Research of CBR, DM and smart algorithms based design methods for high-rise building structure form-selection

First, the high-rise building structure design process is divided into three relevant steps, that is, scheme generation and creation, performance evaluation, and scheme optimization. Then with the application of relational database, the case database of high-rise structures is constructed, the structure form-selection designing methods such as the smart algorithm based on CBR, DM, FINS, NN and GA is presented, and the original forms system of this method and its general structure are given. CBR and DM are used to generate scheme candidates; FINS and NN to evaluate and optimize the scheme performance; GA to create new structure forms. Finally, the application cases are presented, whose results fit in with the real project. It proves by combining and using the expert intelligence, algorithm intelligence and machine intelligence that this method makes good use of not only the engineering project knowledge and expertise but also much deeper knowledge contained in various engineering cases. In other words, it is because the form selection has a strong background support of vast real cases that its results prove more reliable and more acceptable. So the introduction of this method provides an effective approach to improving the quality, efficiency, automatic and smart level of high-rise structures form selection design.

“3 Degrees and 8 Combinations” Teaching Mode of Anti-Seismic Design of Building Structures

Earthquakes pose a significant threat to people’s property and personal safety.Improving the teaching of civil engineering and building structure anti-seismic design courses can enable students to do a good job in anti-seismic design in the future and effectively reduce the damage on buildings caused by earthquakes.In this paper,we analyzed the basic characteristics of a course in civil engineering major,which is Anti-Seismic Design of Building Structures,and the shortcomings of traditional teaching.It is proposed that the 3-degrees and 8-combinations teaching mode of anti-seismic design of building structures can effectively improve students’autonomy and enthusiasm in learning,helps to cultivate professional ethics among students,and improve their ability to apply what they have learned.

Discussion on seismic design of high-rise building structure in China

With the rapid development of China＇s economy, the modernization drive and the process of urbanization continue to advance, land for urban construction is becoming more and tenser and land prices are rising steadily, there are more and more high-rise buildings, its density is also increasing. With the increasing number trend of high-rise building development, anti-seismic building requirement as an important part of architectural design is worthy of our exploration and study. Seismic resistance has become an important subject of engineering design. This paper will discuss the technical principle of seismic design in building structure design, so as to optimize the seismic design of high-rise building structure better.

Construction of Teaching Case Base of Anti-Seismic Design of Building Structure

Anti-Seismic Design of Building Structures is an important course in civil engineering majors,and it is also a course that pays equal attention to theory and practice.Therefore,by establishing a case base for Anti-Seismic Design of Building Structures,the obscure theoretical knowledge can be taught to students in the form of examples,and the knowledge becomes intuitive.In this way,the students’understanding of anti-seismic design theory and the efficiency of teaching can be improved,and the students’interest in learning can be stimulated.

Vibration Control of a High-Rise Building Structure:Theory and Experiment

In this study,an innovative solution is developed for vibration suppression of the high-rise building.The infinite dimensional system model has been presented for describing high-rise building structures which have a large inertial load with the help of the Hamilton’s principle.On the basis of this system model and with the use of the Lyapunov’s direct method,a boundary controller is proposed and the closed-loop system is uniformly bounded in the time domain.Finally,by using the Smart Structure laboratory platform which is produced by Quancer,we conduct a set of experiments and find that the designed method is resultful.

Safety analysis of optimal outriggers location in high-rise building structures

This paper presents the restraining moments of outriggers acting on the core wall and the equation of the horizontal top deflection based on a simplified outrigger model. The deformation compatibility conditions between outriggers and core wall as well as the finite rigidities of outriggers are also considered. One case study was carried out to analyze the horizontal top deflection and the mutation of the restraining moments caused by the variation of outrigger location. The results showed that the method adopted in the paper is simple and reasonable. Some conclusions are valuable to the safety design of high-rise building structures.

Structural Design of a Tall Building with Underpinning Structure in Guangzhou

This paper introduces the structural design optimization of a tall building with reinforced concrete frame-core shear walls in Guangzhou downtown.To decrease the construction cost,wide flat beam with 400 mm ×650 mm rectangular cross-section are adopted for main beam.Special measures are used to decrease noncoincident centers of mass and stiffness.Because subway tunnels cross the building underground,inclined columns,the second and third floor underground together function as the underpinning structures.Different from traditional transform beam,the proposed underpinning structures show good performance without using large dimensional bending members.Special attentions should be paid to the beams connecting with the inclined column in the underpinning structures,and these beams show large tensile or compressive forces.Settlement observations after completion construction indicate that the building as well as the proposed design measures work well.

