Silica nanosheets(SN)derived from natural vermiculite(Verm)were successfully incorporated into polyethersulfone-polyvinylpyrrolidone(PES-PVP)polymer to fabricate high-temperature proton exchange membranes(HT-PEMs).The...Silica nanosheets(SN)derived from natural vermiculite(Verm)were successfully incorporated into polyethersulfone-polyvinylpyrrolidone(PES-PVP)polymer to fabricate high-temperature proton exchange membranes(HT-PEMs).The content of SN filler was varied(0.1-0.75 wt%)to study its influence on proton conductivity,power density and durability.Benefiting from the hydroxyl groups of SN that enable the formation of additional proton-transferring pathways,the inorganic-organic membrane displayed enhanced proton conductivity of 48.2 mS/cm and power density of 495 mW/cm^(2) at 150℃ without humidification when the content of SN is 0.25 wt%.Furthermore,exfoliated SN(E-SN)and sulfonated SN(S-SN),which were fabricated by a liquid-phase exfoliation method and silane condensation,respectively,were embedded in PES-PVP polymer matrix by a simple blending method.Due to the significant contribution from sulfonic groups in S-SN,the membrane with 0.25 wt%S-SN reached the highest proton conductivity of51.5 mS/cm and peak power density of 546 mW/cm^(2) at150℃,48%higher than the pristine PES-PVP membranes.Compared to unaltered PES-PVP membrane,SN added hybrid composite membrane demonstrated excellent durability for the fuel cell at 150℃.Using a facile method to prepare 2D SN from natural clay minerals,the strategy of exfoliation and functionalization of SN can be potentially used in the production of HT-PEMs.展开更多
High-temperature proton exchange membrane fuel cells(HT-PEMFCs)are pursued worldwide as efficient energy conversion devices.Great efforts have been made in the area of designing and developing phosphoric acid(PA)-base...High-temperature proton exchange membrane fuel cells(HT-PEMFCs)are pursued worldwide as efficient energy conversion devices.Great efforts have been made in the area of designing and developing phosphoric acid(PA)-based proton exchange membrane(PEM)of HT-PEMFCs.This review focuses on recent advances in the limitations of acid-based PEM(acid leaching,oxidative degradation,and mechanical degradation)and the approaches mitigating the membrane degradation.Preparing multilayer or polymers with continuous network,adding hygroscopic inorganic materials,and introducing PA doping sites or covalent interactions with PA can effectively reduce acid leaching.Membrane oxidative degradation can be alleviated by synthesizing crosslinked or branched polymers,and introducing antioxidative groups or highly oxidative stable materials.Crosslinking to get a compact structure,blending with stable polymers and inorganic materials,preparing polymer with high molecular weight,and fabricating the polymer with PA doping sites away from backbones,are recommended to improve the membrane mechanical strength.Also,by comparing the running hours and decay rate,three current approaches,1.crosslinking via thermally curing or polymeric crosslinker,2.incorporating hygroscopic inorganic materials,3.increasing membrane layers or introducing strong basic groups and electron-withdrawing groups,have been concluded to be promising approaches to improve the durability of HT-PEMFCs.The overall aim of this review is to explore the existing degradation challenges and opportunities to serve as a solid basis for the deployment in the fuel cell market.展开更多
In this study,nitrogen doped electrochemically exfoliated reduced graphene oxide and carbon black supported platinum(Pt/Nr EGO_(2)-CB_(3))has been prepared to enhance the performance and durability of hightemperature ...In this study,nitrogen doped electrochemically exfoliated reduced graphene oxide and carbon black supported platinum(Pt/Nr EGO_(2)-CB_(3))has been prepared to enhance the performance and durability of hightemperature PEMFCs with lower Pt loading.On the one hand,Pt/Nr EGO_(2)-CB_(3)with the strong interaction between the Pt and nitrogen(N)prevent agglomeration of Pt particles and Pt particles is 5.46±1.46 nm,which is smaller than that of 6.78±1.34 nm in Pt/C.Meanwhile,ECSA of Pt/Nr EGO_(2)-CB_(3)decrease 13.65%after AST,which is much lower than that of 97.99%in Pt/C.On the other hand,the Nr EGO flakes in MEAac act as a barrier to mitigate phosphoric acid redistribution,which improves the formation of triple-phase boundaries(TPBs)and gives stable operation of the MEAacwith a lower decay rate of 0.02 mV h^(-1)within100 h.After steady-state operation,the maximum power density of Pt/Nr EGO_(2)-CB_(3)(0.411 W cm^(-2))is three times higher than that of conventional Pt/C(0.134 W cm^(-2))in high-temperature PEMFCs.After AST,the mass transfer resistance of Pt/Nr EGO_(2)-CB_(3)electrode(0.560Ωcm^(2))is lower than that in Pt/C(0.728Ωcm^(2)).展开更多
PrBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(PrBSCF) has attracted much research interest as a potential triple ionic and electronic conductor(TIEC) electrode for protonic ceramic fuel cells(PCFCs). The chemical formula...PrBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(PrBSCF) has attracted much research interest as a potential triple ionic and electronic conductor(TIEC) electrode for protonic ceramic fuel cells(PCFCs). The chemical formula for Pr BSCF is AA'B_(2)O_(5+δ), with Pr(A-site) and Ba/Sr(A'-site) alternately stacked along the c-axis. Due to these structural features, the bulk oxygen ion diffusivity is significantly enhanced through the disorder-free channels in the PrO layer;thus, the A site cations(lanthanide ions) play a pivotal role in determining the overall electrochemical properties of layered perovskites. Consequently, previous research has predominantly focused on the electrical properties and oxygen bulk/surface kinetics of Ln cation effects,whereas the hydration properties for PCFC systems remain unidentified. Here, we thoroughly examined the proton uptake behavior and thermodynamic parameters for the hydration reaction to conclusively determine the changes in the electrochemical performances depending on LnBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(LnBSCF,Ln=Pr, Nd, and Gd) cathodes. At 500 ℃, the quantitative proton concentration of PrBSCF was 2.04 mol% and progressively decreased as the Ln cation size decreased. Similarly, the Gibbs free energy indicated that less energy was required for the formation of protonic defects in the order of Pr BSCF < Nd BSCF < Gd BSCF. To elucidate the close relationship between hydration properties and electrochemical performances in LnBSCF cathodes, PCFC single cell measurements and analysis of the distribution of relaxation time were further investigated.展开更多
BaZr1-xScxO3-0.5x (x=0.07,0.10,0.13,0.16) powders were prepared by solid-state reaction method,and ZnO was used as sintering aid.Samples with different amount of ZnO additive were sintered at 1450·C for 6 h in ai...BaZr1-xScxO3-0.5x (x=0.07,0.10,0.13,0.16) powders were prepared by solid-state reaction method,and ZnO was used as sintering aid.Samples with different amount of ZnO additive were sintered at 1450·C for 6 h in air.Single cubic perovskite phase proton conductors were obtained.Conductivity was measured by electrochemical workstation.It was shown that Sc doping could increase conductivity through enhancing the carrier concentration in the material,but excessive Sc content might decrease the carrier concentration because of its charge compensation.ZnO had an influence on carrier concentration and mobility and affected the electrical conductivity.2 mol% ZnO and 13 mol% ScO1.5 doped sample showed the highest DC conductivity of 3.6×10-3 S·cm-1 tested at 800·C in wet hydrogen atmosphere.展开更多
Two types of disposable EMF hydrogen sensors for measurements ofsolute contents of liquid metals in situ in metal-refining processesand their general principles are introduced. The way to design newelectrochemical sen...Two types of disposable EMF hydrogen sensors for measurements ofsolute contents of liquid metals in situ in metal-refining processesand their general principles are introduced. The way to design newelectrochemical sensors and the direction to develop new protonicconductors as new electrochemical sensors are discussed. Thefeasibility of protonic conductors worked as hydrogen pump innon-ferrous metal refining processes is discussed as well.展开更多
A battery drivable low-voltage transparent lightly antimony（Sb）-doped SnO2 nanowire electric-double-layer （EDL） field-effect transistor （FET） is fabricated on an ITO glass substrate at room temperature. An ultra...A battery drivable low-voltage transparent lightly antimony（Sb）-doped SnO2 nanowire electric-double-layer （EDL） field-effect transistor （FET） is fabricated on an ITO glass substrate at room temperature. An ultralow operation voltage of 1 V is obtained on account of an untralarge specific gate capacitance （- 2.14 μF/cm2） directly bound up with mobile ions-induced EDL （sandwiched between the top and bottom electrodes） effect. The transparent FET shows excellent electric characteristics with a field-effect mobility of 54.43 cm2/V. s, current on/off ration of 2 × 104, and subthreshold gate voltage swing （S = dVgs/d（logIds）） of 140 mV/decade. The threshold voltage Yth （0.1 V） is estimated which indicates that the SnO2 namowire transistor operates in an n-type enhanced mode. Such a low-voltage transparent nanowire transistor gated by a microporous SiO2-based solid electrolyte is very promising for battery-powered portable nanoscale sensors.展开更多
