland (CW), this study is to achieve the domestic wastewater treatment. Our purpose was to determine the optimum operating parameters of the combined process. The process involved advantages and shortages of SBR and CW. Under normal temperature, the 3rd cycle (SBR’s operation cycle is 8 h: inflow for 1 h, limited aeration for 3 h, sediment for 1 h, outflow for 1 h, and idling for 2 h; CW’s hydraulic retention time (HRT) is 24.8 h and hydraulic loading is 24.5 m3/m2 d) was the best cyclic mode. The effluents can meet the standard GB/T18921-2002: "The reuse of urban recycling water: water quality standard for scenic environment use". In the 3rd cycle, the efficiency of CW was the maximum, and energy consumption of SBR was the minimum. Under the condition of low dissolved oxygen, the removing efficiency of chemical oxygen demand (COD) and ammonia was not affected obviously. Simultaneously, nitrification and denitrification phenomena occured and phosphorus was absorbed obviously.

Kinetics of aerobically activated sludge on terylene artificial silk printing and dyeing wastewater treatment

Aerobically activated sludge processing was carried out to treat terylene artificial silk printing and dyeing wastewater (TPD wastewater) in a lab-scale experiment, focusing on the kinetics of the COD removal. The kinetics pa-rameters determined from experiment were applied to evaluate the biological treatability of wastewater. Experiments showed that COD removal could be divided into two stages, in which the ratio BOD/COD (B/C) was the key factor for stage division. At the rapid-removal stage with B/C>0.1, COD removal could be described by a zero order reaction. At the mod-erate-removal stage with B/C<0.1, COD removal could be described by a first order reaction. Then Monod equation was introduced to indicate COD removal. The reaction rate constant (K) and half saturation constant (KS) were 0.0208-0.0642 L/(gMLSS)h and 0.44-0.59 (gCOD)/L respectively at 20 C-35 C. Activation energy (Ea) was 6.05104 J/mol. By comparison of kinetic parameters, the biological treatability of TPD wastewater was superior to that of traditional textile wastewater. But COD removal from TPD-wastewater was much more difficult than that from domestic and industrial wastewater, such as papermaking, beer, phenol wastewater, etc. The expected effluent quality strongly related to un-biodegradable COD and kinetics rather than total COD. The results provide useful basis for further scaling up and efficient operation of TPD wastewater treatment.

城市污水处理过程污泥膨胀识别与抑制综述

污泥膨胀是活性污泥法污水处理过程中常见的一类异常工况,且具有严重危害性,研究污泥膨胀的识别和抑制方法对城市污水处理过程正常运行意义重大.本文主要针对城市污水处理过程中污泥膨胀的识别和抑制方法进行综述.首先,文章概述了城市污水处理过程,介绍了污泥膨胀的概念、主要特点、类型和成因;其次,概述了基于微生物生理特征、机理模型、图像识别和数据驱动的污泥膨胀识别方法,分析其发展现状并指出优缺点;然后,概述了基于过程调控和机理特征的污泥膨胀抑制方法,分析其发展现状并对比优缺点;最后,总结全文,指出了城市污水处理过程污泥膨胀识别和抑制面临的主要问题,并对其研究趋势进行了展望.

Experimental study on pressurized activated sludge process for high concentration pesticide wastewater

Pressurized biochemical process derived from traditional activated sludge processes is an innovative technology for wastewater treatment. The main advantage of the pressurized process is that the oxygen transfer barrier can be overcome by increasing the dissolved oxygen level. In this study, high concentration pesticide wastewater was treated by pressurized activated sludge process. It was found that the removal of chemical oxygen demand （COD） increased steadily with the increase of operating pressure, aeration time, and sludge concentration. When the operation pressure was 0.30 MPa and the aeration time was 6 hr, 85.0%-92.5% COD, corresponding to an effluent COD of 230-370 mg/L, was removed from an influent COD of 2500-5000 mg/L. The obtained outlet COD concentration was lower than 350-450 mg/L for the identical process operated under the atmospheric pressure. In addition, pressurized biochemical process could produce a higher COD volumetric loading rate at 5.8-7.6 kg COD/（m^3.day）, compared with 2.0-2.8 kg COD/（ma.day） using the same equipment at the atmospheric pressure. The COD concentration followed a modified Monod model with Vmax 2.31 day-1 and Ks 487 mg/L.

