High-performance imidazole-containing polymers for applications in high temperature polymer electrolyte membrane fuel cells

This work focuses on the development of high temperature polymer electrolyte membranes(HT-PEMs)as key materials for HT-PEM fuel cells(HT-PEMFCs).Recognizing the challenges associated with the phosphoric acid(PA) doped polybenzimidazole(PBI) membranes,including the use of carcinogenic monomers and complex synthesis procedures,this study aims to develop more cost-effective,readily synthesized,and high-performance alternatives.A series of superacid-catalyzed polyhydroxyalkylation reactions have been carefully designed between p-terphenyl and aldehydes bearing imidazole moieties,resulting in a new class of HT-PEMs.It is found that the chemical structure of aldehyde-substituted N-heterocycles significantly impacts the polymerization reaction.Specifically,the use of 1-methyl-2-imidazole-formaldehyde and 1 H-imidazole-4-formaldehyde monomers leads to the formation of high-viscosity,rigid,and ether-free polymers,denoted as PTIm-a and PTIm-b.Membranes fabricated from these polymers,due to their pendent imidazole groups,exhibit an exceptional capacity for PA absorption.Notably,PTIm-a,carrying methylimidazole moieties,demonstrates a superior chemical stability by maintaining morphology and structural stability during 350 h of Fenton testing.After being immersed in 75 wt% PA at 40℃,the PTIm-a membrane reaches a PA content of 152%,maintains a good tensile strength of 13.6 MPa,and exhibits a moderate conductivity of 50.2 mS cm^(-1) at 180℃.Under H_(2)/O_(2) operational conditions,a single cell based on the PTIm-a membrane attains a peak power density of 732 mW cm^(-2) at 180℃ without backpressure.Furthermore,the membrane demonstrates stable cycle stability over 173 h within 18 days at a current density of 200 mA cm^(-2),indicating its potential for practical application in HT-PEMFCs.This work highlights innovative strategies for the synthesis of advanced HT-PEMs,offering significant improvements in membrane properties and fuel cell performance,thus expanding the horizons of HT-PEMFC technology.

High-performance and robust high-temperature polymer electrolyte membranes with moderate microphase separation by implementation of terphenyl-based polymers

Acid loss and plasticization of phosphoric acid(PA)-doped high-temperature polymer electrolyte membranes(HT-PEMs)are critical limitations to their practical application in fuel cells.To overcome these barriers,poly(terphenyl piperidinium)s constructed from the m-and p-isomers of terphenyl were synthesized to regulate the microstructure of the membrane.Highly rigid p-terphenyl units prompt the formation of moderate PA aggregates,where the ion-pair interaction between piperidinium and biphosphate is reinforced,leading to a reduction in the plasticizing effect.As a result,there are trade-offs between the proton conductivity,mechanical strength,and PA retention of the membranes with varied m/p-isomer ratios.The designed PA-doped PTP-20m membrane exhibits superior ionic conductivity,good mechanical strength,and excellent PA retention over a wide range of temperature(80–160°C)as well as satisfactory resistance to harsh accelerated aging tests.As a result,the membrane presents a desirable combination of performance(1.462 W cm^(-2) under the H_(2)/O_(2)condition,which is 1.5 times higher than that of PBI-based membrane)and durability(300 h at 160°C and 0.2 A cm^(-2))in the fuel cell.The results of this study provide new insights that will guide molecular design from the perspective of microstructure to improve the performance and robustness of HT-PEMs.