Hybrid proton conducting membranes of poly（vinyl alcohol） （PVA） and phosphomolybdic acid （PMA） were prepared by solution casting method. The effect of PMA doping and PVA crosslinking density on the membrane prop...Hybrid proton conducting membranes of poly（vinyl alcohol） （PVA） and phosphomolybdic acid （PMA） were prepared by solution casting method. The effect of PMA doping and PVA crosslinking density on the membrane properties and proton conductivity were investigated. The crosslinking reaction between the hydroxyl group of PVA and the aldehyde group of glutaraldehyde （GA） was characterized by IR spectroscopy. Proton conductivity of the membranes increases with an increase in concentration of the doped PMA and also with an increase in crosslinking density of the membranes. Proton conductivity results indicate that a significant amount of PMA was maintained in the membranes even after several hours of immersion in water. A maximum conductivity of 0.0101 S cm^-1 was obtained for the membrane with 33.3 wt% PMA and crosslinking density of 5.825 mol%. X-ray diffraction studies were carried out to investigate the influence of PMA doping and crosslinking density on the nature of the membranes. These properties make them very good candidates for polymer electrolyte membranes for direct methanol fuel cell application.展开更多
We have fabricated the fuel cell based on the tissue derived biomaterial “collagen” and investigated its proton transfer. It was found that “collagen” becomes the electrolyte of fuel cell in the humidified conditi...We have fabricated the fuel cell based on the tissue derived biomaterial “collagen” and investigated its proton transfer. It was found that “collagen” becomes the electrolyte of fuel cell in the humidified condition. The power density of the fuel cell becomes typically 8.6 W/m2 in the 80% humidity. Further, these results indicate that collagen exhibits proton conductivity in the humidified condition. Both of proton conductivity and dielectric constant increase by the increase of humidity. From the analyses of the frequency dependence of AC conductivity, it was found that proton conductivity and the dielectric dispersion observed in the humidified condition are caused by the formation of the water bridge, which is bonded with the collagen peptide chain. Considering that hydration induces the formation of the water bridge and that increases proton conductivity and dielectric constant, it is deduced that proton transfer in the fuel cell based on collagen is caused by the breaking and rearrangement of hydrogen bond in the water bridge.展开更多
Heterogeneous composite BaZr0.9Y0.1O2.95/Na2SO4 was designed and fabricated with Y-doped BaZrO3 as matrix and Na2SO4 as dispersant by conventional powder processing to improve the total conductivity of barium zirconat...Heterogeneous composite BaZr0.9Y0.1O2.95/Na2SO4 was designed and fabricated with Y-doped BaZrO3 as matrix and Na2SO4 as dispersant by conventional powder processing to improve the total conductivity of barium zirconate. The electrical conduction of the composite was studied by electrical and electrochemical methods. Microstructure of the heterogeneous composite was examined by SEM. The experimewtal results show that the protonic conductivity of Y-doped BaZrO3 is greatly improved upon incorporating Na2SO4 in the material. Microstructure observation indicates that a multiphase structure with Na2SO4 disperses at the grain boundaries of BaZr0.1Y0.9O2.95. Electromotive force （EMF） measurements under fuel cell conditions reveal that the total ionic transport number of the composite is more than 0.9 at 750 ℃.展开更多
In order to investigate a key factor for the appearance of proton conductivity in chitin-chitosan mixed compounds, the chitin-chitosan mixed compounds (chitin)x(chitosan)1-x were prepared and these proton conductiviti...In order to investigate a key factor for the appearance of proton conductivity in chitin-chitosan mixed compounds, the chitin-chitosan mixed compounds (chitin)x(chitosan)1-x were prepared and these proton conductivities have been investigated. DC proton conductivity σ is obtained from Nyquist plot of impedance measurement data, and the relationship between σ and mixing ratio x has been made clear. It was found that the x dependence of σ is non-monotonous. That is, σ shows the anomalous behavior, and has peaks around x = 0.4 and 0.75. This result indicates that there exist optimal conditions for the realization of high-proton conductivity in the chitin-chitosan mixed compound in which the number of acetyl groups is different. From the FT-IR measurement, we have found that the behavior of proton conductivity in (chitin)x(chitosan)1-x is determined by the amount of water content changed by x. Using these results, proton conductivity, which is important for the application of conducting polymers in chitin-chitosan mixed compounds, will be able to be easily controlled by adjusting the mixing ratio x.展开更多