A new process to improve short-chain fatty acids and bio-methane generation from waste activated sludge

As an important intermediate product, short-chain fatty acids（SCFAs） can be generated after hydrolysis and acidification from waste activated sludge, and then can be transformed to methane during anaerobic digestion process. In order to obtain more SCFA and methane,most studies in literatures were centered on enhancing the hydrolysis of sludge anaerobic digestion which was proved as un-efficient. Though the alkaline pretreatment in our previous study increased both the hydrolysis and acidification processes, it had a vast chemical cost which was considered uneconomical. In this paper, a low energy consumption pretreatment method, i.e. enhanced the whole three stages of the anaerobic fermentation processes at the same time, was reported, by which hydrolysis and acidification were both enhanced, and the SCFA and methane generation can be significantly improved with a small quantity of chemical input. Firstly, the effect of different pretreated temperatures and pretreatment time on sludge hydrolyzation was compared. It was found that sludge pretreated at 100°C for 60 min can achieve the maximal hydrolyzation. Further, effects of different initial p Hs on acidification of the thermal pretreated sludge were investigated and the highest SCFA was observed at initial p H 9.0with fermentation time of 6 d, the production of which was 348.63 mg COD/g VSS（6.8 times higher than the blank test） and the acetic acid was dominant acid. Then, the mechanisms for this new pretreatment significantly improving SCFA production were discussed. Finally,the effect of this low energy consumption pretreatment on methane generation was investigated.

高效包埋好氧颗粒污泥在农药废水处理中的应用研究

为了高效处理有毒有害的农药废水,研究了包埋好氧颗粒污泥对实际农药废水的处理效果,并对比了包埋好氧颗粒污泥、市政好氧污泥及两者混合体系在实际农药废水活性污泥法处理中的表现。结果表明:在实际农药废水处理中,市政好氧污泥的硝化速率和COD降解速率分别为0.67 mg[N]/(g[SS]·h)和3.54 mg[COD]/(g[SS]·h),两者混合体系的平均硝化速率和COD降解速率分别为5.0 mg[N]/(g[包埋颗粒]·h)和49.05 mg[COD]/(g[包埋颗粒]·h),而包埋好氧颗粒污泥的平均COD降解速率为91.14 mg[COD]/(g[包埋颗粒]·h),并且具有更好的硝化性能,平均硝化速率为18.8 mg[N]/(g[SS]·h)。包埋好氧颗粒污泥对农药废水表现出较强的耐冲击负荷能力,说明了包埋好氧颗粒污泥的投加对提高农药废水氨氮降解效果显著。

Comparative study of two biological nitrogen removal processes:A/O process and step-feeding process

Two biological nitrogen removal processes are compared in the aspect of nitrogen removal, process operation and energy saving. Results show that when the returned sludge ratio is 50% of the inflow rate, the step-feeding process achieves over 80% total nitrogen （TN） removal efficiency, but the TN removal efficiency of the A/O process is only 40%. Moreover, filamentous sludge bulking can be well restrained in the step-feeding process. Given the conditions of a returned sludge ratio of 100% and a nitrifying liquor recycle ratio of 200%, the TN removal efficiency is 78.32% in the A/O process, but the sludge volume index （SVI） value increases to 143 mL/g. In the step-feeding process, the SVI is only 94.4 mL/g when the TN removal efficiency reaches 81. 1%. The step-feeding process has distinct advantages over the A/O process in the aspects of practicability, nitrogen removal and operating stability.

活性污泥法污水处理技术在上海的早期传入与实践

20世纪初,上海公共租界工部局为了解决抽水马桶带来的水环境问题,邀请英国化学家福勒来沪进行考察,提出结合活性污泥法的处理方案。文章以活性污泥法污水处理技术传入上海的过程为重点,分析了福勒提出活性污泥法方案的过程,梳理了工程师前往美国、加拿大考察并评估该技术在上海的适用性,探讨了活性污泥法落地上海,建造污水处理实验室的情况。这是活性污泥法首次进入上海,也是第一次传入中国,促进了近代上海的城市现代化建设。活性污泥法在上海的传入,反应了技术移植过程中的常规程序,即提出方案、调研与选择、探索实践模式。活性污泥法的引入,是近代技术进入中国的典型案例。

