Investigation of ZSM-5/MCM-41 Composite Molecular Sieve for Reducing Olefin Content of FCC Gasoline

ZSM-5/MCM-41 composite molecular sieve was prepared by the nano-assembling method.The ZSM-5 molecular sieve,the MCM-41 molecular sieve,the ZSM-5/MCM-41 mechanical mixture and the ZSM-5/MCM-41 composite molecular sieve were characterized by X-ray powder diffractometry,N_2 adsorption isotherms,temperature programmed desorption of ammonia and scanning electron microscopy and their properties were analyzed.Using FCC gasoline as the feed,activities of different molecular sieves for reducing olefin content were investigated in a continuous high-pressure micro-reactor unit under the following conditions:a reaction temperature of 400℃,a reaction time of 2 h,a weight hourly space velocity of 3h^(-1),and a reaction pressure of 2.0 MPa.The results showed that the HMCM-41 molecular sieve had low reaction performance,and the HZSM-5 molecular sieve demonstrated high aromatization activity,while the ZSM-5/MCM- 41 composite molecular sieve exhibited a best olefin-reducing performance because of its high isomerization activity and moderate aromatization activity.With a largest olefin-reducmg capability and a reasonable distribution of products,the composite molecular sieve was more suitable for FCC gasoline upgrading compared to other three catalysts.

Removal of Thiophene from Benzene from Coal Source by Liquid Adsorption on Modified ZSM-5 Synthetic Zeolite

The use of a modified ZSM-5 molecular sieve to remove thiophene from benzene was demonstrated. Adsorption equilibrium experiments were carried out in an enclosed vessel in which a known amount of zeolite was contacted with 20-40 ml of benzene-thiophene solution. The solutions were analyzed by gas chromatography with flame photometric detector. Thiophene was not physically adsorbed on a single molecular layer but mainly adsorbed chemically onto the modified ZSM-5 zeolite adsorbent.

Synthesis and Characterization of Ordered Mesoporous Aluminosilicate Molecular Sieves with High Stability in High-Temperature Steam

The ordered mesoporous aluminosilicate molecular sieve （MASMS-1） stable in the high-temperature steam has been successfully synthesized from the assembly of diluted ZSM-5-type precursor with mesoporous MCM-41. The material was characterized by XRD, N2 adsorption-desorption, FE-SEM, TEM, FT-IR spectroscopy and 27A1 MAS NMR techniques. This mesoporous material shows high stability in the high-temperature steam [H2O （φ=20%） in N2 at 800 ℃ for 4 h], which might be ascribed to the synergistic effect of both thick walls containing zeolite-like five-membered ring subunits and highly condensed surface silanol groups.

Active oxygen species and oxidation mechanism over Ce-doped LaMn_(0.8)Ni_(0.2)O_(3)/hierarchical ZSM-5 in pentanal oxidation

Hierarchical ZSM-5(HZ)molecular sieves based on fly ash were synthesized using a method combining water heat treatment with step-by-step calcination.The coupling catalysts between La_(1-x)Ce_(x)Mn_(0.8)-Ni_(0.2)O_(3)(x≤0.5)perovskites and HZ were prepared through the impregnation method,which were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),high-resolution transmission electron microscopy(HRTEM),N_(2)adsorption,X-ray photoelectron spectroscopy(XPS),NH3-temperature programmed desoprtion(NH3-TPD),H_(2)-temperature programmed reduction(H_(2)-TPR)and O_(2)-TPD techniques and investigated regarding pentanal oxidation at 120-390℃to explore the effects of Ce doping on the catalytic activity and the active oxygen species of the coupling catalysts,meanwhile,the reaction mechanism and pathway of pentanal oxidation were also studied.The results reveal that Ce substitution at La sites can change the electronic interactions between all the elements and promote the electronic transfer among La,Ce,Ni,Mn and HZ,influencing directly the physicochemical characteristics of the catalysts.Moreover,the amount and transfer ability of surface adsorbed oxygen(O_(2)-and O-)regarded as the reactive oxygen species and the low temperature reducibility are the main influence factors in pentanal oxidation.Additionally,La_(0.8)Ce_(0.2)Mn_(0.8)Ni_(0.2)O_(3)/HZ exhibits the best catalytic activity and deep oxidation capacity as well as a better water resistance due to its larger amount of surface adsorbed oxygen species and higher low temperature reducibility.What’s more,appropriate Ce substitution can significantly enhance the amount of O_(2)-ions,which can distinctly enhance the catalytic activity of the catalyst,and moderate acid strength and appropriate acid amount can also facilitate the improvement of the pentanal oxidation activity.It is found that there is a synergic catalytic effect between surface acidity and redox ability of the catalyst.According to the in situ DRIFTS and GC/MS analyses,pentanal can be oxidized gradually to CO_(2)and H_(2)O by the surface oxygen species with the form of adsorption in air following the Langmuir-Hinshelwood(L-H)reaction mechanism.Two reaction pathways for the pentanal oxidation process are proposed,and the conversion of the formates to carbonates may be one of the main rate-determining steps.