Integration of bio-inspired limb-like structure damping into motor suspension of high-speed trains to enhance bogie hunting stability

Hunting stability is an important performance criterion in railway vehicles.This study proposes an incorporation of a bio-inspired limb-like structure(LLS)-based nonlinear damping into the motor suspension system for traction units to improve the nonlinear critical speed and hunting stability of high-speed trains(HSTs).Initially,a vibration transmission analysis is conducted on a HST vehicle and a metro vehicle that suffered from hunting motion to explore the effect of different motor suspension systems from on-track tests.Subsequently,a simplified lateral dynamics model of an HST bogie is established to investigate the influence of the motor suspension on the bogie hunting behavior.The bifurcation analysis is applied to optimize the motor suspension parameters for high critical speed.Then,the nonlinear damping of the bio-inspired LLS,which has a positive correlation with the relative displacement,can further improve the modal damping of hunting motion and nonlinear critical speed compared with the linear motor suspension system.Furthermore,a comprehensive numerical model of a high-speed train,considering all nonlinearities,is established to investigate the influence of different types of motor suspension.The simulation results are well consistent with the theoretical analysis.The benefits of employing nonlinear damping of the bio-inspired LLS into the motor suspension of HSTs to enhance bogie hunting stability are thoroughly validated.

Influence of dynamic unbalance of wheelsets on the dynamic performance of high-speed cars

With further increasing in running speed of newer high-speed EMUs（electric multiple units）,higher demand for wheelset dynamic balance is required.In order to study the influence of the dynamic unbalance of wheelset on the stability,ride quality,and curving performance for a high-speed car,a detailed dynamic model of a high-speed EMU car is established using the software SIMPACK.The analysis results indicate that the dynamic unbalance of the wheelset significantly influences the dynamic performance of the high-speed car.The increase in dynamic unbalance of the wheelset will decrease the hunting critical speed,worsen the vertical ride quality,and increase the wheelset lateral force,derailment coefficient,and wheel unloading ratio.Therefore,in order to improve the stability,ride quality,and running safety of high-speed car,the values of dynamic unbalance of wheelset should be strictly controlled in manufacturing,and periodically monitored in operation.

Temperature prediction model for a high-speed motorized spindle based on back-propagation neural network optimized by adaptive particle swarm optimization

To predict the temperature of a motorized spindle more accurately,a novel temperature prediction model based on the back-propagation neural network optimized by adaptive particle swarm optimization(APSO-BPNN)is proposed.First,on the basis of the PSO-BPNN algorithm,the adaptive inertia weight is introduced to make the weight change with the fitness of the particle,the adaptive learning factor is used to obtain different search abilities in the early and later stages of the algorithm,the mutation operator is incorporated to increase the diversity of the population and avoid premature convergence,and the APSO-BPNN model is constructed.Then,the temperature of different measurement points of the motorized spindle is forecasted by the BPNN,PSO-BPNN,and APSO-BPNN models.The experimental results demonstrate that the APSO-BPNN model has a significant advantage over the other two methods regarding prediction precision and robustness.The presented algorithm can provide a theoretical basis for intelligently controlling temperature and developing an early warning system for high-speed motorized spindles and machine tools.

Electromagnetic Analysis and Optimization of High-speed Maglev Linear Synchronous Motor Based on Field-circuit Coupling

High speed maglev train has become a new non-contact transportation mode mainly studied in recent years because of its non-sticking and high speed characteristics.Firstly,the finite element model of the long stator linear synchronous motor(LSM)is established based on the structure of the test prototype.After calculation,it is compared with the experimental data and verified.On this basis,a field-circuit coupling model based on inverter circuit is established,and the influence of carrier wave ratio change on the output characteristics of LSM is calculated and analyzed.Finally,the filter circuit is introduced into the field-circuit coupling model,and the influence of the filter circuit on the output characteristics of the LSM is compared and analyzed.

