In this work,an old scanning electron microscope(SEM)is refurbished to enhance its image processing capability.How to digitally sample and process an analog image is also presented.An NI PCI-6259 multiple input/output...In this work,an old scanning electron microscope(SEM)is refurbished to enhance its image processing capability.How to digitally sample and process an analog image is also presented.An NI PCI-6259 multiple input/output data acquisition(DAQ)board is used to acquire signals originally being sent to an analog display,and then convert the signals into a digital image.Two output channels are used for raster scan of the horizontal and verticle axes of the image buffer,while one input channel is used to read the brightness signals at various coordinate points.Synchronous method is used to maximize the DAQ speed.Finally,the digitally buffered images are read out to display and saved in a hard drive.The hardware and software designs of this work are explained in great detail,which can serve as a very good example for fast synchronous DAQ,advanced virtual instrument design and structural driver programming with LabVIEW.展开更多
The coarse pore system, interfacial transition zone （ITZ） between aggregate and paste matrix and volume fraction of unhydrated cement in concrete （w/c=0.3） containing mineral admixtures were quantitatively charact...The coarse pore system, interfacial transition zone （ITZ） between aggregate and paste matrix and volume fraction of unhydrated cement in concrete （w/c=0.3） containing mineral admixtures were quantitatively characterized by the scanning electron microscope-backscattered electron （SEM-BSE） image analysis technique. The experimental results show that compound addition of slag and fly ash decreases the coarse porosity from 10.17% to 3.74% and the threshold diameter of coarse pore size from 345 μm to 105 μm compared with concrete （w/c=0.30） without mineral admixtures; Moreover with compound addition of fly ash and slag, the volume proportion of unhydrated cement in paste matrix is reduced by 30%, the maximum amount of coarse pores in the ITZ between aggregate and paste decreases from 13.11% to 5.57% and the thickness of ITZ is reduced by 37% , compared with concrete without mineral admixtures.展开更多
Recent advances in the ultrafast transmission electron microscope （UTEM）, with combined spatial and temporal resolutions, have made it possible to directly visualize the atomic, electronic, and magnetic structural d...Recent advances in the ultrafast transmission electron microscope （UTEM）, with combined spatial and temporal resolutions, have made it possible to directly visualize the atomic, electronic, and magnetic structural dynamics of materials. In this review, we highlight the recent progress of UTEM techniques and their applications to a variety of material systems. It is emphasized that numerous significant ultrafast dynamic issues in material science can be solved by the integration of the pump-probe approach with the well-developed conventional transmission electron microscopy （TEM） techniques. For instance, UTEM diffraction experiments can be performed to investigate photoinduced atomic-scale dynamics, including the chemical reactions, non-equilibrium phase transition/melting, and lattice phonon coupling. UTEM imaging methods are invaluable for studying, in real space, the elementary processes of structural and morphological changes, as well as magnetic-domain evolution in the Lorentz TEM mode, at a high magnification. UTEM electron energy-loss spectroscopic techniques allow the examination of the ultrafast valence states and electronic structure dynamics, while photoinduced near-field electron microscopy extends the capability of the UTEM to the regime of electromagnetic-field imaging with a high real space resolution.展开更多
Steve Pennycook is a pioneer in the application of high-resolution scanning transmission electron microscopy(STEM)and in particular the use of annular dark-field(ADF)imaging.Here we show how a general framework for 4D...Steve Pennycook is a pioneer in the application of high-resolution scanning transmission electron microscopy(STEM)and in particular the use of annular dark-field(ADF)imaging.Here we show how a general framework for 4D STEM allows clear links to be made between ADF imaging and the emerging methods for reconstructing images from 4D STEM data sets.We show that both ADF imaging and ptychographical reconstruction can be thought of in terms of integrating over the overlap regions of diffracted discs in the detector plane.This approach allows the similarities in parts of their transfer functions to be understood,though we note that the transfer functions for ptychographic imaging cannot be used as a measure of information transfer.We also show that conditions of partial spatial and temporal coherence affect ADF imaging and ptychography similarly,showing that achromatic interference can always contribute to the image in both cases,leading to a robustness to partial temporal coherence that has enabled high-resolution imaging.展开更多