Multi-objective optimization of the cathode catalyst layer micro-composition of polymer electrolyte membrane fuel cells using a multi-scale,two-phase fuel cell model and data-driven surrogates

Polymer electrolyte membrane fuel cells(PEMFCs)are considered a promising alternative to internal combustion engines in the automotive sector.Their commercialization is mainly hindered due to the cost and effectiveness of using platinum(Pt)in them.The cathode catalyst layer(CL)is considered a core component in PEMFCs,and its composition often considerably affects the cell performance(V_(cell))also PEMFC fabrication and production(C_(stack))costs.In this study,a data-driven multi-objective optimization analysis is conducted to effectively evaluate the effects of various cathode CL compositions on Vcelland Cstack.Four essential cathode CL parameters,i.e.,platinum loading(L_(Pt)),weight ratio of ionomer to carbon(wt_(I/C)),weight ratio of Pt to carbon(wt_(Pt/c)),and porosity of cathode CL(ε_(cCL)),are considered as the design variables.The simulation results of a three-dimensional,multi-scale,two-phase comprehensive PEMFC model are used to train and test two famous surrogates:multi-layer perceptron(MLP)and response surface analysis(RSA).Their accuracies are verified using root mean square error and adjusted R^(2).MLP which outperforms RSA in terms of prediction capability is then linked to a multi-objective non-dominated sorting genetic algorithmⅡ.Compared to a typical PEMFC stack,the results of the optimal study show that the single-cell voltage,Vcellis improved by 28 m V for the same stack price and the stack cost evaluated through the U.S department of energy cost model is reduced by$5.86/k W for the same stack performance.

Effects of Freeze/Thaw Cycles and Gas Purging Method on Polymer Electrolyte Membrane Fuel Cells

At subzero temperature, the startup capability and performance of polymer electrolyte membrane fuel cell (PEMFC) deteriorates markedly. The object of this work is to study the degradation mechanism of key components of PEMFC-membrane-electrode assembly (MEA) and seek feasible measures to avoid degradation. The effect of freeze/thaw cycles on the structure of MEA is investigated based on porosity and SEM measurement. The performance of a single cell was also tested before and after repetitious freeze/thaw cycles. The experimental results indicated that the performance of a PEMFC decreased along with the total operating time as well as the pore size distribution shifting and micro configuration changing. However, when the redundant water had been removed by gas purging, the performance of the PEMFC stack was almost resumed when it experienced again the same subzero temperature test. These results show that it is necessary to remove the water in PEMFCs to maintain stable performance under subzero temperature and gas purging is proved to be the effective operation.

Recent developments in electrocatalysts and future prospects for oxygen reduction reaction in polymer electrolyte membrane fuel cells

The main difficulty in the extensive commercial use of polymer electrolyte membrane fuel cells （PEMFCs） is the use of noble metals such as Pt-based electrocatalyst at the cathode, which is essential to ease the oxygen reduction reaction （ORR） in fuel cells （FCs）. To eliminate the high loading of Pt-based electrocatalysts to minimize the cost, extensive study has been carried out over the previous decades on the non-noble metal catalysts. Development in enhancing the ORR performance of FCs is mainly due to the doped carbon materials, Fe and Co-based electrocatalysts, these materials could be considered as probable substitutes for Pt-based catalysts. But the stability of these non-noble metal electrocatalysts is low and the durability of these metals remains unclear. The three basic reasons of instability are： （i） oxidative occurrence by H2O2, （ii） leakage of the metal site and （iii） protonation by probable anion adsorption of the active site. Whereas leakage of the metal site has been almost solved, more work is required to understand and avoid losses from oxidative attack and protonation. The ORR performance such as stability tests are usually run at low current densities and the lifetime is much shorter than desired need. Therefore, improvement in the ORR activity and stability afe the key issues of the non-noble metal electrocatalyst. Based on the consequences obtained in this area, numerous future research directions are projected and discussed in this paper. Hence, this review is focused on improvement of stability and durability of the non-noble metal electrocatalyst.