We have fabricated a fuel cell based on the tissue-derived biomaterial “chitin”, and investigated its proton conductivity. It was found that chitin becomes the electrolyte of the fuel cell in the humidified conditio...We have fabricated a fuel cell based on the tissue-derived biomaterial “chitin”, and investigated its proton conductivity. It was found that chitin becomes the electrolyte of the fuel cell in the humidified condition, and power density of the fuel cell using chitin electrolyte becomes typically 1.35 mW/cm2 at the 100% relative humidity. This result is the first result showing that the polysaccharide obtained from nature becomes the fuel cell electrolyte. Moreover, this result indicates that chitin is proton conductor in the humidified condition. In the chitin sheet plane, proton conductivity in chitin is observed approximately 0.1 S/m. Further, it was also found that chitin has the anisotropic proton conductivity. The proton conductivity along the chitin fiber direction is higher than that perpendicular to the chitin fiber direction. From these results, it is deduced that the formation of water bridges accompanied by hydration plays an important role in the appearance of proton conductivity in chitin.展开更多
High-temperature proton exchange membrane(HT-PEM)fuel cells offer more advantages than low-temperature PEM fuel cells.The ideal characteristics of HT-PEMs are high conductivities,low-humidity operation conditions,adeq...High-temperature proton exchange membrane(HT-PEM)fuel cells offer more advantages than low-temperature PEM fuel cells.The ideal characteristics of HT-PEMs are high conductivities,low-humidity operation conditions,adequate mechanical properties,and competitive costs.Various molecular moieties,such as benzimidazole,benzothiazole,imide,and ether ether ketone,have been introduced to polymer chain backbones to satisfy the application requirements for HT-PEMs.The most common sulfonated polymers based on the main chain backbones have been employed to improve the rties.Side group/chain engineering,including the introduction of SO_(3)^(-) on the side chain,grafting,branching,and crosslinking,has been widely applied to HTPEMs to further improve their proton conductivity,thermal stability,and mechanical properties.Currently,phosphoric acid-doped polybenzimidazole is the most successful polymer material for application in HT-PEMs.The compositing/blending modification methods of polymers are effective in obtaining high PA-doping levels and superior mechanical properties.In this review,the current progress of various membrane materials used for HT-PEMs is summarized.The synthesis and performance characteristics of polymers containing specific moieties in the chain backbones applied to HT-PEMs are discussed systemically.Various modification approaches and their deficiencies associated with HT-PEMs are analyzed and clarified.Prospects and future challenges are also presented.展开更多
With inherent ionic priorities, mixed ion and electron conductor hybrid devices have been proposed for brain-inspired neuromorphic system applications, demonstrating interesting neuromorphic functions. Here, mixed pro...With inherent ionic priorities, mixed ion and electron conductor hybrid devices have been proposed for brain-inspired neuromorphic system applications, demonstrating interesting neuromorphic functions. Here, mixed proton and electron conductor (MPEC) hybrid oxide neuromorphic transistor is proposed by adopting aqueous solution-processed mesoporous silica coating (MSC)-based electrolyte as gate dielec- tric. With optical and electrical synergetic coupling behaviors, the device demonstrates typical synap- tic responses and transition between short-term plasticity and long-term plasticity. With unique field- configurable proton self-modulation behaviors, a pseudo-diode operation mode is demonstrated on the MPEC hybrid transistor. Moreover, the device demonstrates interesting non-associative learning, including habituation and sensitization behavior. The results show that the proposed MPEC hybrid oxide neuromor- phic transistor has great potential in the field of neuromorphic engineering and would have potential in the bionic visual perception platform .展开更多
基金the EPSRC grant EP/009050/1supported by the Henry Royce Institute for Advanced Materials which is funded by EPSRC grants EP/S019367/1,EP/P025021/1,EP/R00661X/1 and EP/P025498/1.