Evaluation of a Novel Approach for Automated Inventive Conceptual Design of Building Structures

This research is dedicated to assessment of a method that was earlier proposed and developed in order to increase the degree of automation and software involvement into conceptual decision making during design of structural elements of buildings. Such instruments of the theory of inventive problem solving as contradiction and function analysis and trimming formed the basis of the proposed approach that was realized in a modern building information modeling software. The common logic of the approach is also provided in the article. Qualitative research methods and particularly collecting, analyzing and interpreting data were applied in this research. Firstly, a literature review of indexed journal articles in the field of the study was performed and some trends for possible development of the topic were identified. Secondly, a survey of potential users of the methodology was conducted and analyzed. The questionnaire results showed that the suggested method and its technical realization gained attraction among respondents, however, some of them are rather cautious regarding application of the approach potentials in their practice. The paper ends with evaluation results discussion, conclusion and proposals for further research.

Studies on Seismic Identification and Reinforcement Design of Building Structures

China is a country with many earthquakes. Seismic safety monitoring and building earthquake-proofing technique are important means to protect the safety of people’s property in China. However, up to now, China’s seismic reinforcement and identification technology is still not mature enough. In particular, the 2008 Wenchuan earthquake caused great loss of life and safety to the Chinese people. This paper, takes seismic identification and reinforcement technology of building structures as the research object and summarizes the main methods of building structure seismic resistance in China. This paper is based on an in-depth analysis of the main seismic reinforcement and identification techniques in China, deeply analyzes the crux of anti-seismic and reinforcement of building structure combining with the current building seismic reinforcement typical cases, and puts forward some reasonable suggestions and improvement methods for the future development of building seismic identification and reinforcement design.

The Design and Implementation of High-rise Building Construction Based on GPS Positioning Technology

Baseline observation as well as height measurement is the important content of the quality control of high-rise building construction.In order to strengthen the quality of construction projects,meet the requirement of completion time,improve the accuracy and efficiency of locating observation and explore a scientific way of observation suitable for high-rise building construction,this paper studies the design and implementation of high-rise building construction based on GPS positioning technology.

Application Strategies of Modular Design in Assembled Teaching Buildings

As an efficient,environmentally friendly,energy-saving construction method,assembled buildings are now widely used in campus building construction.Modular design thinking is system-based design thinking,and its application to the design of an assembled teaching building project will comprehensively improve the rationality of the teaching building and component design.The paper focuses on the application of modular design thinking in assembled teaching building design,aiming to provide references for China’s architectural design units,giving full play to the advantages of modular design thinking in future teaching building design projects,and enhancing the level of design,for the construction of the teaching building and the basis of the technical guarantee.

Low Carbon Building Design Optimization Based on Intelligent Energy Management System

The construction of relevant standards for building carbon emission assessment in China has just started,and the quantitative analysis method and evaluation system are still imperfect,which hinders the development of low-carbon building design.Therefore,the use of intelligent energy management system is very necessary.The purpose of this paper is to explore the design optimization of low-carbon buildings based on intelligent energy management systems.Based on the proposed quantitative method of building carbon emission,this paper establishes the quota theoretical system of building carbon emission analysis,and develops the quota based carbon emission calculation software.Smart energy management system is a low-carbon energy-saving system based on the reference of large-scale building energy-saving system and combined with energy consumption.It provides a fast and effective calculation tool for the quantitative evaluation of carbon emission of construction projects,so as to realize the carbon emission control and optimization in the early stage of architectural design and construction.On this basis,the evaluation,analysis and calculation method of building structure based on carbon reduction target is proposed,combined with the carbon emission quota management standard proposed in this paper.Taking small high-rise residential buildings as an example,this paper compares and analyzes different building structural systems from the perspectives of structural performance,economy and carbon emission level.It provides a reference for the design and evaluation of low-carbon building structures.The smart energy management system collects user energy use parameters.It uses time period and time sequence to obtain a large amount of data for analysis and integration,which provides users with intuitive energy consumption data.Compared with the traditional architectural design method,the industrialized construction method can save 589.22 megajoules(MJ)per square meter.Based on 29270 megajoules(MJ)per ton of standard coal,the construction area of the case is about 8000 m2,and the energy saving of residential buildings is 161.04 tons of standard coal.This research is of great significance in reducing the carbon emission intensity of buildings.