Polymer Electrolyte Membrane Fuel Cells (PEMFC) in Automotive Applications: Environmental Relevance of the Manufacturing Stage

This study presents a state of the art of several studies dealing with the environmental impact assessment of fuel cell (FC) vehicles and the comparison with their conventional fossil-fuelled counterparts, by means of the Life Cycle As-sessment (LCA) methodology. Results declare that, depending on the systems characteristics, there are numerous envi-ronmental advantages, but also some disadvantages can be expected. In addition, the significance of the manufac-turing process of the FC, more specifically the Polymer Electrolyte Membrane Fuel Cell (PEMFC) type, in terms of environmental impact is presented. Finally, CIEMAT’s role in HYCHAIN European project, consisting of supporting early adopters for hydrogen FCs in the transport sector, is

Effects of Freeze/Thaw Cycles and Gas Purging Method on Polymer Electrolyte Membrane Fuel Cells

At subzero temperature, the startup capability and performance of polymer electrolyte membrane fuel cell PEMFC deteriorates markedly. The object of this work is to study the degradation mechanism of key compo- nents of PEMFC—membrane-electrode assembly MEA and seek feasible measures to avoid degradation. The ef- fect of freezethaw cycles on the structure of MEA is investigated based on porosity and SEM measurement. The performance of a single cell was also tested before and after repetitious freezethaw cycles. The experimental results indicated that the performance of a PEMFC decreased along with the total operating time as well as the pore size distribution shifting and micro configuration changing. However, when the redundant water had been removed by gas purging, the performance of the PEMFC stack was almost resumed when it experienced again the same subzero temperature test. These results show that it is necessary to remove the water in PEMFCs to maintain stable per- formance under subzero temperature and gas purging is proved to be the effective operation.

Water-induced electrode poisoning and the mitigation strategy for high temperature polymer electrolyte membrane fuel cells

Engineering failure of membrane electrode assembly caused by increasingly fuel poisoning in the high temperature polymer electrolyte membrane fuel cells fed with humidified reformate gases is firstly demonstrated herein this work. Based on the results of the in-situ environmental scanning electron microscope, electrochemical analyses, and limiting current method, a water-induced phosphoric acid invasion model is constructed in the porous electrode to elucidate the failure causations of the hindered hydrogen mass transport and the enhanced carbon monoxide poisoning. To optimize the phosphoric acid distribution under the inevitably humidified circumstance, a facile and effective strategy of constructing acid-proofed electrode is proposed and demonstrates outstanding stability with highly humidified reformate gases as anode fuel. This work discusses a potential defect that was rarely studied previously under practical working circumstance for high temperature polymer electrolyte membrane fuel cells, providing an alternative opinion of electrode design based on the fundamental aspects towards the engineering problems.

High temperature polymer electrolyte membrane fuel cell

One of the majorissuesli mitingtheintroduction of polymer electrolyte membranefuel cells(PEMFCs) is thelowtemperature ofoperation which makes platinum-based anode catalysts susceptible to poisoning by the trace amount of CO,inevitably present in reformedfuel.In order to alleviate the problemof COpoisoning andi mprove the power density of the cell,operating at temperature above 100 ℃ispreferred.Nafion-type perfluorosulfonated polymers have been typically used for PEMFC.However,the conductivity of Nafion-typepolymers is not high enoughto be usedfor fuel cell operations at higher temperature(>90 ℃) and atmospheric pressure because they dehy-drate under these condition.An additional problem which faces the introduction of PEMFCtechnology is that of supplying or storing hydrogen for cell operation,especially for vehicular applications.Consequently the use of alternative fuels such as methanol and ethanol is of interest,especially if thiscan be used directlyinthe fuel cell,without reformationto hydrogen.Ali mitation of the direct use of alcohol is thelower activity of oxida-tionin comparison to hydrogen,which means that power densities are considerably lower.Hence to i mprove activity and power outputhigher temperatures of operation are preferable.To achieve this goal,requires a newpolymer electrolyte membrane which exhibits stabilityand high conductivityin the absence of liquid water.Experi mental data on a polybenzi midazole based PEMFC were presented.Asi mple steady-stateisothermal model of the fuel cell is alsoused to aidin fuel cell performance opti misation.The governing equations involve the coupling of kinetic,ohmic and mass transport.Thispaper also considers the advances madeinthe performance of direct methanol and solid polymer electrolyte fuel cells and considers theirli mi-tations in relation to the source and type of fuels to be used.