文摘Silica nanosheets(SN)derived from natural vermiculite(Verm)were successfully incorporated into polyethersulfone-polyvinylpyrrolidone(PES-PVP)polymer to fabricate high-temperature proton exchange membranes(HT-PEMs).The content of SN filler was varied(0.1-0.75 wt%)to study its influence on proton conductivity,power density and durability.Benefiting from the hydroxyl groups of SN that enable the formation of additional proton-transferring pathways,the inorganic-organic membrane displayed enhanced proton conductivity of 48.2 mS/cm and power density of 495 mW/cm^(2) at 150℃ without humidification when the content of SN is 0.25 wt%.Furthermore,exfoliated SN(E-SN)and sulfonated SN(S-SN),which were fabricated by a liquid-phase exfoliation method and silane condensation,respectively,were embedded in PES-PVP polymer matrix by a simple blending method.Due to the significant contribution from sulfonic groups in S-SN,the membrane with 0.25 wt%S-SN reached the highest proton conductivity of51.5 mS/cm and peak power density of 546 mW/cm^(2) at150℃,48%higher than the pristine PES-PVP membranes.Compared to unaltered PES-PVP membrane,SN added hybrid composite membrane demonstrated excellent durability for the fuel cell at 150℃.Using a facile method to prepare 2D SN from natural clay minerals,the strategy of exfoliation and functionalization of SN can be potentially used in the production of HT-PEMs.
基金funded by the UK Research Council EPSRC EP/009050/1。
文摘High-temperature proton exchange membrane fuel cells(HT-PEMFCs)are pursued worldwide as efficient energy conversion devices.Great efforts have been made in the area of designing and developing phosphoric acid(PA)-based proton exchange membrane(PEM)of HT-PEMFCs.This review focuses on recent advances in the limitations of acid-based PEM(acid leaching,oxidative degradation,and mechanical degradation)and the approaches mitigating the membrane degradation.Preparing multilayer or polymers with continuous network,adding hygroscopic inorganic materials,and introducing PA doping sites or covalent interactions with PA can effectively reduce acid leaching.Membrane oxidative degradation can be alleviated by synthesizing crosslinked or branched polymers,and introducing antioxidative groups or highly oxidative stable materials.Crosslinking to get a compact structure,blending with stable polymers and inorganic materials,preparing polymer with high molecular weight,and fabricating the polymer with PA doping sites away from backbones,are recommended to improve the membrane mechanical strength.Also,by comparing the running hours and decay rate,three current approaches,1.crosslinking via thermally curing or polymeric crosslinker,2.incorporating hygroscopic inorganic materials,3.increasing membrane layers or introducing strong basic groups and electron-withdrawing groups,have been concluded to be promising approaches to improve the durability of HT-PEMFCs.The overall aim of this review is to explore the existing degradation challenges and opportunities to serve as a solid basis for the deployment in the fuel cell market.
