Further Analysis of Machine Tool Dimensional Accuracy and Thermal Stability under Varying Floor Temperature

Machining is as old as humanity, and changes in temperature in both the machine’s internal and external environments can be of great concern as they affect the machine’s thermal stability and, thus, the machine’s dimensional accuracy. This paper is a continuation of our earlier work, which aimed to analyze the effect of the internal temperature of a machine tool as the machine is put into operation and vary the external temperature, the machine floor temperature. Some experiments are carried out under controlled conditions to study how machine tool components get heated up and how this heating up affects the machine’s accuracy due to thermally induced deviations. Additionally, another angle is added by varying the machine floor temperature. The parameters mentioned above are explored in line with the overall thermal stability of the machine tool and its dimensional accuracy. A Robodrill CNC machine tool is used. The CNC was first soaked with thermal energy by gradually raising the machine floor temperature to a certain level before putting the machine in operation. The machine was monitored, and analytical methods were deplored to evaluate thermal stability. Secondly, the machine was run idle for some time under raised floor temperature before it was put into operation. Data was also collected and analyzed. It is observed that machine thermal stability can be achieved in several ways depending on how the above parameters are joggled. This paper, in conclusion, reinforces the idea of machine tool warm-up process in conjunction with a carefully analyzed and established machine floor temperature variation for the approximation of the machine tool’s thermally stability to map the long-time behavior of the machine tool.

Dimensionality regulation in tin halide perovskite solar cells: Toward high performance and stability

Tin halide perovskites(THPs)have received extensive attention due to their low toxicity and excellent optoelectronic properties,and are considered to be the most promising alternatives to develop efficient lead-free perovskite solar cells.However,due to the unique and inherent characteristics of Sn^(2+)being easily oxidized to Sn^(4+)and fast crystallization,tin perovskite solar cells(TPSCs)show relatively poor performance and stability,compared to the lead counterparts.Recently,the introduction of bulky organic spacers into three-dimensional(3D)THPs for dimensional regulation can not only prevent the intrusion of water and oxygen,but also inhibit the self-doping effect and ion migration.In this review,we will detail how dimensional regulation enables TPSCs with high performance and superior stability.First,we summarize the intrinsic properties of THPs and analyze the root causes of their poor performance and instability.Next,we discuss the specific structure and types of the dimensional regulation strategy.Then,the mechanism of dimensional regulation is discussed in detail,mainly from inhibiting the Sn^(2+)oxidation,optimizing crystallization,passivating defects,and improving energy level alignment.Finally,future challenges and prospects for dimensional regulation are elaborated to help researchers develop more efficient and stable TPSCs.

Study on creep deformation and energy development of underground surrounding rock under four‐dimensional support

There is an urgent need to develop optimal solutions for deformation control of deep high‐stress roadways,one of the critical problems in underground engineering.The previously proposed four‐dimensional support(hereinafter 4D support),as a new support technology,can set the roadway surrounding rock under three‐dimensional pressure in the new balanced structure,and prevent instability of surrounding rock in underground engineering.However,the influence of roadway depth and creep deformation on the surrounding rock supported by 4D support is still unknown.This study investigated the influence of roadway depth and creep deformation time on the instability of surrounding rock by analyzing the energy development.The elastic strain energy was analyzed using the program redeveloped in FLAC3D.The numerical simulation results indicate that the combined support mode of 4D roof supports and conventional side supports is highly applicable to the stability control of surrounding rock with a roadway depth exceeding 520 m.With the increase of roadway depth,4D support can effectively restrain the area and depth of plastic deformation in the surrounding rock.Further,4D support limits the accumulation range and rate of elastic strain energy as the creep deformation time increases.4D support can effectively reduce the plastic deformation of roadway surrounding rock and maintain the stability for a long deformation period of 6 months.As confirmed by in situ monitoring results,4D support is more effective for the long‐term stability control of surrounding rock than conventional support.