A comprehensive review of the modeling of transport phenomenon in the flow channels of polymer electrolyte membrane fuel cells

Reactant gas and liquid water transport phenomena in the flow channels are complex and critical to the performance and durability of polymer electrolyte membrane fuel cells.The polymer membrane needs water at an optimum level for proton conductivity.Water management involves the prevention of dehydration,waterlogging,and the cell’s subsequent performance decline and degradation.This process requires the study and understanding of internal two-phase flows.Different experimental visualization techniques are used to study two-phase flows in polymer electrolyte membrane fuel cells.However,the experiments have limitations in in situ measurements;they are also expensive and time exhaustive.In contrast,numerical modeling is cheaper and faster,providing insights into the complex multiscale processes occurring across the components of the polymer electrolyte membrane fuel cells.This paper introduces the recent design of flow channels.It reviews the numerical modeling techniques adopted for the transport phenomena therein:the two-fluid,multiphase mixture,volume of fluid,lattice Boltzmann,and pressure drop models.Furthermore,this work describes,compares,and analyses the models’approaches and reviews the representative results of some selected aspects.Finally,the paper summarizes the modeling perspectives,emphasizing future directions with some recommendations.

Phosphorus induced activity-enhancement of Fe-N-C catalysts for high temperature polymer electrolyte membrane fuel cells

Fe-N-C materials with atomically dispersed Fe–N_(4) sites could tolerate the poisoning of phosphate,is regarded as the most promising alternative to costly Pt-based catalysts for the oxygen reduction in high temperature polymer electrolyte membrane fuel cells(HT-PEMFCs).However,they still face the critical issue of insufficient activity in phosphoric acid.Herein,we demonstrate a P-doping strategy to increase the activity of Fe-N-C catalyst via a feasible one-pot method.X-ray absorption spectroscopy and electron microscopy with atomic resolution indicated that the P atom is bonded with the N in Fe–N_(4) site through C atoms.The as prepared Fe-NCP catalyst shows a half-wave potential of 0.75 V(vs.reversible hydrogen electrode(RHE),0.1 M H_(3)PO_(4)),which is 60 and 40 mV higher than that of Fe-NC and commercial Pt/C catalysts,respectively.More importantly,the Fe-NCP catalyst could deliver a peak power density of 357 mW·cm^(−2)in a high temperature fuel cell(160℃),exceeding the non-noble-metal catalysts ever reported.The enhancement of activity is attributed to the increasing charge density and poisoning tolerance of Fe–N_(4) caused by neighboring P.This work not only promotes the practical application of Fe-N-C materials in HT-PEMFCs,but also provides a feasible P-doping method for regulating the structure of single atom site.

Water spatial distribution in polymer electrolyte membrane fuel cell: Convolutional neural network analysis of neutron radiography

Polymer electrolyte membrane(PEM)fuel cells produce water as byproduct,which may cause electrode“flooding”and reduce cell performance.In operation,water usually builds up downstream in the gas flow channel due to the water production by the oxygen reduction reaction(ORR),leading to a water spatial dis-tribution.In this study,a convolutional neural network(CNN)is presented to analyze neutron radiography images to obtain water spatial variation under various operating conditions.5 and 10 segments of a fuel cell are analyzed for spatial variations.Image pre-processing treatments are carried out to improve the convolutional neural network accuracy to 96.6%.The results show that liquid water emerges at a position around 55%downstream for 50%relative humidity while the entire cell is subject to two-phase flow for 100%relative hu-midity under a co-flow configuration.Large water content is present in most of the segments and the near-outlet segment for the counter-flow and co-flow configurations,respectively.In addition,the quad-serpentine cell exhibits more water accumulation than the single serpentine one in most downstream segments.The convolu-tional neural network results agree well with the data obtained from a pixelation image processing method with an accuracy of 91.8%.Compared with conventional pixelation methods,the convolutional neural network method performs better in speed for high-resolution images.It also shows that the current CNN tool fails to predict local water for small spatial scales,such as 10 segments,which leads to a large error(>27%)in prediction.