基金supported by the Engineering and Physical Sciences Research Council(EPSRC)(EP/P009050/1 and EP/S021531/1)Tthe Henry Royce Institute for Advanced Materials,funded through the EPSRC grants(EP/R00661X/1,EP/S019367/1,EP/P025021/1 and EP/P025498/1)。
文摘In this study,nitrogen doped electrochemically exfoliated reduced graphene oxide and carbon black supported platinum(Pt/Nr EGO_(2)-CB_(3))has been prepared to enhance the performance and durability of hightemperature PEMFCs with lower Pt loading.On the one hand,Pt/Nr EGO_(2)-CB_(3)with the strong interaction between the Pt and nitrogen(N)prevent agglomeration of Pt particles and Pt particles is 5.46±1.46 nm,which is smaller than that of 6.78±1.34 nm in Pt/C.Meanwhile,ECSA of Pt/Nr EGO_(2)-CB_(3)decrease 13.65%after AST,which is much lower than that of 97.99%in Pt/C.On the other hand,the Nr EGO flakes in MEAac act as a barrier to mitigate phosphoric acid redistribution,which improves the formation of triple-phase boundaries(TPBs)and gives stable operation of the MEAacwith a lower decay rate of 0.02 mV h^(-1)within100 h.After steady-state operation,the maximum power density of Pt/Nr EGO_(2)-CB_(3)(0.411 W cm^(-2))is three times higher than that of conventional Pt/C(0.134 W cm^(-2))in high-temperature PEMFCs.After AST,the mass transfer resistance of Pt/Nr EGO_(2)-CB_(3)electrode(0.560Ωcm^(2))is lower than that in Pt/C(0.728Ωcm^(2)).
基金supported by the National Research Foundation (NRF) grant funded by the Korea government (NRF2022R1C1C1007619, NRF-2021M3H4A1A01002921, NRF2021M3I3A1084292)supported by the KIST Institutional Program (Project No. 2E32592-23-069)。
文摘PrBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(PrBSCF) has attracted much research interest as a potential triple ionic and electronic conductor(TIEC) electrode for protonic ceramic fuel cells(PCFCs). The chemical formula for Pr BSCF is AA'B_(2)O_(5+δ), with Pr(A-site) and Ba/Sr(A'-site) alternately stacked along the c-axis. Due to these structural features, the bulk oxygen ion diffusivity is significantly enhanced through the disorder-free channels in the PrO layer;thus, the A site cations(lanthanide ions) play a pivotal role in determining the overall electrochemical properties of layered perovskites. Consequently, previous research has predominantly focused on the electrical properties and oxygen bulk/surface kinetics of Ln cation effects,whereas the hydration properties for PCFC systems remain unidentified. Here, we thoroughly examined the proton uptake behavior and thermodynamic parameters for the hydration reaction to conclusively determine the changes in the electrochemical performances depending on LnBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(LnBSCF,Ln=Pr, Nd, and Gd) cathodes. At 500 ℃, the quantitative proton concentration of PrBSCF was 2.04 mol% and progressively decreased as the Ln cation size decreased. Similarly, the Gibbs free energy indicated that less energy was required for the formation of protonic defects in the order of Pr BSCF < Nd BSCF < Gd BSCF. To elucidate the close relationship between hydration properties and electrochemical performances in LnBSCF cathodes, PCFC single cell measurements and analysis of the distribution of relaxation time were further investigated.
基金financially supported by the National Natural Science Foundation of China (No.50872090)Guizhou Province-University Scientific and Technological Cooperation Program (No.[2011]7002)
文摘BaZr1-xScxO3-0.5x (x=0.07,0.10,0.13,0.16) powders were prepared by solid-state reaction method,and ZnO was used as sintering aid.Samples with different amount of ZnO additive were sintered at 1450·C for 6 h in air.Single cubic perovskite phase proton conductors were obtained.Conductivity was measured by electrochemical workstation.It was shown that Sc doping could increase conductivity through enhancing the carrier concentration in the material,but excessive Sc content might decrease the carrier concentration because of its charge compensation.ZnO had an influence on carrier concentration and mobility and affected the electrical conductivity.2 mol% ZnO and 13 mol% ScO1.5 doped sample showed the highest DC conductivity of 3.6×10-3 S·cm-1 tested at 800·C in wet hydrogen atmosphere.