Multi-hazard performance assessment of a transfer-plate high-rise building

Many urban areas are located in regions of moderate seismicity and are subjected to strong wind. Buildings in these regions are often designed without seismic provisions. As a result, in the event of an earthquake, the potential for damage and loss of lives may not be known. In this paper, the performance of a typical high-rise building with a thick transfer plate （TP）, which is one type of building structure commonly found in Hong Kong, is assessed against both earthquake and wind hazards. Seismic- and wind-resistant performance objectives are first reviewed based on relevant codes and design guidelines for high-rise buildings. After a brief introduction of wind-resistant design of the building, various methodologies, including equivalent static load analysis （ESLA）, response spectrum analysis （RSA）, pushover analysis （POA）, linear and nonlinear time-history analysis （LTHA and NTHA）, are employed to assess the seismic performance of the building when subjected to frequent earthquakes, design based earthquakes and maximum credible earthquakes. The effects of design wind and seismic action with a common 50-year return period are also compared. The results indicate that most performance objectives can be satisfied by the building, but there are some objectives, such as inter-story drift ratio, that cannot be achieved when subjected to the frequent earthquakes. It is concluded that in addition to wind, seismic action may need to be explicitly considered in the design of buildings in regions of moderate seismicity.

Structural form selection of the high-rise buildingwith the improved BP neural network

As civil engineering technology development,the structural form selection is more and more critical in design of high-rise buildings.However,structural form selection involves expertise knowledge and changes with the environment which makes the task arduous.An approach utilizing improved back propagation(BP)neural network optimized by the Levenberg-Marquardt(L-M)algorithm is proposed to extract the main controlling factors of structural form selection.Then,an intelligent expert system with artificial neural network is constructed to design high-rise buildings structure effectively.The experiment tests the model in 15 well-known architecture samples and get the prediction accuracy of 93.33%.The results show that the method is feasible and can help designers select the appropriate structural form.

Optimum structural design of full-scale steel buildings using drift-tribe-charged system search

In this paper,the potential of utilizing improved metaheuristic approaches in optimal design of building structures is concerned.In this regard,the drift-tribe-charged system search algorithm is proposed that the position and velocity updating processes of the charged system search is developed by implementing the mathematical presentation of the free-electron model utilized for metal conductors.In addition,the searching phase of the developed algorithm is also divided into three separate phases in order to improve the convergence capability of the algorithm.By means of these modifications,the exploitation and exploration rates of the standard algorithm are enhanced.In order to determine the ability of the proposed improved metaheuristic method considering some complex optimization problems,a 10-story steel building structure with 1026 structural members alongside a 60-story structure with 8272 members are utilized as numerical examples.The overall capability of the developed metaheuristic approach is compared with other metaheuristics.A total number of 30 independent runs have been conducted for each of the standard and proposed methods while a statistical analysis is also conducted for comparative purposes.The obtained optimum results demonstrated that the proposed metaheuristic approach is capable of preparing better outcomes than other metaheuristics.

Uniform-risk-targeted seismic design for collapse safety of building structures

Seismic design should quantitatively evaluate and control the risk of earthquake-induced collapse that a building structure may experience during its design service life. This requires taking into consideration both the collapse resistant capacity of the building and the earthquake ground motion demand. The fundamental concept of uniform-risk-targeted seismic design and its relevant assessment process are presented in this paper. The risks of earthquake-induced collapse for buildings located in three seismic regions with the same prescribed seismic fortification intensity but different actual seismic hazards are analyzed to il- lustrate the engineering significance of uniform-risk-targeted seismic design. The results show that with China＇s current seis- mic design method, the risk of earthquake-induced collapse of buildings varies greatly from site to site. Additional research is needed to further develop and implement the uniform-risk-targeted seismic design aoDroach oronnsed in thi~ nnner

A Hyper-redundant Elephant’s Trunk Robot with an Open Structure:Design,Kinematics,Control and Prototype