Graphene-based bipolar plates for polymer electrolyte membrane fuel cells

Bipolar plates(BPs)are a major component of polymer electrolyte membrane fuel cells(PEMFCs).BPs play a multifunctional character within a PEMFC stack.It is one of the most costly and critical part of the fuel cell,and hence the development of efficient and cost-effective BPs is of much interest for the fabrication of next-generation PEMFCs in future.Owing to high electrical conductivity and chemical inertness,graphene is an ideal candidate to be utilized in BPs.This paper reviews recent advances in the area of graphene-based BPs for PEMFC applications.Various aspects including the momentous functions of BPs in the PEMFC,favorable features of graphene.based BPs,performance evaluation of various reported BPs with their advantages and disadvantages,challenges at commercial level products and future prospects of frontier research in this direction are extensively documented.

Multifunctional Ir–Ru alloy catalysts for reversal-tolerant anodes of polymer electrolyte membrane fuel cells

To address the problem of fuel starvation in fuel-cell electric vehicles,which causes cell voltage reversal and results in cell failure when repeated continuously,we developed a reversal-tolerant anode(RTA) to promote water oxidation in preference to carbon corrosion.Graphitized carbon-supported Ir-Ru alloys with different compositions are employed as RTA catalysts in an acidic polyol solution and are shown to exhibit composition-dependent average crystallite sizes of <5.33 nm.The adopted approach allows the generation of relatively well-dispersed Ir-Ru alloy nanoparticles on the carbon support without severe agglomeration.The activity of IrRu_(2)/C for the hydrogen oxidation reaction is 1.10 times that of the stateof-the-art Pt/C catalyst.Cell reversal testing by simulation of fuel starvation reveals that the durability of IrRu_(2)/C(~7 h) significantly exceeds that of the conventional Pt/C catalyst(~10 min) and is the highest value reported so far.Thus,the developed Ir-Ru alloy catalyst can be used to fabricate practical RTAs and replace Pt catalysts in the anodes of polymer electrolyte membrane fuel cells.

A Review of physics-based and data-driven models for real-time control of polymer electrolyte membrane fuel cells

The real-time model-based control of polymer electrolyte membrane(PEM)fuel cells requires a computationally efficient and sufficiently accurate model to predict the transient and long-term performance under various operational conditions,involving the pressure,temperature,humidity,and stoichiometry ratio.In this article,recent progress on the development of PEM fuel cell models that can be used for real-time control is reviewed.The major operational principles of PEM fuel cells and the associated mathematical description of the transport and electrochemical phenomena are described.The reduced-dimensional physics-based models(pseudo-twodimensional,one-dimensional numerical and zero dimensional analytical models)and the non-physics-based models(zero-dimensional empirical and data-driven models)have been systematically examined,and the comparison of these models has been performed.It is found that the current trends for the real-time control models are(i)to couple the single cell model with balance of plants to investigate the system performance,(ii)to incorporate aging effects to enable long-term performance prediction,(iii)to increase the computational speed(especially for one-dimensional numerical models),and(iv)to develop data-driven models with artificial intelligence/machine learning algorithms.This review will be beneficial for the development of physics or nonphysics based models with sufficient accuracy and computational speed to ensure the real-time control of PEM fuel cells.