基金This project is financially Supported by the National Natural Science Foundation of China (No. 20101006)Postdoctoral Foundation of China, and Shanghai Postdoctoral Foundation
文摘Two types of disposable EMF hydrogen sensors for measurements ofsolute contents of liquid metals in situ in metal-refining processesand their general principles are introduced. The way to design newelectrochemical sensors and the direction to develop new protonicconductors as new electrochemical sensors are discussed. Thefeasibility of protonic conductors worked as hydrogen pump innon-ferrous metal refining processes is discussed as well.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10874042)
文摘A battery drivable low-voltage transparent lightly antimony（Sb）-doped SnO2 nanowire electric-double-layer （EDL） field-effect transistor （FET） is fabricated on an ITO glass substrate at room temperature. An ultralow operation voltage of 1 V is obtained on account of an untralarge specific gate capacitance （- 2.14 μF/cm2） directly bound up with mobile ions-induced EDL （sandwiched between the top and bottom electrodes） effect. The transparent FET shows excellent electric characteristics with a field-effect mobility of 54.43 cm2/V. s, current on/off ration of 2 × 104, and subthreshold gate voltage swing （S = dVgs/d（logIds）） of 140 mV/decade. The threshold voltage Yth （0.1 V） is estimated which indicates that the SnO2 namowire transistor operates in an n-type enhanced mode. Such a low-voltage transparent nanowire transistor gated by a microporous SiO2-based solid electrolyte is very promising for battery-powered portable nanoscale sensors.
文摘Hybrid proton conducting membranes of poly（vinyl alcohol） （PVA） and phosphomolybdic acid （PMA） were prepared by solution casting method. The effect of PMA doping and PVA crosslinking density on the membrane properties and proton conductivity were investigated. The crosslinking reaction between the hydroxyl group of PVA and the aldehyde group of glutaraldehyde （GA） was characterized by IR spectroscopy. Proton conductivity of the membranes increases with an increase in concentration of the doped PMA and also with an increase in crosslinking density of the membranes. Proton conductivity results indicate that a significant amount of PMA was maintained in the membranes even after several hours of immersion in water. A maximum conductivity of 0.0101 S cm^-1 was obtained for the membrane with 33.3 wt% PMA and crosslinking density of 5.825 mol%. X-ray diffraction studies were carried out to investigate the influence of PMA doping and crosslinking density on the nature of the membranes. These properties make them very good candidates for polymer electrolyte membranes for direct methanol fuel cell application.
文摘We have fabricated the fuel cell based on the tissue derived biomaterial “collagen” and investigated its proton transfer. It was found that “collagen” becomes the electrolyte of fuel cell in the humidified condition. The power density of the fuel cell becomes typically 8.6 W/m2 in the 80% humidity. Further, these results indicate that collagen exhibits proton conductivity in the humidified condition. Both of proton conductivity and dielectric constant increase by the increase of humidity. From the analyses of the frequency dependence of AC conductivity, it was found that proton conductivity and the dielectric dispersion observed in the humidified condition are caused by the formation of the water bridge, which is bonded with the collagen peptide chain. Considering that hydration induces the formation of the water bridge and that increases proton conductivity and dielectric constant, it is deduced that proton transfer in the fuel cell based on collagen is caused by the breaking and rearrangement of hydrogen bond in the water bridge.
基金Funded by the National Natural Science Foundation of China(No. 50872090)
文摘Heterogeneous composite BaZr0.9Y0.1O2.95/Na2SO4 was designed and fabricated with Y-doped BaZrO3 as matrix and Na2SO4 as dispersant by conventional powder processing to improve the total conductivity of barium zirconate. The electrical conduction of the composite was studied by electrical and electrochemical methods. Microstructure of the heterogeneous composite was examined by SEM. The experimewtal results show that the protonic conductivity of Y-doped BaZrO3 is greatly improved upon incorporating Na2SO4 in the material. Microstructure observation indicates that a multiphase structure with Na2SO4 disperses at the grain boundaries of BaZr0.1Y0.9O2.95. Electromotive force （EMF） measurements under fuel cell conditions reveal that the total ionic transport number of the composite is more than 0.9 at 750 ℃.
