Influence of pier height on the safety of trains running on high-speed railway bridges during earthquakes

Sudden earthquakes pose a threat to the running safety of trains on high-speed railway bridges,and the stiffness of piers is one of the factors affecting the dynamic response of train-track-bridge system.In this paper,a experiment of a train running on a high-speed railway bridge is performed based on a dynamic experiment system,and the corresponding numerical model is established.The reliability of the numerical model is verified by experiments.Then,the experiment and numerical data are analyzed to reveal the pier height effects on the running safety of trains on bridges.The results show that when the pier height changes,the frequency of the bridge below the 30 m pier height changes greater;the increase of pier height causes the transverse fundamental frequency of the bridge close to that of the train,and the shaking angle and lateral displacement of the train are the largest for bridge with 50 m pier,which increases the risk of derailment;with the pier height increases from 8 m to 50 m,the derailment coefficient obtained by numerical simulations increases by 75% on average,and the spectral intensity obtained by experiments increases by 120% on average,two indicators exhibit logarithmic variation.

Reflection on methodology of the correlation between electromagnetic interference and safety in high-speed railway

Purpose – In the continuous development of high-speed railways, ensuring the safety of the operation controlsystem is crucial. Electromagnetic interference (EMI) faults in signaling equipment may cause transportationinterruptions, delays and even threaten the safety of train operations. Exploring the impact of disturbances onsignaling equipment and establishing evaluation methods for the correlation between EMI and safety isurgently needed.Design/methodology/approach – This paper elaborates on the necessity and significance of studying theimpact of EMI as an unavoidable and widespread risk factor in the external environment of high-speed railwayoperations and continuous development. The current status of research methods and achievements from theperspectives of standard systems, reliability analysis and safety assessment are examined layer by layer.Additionally, it provides prospects for innovative ideas for exploring the quantitative correlation between EMIand signaling safety.Findings – Despite certain innovative achievements in both domestic and international standard systems andrelated research for ensuring and evaluating railway signaling safety, there’s a lack of quantitative and strategic research on the degradation of safety performance in signaling equipment due to EMI. A quantitativecorrelation between EMI and safety has yet to be established. On this basis, this paper proposes considerationsfor research methods pertaining to the correlation between EMI and safety.Originality/value – This paper overviews a series of methods and outcomes derived from domestic andinternational studies regarding railway signaling safety, encompassing standard systems, reliability analysisand safety assessment. Recognizing the necessity for quantitatively describing and predicting the impact ofEMI on high-speed railway signaling safety, an innovative approach using risk assessment techniques as abridge to establish the correlation between EMI and signaling safety is proposed.

Virtual sample generation for model-based prognostics and health management of on-board high-speed train control system

In view of class imbalance in data-driven modeling for Prognostics and Health Management(PHM),existing classification methods may fail in generating effective fault prediction models for the on-board high-speed train control equipment.A virtual sample generation solution based on Generative Adversarial Network(GAN)is proposed to overcome this shortcoming.Aiming at augmenting the sample classes with the imbalanced data problem,the GAN-based virtual sample generation strategy is embedded into the establishment of fault prediction models.Under the PHM framework of the on-board train control system,the virtual sample generation principle and the detailed procedures are presented.With the enhanced class-balancing mechanism and the designed sample augmentation logic,the PHM scheme of the on-board train control equipment has powerful data condition adaptability and can effectively predict the fault probability and life cycle status.Practical data from a specific type of on-board train control system is employed for the validation of the presented solution.The comparative results indicate that GAN-based sample augmentation is capable of achieving a desirable sample balancing level and enhancing the performance of correspondingly derived fault prediction models for the Condition-based Maintenance(CBM)operations.

Safety and Quality Control Management Strategy for Urban Railway Engineering Construction

The safety management of urban railway engineering construction involves many different aspects and a wide scope,playing an important role in guaranteeing the safety of construction projects.Management agencies have more stringent requirements on the quality of railway construction.The overall quality of a construction project should meet the construction requirements before the project can be carried out.In this article,the problems in the actual work of the entire life cycle of safety management are explained,and the lessons and experience pertaining to the safety and quality of urban railway construction projects are discussed.The purpose of this paper is to provide references for the management of urban railway construction.

Deformation characteristics and safety assessment of a high-speed railway induced by undercutting metro tunnel excavation

Stratum deformation(settlement) is a challenging issue in tunnel engineering, especially when construction of metro tunnels has to undercut high-speed railway. For this purpose, we used the FLAC30 software to analyze the stratum settlement characteristics of high-speed railway at different crossing angles intersected by metro tunnel, in terms of ground settlement trough, stratum slip line and irregularity of ballastless tracks. According to the evolution of the stratum settlement at different angle regions, an optimized angle is proposed for the actual project design. In order to reduce the influence of stratum settlement on the safety of high-speed railway, an approach of safety assessment is proposed for the shield engineering undercutting high-speed railway, as per Chinese specifications using numerical results and on-site conditions. A case study is conducted for the shield tunnel section crossing the Wuhan-Guangzhou High-speed Railway between the Guangzhou North Railway Station and the Huacheng Road Station, which represents the first metro tunnel project passing below a high-speed railway in China. A series of measures is taken to ensure the safe excavation of the shield tunnel and the operation of the high-speed railway. The results can provide a technical support for performing a safety evaluation between high-speed railways and metro tunnels.

Dynamic response limit of high-speed railway bridge under earthquake considering running safety performance of train

Due to the wide railway network and different characteristics of many earthquake zones in China,considering the running safety performance of trains(RSPT)in the design of high-speed railway bridge structures is very necessary.In this study,in order to provide the seismic design and evaluation measure of the bridge structure based on the RSPT,a calculation model of RSPT on bridge under earthquake was established,and the track surface response measure when the derailment coefficient reaches the limit value was calculated by referring to 15 commonly used ground motion(GM)intensity measures.Based on the coefficient of variation of the limit value obtained from multiple GM samples,the optimal measures were selected.Finally,the limit value of bridge seismic response based on RSPT with different train speeds and structural periods was determined.