Fabrication of Pt deposited on carbon nanotubes and performance of its polymer electrolyte membrane fuel cells

A new method of depositing nano-sized Pt particles on the surface of the carbon nano-tubes was introduced, and the performance of Pt/carbon nanotube compound on polymer electrolyte membrane fuel cells was measured. The experimental results show that the fine platinum particles (about 3 nm) were well dispersed on carbon nanotubes, which demonstrates the excellent catalytic properties of the Pt/CNTs compound in polymer electrolyte membrane fuel cells.

Single-atom Catalysts for Polymer Electrolyte Membrane Fuel Cells

Searching for high-activity,stabilily and highly casbellective electrocalalysts for acid oxygen reaction rolutioo(ORR)has always been a urgent problem in polymer ectrolyte menbrane fuel ells(PEMFC).Nonetheless,the electrochemical poperties of various systems have their intrinsic limits and tremendous eforts have been paid oul to search for highly eficient electocatalysts by more raional control over the size,morphology,compoition,and structure.In particular,single-atom catalysts(SACs)have atrascted extensive intenest due to theirs cxcellant activity,stability,slctivity and the highest metal tiliztion In rceat yeurs,the number of papers in the field of SACs has incressed rapidly,indicating that SACs have made great progress.This review foouses on SACs electo-echemical applications in the acid ORR and introduces immovative syntheses,fiuel cell performance and long-time durabilily.

Water Transport Analysis in Polymer Electrolyte Membrane Fuel Cells by Magnetic Resonance Imaging

1 Results Polymer electrolyte fuel cells (PEFCs) have beenintensively developedfor future vehicle applications andon-site power generation owing to its high energy efficiency and high power density.In PEFCs ,appropriatewater management to maintain polymer electrolyte membrane (PEM) hydratedis of great i mportance ,becausethe ion conductivity of membraneislower at lower water content .Consequently,it is of great interest to watercontent and water transport process in PEMs during fuel cell operation.

Anode Catalytic Dependency Behavior on Ionomer Content in Direct CO Polymer Electrolyte Membrane Fuel Cell

In this work,the effect of Nafion ionomer content on the structure and catalytic performance of direct CO polymer electrolyte membrane fuel cell(CO-PEMFC)by using Rh-N-C single-atom catalyst as the anode catalyst layers was studied.The ionic plaque and roughness of the anode catalyst layers increase with the increase of Nafion ionomer content.Furthermore,the contact angle measurement results show that the hydrophilicity of the anode catalyst layers also increases with the increase of Nafion ionomer content.However,when the Nafion ionomer content is too low,the binding between microporous layers,catalyst layers and membrane cannot meet the requirement for either electric conductivity or mass transfer.While Nafion ionomer content increased above 30%,the content of water in anode is difficult to control.Therefore,it was found that AN 30(30%Nafion ionomer content of anode)is the best level to effectively extend the three-phase boundary and improve CO-PEMFCs performance.

Alkaline polymer electrolyte fuel cells: Principle, challenges, and recent progress

Polymer electrolyte membrane fuel cells (PEMFC) have been recognized as a significant power source in future energy systems based on hydrogen. The current PEMFC technology features the employment of acidic polymer electrolytes which, albeit superior to electrolyte solutions, have intrinsically limited the catalysts to noble metals, fundamentally preventing PEMFC from widespread deployment. An effective solution to this problem is to develop fuel cells based on alkaline polymer electrolytes (APEFC), which not only enable the use of non-precious metal catalysts but also avoid the carbonate-precipitate issue which has been troubling the conventional alkaline fuel cells (AFC). This feature article introduces the principle of APEFC, the challenges, and our research progress, and focuses on strategies for developing key materials, including high-performance alkaline polyelectrolytes and stable non-precious metal catalysts. For alkaline polymer electrolytes, high ionic conductivity and satisfactory mechanical property are difficult to be balanced, therefore polymer cross-linking is an ultimate strategy. For non-precious metal catalysts, it is urgent to improve the catalytic activity and stability. New materials, such as transition-metal complexes, nitrogen-doped carbon nanotubes, and metal carbides, would become applicable in APEFC.