Analysis of the Mechanism and Effectiveness of Lignin in Improving the High-Temperature Thermal Stability of Asphalt

The use of lignin,which is a by-product of the pulp and paper industry,in the development of asphalt binders would contribute to waste reduction,providing environmental,economic,and social benefits.In this study,samples of lignin-modified asphalt binder samples with different content of lignin(3%,6%,9%,12%,and 15%)and unmodified asphalt(control)were tested using Fourier transform infrared spectroscopy(FTIR),dynamic shear rheometer(DSR),and thermogravimetry.The mechanism and effectiveness of lignin in improving the thermal stability of asphalt at high temperatures were analyzed.The FTIR analysis shows that no new characteristic absorption peak is seen in the infrared spectral of the lignin-modified asphalt binder samples,and some bands characteristic of lignin-related peaks gradually increased with the increase of lignin content.This suggests that the modification of lignin-modified asphalt binder samples was due to physical blending rather than chemical modification.The increase of lignin content in the lignin-modified asphalt samples increases the complex shear modulus G*of the samples and decreases the phase angles of the samples.Similarly,the anti-rutting performance(G*/sinδ)of the samples improves with the increase in lignin content,but this is not significant after any addition of lignin that exceeds 12%of asphalt mass.Thermal characterizations show that the thermal decomposition rate of lignin is lower,and its residual amount is higher compared to that of asphalt,which is a major reason for the improved stability of lignin-modified asphalt binders at high temperatures.The effect of lignin on the thermal stability of asphalt is dependent on both lignin content and temperature.It has a positive effect on the thermal stability of asphalt at high temperatures within the range of asphalt service temperature(25℃–200℃).Additionally,from the pyrolysis viewpoint,it was explained that excessive lignin addition is not beneficial to the thermal stability of asphalt at high temperatures,which is consistent with the DSR test result conducted high temperatures.

Decay resistance and dimensional stability improvement of wood by low melting point alloy heat treatment

Wood has no inherent natural resistance against agents of biodegradation. We evaluated the effects of metal bath heat treatment(MBHT) on decay resistance and dimensional stability of Chinese parasol(Firmiana simplex) and Chinese fir(Cunninghamia lanceolata) wood. A low melting point alloy was used as heating medium in the treatment of the wood samples at 150, 180, and 210 °C for2, 4, and 8 h. Heat-treated and control samples were exposed to brown rot fungus(Poria placenta) and white rot fungus(Coriolus versicolor) for decay resistance testing and anti-swelling efficiency(ASE). The improved decay resistance with increase temperatures with low mass losses of 7.3 and 7.3% for F. simplex, and 3.9 and 3.6% for C.lanceolata at 210 °C for 8 h against Coriolus versicolor and Poria placenta, respectively. ASE indicated that MBHT contributed to improved dimensional stability of both wood species after treatment. Scanning electron micrograph results indicate that metal bath-treated samples showed strong decay resistance. Therefore, our approach to thermally modify wood should be explored to overcome the energy utilization by using low melting point alloy for the heat treatment of wood.

Effect of heat treatment on microstructure and dimensional stability of ZL114A aluminum alloy

The effects of heat treatment process on microstructure,micro-yield strength and dynamic dimensional stability of ZL114A aluminum alloy were investigated by optical microscopy(OM),transmission electron microscopy(TEM),tensile testing and thermal cycling on-line measuring method.Fine dispersed eutectic Si phases are observed,and long strip eutectic Si and massive primary Si phases decrease in ZL114A alloy after high-temperature and long-time solution treatment,which result in the increase of micro-plastic deformation resistance.With the increasing of aging temperature,aging precipitation behaviour of ZL114A alloy transforms from precipitation of GP zone and β' phases simultaneously at lower temperature to precipitation of stable Mg2Si phases at higher temperature.Because coherent strengthening is the main strengthen mechanism for micro-plastic deformation,precipitation of stable Mg2Si phases is unfavorable to the improvement of micro-plastic deformation resistance.Micro-yield strength cannot characterize dimensional stability comprehensively,and dynamic dimensional stability under alternative temperature should also be tested cooperatively for better evaluation of dimensional stability.