Sediment accumulation on the bed of open sewers and drains reduces hydraulic efficiency and can cause localized flooding.Slotted invert traps installed underneath the bed of open sewers and drains can eliminate sedime...Sediment accumulation on the bed of open sewers and drains reduces hydraulic efficiency and can cause localized flooding.Slotted invert traps installed underneath the bed of open sewers and drains can eliminate sediment build-up by catching sediment load.Previous three-dimensional(3D)computational studies have examined the particle trapping performance of invert traps of different shapes and depths under varied sediment and flow conditions,considering particles as spheres.For two-dimensional and 3D numerical modeling,researchers assumed the lid geometry to be a thin line and a plane,respectively.In this 3D numerical study,the particle trapping efficiency of a slotted irregular hexagonal invert trap fitted at the flume bottom was examined by incorporating the particle shape factor of non-spherical sewage solid particles and the thicknesses of upstream and downstream lids over the trap in the discrete phase model of the ANSYS Fluent 2020 R1 software.The volume of fluid(VOF)and the realizable k-turbulence models were used to predict the velocity field.The two-dimensional particle image velocimetry(PIV)was used to measure the velocity field inside the invert trap.The results showed that the thicknesses of upstream and downstream lids affected the velocity field and turbulent kinetic energy at all flow depths.The joint impact of the particle shape factor and lid thickness on the trap efficiency was significant.When both the lid thickness and particle shape factor were considered in the numerical modeling,trap efficiencies were underestimated,with relative errors of-8.66%to-0.65%in comparison to the experimental values of Mohsin and Kaushal(2017).They were also lower than the values predicted by Mohsin and Kaushal(2017),which showed an overall overestimation with errors of-2.3%to 17.4%.展开更多
目的研究一种表征可吸收胶原蛋白材料微观形貌的方法,并分析其孔隙率和孔径。方法利用场发射扫描电子显微镜(Scanning Electron Microscope,SEM),在不同的加速电压下对未喷金样品和喷金样品进行拍摄,使用Image J软件对所得的SEM图像的...目的研究一种表征可吸收胶原蛋白材料微观形貌的方法,并分析其孔隙率和孔径。方法利用场发射扫描电子显微镜(Scanning Electron Microscope,SEM),在不同的加速电压下对未喷金样品和喷金样品进行拍摄,使用Image J软件对所得的SEM图像的孔隙率和孔径进行分析,并对结果的有效性进行验证。结果样品未喷金时使用低倍加速电压可获得清晰的SEM图像;样品喷金后其耐受电压能力明显提高,即使在较高的加速电压下依然能获得清晰的SEM图像。使用Image J软件可对拍摄的SEM图像的孔径和孔隙率进行分析,其中,平均孔隙率为50.9%,平均孔径为11.9μm;孔隙率离散系数为8.6%,孔径离散系数6.7%。结论场发射SEM结合Image J软件是一种表征可吸收胶原蛋白材料孔结构的有效方法,可解决相关标准中方法缺失的问题。展开更多
文摘In this work,an old scanning electron microscope(SEM)is refurbished to enhance its image processing capability.How to digitally sample and process an analog image is also presented.An NI PCI-6259 multiple input/output data acquisition(DAQ)board is used to acquire signals originally being sent to an analog display,and then convert the signals into a digital image.Two output channels are used for raster scan of the horizontal and verticle axes of the image buffer,while one input channel is used to read the brightness signals at various coordinate points.Synchronous method is used to maximize the DAQ speed.Finally,the digitally buffered images are read out to display and saved in a hard drive.The hardware and software designs of this work are explained in great detail,which can serve as a very good example for fast synchronous DAQ,advanced virtual instrument design and structural driver programming with LabVIEW.
文摘The coarse pore system, interfacial transition zone （ITZ） between aggregate and paste matrix and volume fraction of unhydrated cement in concrete （w/c=0.3） containing mineral admixtures were quantitatively characterized by the scanning electron microscope-backscattered electron （SEM-BSE） image analysis technique. The experimental results show that compound addition of slag and fly ash decreases the coarse porosity from 10.17% to 3.74% and the threshold diameter of coarse pore size from 345 μm to 105 μm compared with concrete （w/c=0.30） without mineral admixtures; Moreover with compound addition of fly ash and slag, the volume proportion of unhydrated cement in paste matrix is reduced by 30%, the maximum amount of coarse pores in the ITZ between aggregate and paste decreases from 13.11% to 5.57% and the thickness of ITZ is reduced by 37% , compared with concrete without mineral admixtures.
