The microstructures in the electroformed copper liners of shapedcharges after high-strain-rate plastic deformation were in-vestigated by transmission electron microscopy(TEM). Meanwhile, theorientation distribution of...The microstructures in the electroformed copper liners of shapedcharges after high-strain-rate plastic deformation were in-vestigated by transmission electron microscopy(TEM). Meanwhile, theorientation distribution of the grains in the recovered slug wasexamined by the electron backscattering Kikuchipattern(EBSP)technique. EBSP analysis illustrated that unlike theas-formed electro- formed copper liners of shaped charges the grainorientations in the recovered slug are distributed along randomly allthe directions after undergoing heavily strain deformation athigh-strain rate. Optical microscopy shows a typicalrecrystallization structure, and TEM exam- ination revealsdislocation cells existed in the thin foil specimen. These resultsindicate that dynamic recovery and recrystallization occur duringthis plastic deformation process, and the associated deformationtemperature is considered to be higher than 0.6 times the meltingpoint of copper.展开更多
The as-formed and post-deformed microstructures in both electroformed and spin-formed copper liners of shaped charge were studied by optical microscopy(OM), electron backscattering Kikuchi patterns(EBSP) technique and...The as-formed and post-deformed microstructures in both electroformed and spin-formed copper liners of shaped charge were studied by optical microscopy(OM), electron backscattering Kikuchi patterns(EBSP) technique and transmission electron microscopy(TEM). The deformation was carried out at an ultra-high strain rate. OM analysis shows that the initial grains of the electroformed copper liner are finer than those of the spin-formed copper liners. Meanwhile, EBSP analysis reveals that the fiber texture exists in the electroformed copper liners, whereas there is no texture observed in the spin-formed copper liners before deformation. Having undergone high-strain-rate deformation the grains in the recovered slugs, which are transformed from both the electroformed and spin-formed copper liners, all become small. TEM observations of the above two kinds of post-deformed specimens show the existence of cellular structures characterized by tangled dislocations and subgrain boundaries consisting of dislocation arrays. These experimental results indicate that dynamic recovery and recrystallization play an important role in the high-strain-rate deformation process.展开更多
The coupling effects of ultrasonic excitation and high-strain-rate deformation are the core factors for weld formation during ultrasonic welding.However,interfacial deformation behavior still shrouds in uncer-tainty b...The coupling effects of ultrasonic excitation and high-strain-rate deformation are the core factors for weld formation during ultrasonic welding.However,interfacial deformation behavior still shrouds in uncer-tainty because of the contradictory features between mutual dislocation retardation caused by severely frictional deformation and ultrasonic-accelerated dislocation motion.[101]and[111]-oriented Cu single crystals which tended to form geometrically necessary boundaries(GNBs)were selected as the welding substrates to trace the uniquely acoustoplastic effects in the interfacial region under the ultrasonically excited high-strain-rate deformation.It was indicated that for a low energy input,micro-welds localized at the specific interface region,and equiaxed dislocation cells substituting for GNBs dominated in the ini-tial single crystal rotation region.As the welding energy increased,continuous shear deformation drove the dynamic recrystallization region covered by equiaxed grains to spread progressively.Limited discrete dislocations inside the recrystallized grains and nascent dislocation cells at the grain boundaries were ob-served in[101]and[111]joints simultaneously,suggesting that the ultrasonic excitation promoted motion of intragranular dislocation and pile-up along the sub-grain boundaries.The interfacial morphology be-fore and after expansion of recrystallization region all exhibited the weakening of orientation constraint on dislocation motion,which was also confirmed by the similar micro-hardness in joint interface.The first-principle calculation and applied strain-rate analysis further revealed that ultrasonic excitation en-hanced dislocation slipping,and enabled dislocation motion to accommodate severe plastic deformation at a high-strain-rate.展开更多
