Two packing structures with the maximum packing densities of 0.64 and 0.74 for the amorphous state and crystalline state, respectively, were numerically reproduced in the packing densification of equal spheres subject...Two packing structures with the maximum packing densities of 0.64 and 0.74 for the amorphous state and crystalline state, respectively, were numerically reproduced in the packing densification of equal spheres subjected to one- dimensional and three-dimensional vibrations using the discrete element method （DEM）, and the results were physically validated. These two packing structures were analyzed in terms of coordination number （CN）, radial distribution function （RDF）, angular distribution function （ADF）, and pore size distribution （Voronoi/Delaunay tessellation）. It is shown that CN distributions have the peak values of 7 and 12 for the amorphous state and crystalline state, respectively. RDF and ADF distributions show isolated peaks and orientation preferences for the crystalline state, indicating the long range and angle correlation among particles commonly observed in the crystalline state. Voronoi/Delaunay tessellation also shows smaller and narrower pore size distribution for the crystalline state.展开更多
Boron carbide(B_(4)C)has excellent high-temperature oxidation resistance,high hardness,low relative density,high melting point and excellent abrasive resistance,which is widely used in fields such as refractories,wear...Boron carbide(B_(4)C)has excellent high-temperature oxidation resistance,high hardness,low relative density,high melting point and excellent abrasive resistance,which is widely used in fields such as refractories,wear-resistant materials and lightweight protective materials.The research progress and application of B_(4)C materials in China and overseas in recent years were summarized.The influences of sintering processes(pressureless sintering,hot-pressing sintering,hot isostatic pressing sintering,spark plasma sintering and microwave sintering)and sintering additives(simple substances,oxides and carbides)on the B_(4)C densification were analyzed.The development of B_(4)C materials was prospected.展开更多
The nano-infiltration and transient eutectic-phase (NITE) method is one of the most attractive methods for fabrication of SiC and SiC/SiC composites. In the NITE method, preform densification is essential option for d...The nano-infiltration and transient eutectic-phase (NITE) method is one of the most attractive methods for fabrication of SiC and SiC/SiC composites. In the NITE method, preform densification is essential option for damage less near-net shaping technique. However, optimization of preform densification is insufficient yet. The objective of this study is to evaluate the effects of pressure during preform densification on SiC/SiC composites. The preform before preform densification has many pores in the inter-prepreg sheets. These pores were disappeared by preform densification. As the effects of pressure on preform, densification in the intra-fiber-bundle was improved due to increasing pressure. Flexural strength of the preforms with 1 MPa and 17 MPa indicated almost same value. The result suggested that increasing of pressure did not cause any change in fiber properties. In the effects of pressure on the composites, the composites with 17 MPa was exhibited improvement in bulk density and mechanical property, compared with that with 1 MPa.展开更多
A two-year field experiment was conducted to measure the effects of densification methods on photosynthesis and yield of densely planted wheat.Inter-plant and inter-row distances were used to define ratefixed pattern(...A two-year field experiment was conducted to measure the effects of densification methods on photosynthesis and yield of densely planted wheat.Inter-plant and inter-row distances were used to define ratefixed pattern(RR)and row-fixed pattern(RS)density treatments.Meanwhile,four nitrogen(N)rates(0,144,192,and 240 kg N ha-1,termed N0,N144,N192,and N240)were applied with three densities(225,292.5,and 360×10^(4)plants ha^(-1),termed D225,D292.5,and D360).The wheat canopy was clipped into three equal vertical layers(top,middle,and bottom layers),and their chlorophyll density(Ch D)and photosynthetically active radiation interception(FIPAR)were measured.Results showed that the response of Ch D and FIPAR to N rate,density,and pattern varied with different layers.N rate,density,and pattern had significant interaction effects on Ch D.The maximum values of whole-canopy Ch D in the two seasons appeared in N240 combined with D292.5 and D360 under RR,respectively.Across two growing seasons,FIPAR values of RR were higher than those of RS by 29.37%for the top layer and 5.68%for the middle layer,while lower than those of RS by 20.62%for the bottom layer on average.With a low N supply(N0),grain yield was not significantly affected by density for both patterns.At N240,increasing density significantly increased yield under RR,but D360 of RS significantly decreased yield by 3.72%and 9.00%versus D225 in two seasons,respectively.With an appropriate and sufficient N application,RR increased the yield of densely planted wheat more than RS.Additionally,the maximum yield in two seasons appeared in the combination of D360 with N144 or N192 rather than of D225 with N240 under both patterns,suggesting that dense planting combined with an appropriate N-reduction application is feasible to increase photosynthesis capacity and yield.展开更多
Gadolinium zirconate（Gd2Zr2O7） nanocrystals were prepared via two different combustion methods： citric acid combustion（CAC） and stearic acid combustion（SAC）. The effects of the different preparation methods on ...Gadolinium zirconate（Gd2Zr2O7） nanocrystals were prepared via two different combustion methods： citric acid combustion（CAC） and stearic acid combustion（SAC）. The effects of the different preparation methods on the phase composition, microtopography, and sintering densification of the resulting Gd2Zr2O7 nanopowders were investigated by thermal-gravimetric and differential thermal analysis（TG-DTA）, Fourier transform infrared spectroscopy（FTIR）, X-ray diffraction（XRD）, and transmission electron microscopy（TEM） techniques. The results indicated that both methods could produce Gd2Zr2O7 nanopowders with an excellent defective fluorite structure. The reaction time was reduced by the SAC method, compared with the CAC method. The nanopowders synthesized by the two methods were different in grain size distribution. The resulting nanoparticle diameter was about 50 nm for CAC and 10 nm for SAC. After vacuum sintering, the sintered bodies also had a different relative density of about 93% and 98%, respectively. Thus the preparation of Gd2Zr2O7 nanopowders by SAC was the first choice to achieve the desired sintering densification.展开更多
基金supported by the National Natural Science Foundation of China(No.50974040)the Fundamental Research Funds for the Central Universities(No.N100402009)
文摘Two packing structures with the maximum packing densities of 0.64 and 0.74 for the amorphous state and crystalline state, respectively, were numerically reproduced in the packing densification of equal spheres subjected to one- dimensional and three-dimensional vibrations using the discrete element method （DEM）, and the results were physically validated. These two packing structures were analyzed in terms of coordination number （CN）, radial distribution function （RDF）, angular distribution function （ADF）, and pore size distribution （Voronoi/Delaunay tessellation）. It is shown that CN distributions have the peak values of 7 and 12 for the amorphous state and crystalline state, respectively. RDF and ADF distributions show isolated peaks and orientation preferences for the crystalline state, indicating the long range and angle correlation among particles commonly observed in the crystalline state. Voronoi/Delaunay tessellation also shows smaller and narrower pore size distribution for the crystalline state.