Study of High-Temperature Stability of Pyrochlore Zirconates

Based on defect chemistry theory and molecular dynamics,the defect formation energy and its relationship with the mechanism of pyrochlore-fluorite phase change were investigated,so as to reveal the underlying mechanism of high-temperature stability of pyrochlore zirconates.Results showed that with the rise of the atom mass of A,the defect formation energies decreased that meant the crystal structure tended to become more disordered.Noticeably,the first nearest cation antisite dominated the pyrochlore disorder transformation process.In addition,it was found that the diffusion of oxygen atoms was far higher than that of cations,and was increased with the temperature,thus also promoting the pyrochlore-fluorite transformation process.

Thermal expansion and dimensional stability of unidirectional and orthogonal fabric M40/AZ91D composites

Unidirectional (60%, volume fraction) and orthogonal (50%, volume fraction) M40 graphite fibre reinforced AZ91D magnesium alloy matrix composites were fabricated by pressure infiltration method. The coefficients of thermal expansion (in the temperature range of 20-350 ℃) and dimensional stability (in the temperature range of 20-150 ℃) of the composites and the corresponding AZ91D magnesium alloy matrix were measured. The results show that coefficients of thermal expansion of the composites in longitudinal direction decrease with elevating temperature. The coefficients of thermal expansion (CTE) for unidirectional M40/AZ91D composites and orthogonal M40/AZ91D composites are 1.24×10-6 ℃-1 and 5.71×10-6 ℃-1 at 20 ℃, and 0.85×10-6 ℃-1 and 2.75×10-6 ℃-1 at 350 ℃, respectively, much lower than those of the AZ91D alloy matrix. Thermal cycling testing demonstrates that the thermal stress plays an important role on residual deformation. Thus, a better dimensional stability is obtained for the AZ91D magnesium alloy matrix composites. More extreme strain hysteresis and residual plastic deformation are observed in orthogonally fabric M40 reinforced AZ91D composite, but its net residual strain after each cycle is similar to that of the unidirectional M40/AZ91D composite.

Dimensional Stability Properties of Medium Density Fibreboard (MDF) from Treated Oil Palm (Elaeis guineensis) Empty Fruit Bunches (EFB) Fibres

The aim of the study was to investigate the effect of pre-treatments by using sodium hydroxide (NaOH) and acetic acid on oil palm Empty Fruit Bunch (EFB) fibres for the production of Medium Density Fibreboard (MDF). The EFB fibres were treated with chemicals in the concentration range of 0.2%, 0.4%, 0.6% and 0.8% prior to refining. Single-homogenous layer MDF with 12 mm thickness and density of 720 kg/m3 was produced. Urea-Formaldehyde (UF) was applied at 10% loading (based on dry weight of dry fibres) as a binder. The physical properties (Water Absorption (WA) and Thickness Swelling (TS)) of the produced panels were tested according to European Standard, EN 622-5:2006. The results show that types of chemical used had greater effects than concentration on the dimensional stability of the MDF. EFB fibres treated with acetic acid produced MDF with better dimensional stability compared to the MDF NaOH treated fibres. High concentration of NaOH produced poor dimensional stability in the panels.

A METHOD TO IMPROVE DIMENSIONAL STABILITY OF PF PARTICLEBOARD

A method of alkaline pretreatment of particles was designed to produce three types of chips. The pretreatmentet of particles in 1% water solution of NaOH for 30 minutes offered a possibility of producing PF bonded particleboards with minimal irrecoverable swell and a reduction in thickness swelling. The method used in this work could be used to produce more stable PF particeboard.