Optimization Design of High-speed Interior Permanent Magnet Motor with High Torque Performance Based on Multiple Surrogate Models

In order to obtain better torque performance of high-speed interior permanent magnet motor(HSIPMM) and solve the problem that electromagnetic optimization design is seriously limited by its mechanical strength, a complete optimization design method is proposed in this paper. The object of optimization design is a 15 kW、20000 r/min HSIPMM whose permanent magnets in rotor is segmented. Eight structural dimensions are selected as its optimization variables. After design of experiment(DOE), multiple surrogate models are fitted, a set of surrogate models with minimum error is selected by using error evaluation indexes to optimize, the NSGA-II algorithm is used to get the optimal solution. The optimal solution is verified by load test on a 15 kW, 20000 r/min HSIPMM prototype. This paper can be used as a reference for the optimization design of HSIPMM.

Research Progress of Key Technology of High-Speed and High Precision Motorized Spindles

High speed machining and high precision machining are two tendencies of themanufacturing technology worldwide. The motorized spindle is the core component of the machine toolsfor achieving the high speed and high precise machining, which affects the general developmentlevel of the machine tools to a great extent. Progress of the key techniques is reviewed in thispaper, in which the high speed and high precision spindle bearings, the dynamical and thermalcharacteristics of spindles, the design technique of the high frequency motors and the drivers, theanti-electromagnetic damage technique of the motors, and the machining and assembling technique areinvolved. Finally, tha development tendencies of the motorized spindles are presented.

Analysis of Temperature Rise in High-Speed Permanent Magnet Synchronous Traction Motors by Coupling the Equivalent Thermal Circuit Method and Computational Fluid Dynamics

To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.

The Slot Number and Air-Gap Effect on Performance of the High-Speed Brushless Permanent Magnet Motor

This paper describes the key issues of high-speed brushless permanent magnet motor design, such as rotor design, stator design, and determination of the main dimensions, and the overall design process was given. In this paper, a two-pole three-phase high-speed brushless PM （permanent magnet） motor with ratings air-gap length and stator slot number on the motor performance of 7.5 kW, 30,000 rpm is designed, and the effect of the different was analyzed. The results show that larger number of stator slot decreases the rotor loss and the rotor torque ripple. Larger air-gap length decreases the rotor loss.

Design of High-Speed PM Synchronous Motor Thermal and Mechanical Analyzes Study for Aerospace Retraction Wheel Motor Application

A 3-D modeling of FEA （finite element analysis） design provides for high-speed synchronous with PMs （permanent magnets） applied in aerospace application will be examined under design considerations ofn = 12,000 rpm, short-duty operation, and etc. for an ARWM （aerospace retraction wheel motor）. First, lumped-elements will be fine-tuned following numerical method results is reported steady-state and transient solutions. Besides, the equations of thermal modeling such as Re, N,,, G,. and Pr numbers in order to calculate heat-transfer coefficient of convection on the rotor and stator surfaces in the air-gap have calculated. This section illustrates the temperature distribution of each point in a clear view. By CFD （fluid dynamic analysis） analysis, the fluid dynamics were modeled, pressure and velocity streamlines of cooling-flow have analyzed. An optimization algorithm was derived in order to have optimized number of water-channels as well. Second, calculation of nodal and tangential forces which deal with mechanical stresses of the ARWM have represented. The paper discusses an accurate magnetic-field analysis that addresses equivalent stress distribution in the magnetic core through using the transient FEA to estimate motor characteristics. The whole model shear and normal mechanical stresses and total deformation oftbe ARWM has been investigated by transient FEA. The end-winding effects were included by the authors.

Wheel wear comparison between motor car and trailer of intercity train

To analyze wheel wear discrepancy between motor car and trailer of an intercity train,a novel wheel wear rates calculation model was proposed,which was composed of the intercity train dynamics model,wheel-rail three-dimensional rolling contact FEM model and the wear model.The simulated results were contrasted with measured results in field test.The simulated results showed the motor car wheels had larger rotation rate and longitudinal creepage than the trailer wheels.Meanwhile,the motor car wheels encountered larger vertical forces and longitudinal forces from bogie because of the heavier car body and the impact of traction torque.The traction torque acting on motor car wheel could increase the slip rates in the rear part of wheel contact patch and weaken the spinning phenomenon of relative slip.Larger contact pressure and slip rates caused the higher wear rates of motor car wheel than those of trailer wheel.The overall trends of wheel wear depth in simulated and tested results were similar.And they both showed the motor car wheel encountered the more serious wear than the trailer wheel.These models can be used to study the effect of the traction characteristics curves on the wear of wheel.

