Penetration depth,spray dispersion angle,droplet sizes in breakup processes and atomization processes are very important parameters in combustor of air-breathing engine.These processes will enhance air/fuel mixing ins...Penetration depth,spray dispersion angle,droplet sizes in breakup processes and atomization processes are very important parameters in combustor of air-breathing engine.These processes will enhance air/fuel mixing inside the combustor.Experimental results from the pulsed air-assist liquid jet injected into a cross-flow are investigated.And experiments were conducted to a range of cross-flow velocities from 42～136 m/s.Air is injected with 0～300kPa,with air-assist pulsation frequency of 0～20Hz.Pulsation frequency was modulated by solenoid valve.Phase Doppler Particle Analyzer(PDPA) was utilized to quantitatively measuring droplet characteristics.High-speed CCD camera was used to obtain injected spray structure.Pulsed air-assist liquid jet will offer rapid mixing and good liquid jet penetration.Air-assist makes a very fine droplet which generated mist-like spray.Pulsed air-assist liquid jet will introduce additional supplementary turbulent mixing and control of penetration depth into a cross-flow field.The results show that pulsation frequency has an effect on penetration,transverse velocities and droplet sizes.The experimental data generated in these studies are used for a development of active control strategies to optimize the liquid jet penetration in subsonic cross-flow conditions and predict combustion low frequency instability.展开更多
This paper describes the generation of pulsed, high-speed liquid jets usingthe cumulation method. This work mainly includes (1) the design of the nozzle assembly, (2) themeasurement of the jet velocity and (3) flow vi...This paper describes the generation of pulsed, high-speed liquid jets usingthe cumulation method. This work mainly includes (1) the design of the nozzle assembly, (2) themeasurement of the jet velocity and (3) flow visualization of the injection sequences. Thecumulation method can be briefly described as the liquid being accelerated first by the impact of amoving projectile and then further after it enters a converging section. The experimental resultsshow that the cumulation method is useful in obtaining a liquid jet with high velocity. The flowvisulization shows the roles of the Rayleigh-Tay-lor and Kelvin-Helmholtz instabilities in thebreakup of the liquid depend on the jet diameter and the downstream distance. When the liquid jetfront is far downstream from the nozzle exit, the jet is decelerated by air drag. Meanwhile, largecoherent vortex structures are formed surrounding the jet. The liquid will break up totally by theaction of these vortices. Experimental results showing the effect of the liquid volume on the jetvelocity are also included in this paper. Finally, a method for measuring the jet velocity bycutting two carbon rods is examined.展开更多
A transient thickness distribution measured with a high temporal resolution is elemental for exploring the flow characteristics and mechanism of a liquid film formed by an impinging jet.Therefore,this paper develops a...A transient thickness distribution measured with a high temporal resolution is elemental for exploring the flow characteristics and mechanism of a liquid film formed by an impinging jet.Therefore,this paper develops a high-speed Light-Emitting Diode-Induced Fluorescence(LEDIF)system based on the brightness measured directly above the liquid film.An Ultraviolet(UV)LED lamp is used to provide sufficient and continuous excitation light.Then,a system performance analysis proves that the system can continuously measure the global film thickness at a high acquisition frequency of 5000 Hz when the dye concentration is 200 mg/L.The influence of the irregularity of the excitation intensity,including the spatial non-uniformity,temporal instability,and long-term instability,on the measurement uncertainty is analyzed in detail.The analysis indicates that the system has an acceptable uncertainty of 10%.Compared with theoretical results,experimental results verify that the LEDIF system can accurately measure the global thickness of a liquid film formed by a water jet obliquely impinging onto a plate.An experimental investigation of the radial section of the raised zone demonstrates that the radial section changes from a sewing needle to an oval when the azimuth angle increases from 10°to 90°.Meanwhile,the dynamic contact angle exponentially decreases from 41.4°to 30.1°.A dynamic analysis of surface waves shows that the measured wave velocity decreases from 12 m/s to 1 m/s and the dominant frequency decreases from 1000 Hz to 10 Hz along the flow direction.展开更多