文摘In order to investigate a key factor for the appearance of proton conductivity in chitin-chitosan mixed compounds, the chitin-chitosan mixed compounds (chitin)x(chitosan)1-x were prepared and these proton conductivities have been investigated. DC proton conductivity σ is obtained from Nyquist plot of impedance measurement data, and the relationship between σ and mixing ratio x has been made clear. It was found that the x dependence of σ is non-monotonous. That is, σ shows the anomalous behavior, and has peaks around x = 0.4 and 0.75. This result indicates that there exist optimal conditions for the realization of high-proton conductivity in the chitin-chitosan mixed compound in which the number of acetyl groups is different. From the FT-IR measurement, we have found that the behavior of proton conductivity in (chitin)x(chitosan)1-x is determined by the amount of water content changed by x. Using these results, proton conductivity, which is important for the application of conducting polymers in chitin-chitosan mixed compounds, will be able to be easily controlled by adjusting the mixing ratio x.
文摘We have fabricated a fuel cell based on the tissue-derived biomaterial “chitin”, and investigated its proton conductivity. It was found that chitin becomes the electrolyte of the fuel cell in the humidified condition, and power density of the fuel cell using chitin electrolyte becomes typically 1.35 mW/cm2 at the 100% relative humidity. This result is the first result showing that the polysaccharide obtained from nature becomes the fuel cell electrolyte. Moreover, this result indicates that chitin is proton conductor in the humidified condition. In the chitin sheet plane, proton conductivity in chitin is observed approximately 0.1 S/m. Further, it was also found that chitin has the anisotropic proton conductivity. The proton conductivity along the chitin fiber direction is higher than that perpendicular to the chitin fiber direction. From these results, it is deduced that the formation of water bridges accompanied by hydration plays an important role in the appearance of proton conductivity in chitin.
基金supported by the National Key Research and Development Program of China(2019YFC1906602)the National Natural Science Foundation of China(U1904171)+3 种基金the Foundation for"Talent Program"the Open Fund of the State Key Laboratory of Biochemical Engineering,Institute of Process Engineering(IPE)Chinese Academy of Sciences(CAS),the Project Fund of Jiangsu Bingcheng Hydrogen Energy Technology Co.,Ltd.the Young Backbone Teachers Training Program Foundation of Henan University of Technology。
文摘High-temperature proton exchange membrane(HT-PEM)fuel cells offer more advantages than low-temperature PEM fuel cells.The ideal characteristics of HT-PEMs are high conductivities,low-humidity operation conditions,adequate mechanical properties,and competitive costs.Various molecular moieties,such as benzimidazole,benzothiazole,imide,and ether ether ketone,have been introduced to polymer chain backbones to satisfy the application requirements for HT-PEMs.The most common sulfonated polymers based on the main chain backbones have been employed to improve the rties.Side group/chain engineering,including the introduction of SO_(3)^(-) on the side chain,grafting,branching,and crosslinking,has been widely applied to HTPEMs to further improve their proton conductivity,thermal stability,and mechanical properties.Currently,phosphoric acid-doped polybenzimidazole is the most successful polymer material for application in HT-PEMs.The compositing/blending modification methods of polymers are effective in obtaining high PA-doping levels and superior mechanical properties.In this review,the current progress of various membrane materials used for HT-PEMs is summarized.The synthesis and performance characteristics of polymers containing specific moieties in the chain backbones applied to HT-PEMs are discussed systemically.Various modification approaches and their deficiencies associated with HT-PEMs are analyzed and clarified.Prospects and future challenges are also presented.
基金the National Natural Science Foun-dation of China(Nos.51972316,U22A2075)the Ningbo Key Scientific and Technological Project(No.2021Z116).
文摘With inherent ionic priorities, mixed ion and electron conductor hybrid devices have been proposed for brain-inspired neuromorphic system applications, demonstrating interesting neuromorphic functions. Here, mixed proton and electron conductor (MPEC) hybrid oxide neuromorphic transistor is proposed by adopting aqueous solution-processed mesoporous silica coating (MSC)-based electrolyte as gate dielec- tric. With optical and electrical synergetic coupling behaviors, the device demonstrates typical synap- tic responses and transition between short-term plasticity and long-term plasticity. With unique field- configurable proton self-modulation behaviors, a pseudo-diode operation mode is demonstrated on the MPEC hybrid transistor. Moreover, the device demonstrates interesting non-associative learning, including habituation and sensitization behavior. The results show that the proposed MPEC hybrid oxide neuromor- phic transistor has great potential in the field of neuromorphic engineering and would have potential in the bionic visual perception platform .