STABILITY OF VISCOUS SHOCK WAVES FOR THE ONE-DIMENSIONAL COMPRESSIBLE NAVIER-STOKES EQUATIONS WITH DENSITY-DEPENDENT VISCOSITY

We study the large-time behavior toward viscous shock waves to the Cauchy problem of the one-dimensional compressible isentropic Navier-Stokes equations with density- dependent viscosity. The nonlinear stability of the viscous shock waves is shown for certain class of large initial perturbation with integral zero which can allow the initial density to have large oscillation. Our analysis relies upon the technique developed by Kanel~ and the continuation argument.

Stability and optoelectronic property of low-dimensional organic tin bromide perovskites

The toxicity and degradation of hybrid lead-halide perovskites hinder their extensive applications.It is thus of great importance to explore non-toxic alternative materials with excellent stability and optoelectronic property.We investigate the atomic structures and optoelectronic properties of non-toxic organic tin bromide perovskites(OTBP)with one/zerodimensional(1D/0D)structures by first-principles calculations.The calculated atomic structures show that the 1D/0D OTBPs are stable and the structure of inorganic octahedra in 0D is higher order than that in 1D.Moreover,the origination of exceptional purity emitting light in experiments is explained based on the calculated electronic structure.

Establishment of infinite dimensional Hamiltonian system of multilayer quasi-geostrophic flow & study on its linear stability

A multilayer flow is a stratified fluid composed of a finite number of layers with densities homogeneous within one layer but different from each other. It is an intermediate system between the single-layer barotropic model and the continuously stratified baroclinic model. Since this system can simulate the baroclinic effect simply, it is widely used to study the large-scale dynamic process in atmosphere and ocean. The present paper is concerned with the linear stability of the multilayer quasi-geostrophic flow, and the associated linear stability criteria are established. Firstly, the nonlinear model is turned into the form of a Hamiltonian system, and a basic flow is defined. But it cannot be an extreme point of the Hamiltonian function since the system is an infinite-dimensional one. Therefore, it is necessary to reconstruct a new Hamiltonian function so that the basic flow becomes an extreme point of it. Secondly, the linearized equations of disturbances in the multilayer quasi-geostrophic flow are derived by introducing infinitesimal disturbances superposed on the basic flows. Finally, the properties of the linearized system are discussed, and the linear stability criteria in the sense of Liapunov are derived under two different conditions with respect to certain norms.

NONLINEAR STABILITY OF VISCOUS SHOCK WAVES FOR ONE-DIMENSIONAL NONISENTROPIC COMPRESSIBLE NAVIER–STOKES EQUATIONS WITH A CLASS OF LARGE INITIAL PERTURBATION

We study the nonlinear stability of viscous shock waves for the Cauchy problem of one-dimensional nonisentropic compressible Navier–Stokes equations for a viscous and heat conducting ideal polytropic gas. The viscous shock waves are shown to be time asymptotically stable under large initial perturbation with no restriction on the range of the adiabatic exponent provided that the strengths of the viscous shock waves are assumed to be sufficiently small.The proofs are based on the nonlinear energy estimates and the crucial step is to obtain the positive lower and upper bounds of the density and the temperature which are uniformly in time and space.

Stability analysis and control synthesis of uncertain Roesser-type discrete-time two-dimensional systems

We study the stability analysis and control synthesis of uncertain discrete-time two-dimensional（2D） systems.The mathematical model of the discrete-time 2D system is established upon the well-known Roesser model,and the uncertainty phenomenon,which appears typically in practical environments,is modeled by a convex bounded（polytope type） uncertain domain.The stability analysis and control synthesis of uncertain discrete-time 2D systems are then developed by applying the Lyapunov stability theory.In the processes of stability analysis and control synthesis,the obtained stability/stabilzaition conditions become less conservative by applying some novel relaxed techniques.Moreover,the obtained results are formulated in the form of linear matrix inequalities,which can be easily solved via standard numerical software.Finally,numerical examples are given to demonstrate the effectiveness of the obtained results.