Synthetic Performance Simulation of E-Car HS2000

The simulation model of the E car HS2000 including the permanent magnetic direct current motor with the augment magnet winding is constructed based on tests in order to simulate the synthetic performance of the electric car. The performance of E car HS2000 is analyzed by means of modeling and programming according to data acquired during tests. The simulation results show that the performance of E car HS2000 is successfully predicted and the model and the corresponding simulation software are feasible for simulating E cars. They can be used as effective tools for analyzing the performance parameters as well as specifications of E cars during prototype stage.

相关变换及其在车窗纹波周期估计中的应用

本文针对车窗电机纹波周期估计提出一种新方法——相关变换法。经过相关变换后的输出信号与输入信号具有相同周期,且相关变换后输出信号的基波与各次谐波初始相位均为0,这使得在相关变换后输出信号的基波上峰点及邻域范围内,因谐波的同相叠加,基波的上峰锐度和信噪比得到显著增强。在相关变换输出域进行信号周期估计时,其准确性和可靠度能够大幅提升。文章对相关变换的优良特性进行理论证明、仿真验证以及实例验证,结果准确无误。

Losses Calculation of an Aerospace Retraction Wheel Motor with Regarding to Electromagnetic-Field Analysis Investigation

A 3-D FEA （finite element analysis） transient and steady-state design proposal for high-speed with Nd-Fe-Br （reversible） magnets in aerospace application will be examined under design considerations of n = 12,000 rpm, short-duty, sinusoidal drive, low cogging, high efficiency at peak torque, and etc. for an ARWM （aerospace retraction wheel motor）. In construction, the PMs （permanent magnets） fixed on the rotor core which is surface-mOunted magnets retained by a carbon-fiber bandage. Redundant windings, resistant to fault propagation have accounted. Besides, an axial water-jacket housing without end-cap cooling has involved. All performed characteristic performances of the correlated ARWM will verify by comparison through 2-D and 3-D FEA results. In this paper, design process has dealing with determination of various kinds of losses such as electromagnetic and mechanical losses. In terms of both classified losses, copper, stator back iron, stator tooth, PM, rotor back iron, air-friction and sleeve losses were calculated. The 3-D end-winding effects were included in the modeled ARWM by the authors.

CFD Study of Forced Air Cooling and Windage Losses in a High Speed Electric Motor

High speed and high efficiency synchronized electric motors are favored in the automotive industry and turbo machinery industry worldwide because of the demands placed on efficiency. Herein an electric motor thermal control system using cooling air which enters from the drive end of the motor and exits from the non-drive end of the motor as the rotor experiences dissipates heat is addressed using CFD. Analyses using CFD can help to find the appropriate mass flow rate and windage losses while satisfying temperature requirements on the motor. Here, the air flow through a small annular gap is fed at 620 L/min (0.011 kg/sec) as the rotor spins at 100,000 rpm (10,472 rad/sec) and the rotor dissipates 200 W. The CFD results are compared with experimental results. Based upon the CFD findings, a novel heat transfer correlation suitable for large axial Reynolds number, large Taylor number, small annular gap Taylor-Couette flows subject to axial cross-flow is proposed herein.

Technological Analysis on Motor Stall and Its Perspective

The brush lock is due to assembly tightly during assembling three gripper so that it curls after some time in motor and bare motors.The motor happen to have current decreasing and cause rotary too slowly is an important technique problem.At last the motor hasn’t worked due to disconnection.It give company to bring assembly issue for customers.So the motor stall is main issue in motor working.We shall pay more attention to it necessarily and shall be strict quality inspection and we shall monitor the flow line for the sake of decreasing it.We shall solve the problem as soon as possible and communicate with the customer engineers.Unloaded rotation is radical in the base inspection.The engineer need to negotiate with supplying engineers for the qualified material of brush.Increasing inspection into more times is a method to decrease unqualified brushes.Some experiment method is explained to analyze for customer engineers.Two kinds of motors ie.stepping and asynchronous motor and motors used in future in car is explained to further knowledge to motor’s application.Such as the experiment with torque,voice and electric voltage converter.The pseudo soldering results the slow rotary.The reverse voltage is a reason for a motor to slow rotary even stall.