3株高效石油降解菌对SBR处理含油废水的强化作用

研究了3株不同高效石油降解菌株用于序批式活性污泥法(SBR)处理含油废水的效果。结果表明,投加菌液苍白杆菌FP1、假单胞菌X1、红平红球菌KB1的SBR,COD平均去除率分别为90.8%、92.8%、98.2%;石油类物质平均去除率分别为79.1%、80.0%、92.8%;NH_(4)^(+)-N平均去除率分别为87.5%、91.4%、94.7%;TP平均去除率分别为23.8%、30.9%、44.4%。与未投加石油降解菌相比,投加石油降解菌株能显著提高SBR对含油废水中各污染物的去除效率,同时系统运行稳定,耐冲击负荷能力高。实验结果还表明在SBR中投加Fe Cl3利用化学除磷协助生物除磷可提高系统对TP的去除率,同时提高活性污泥的絮凝沉降性能,增加系统内活性生物量。该研究为生物强化SBR处理含油废水的工艺设计与设备运行提供了参考,石油降解菌强化SBR技术有望应用于含油废水生物处理。

污水生化处理工艺发展阶段化技术特征及未来趋势

百余年来,伴随人类社会和科技日新月异,污水生化处理技术也在实现快速发展与不断迭代,新工艺与新反应器、新功能微生物与新生化代谢途径不断被提出、发现和解析,并进一步推动了污水处理技术的进步与升级。回顾了过去百余年污水生化处理技术发展历程,就典型污水生化工艺,结合技术研发进展、技术成熟度及案例应用情况,给出了不同生化处理工艺代际划分与技术发展期“S曲线”,分析了近些年来新涌现出的一些革新性污水生化处理工艺的技术原理、技术特征,结合实际案例分析了工艺技术特征、技术优势与总体效能,从工艺强化、绿色低碳与集约高效等方面总结了未来污水处理发展的技术趋势,以期为“双碳背景”下排水系统提质增效工作、未来国内前瞻性污水厂工艺设计与运行提供参考和借鉴。

基于高负荷活性污泥法城市污水碳捕获研究进展

首先综述了HRAS工艺特点,对溶解氧(DO)、污泥龄(SRT)等工艺参数对碳捕获效率的影响进行了总结;其次阐明了工艺碳重定向路径与碳捕获机理;然后介绍了化学强化高负荷活性污泥法(CEHRAS)等组合工艺的研究进展;最后提出了急需解决的问题并阐述了未来的发展前景。

活性污泥法处理城市污水研究进展

污水处理是防治水污染的重要方法,现今中国城市污水处理主要是以生物处理法为主。活性污泥法处理污水是城市污水处理中使用最普遍的一种生物方法。针对城市污水水质变化大、所含污染物种类复杂等特点,分析活性污泥法运行的影响因素,阐述并总结活性污泥法通过好氧微生物的吸附、凝聚、沉淀和分解污水中的有机物质、胶体及溶解性物质的研究进程,同时提出有关活性污泥法处理城市污水的研究建议及展望。

餐厨垃圾和剩余污泥协同处理研究进展

餐厨垃圾和剩余污泥单独处理效率较低,协同处理可以更加高效地资源化利用。本文通过对好氧堆肥、厌氧消化、焚烧/热解等技术协同处理餐厨垃圾和剩余污泥的进展进行分析,探讨了物料比、抑制物质如脂质、盐分、重金属,添加物质如有益菌、生物炭、微量元素对餐厨垃圾和剩余污泥协同处理的效果,旨在为餐厨垃圾和剩余污泥资源化利用提供参考。

城市污水处理不同序批式活性污泥法的工艺特点和功能差异分析

城市污水处理是保障城市环境卫生和健康的重要环节,而序批式活性污泥法作为一种常用的污水处理技术,具有灵活、高效、适应性强的特点。然而,不同的序批式活性污泥法在工艺特点、功能差异、优缺点以及应用场景上存在差异。因此,对这些技术进行深入研究和比较,对于选择适合的污水处理工艺具有重要意义。

基于离子液体的菌藻类胡萝卜素提取工艺研究

以含有粘红酵母和小球藻的菌藻泥为原料,通过单因素试验和响应面试验对菌藻类胡萝卜素提取工艺进行优化,并考查菌藻类胡萝卜素的体外抗氧化活性。结果表明:菌藻破壁的最优离子液体为1-丁基-3-甲基咪唑氯化物(BMIMCl),菌藻类胡萝卜素的最佳提取工艺为离子液体浓度1 mol/L、预处理温度53℃和预处理时间57 min,在该条件下,菌藻类胡萝卜素的提取量为1.311 mg/g;当质量浓度为30μg/mL时,菌藻类胡萝卜素对DPPH自由基、·OH自由基和ABTS^(+)自由基的清除率分别为82.3%、37.6%、和86.8%,还原力为0.289,表现出较好的抗氧化活性。因此,经BMIMCl破壁处理后,从菌藻泥中提取的类胡萝卜素含量更高,抗氧化活性也较好。