基金supported by the Korea Research Foundation Grant funded by the Korean Government (MOEHRD,Basic Research Promotion Fund) (KRF-2007-D00084)
文摘Penetration depth,spray dispersion angle,droplet sizes in breakup processes and atomization processes are very important parameters in combustor of air-breathing engine.These processes will enhance air/fuel mixing inside the combustor.Experimental results from the pulsed air-assist liquid jet injected into a cross-flow are investigated.And experiments were conducted to a range of cross-flow velocities from 42～136 m/s.Air is injected with 0～300kPa,with air-assist pulsation frequency of 0～20Hz.Pulsation frequency was modulated by solenoid valve.Phase Doppler Particle Analyzer(PDPA) was utilized to quantitatively measuring droplet characteristics.High-speed CCD camera was used to obtain injected spray structure.Pulsed air-assist liquid jet will offer rapid mixing and good liquid jet penetration.Air-assist makes a very fine droplet which generated mist-like spray.Pulsed air-assist liquid jet will introduce additional supplementary turbulent mixing and control of penetration depth into a cross-flow field.The results show that pulsation frequency has an effect on penetration,transverse velocities and droplet sizes.The experimental data generated in these studies are used for a development of active control strategies to optimize the liquid jet penetration in subsonic cross-flow conditions and predict combustion low frequency instability.
文摘This paper describes the generation of pulsed, high-speed liquid jets usingthe cumulation method. This work mainly includes (1) the design of the nozzle assembly, (2) themeasurement of the jet velocity and (3) flow visualization of the injection sequences. Thecumulation method can be briefly described as the liquid being accelerated first by the impact of amoving projectile and then further after it enters a converging section. The experimental resultsshow that the cumulation method is useful in obtaining a liquid jet with high velocity. The flowvisulization shows the roles of the Rayleigh-Tay-lor and Kelvin-Helmholtz instabilities in thebreakup of the liquid depend on the jet diameter and the downstream distance. When the liquid jetfront is far downstream from the nozzle exit, the jet is decelerated by air drag. Meanwhile, largecoherent vortex structures are formed surrounding the jet. The liquid will break up totally by theaction of these vortices. Experimental results showing the effect of the liquid volume on the jetvelocity are also included in this paper. Finally, a method for measuring the jet velocity bycutting two carbon rods is examined.
基金supported by the Provincial or Ministerial Level Project,China。
文摘A transient thickness distribution measured with a high temporal resolution is elemental for exploring the flow characteristics and mechanism of a liquid film formed by an impinging jet.Therefore,this paper develops a high-speed Light-Emitting Diode-Induced Fluorescence(LEDIF)system based on the brightness measured directly above the liquid film.An Ultraviolet(UV)LED lamp is used to provide sufficient and continuous excitation light.Then,a system performance analysis proves that the system can continuously measure the global film thickness at a high acquisition frequency of 5000 Hz when the dye concentration is 200 mg/L.The influence of the irregularity of the excitation intensity,including the spatial non-uniformity,temporal instability,and long-term instability,on the measurement uncertainty is analyzed in detail.The analysis indicates that the system has an acceptable uncertainty of 10%.Compared with theoretical results,experimental results verify that the LEDIF system can accurately measure the global thickness of a liquid film formed by a water jet obliquely impinging onto a plate.An experimental investigation of the radial section of the raised zone demonstrates that the radial section changes from a sewing needle to an oval when the azimuth angle increases from 10°to 90°.Meanwhile,the dynamic contact angle exponentially decreases from 41.4°to 30.1°.A dynamic analysis of surface waves shows that the measured wave velocity decreases from 12 m/s to 1 m/s and the dominant frequency decreases from 1000 Hz to 10 Hz along the flow direction.