小型全电/混动飞机技术路线与动力系统综述

该文对小型全电/混动载人飞机的技术发展路线、航空推进电机、动力系统架构进行分析、总结与展望。首先,从载人飞机的气动布局、结构拓扑、动力源和起降形式等方面分析,分出6条技术路线,总结各自的乘客数、最大起飞重量、巡航速度、功率和航程等技术指标。其次,总结已装机或拟装机航空推进电机的技术参数和应用机型。对先进航空推进电机的发展现状,按功率等级分类探讨了三相永磁电机、多相永磁电机、兆瓦级涡轮机驱动的兆瓦级电机/发电机、高温超导电机。最后,对6种动力系统架构的技术路线特点、关键技术进行梳理,分析载人全电/混动飞机未来的发展方向。国内载人电动/混动飞机领域刚起步,该文的研究工作对飞机的总体气动布局设计、功率需求、器件选型、动力系统设计具有重要的参考价值。

A sensorless efficiency test system for a high-speed permanent magnet synchronous motor

We present a sensorless efficiency test system with energy recovery for a high-speed permanent magnet synchronous motor(PMSM). In the system, two identical high-speed PMSMs are used as the motor under test(MUT)and the load machine(LM),respectively.A new sensorless vector control(VC) method based on a hypothetical reference frame is presented to control both the MUT and the LM.Also,a regenerating unit is used to implement energy circulation to save energy.Experiments were carried out on a prototype, with a digital controller based on the TMS320 F28335, to verify the adequacy of the sensorless VC method.As a result,the efficiency test system achieves the load test at the speed of 21000 r/min without any reduction equipment. During the test, the energy regenerated by the LM could be fed back to the MUT by the regenerating unit, and 81.31% electrical power was saved.In addition, with the proposed sensorless VC method,both the MUT and the LM can work at i_d = 0 without a position sensor.

Analytical modeling and simulation on lateral mechanical characteristics of high-speed train traction motor hanging leaf spring

In this paper,using the theoretical analysis method,according to the actual structure of the hanging leaf spring of the traction motor mounted on the frame,the lateral force model of the hanging leaf spring of the traction motor was established.Then,through theoretical deduction,the deformation analytical calculation formula and the stress analytical calculation formula of the hanging leaf spring were established.The correctness of the leaf spring’s lateral force model was established and its deformation and stress analytical formulae were verified using ANSYS finite element analysis software.Based on this,according to the deformation analytical formula and the stress analytical formula of the leaf spring established,the influence of the main structural parameters on the mechanical characteristics of the leaf spring was discussed,and the reliability of the analytical analysis method of the lateral mechanical characteristics of the traction motor hanging leaf spring was verified by the loading–unloading test.The results show that the deformation and the load of the leaf spring change linearly.The changes of leaf spring’s stress at different positions can be considered as being composed of three sections:a linear change section in the root,a nonlinear change section in the middle,and a nonlinear change section in the end.In the structural parameters,the end thickness h2 has the greatest influence on the stiffness and the stress of the leaf spring,and the maximum thickness of the leaf spring eye h1 has the least influence on the stiffness and the stress of the leaf spring.The influence degree of other parameters on the stiffness of the leaf spring is h_(3),L_(1),L_(3),L_(2) in order,and the influence degree on the stress of the leaf spring is h_(3),L_(1),L_(2),L_(3) in order.In addition,when the root thickness h_(3) is greater than a certain value,the maximum stress point of the leaf spring appears at the end position L_(2).This study can provide a useful reference for the intelligent forward design and the rapid analysis of the mechanical characteristics of high-speed train traction motor hanging leaf spring.

太阳能多功能智能充电车衣的设计

针对传统的需要人力手动覆盖的汽车车衣,设计并开发了一款基于STC89C52单片机的太阳能多功能智能充电车衣,该车衣既可以通过外界温度、湿度以及光照强度的变化进行收起或者打开车衣,也可以通过手机蓝牙APP实现对车衣的控制。智能车衣不仅解决了需要人力而且费时的缺点,还解决了由于车内温度过高而引起有害物质挥发的问题。该产品可以广泛应用于停在室外的小型车、紧凑车、SUV等型号汽车。