High-speed Railway Development and Disaster Prevention and Safety Monitoring System at Home and Abroad

With consideration of railway operation in China and accompanying acci-dents and breakdowns, high-speed railway in China, Japan, France and Germany was analyzed, and the suggestions in intensifying high-speed railway safety and disaster prevention were proposed, providing references for high-speed railway safety management and operation.

Research on Active Safety Methodologies for Intelligent Railway Systems

Safety is essential when building a strong transportation system.As a key development direction in the global railway system,the intelligent railway has safety at its core,making safety a top priority while pursuing the goals of efficiency,convenience,economy,and environmental friendliness.This paper describes the state of the art and proposes a system architecture for intelligent railway systems.It also focuses on the development of railway safety technology at home and abroad,and proposes the active safety method and technology system based on advanced theoretical methods such as the in-depth integration of cyber–physical systems(CPS),data-driven models,and intelligent computing.Finally,several typical applications are demonstrated to verify the advancement and feasibility of active safety technology in intelligent railway systems.

Seismic safety assessment of trains running on high-speed railway bridges with chloride-induced corroding piers

For the lifetime assessment of the running safety of a train in aggressive environments and earthquake-prone areas,the effects of corrosion on seismic performance must be considered.Research on the running safety of trains,including corrosion damage,is limited,despite the fact that seismic safety assessment of trains on high-speed railway bridges has been extensively examined.In this work,the running safety of a train was evaluated using a time-varying corroded bridge finite-element model established in OpenSees.Two pier types were considered,and three ground-motion types were selected for performing seismic performance evaluations.Subsequently,the seismic response of the corroded bridge-track structure under an earthquake was analyzed.The spectrum intensity was used as the structural response index for the running safety assessment of trains under earthquakes,and the long-term safety of trains on bridges with different pier heights and earthquake types,considering different corroding deterioration,was evaluated.The results indicate that under low-level earthquakes,piers are primarily in a linear elastic state and least influenced by corrosion;whereas under high-level earthquakes,the running safety of trains on a bridge significantly deteriorates after corrosion,particularly for high-pier bridges,mainly because the corroded piers are more likely to yield lower post-yield stiffness.The results of this study suggest that in the seismic safety assessment of trains on corroded bridges,timevarying seismic performance characteristics should be considered.

Flexible Optimal Model and Algorithm for Track Utilization in High-speed Railway Stations

Track utilization is the most important technical operation in high-speed railway stations.It is an effective way to take flexible man-agement based on dispatchers’decision preferences into consideration for making track utilization plans to relieve the influence caused by unmeasurable unstructured factors.Thus,based on the flexible management concept and taking the flexible optimal for track utilization in high-speed railway stations as the object,time and space occupation safety trajectories of arrival routes,departure routes and tracks are all analysed.Then,taking the following constraints into consideration-minimum safety time intervals for var-ious routes and tracks occupation,space-time arc occupation and decision-makers’preferences-a flexible optimal model for track utilization in high-speed railway stations is established to maximize its balance and robustness and to minimize its volatility at the same time.Further,a flexible optimal solution based on a simulated annealing algorithm is designed to make a safety track utilization plan in high-speed railway stations integrating the dispatchers’decision preference.The results from the experiments show that the proposed methodology can effectively make satisfied safety track utilization plans based on decision-makers’preferences,which can improve its balance and robustness level significantly.Meanwhile,its volatility can be reduced as much as possible caused by flexible management based on artificial intervention to ensure the relative stability of the plan.

Safety threshold of high-speed railway pier settlement based on train-track-bridge dynamic interaction

This paper presents a method to determine the safety threshold of bridge pier settlement in high-speed railways.An analytical expression of the mapping relationship between the pier settlement and the rail deformation is derived theoretically for the double block ballastless track-bridge system.By adopting the superposition of the track random irregularity and the rail deformation caused by the pier settlement as the excitation inputs,the variations of vehicle dynamics indices with pier settlement are comparatively analyzed.Then,the safety threshold of the bridge pier settlement is obtained according to the limit of vehicle running safety and ride comfort indices of the high-speed trains.Results show that the dynamics indices of different trains have different sensitivities to the pier settlement,and the train CRH2C is the most sensitive one among all the types of Chinese high-speed trains.When passing through the bridges in common span with pier settlement at the speed of 250–350 km/h,the trains suffer the low-frequency excitations,and the vertical acceleration of car body is most sensitive to the pier settlement of all the dynamics indices.When the car body vertical acceleration just exceeds the allowable limit,the critical settlement value is 23.4 mm,which is much bigger than the pier differential settlement limit in the current code for Chinese high-speed railways.

Review and prospect of maintenance technology for traction system of high-speed train

In the past few decades,high-speed trains have witnessed tremendous and vigorous development with the appearance of the oil crisis and industrialization,which became a significant trend in the transportation industry the world over.With the increase of high-speed railway mileage,the amount of high-speed train has grown sharply,the service life of the trains has increased gradually and the components of the vehicle traction system have become worn and aged as a result.Therefore,advanced maintenance technology and its application are key factors to reduce maintenance cost,human resource input and ensure safe,stable and reliable operation of trains.This paper summarizes and discusses the development,application mode,maintenance management and maintenance technology of high-speed railways of the major countries in the world,especially discusses the condition-based maintenance and the key technology of the traction electrical system,and offers the prospect of research direction and the development of traction maintenance technology.