文摘Boron carbide(B_(4)C)has excellent high-temperature oxidation resistance,high hardness,low relative density,high melting point and excellent abrasive resistance,which is widely used in fields such as refractories,wear-resistant materials and lightweight protective materials.The research progress and application of B_(4)C materials in China and overseas in recent years were summarized.The influences of sintering processes(pressureless sintering,hot-pressing sintering,hot isostatic pressing sintering,spark plasma sintering and microwave sintering)and sintering additives(simple substances,oxides and carbides)on the B_(4)C densification were analyzed.The development of B_(4)C materials was prospected.
文摘The nano-infiltration and transient eutectic-phase (NITE) method is one of the most attractive methods for fabrication of SiC and SiC/SiC composites. In the NITE method, preform densification is essential option for damage less near-net shaping technique. However, optimization of preform densification is insufficient yet. The objective of this study is to evaluate the effects of pressure during preform densification on SiC/SiC composites. The preform before preform densification has many pores in the inter-prepreg sheets. These pores were disappeared by preform densification. As the effects of pressure on preform, densification in the intra-fiber-bundle was improved due to increasing pressure. Flexural strength of the preforms with 1 MPa and 17 MPa indicated almost same value. The result suggested that increasing of pressure did not cause any change in fiber properties. In the effects of pressure on the composites, the composites with 17 MPa was exhibited improvement in bulk density and mechanical property, compared with that with 1 MPa.
基金supported by the National Key Research and Development Program of China(2022YFD2301402)the National Natural Science Foundation of China(32071903)+2 种基金the Jiangsu Provincial Key Technologies R&D Program of China(BE2019386)the Guidance Foundation of the Sanya Institute of Nanjing Agricultural University,China(NAUSY2D01)the Earmarked Fund for Jiangsu Agricultural Industry Technology System(JATS(2022)468,JATS(2022)168)。
文摘A two-year field experiment was conducted to measure the effects of densification methods on photosynthesis and yield of densely planted wheat.Inter-plant and inter-row distances were used to define ratefixed pattern(RR)and row-fixed pattern(RS)density treatments.Meanwhile,four nitrogen(N)rates(0,144,192,and 240 kg N ha-1,termed N0,N144,N192,and N240)were applied with three densities(225,292.5,and 360×10^(4)plants ha^(-1),termed D225,D292.5,and D360).The wheat canopy was clipped into three equal vertical layers(top,middle,and bottom layers),and their chlorophyll density(Ch D)and photosynthetically active radiation interception(FIPAR)were measured.Results showed that the response of Ch D and FIPAR to N rate,density,and pattern varied with different layers.N rate,density,and pattern had significant interaction effects on Ch D.The maximum values of whole-canopy Ch D in the two seasons appeared in N240 combined with D292.5 and D360 under RR,respectively.Across two growing seasons,FIPAR values of RR were higher than those of RS by 29.37%for the top layer and 5.68%for the middle layer,while lower than those of RS by 20.62%for the bottom layer on average.With a low N supply(N0),grain yield was not significantly affected by density for both patterns.At N240,increasing density significantly increased yield under RR,but D360 of RS significantly decreased yield by 3.72%and 9.00%versus D225 in two seasons,respectively.With an appropriate and sufficient N application,RR increased the yield of densely planted wheat more than RS.Additionally,the maximum yield in two seasons appeared in the combination of D360 with N144 or N192 rather than of D225 with N240 under both patterns,suggesting that dense planting combined with an appropriate N-reduction application is feasible to increase photosynthesis capacity and yield.
文摘Gadolinium zirconate（Gd2Zr2O7） nanocrystals were prepared via two different combustion methods： citric acid combustion（CAC） and stearic acid combustion（SAC）. The effects of the different preparation methods on the phase composition, microtopography, and sintering densification of the resulting Gd2Zr2O7 nanopowders were investigated by thermal-gravimetric and differential thermal analysis（TG-DTA）, Fourier transform infrared spectroscopy（FTIR）, X-ray diffraction（XRD）, and transmission electron microscopy（TEM） techniques. The results indicated that both methods could produce Gd2Zr2O7 nanopowders with an excellent defective fluorite structure. The reaction time was reduced by the SAC method, compared with the CAC method. The nanopowders synthesized by the two methods were different in grain size distribution. The resulting nanoparticle diameter was about 50 nm for CAC and 10 nm for SAC. After vacuum sintering, the sintered bodies also had a different relative density of about 93% and 98%, respectively. Thus the preparation of Gd2Zr2O7 nanopowders by SAC was the first choice to achieve the desired sintering densification.
