A new mobile communications network architecture is proposed to solve four existing bottlenecks that restrict the rapid development of mobile communications,as well as to meet the development demands of future broadba...A new mobile communications network architecture is proposed to solve four existing bottlenecks that restrict the rapid development of mobile communications,as well as to meet the development demands of future broadband mobile communications. The architecture introduces the Information Lamp (IL),a novel device carrying out transceiver function,as the access point,besides providing light. It fulfills information interaction between the access points and radio access network through the power line (or fiber). The new system,supported by core technologies such as multi-antenna based distributed space-time signal processing and distributed radio resource management,integrates the wired and wireless networks to provide high-speed and high-quality mobile communication services.展开更多
When solving the routing problem with traditional ant colony algorithm, there is scarce in initialize pheromone and a slow convergence and stagnation for the complex network topology and the time-varying characteristi...When solving the routing problem with traditional ant colony algorithm, there is scarce in initialize pheromone and a slow convergence and stagnation for the complex network topology and the time-varying characteristics of channel in power line carrier communication of low voltage distribution grid. The algorithm is easy to fall into premature and local optimization. Proposed an automatic network algorithm based on improved transmission delay and the load factor as the evaluation factors. With the requirements of QoS, a logical topology of power line communication network is established. By the experiment of MATLAB simulation, verify that the improved Dynamic hybrid ant colony genetic algorithm (DH_ACGA) algorithm has improved the communication performance, which solved the QoS routing problems of power communication to some extent.展开更多
Traditional resource allocation algorithms use the hierarchical system, which does not apply to the bad channel environment in broadband power line communication system. Introducing the idea of cross-layer can improve...Traditional resource allocation algorithms use the hierarchical system, which does not apply to the bad channel environment in broadband power line communication system. Introducing the idea of cross-layer can improve the utilization of resources and ensure the QoS of services. This paper proposes a cross-layer resource allocation on broadband power line based on QoS priority scheduling function on MAC layer. Firstly, the algorithm considers both of real-time users’ requirements for delay and non-real-time users’ requirements for queue length. And then user priority function is proposed. Then each user’s scheduled packets number is calculated according to its priority function. The scheduling sequences are based on the utility function. In physical layer, according to the scheduled packets, the algorithm allocates physical resources for packets. The simulation results show that the proposed algorithm give consideration to both latency and throughput of the system with improving users’ QoS.展开更多
High-speed broadband power line communication(BPL)is a novel and practicable technique for NetatHome or home area local area networking(LAN).Because of the characteristics of BPL,the electromagnetic wave emitted from ...High-speed broadband power line communication(BPL)is a novel and practicable technique for NetatHome or home area local area networking(LAN).Because of the characteristics of BPL,the electromagnetic wave emitted from the BPL transmission media will influence the indoor electromagnetic environment,which would also affect the performance of other wireless communications.Based on the analysis of the communication channel characteristic,network impedance and attenuation characteristic of the BPL,this paper proposes a novel model for calculating the BPL radiation and the computer simulation model,which are proved by the coherence of the simulation and the test data.The interferences from the high-speed BPL to indoor wireless communications are analyzed to stipulate the standards of high-speed BPL in the future.展开更多
A hybrid model for broadband multiple-input multiple-output(MIMO) relay-aided indoor power line communications(PLC) system was proposed in this paper. The proposed model combines the top-down and bottom-up approaches ...A hybrid model for broadband multiple-input multiple-output(MIMO) relay-aided indoor power line communications(PLC) system was proposed in this paper. The proposed model combines the top-down and bottom-up approaches and extends to a two-hop relay-aided cooperative system with variable gain relay in amplify-and-forward(AF) mode. Based on the proposed PLC model and generated channel, the channel statistical characteristics are further investigated in 2 MHz^100 MHz bandwidth. Simulated results show that the proposed model overcomes the difficulties that the existing models need a lot of topological information of the network or measurements information. It provides a practical simulation analysis method for cooperative relay MIMO-PLC system. The results also show that cooperative MIMO relaying communications can improve the indoor PLC performances and communication reliability.展开更多
在Q/GDW 1379.4-2013通信单元检验技术规范的要求下,为测试低压宽带电力线载波通信单元的工作频段、载波信号发射功率谱密度、抗衰减能力、抗噪声干扰和抗阻抗变化等基本通信性能,给电网公司建设宽带电力载波远程集抄系统提供数据参考...在Q/GDW 1379.4-2013通信单元检验技术规范的要求下,为测试低压宽带电力线载波通信单元的工作频段、载波信号发射功率谱密度、抗衰减能力、抗噪声干扰和抗阻抗变化等基本通信性能,给电网公司建设宽带电力载波远程集抄系统提供数据参考和方案依据。根据宽带电力线载波技术的特点搭建了点对点通信性能测试平台。该平台采用三级级联双SMA电源滤波组合,可有效隔离电网谐波、脉冲信号及电力线背景噪声对宽带载波通信单元性能的影响,使测试平台能够充分模拟低压电力线通道,还原现场集抄台区的运行状况,评估载波通信单元的实际可用性。试验数据证明:所建点对点通信性能测试平台试验环境纯净,对2MHz^30MHz通带内的信号衰减达93 d B,可确保宽带载波通信产品测试结果的稳定可靠。展开更多
基金the National Natural Science Foundation of China under Grants 60572090, 60472045 and 60496313, Ph.D Programs Foundation of Ministry of Education of China under Grant 20050614009.