Exact solutions and linear stability analysis for two-dimensional Ablowitz Ladik equation

The Ablowitz-Ladik equation is a very important model in nonlinear mathematical physics. In this paper, the hyper- bolic function solitary wave solutions, the trigonometric function periodic wave solutions, and the rational wave solutions with more arbitrary parameters of two-dimensional Ablowitz-Ladik equation are derived by using the （GI/G）-expansion method, and the effects of the parameters （including the coupling constant and other parameters） on the linear stability of the exact solutions are analysed and numerically simulated.

Stability analysis of nonlinear Roesser-type two-dimensional systems via a homogenous polynomial technique

This paper is concerned with the problem of stability analysis of nonlinear Roesser-type two-dimensional （2D） systems. Firstly, the fuzzy modeling method for the usual one-dimensional （1D） systems is extended to the 2D ease so that the underlying nonlinear 2D system can be represented by the 2D Takagi Sugeno （TS） fuzzy model, which is convenient for implementing the stability analysis. Secondly, a new kind of fuzzy Lyapunov function, which is a homogeneous polynomially parameter dependent on fuzzy membership functions, is developed to conceive less conser- vative stability conditions for the TS Roesser-type 2D system. In the process of stability analysis, the obtained stability conditions approach exactness in the sense of convergence by applying some novel relaxed techniques. Moreover, the obtained result is formulated in the form of linear matrix inequalities, which can be easily solved via standard numerical software. Finally, a numerical example is also given to demonstrate the effectiveness of the proposed approach.

Further studies on stability analysis of nonlinear Roesser-type two-dimensional systems

This paper is concerned with further relaxations of the stability analysis of nonlinear Roesser-type two-dimensional （2D） systems in the Takagi-Sugeno fuzzy form. To achieve the goal, a novel slack matrix variable technique, which is homogenous polynomially parameter-dependent on the normalized fuzzy weighting functions with arbitrary degree, is developed and the algebraic properties of the normalized fuzzy weighting functions are collected into a set of augmented matrices. Consequently, more information about the normalized fuzzy weighting functions is involved and the relaxation quality of the stability analysis is significantly improved. Moreover, the obtained result is formulated in the form of linear matrix inequalities, which can be easily solved via standard numerical software. Finally, a numerical example is provided to demonstrate the effectiveness of the proposed result.

Three-dimensional critical slip surface locating and slope stability assessment for lava lobe of Unzen volcano

Even Unzen volcano has been declared to be in a state of relative dormancy,the latest formed lava lobe No.11 now represents a potential slope failure mass based on the latest research.This paper concentrates on the stability of the lava lobe No.11 and its possible critical sliding mass.It proposes geographic information systems (GIS) based three-dimensional (3D) slope stability analysis models.It uses a 3D locating approach to identify the 3D critical slip surface and to analyze the 3D stability of the lava lobe No.11.At the same time,the new 3D approach shows the effectiveness in selecting the range of the Monte Carlo random variables and locating the critical slip surface in different parts of the lava lobe No.11.The results are very valuable for judging the stability of the lava lobe and assigning the monitoring equipments.

Stability Analysis of Multi-Dimensional Linear Time Invariant Discrete Systems within the Unity Shifted Unit Circle

This technical brief proposes a new approach to multi-dimensional linear time invariant discrete systems within the unity shifted unit circle which is denoted in the form of characteristic equation. The characteristic equation of multi–dimensional linear system is modified into an equivalent one- dimensional characteristic equation. Further formation of stability in the left of the z-plane, the roots of the characteristic equation f(z) =0 should lie within the shifted unit circle. Using the coefficients of the unity shifted one dimensional equivalent characteristic equation by applying minimal shifting of coefficients either left or right and elimination of coefficient method to two triangular matrixes are formed. A single square matrix is formed by adding the two triangular matrices. This matrix is used for testing the sufficient condition by proposed Jury’s inner determinant concept. Further one more indispensable condition is suggested to show the applicability of the proposed scheme. The proposed method of construction of square matrix consumes less arithmetic operation like shifting and eliminating of coefficients when compare to the construction of square matrix by Jury’s and Hurwitz matrix method.