The dynamic mechanical properties of reactive powder concrete subjected to compressive impacts with high strain rates ranging from 10 to 1.1×102 s-1 were investigated by means of SHPB (split-Hopkinson-pressure-ba...The dynamic mechanical properties of reactive powder concrete subjected to compressive impacts with high strain rates ranging from 10 to 1.1×102 s-1 were investigated by means of SHPB (split-Hopkinson-pressure-bar) tests of the cylindrical specimens with five different steel fiber volumetric fractions.The properties of wave stress transmission,failure,strength,and energy consumption of RPC with varied fiber volumes and impact strain rates were analyzed.The influences of impact strain rates and fiber volumes on those properties were characterized as well.The general forms of the dynamic stress-strain relationships of RPC were modeled based on the experimental data.The investigations indicate that for the plain RPC the stress response is greater than the strain response,showing strong brittle performance.The RPC with a certain volume of fibers sustains higher strain rate impact and exhibits better deformability as compared with the plain RPC.With a constant fiber fraction,the peak compressive strength,corresponding peak strain and the residual strain of the fiber-reinforced RPC rise by varying amounts when the impact strain rate increases,with the residual strain demonstrating the greatest increment.Elevating the fiber content makes trivial contribution to improving the residual deformability of RPC when the impact strain rate is constant.The tests also show that the fiber content affects the peak compressive strength and the peak deformability of RPC in a different manner.With a constant impact strain rate and the fiber fraction less than 1.75%,the peak compressive strength rises with an increasing fiber volume.The peak compressive strength tends to decrease as the fiber volume exceeds 1.75%.The corresponding peak strain,however,incessantly rises with the increasing fiber volume.The total energy Edisp that RPC consumed during the period from the beginning of impacts to the time of residual strains elevates with the fiber volume increment as long as the fiber fraction is not larger than 2%.It turns to decrease if the fiber volume exceeds 2%.The added fibers make various contributions to enhancing the capability of RPC to consume energy at different loading stages.If the fiber fraction is not larger than 2%,the added fibers make more contribution to enhancing the energy consumption ability of RPC in the period before the peak strain than in the period after the peak strain.The impact strain rate,however,distinctively affects the total energy that RPC consumed and the energy consumed in the different loading periods.The higher the impact strain rate,the more the energy consumed in the stages and therefore the higher the dynamic impact toughness.The empirical relationships of the peak compressive strength,corresponding peak strain,residual strain,total consumed energy and the energy consumed in the varied periods with the impact strain rate and the fiber fraction are derived.Four generalized forms of the dynamic impact stress-strain responses of RPC are formulated by normalizing stresses and strains as the generalized coordinates and by taking account of the influences of impact strain rates and fiber volumetric fractions.展开更多
基金financially supported by the National Natural Science Foundation of China (No.59971008).
文摘The microstructures in the electroformed copper liners of shapedcharges after high-strain-rate plastic deformation were in-vestigated by transmission electron microscopy(TEM). Meanwhile, theorientation distribution of the grains in the recovered slug wasexamined by the electron backscattering Kikuchipattern(EBSP)technique. EBSP analysis illustrated that unlike theas-formed electro- formed copper liners of shaped charges the grainorientations in the recovered slug are distributed along randomly allthe directions after undergoing heavily strain deformation athigh-strain rate. Optical microscopy shows a typicalrecrystallization structure, and TEM exam- ination revealsdislocation cells existed in the thin foil specimen. These resultsindicate that dynamic recovery and recrystallization occur duringthis plastic deformation process, and the associated deformationtemperature is considered to be higher than 0.6 times the meltingpoint of copper.
基金Project(571014569) supported by the National Natural Science Foundation of China
文摘The as-formed and post-deformed microstructures in both electroformed and spin-formed copper liners of shaped charge were studied by optical microscopy(OM), electron backscattering Kikuchi patterns(EBSP) technique and transmission electron microscopy(TEM). The deformation was carried out at an ultra-high strain rate. OM analysis shows that the initial grains of the electroformed copper liner are finer than those of the spin-formed copper liners. Meanwhile, EBSP analysis reveals that the fiber texture exists in the electroformed copper liners, whereas there is no texture observed in the spin-formed copper liners before deformation. Having undergone high-strain-rate deformation the grains in the recovered slugs, which are transformed from both the electroformed and spin-formed copper liners, all become small. TEM observations of the above two kinds of post-deformed specimens show the existence of cellular structures characterized by tangled dislocations and subgrain boundaries consisting of dislocation arrays. These experimental results indicate that dynamic recovery and recrystallization play an important role in the high-strain-rate deformation process.
基金supported by the National Nat-ural Science Foundation of China(No.52175310)A part of the work was also supported by the National Science and Technology Major Project(No.2017-VI-0009-0080)+1 种基金the Guang-dong Province Key Research and Development Program(No.2019B010935001)and the Shenzhen Science and Technology Plan(No.GXWD20201230155427003-20200821172456002).