As for the complex operational tasks in the unstructured environment with narrow workspace and numerous obstacles,the traditional robots cannot accomplish these mentioned complex operational tasks and meet the dexterity demands.The hyper-redundant bionic robots can complete complex tasks in the unstructured environments by simulating the motion characteristics of the elephant’s trunk and octopus tentacles.Compared with traditional robots,the hyper-redundant bionic robots can accomplish complex tasks because of their flexible structure.A hyper-redundant elephant’s trunk robot(HRETR)with an open structure is developed in this paper.The content includes mechanical structure design,kinematic analysis,virtual prototype simulation,control system design,and prototype building.This design is inspired by the flexible motion of an elephant’s trunk,which is expansible and is composed of six unit modules,namely,3UPS-PS parallel in series.First,the mechanical design of the HRETR is completed according to the motion characteristics of an elephant’s trunk and based on the principle of mechanical bionic design.After that,the backbone mode method is used to establish the kinematic model of the robot.The simulation software SolidWorks and ADAMS are combined to analyze the kinematic characteristics when the trajectory of the end moving platform of the robot is assigned.With the help of ANSYS,the static stiffness of each component and the whole robot is analyzed.On this basis,the materials of the weak parts of the mechanical structure and the hardware are selected reasonably.Next,the extensible structures of software and hardware control system are constructed according to the modular and hierarchical design criteria.Finally,the prototype is built and its performance is tested.The proposed research provides a method for the design and development for the hyper-redundant bionic robot.

Flexible high-rise apartments with sparse wall-frame structure:A data-driven computational approach

Flexible housing resolves the fundamental conflicts between the long-standing structure and the evolving demands.We propose a computational method of optimizing the structural layout of high-rise residential buildings.Chinese high-rise apartment buildings have widely employed shear wall-frame structure in which one big room or multiple small rooms could occupy the same span.Fitting multiple floor plans into a fixed sparse scheme of shear walls and columns is feasible.We developed a computational framework to seek flexible structural schemes.A building scheme consists of a circulation core,shear walls,columns,and boundaries.The computer program automatically adapts floor plans to any drawn or generated scheme.Based on a large dataset of apartment layouts,the number of apartments that fit into a building scheme statistically reflects the flexibility of the scheme.If many hypothetical plans can fit into a wallframe structure in computer simulation,this structure could probably support several generations of unknown plans.Such a data-driven computational method provides the possibility of creating a one-to-many mapping between permanent structure and evolving apartment plans.

Seismic design and analysis of a high-rise self-centering wallbuilding:Case study

Post-tensioning self-centering walls are a well-developed and resilient technology.However,despite extensive research,the application of this technology has previously been limited to low-rise buildings.A ten-story selfcentering wall building has now been designed and constructed using the state-of-art design methodologies and construction detailing,as described in this paper.The building is designed in accordance with direct displacement-based design methodology,with modification of seismic demand due to relevant issues including higher-mode effects,second order effects,torsional effects,and flexural deformation of wall panels.Wall sections are designed with external energydissipating devices of steel dampers,and seismic performance of such designed self-centering walls is evaluated through numerical simulation.It is the first engineering project that uses self-centering walls in a high-rise building.The seismic design procedure of such a high-rise building,using self-centering wall structures,is comprehensively reviewed in this work,and additional proposals are put forward.Description of construction detailing,including slotted beams,flexible wall-to-floor connections,embedded beams,and damper installation,is provided.The demonstration project promotes the concept of seismic resilient structures and contributes to the most appealing city planning strategy of resilient cities at present.The paper could be a reference for industry engineers to promote the self-centering wall systems worldwide.

Undergraduate Design and Analysis of a LEED Certified Building

In this technical and educational research endeavor, a diverse group of civil engineering students took on the role of creating the means and methods of producing a successful building design. Architectural, structural, and environmental designs were primarily performed. This was followed by detailed cost analysis with the intent of providing a realistic cost comparison by pricing the intended building, using traditional material and typical building methods, versus pricing the building using recycled material and new present-day technology. Some green features needed to achieve a LEED (Leadership in Energy and Environmental Design) gold certification were considered and applied. It is shown that producing a green building is more costly in present circumstances;however, the additional cost due to greenification pays itself off throughout the years giving in return saving features. Even though the design of a green building comes with detailed planning and costly material, it does generate benefits for the building owner, the society, and most importantly the environment.