基金Project supported by the National Basic Research Program of China(Grant No.2015CB921300)the National Key Research and Development Program of China(Grant Nos.2016YFA0300300,2017YFA0504703,and 2017YFA0302900)+3 种基金the National Natural Science Foundation of China(Grant Nos.11604372,11474323,and 11774391)the”Strategic Priority Research Program(B)”of the Chinese Academy of Sciences(Grant No.XDB07020000)the Scientific Instrument Developing Project of the Chinese Academy of Sciences(Grant No.ZDKYYQ20170002)the financial support of the Hundred Talent Program B from CAS
文摘Recent advances in the ultrafast transmission electron microscope （UTEM）, with combined spatial and temporal resolutions, have made it possible to directly visualize the atomic, electronic, and magnetic structural dynamics of materials. In this review, we highlight the recent progress of UTEM techniques and their applications to a variety of material systems. It is emphasized that numerous significant ultrafast dynamic issues in material science can be solved by the integration of the pump-probe approach with the well-developed conventional transmission electron microscopy （TEM） techniques. For instance, UTEM diffraction experiments can be performed to investigate photoinduced atomic-scale dynamics, including the chemical reactions, non-equilibrium phase transition/melting, and lattice phonon coupling. UTEM imaging methods are invaluable for studying, in real space, the elementary processes of structural and morphological changes, as well as magnetic-domain evolution in the Lorentz TEM mode, at a high magnification. UTEM electron energy-loss spectroscopic techniques allow the examination of the ultrafast valence states and electronic structure dynamics, while photoinduced near-field electron microscopy extends the capability of the UTEM to the regime of electromagnetic-field imaging with a high real space resolution.
基金funding from the European Research Council(ERC)under the European Union’s Horizon 2020 Research and Innovation Programme via Grant Agreement No.802123-HDEM(TJP)from the UK Engineering and Physical Sciences Research Council(EPSRC)via grant EP/M010708/1(PDN).
文摘Steve Pennycook is a pioneer in the application of high-resolution scanning transmission electron microscopy(STEM)and in particular the use of annular dark-field(ADF)imaging.Here we show how a general framework for 4D STEM allows clear links to be made between ADF imaging and the emerging methods for reconstructing images from 4D STEM data sets.We show that both ADF imaging and ptychographical reconstruction can be thought of in terms of integrating over the overlap regions of diffracted discs in the detector plane.This approach allows the similarities in parts of their transfer functions to be understood,though we note that the transfer functions for ptychographic imaging cannot be used as a measure of information transfer.We also show that conditions of partial spatial and temporal coherence affect ADF imaging and ptychography similarly,showing that achromatic interference can always contribute to the image in both cases,leading to a robustness to partial temporal coherence that has enabled high-resolution imaging.
文摘Sediment accumulation on the bed of open sewers and drains reduces hydraulic efficiency and can cause localized flooding.Slotted invert traps installed underneath the bed of open sewers and drains can eliminate sediment build-up by catching sediment load.Previous three-dimensional(3D)computational studies have examined the particle trapping performance of invert traps of different shapes and depths under varied sediment and flow conditions,considering particles as spheres.For two-dimensional and 3D numerical modeling,researchers assumed the lid geometry to be a thin line and a plane,respectively.In this 3D numerical study,the particle trapping efficiency of a slotted irregular hexagonal invert trap fitted at the flume bottom was examined by incorporating the particle shape factor of non-spherical sewage solid particles and the thicknesses of upstream and downstream lids over the trap in the discrete phase model of the ANSYS Fluent 2020 R1 software.The volume of fluid(VOF)and the realizable k-turbulence models were used to predict the velocity field.The two-dimensional particle image velocimetry(PIV)was used to measure the velocity field inside the invert trap.The results showed that the thicknesses of upstream and downstream lids affected the velocity field and turbulent kinetic energy at all flow depths.The joint impact of the particle shape factor and lid thickness on the trap efficiency was significant.When both the lid thickness and particle shape factor were considered in the numerical modeling,trap efficiencies were underestimated,with relative errors of-8.66%to-0.65%in comparison to the experimental values of Mohsin and Kaushal(2017).They were also lower than the values predicted by Mohsin and Kaushal(2017),which showed an overall overestimation with errors of-2.3%to 17.4%.