文摘The coupling effects of ultrasonic excitation and high-strain-rate deformation are the core factors for weld formation during ultrasonic welding.However,interfacial deformation behavior still shrouds in uncer-tainty because of the contradictory features between mutual dislocation retardation caused by severely frictional deformation and ultrasonic-accelerated dislocation motion.[101]and[111]-oriented Cu single crystals which tended to form geometrically necessary boundaries(GNBs)were selected as the welding substrates to trace the uniquely acoustoplastic effects in the interfacial region under the ultrasonically excited high-strain-rate deformation.It was indicated that for a low energy input,micro-welds localized at the specific interface region,and equiaxed dislocation cells substituting for GNBs dominated in the ini-tial single crystal rotation region.As the welding energy increased,continuous shear deformation drove the dynamic recrystallization region covered by equiaxed grains to spread progressively.Limited discrete dislocations inside the recrystallized grains and nascent dislocation cells at the grain boundaries were ob-served in[101]and[111]joints simultaneously,suggesting that the ultrasonic excitation promoted motion of intragranular dislocation and pile-up along the sub-grain boundaries.The interfacial morphology be-fore and after expansion of recrystallization region all exhibited the weakening of orientation constraint on dislocation motion,which was also confirmed by the similar micro-hardness in joint interface.The first-principle calculation and applied strain-rate analysis further revealed that ultrasonic excitation en-hanced dislocation slipping,and enabled dislocation motion to accommodate severe plastic deformation at a high-strain-rate.
基金supported by the National Natural Science Foundation of China (Grant No. 50974125)the National Basic Research Project of China ("973" Project) (Grant Nos. 2010CB226804, 2002CB412705)the Natural Sciences and Engineering Research Council of Canada (PGS-D2-2006) and the Beijing Key Laboratory Projects
文摘The dynamic mechanical properties of reactive powder concrete subjected to compressive impacts with high strain rates ranging from 10 to 1.1×102 s-1 were investigated by means of SHPB (split-Hopkinson-pressure-bar) tests of the cylindrical specimens with five different steel fiber volumetric fractions.The properties of wave stress transmission,failure,strength,and energy consumption of RPC with varied fiber volumes and impact strain rates were analyzed.The influences of impact strain rates and fiber volumes on those properties were characterized as well.The general forms of the dynamic stress-strain relationships of RPC were modeled based on the experimental data.The investigations indicate that for the plain RPC the stress response is greater than the strain response,showing strong brittle performance.The RPC with a certain volume of fibers sustains higher strain rate impact and exhibits better deformability as compared with the plain RPC.With a constant fiber fraction,the peak compressive strength,corresponding peak strain and the residual strain of the fiber-reinforced RPC rise by varying amounts when the impact strain rate increases,with the residual strain demonstrating the greatest increment.Elevating the fiber content makes trivial contribution to improving the residual deformability of RPC when the impact strain rate is constant.The tests also show that the fiber content affects the peak compressive strength and the peak deformability of RPC in a different manner.With a constant impact strain rate and the fiber fraction less than 1.75%,the peak compressive strength rises with an increasing fiber volume.The peak compressive strength tends to decrease as the fiber volume exceeds 1.75%.The corresponding peak strain,however,incessantly rises with the increasing fiber volume.The total energy Edisp that RPC consumed during the period from the beginning of impacts to the time of residual strains elevates with the fiber volume increment as long as the fiber fraction is not larger than 2%.It turns to decrease if the fiber volume exceeds 2%.The added fibers make various contributions to enhancing the capability of RPC to consume energy at different loading stages.If the fiber fraction is not larger than 2%,the added fibers make more contribution to enhancing the energy consumption ability of RPC in the period before the peak strain than in the period after the peak strain.The impact strain rate,however,distinctively affects the total energy that RPC consumed and the energy consumed in the different loading periods.The higher the impact strain rate,the more the energy consumed in the stages and therefore the higher the dynamic impact toughness.The empirical relationships of the peak compressive strength,corresponding peak strain,residual strain,total consumed energy and the energy consumed in the varied periods with the impact strain rate and the fiber fraction are derived.Four generalized forms of the dynamic impact stress-strain responses of RPC are formulated by normalizing stresses and strains as the generalized coordinates and by taking account of the influences of impact strain rates and fiber volumetric fractions.