文摘A new mobile communications network architecture is proposed to solve four existing bottlenecks that restrict the rapid development of mobile communications,as well as to meet the development demands of future broadband mobile communications. The architecture introduces the Information Lamp (IL),a novel device carrying out transceiver function,as the access point,besides providing light. It fulfills information interaction between the access points and radio access network through the power line (or fiber). The new system,supported by core technologies such as multi-antenna based distributed space-time signal processing and distributed radio resource management,integrates the wired and wireless networks to provide high-speed and high-quality mobile communication services.
文摘When solving the routing problem with traditional ant colony algorithm, there is scarce in initialize pheromone and a slow convergence and stagnation for the complex network topology and the time-varying characteristics of channel in power line carrier communication of low voltage distribution grid. The algorithm is easy to fall into premature and local optimization. Proposed an automatic network algorithm based on improved transmission delay and the load factor as the evaluation factors. With the requirements of QoS, a logical topology of power line communication network is established. By the experiment of MATLAB simulation, verify that the improved Dynamic hybrid ant colony genetic algorithm (DH_ACGA) algorithm has improved the communication performance, which solved the QoS routing problems of power communication to some extent.
文摘Traditional resource allocation algorithms use the hierarchical system, which does not apply to the bad channel environment in broadband power line communication system. Introducing the idea of cross-layer can improve the utilization of resources and ensure the QoS of services. This paper proposes a cross-layer resource allocation on broadband power line based on QoS priority scheduling function on MAC layer. Firstly, the algorithm considers both of real-time users’ requirements for delay and non-real-time users’ requirements for queue length. And then user priority function is proposed. Then each user’s scheduled packets number is calculated according to its priority function. The scheduling sequences are based on the utility function. In physical layer, according to the scheduled packets, the algorithm allocates physical resources for packets. The simulation results show that the proposed algorithm give consideration to both latency and throughput of the system with improving users’ QoS.
基金supported by the National Natural Science Foundation of China (Grant Nos.60671055,60771060).
文摘High-speed broadband power line communication(BPL)is a novel and practicable technique for NetatHome or home area local area networking(LAN).Because of the characteristics of BPL,the electromagnetic wave emitted from the BPL transmission media will influence the indoor electromagnetic environment,which would also affect the performance of other wireless communications.Based on the analysis of the communication channel characteristic,network impedance and attenuation characteristic of the BPL,this paper proposes a novel model for calculating the BPL radiation and the computer simulation model,which are proved by the coherence of the simulation and the test data.The interferences from the high-speed BPL to indoor wireless communications are analyzed to stipulate the standards of high-speed BPL in the future.
基金supported by the Natural Science Foundation of Hebei Province of China (F2019201362,E2019502186)the Hebei University One Province One University Special Fundthe Fundamental Research Funds for the Central Universities (2018MS096).
文摘A hybrid model for broadband multiple-input multiple-output(MIMO) relay-aided indoor power line communications(PLC) system was proposed in this paper. The proposed model combines the top-down and bottom-up approaches and extends to a two-hop relay-aided cooperative system with variable gain relay in amplify-and-forward(AF) mode. Based on the proposed PLC model and generated channel, the channel statistical characteristics are further investigated in 2 MHz^100 MHz bandwidth. Simulated results show that the proposed model overcomes the difficulties that the existing models need a lot of topological information of the network or measurements information. It provides a practical simulation analysis method for cooperative relay MIMO-PLC system. The results also show that cooperative MIMO relaying communications can improve the indoor PLC performances and communication reliability.
文摘在Q/GDW 1379.4-2013通信单元检验技术规范的要求下,为测试低压宽带电力线载波通信单元的工作频段、载波信号发射功率谱密度、抗衰减能力、抗噪声干扰和抗阻抗变化等基本通信性能,给电网公司建设宽带电力载波远程集抄系统提供数据参考和方案依据。根据宽带电力线载波技术的特点搭建了点对点通信性能测试平台。该平台采用三级级联双SMA电源滤波组合,可有效隔离电网谐波、脉冲信号及电力线背景噪声对宽带载波通信单元性能的影响,使测试平台能够充分模拟低压电力线通道,还原现场集抄台区的运行状况,评估载波通信单元的实际可用性。试验数据证明:所建点对点通信性能测试平台试验环境纯净,对2MHz^30MHz通带内的信号衰减达93 d B,可确保宽带载波通信产品测试结果的稳定可靠。
文摘影响宽带电力线载波通信的关键因素之一是随机突发的脉冲噪声。目前的噪声研究大多停留在理论建模上,缺乏标准化的电力线噪声硬件实现方法。文中深入研究Markov-Middleton脉冲噪声模型,分析产生Markov性质的脉冲序列原理,利用System Generator和Xilinx Vivado联合仿真工具,设计出具有随机突发特性的电力线噪声生成系统,并完成该系统的硬件实现。通过对比现场可编程门阵列(FPGA)输出、Middleton Class A模型仿真与实测电力线噪声的统计特性,证明了该硬件实现方法能够生成具有随机突发性和时间相关性的脉冲噪声。通过搭建实验室环境下的电力线载波通信系统,测试不同参数下噪声对通信成功率的影响程度,对比其他的硬件实现方法,验证了所提方法的工程应用价值。
