Microstructure,Properties and Crack Suppression Mechanism of High-speed Steel Fabricated by Selective Laser Melting at Different Process Parameters

To enrich material types applied to additive manufacturing and enlarge application scope of additive manufacturing in conformal cooling tools,M2 high-speed steel specimens were fabricated by selective laser melting(SLM).Effects of SLM parameters on the microstructure and mechanical properties of M2 high-speed steel were investigated.The results showed that substrate temperature and energy density had significant influence on the densification process of materials and defects control.Models to evaluate the effect of substrate temperature and energy density on hardness were studied.The optimized process parameters,laser power,scan speed,scan distance,and substrate temperature,for fabricated M2 are 220 W,960 mm/s,0.06 mm,and 200℃,respectively.Based on this,the hardness and tensile strength reached 60 HRC and 1000 MPa,respectively.Interlaminar crack formation and suppression mechanism and the relationship between temperature gradient and thermal stress were illustrated.The inhibition effect of substrate temperature on the cracks generated by residual stresses was also explained.AM showed great application potential in the field of special conformal cooling cutting tool preparation.

Influence of Rare Earth Elements on Microstructure and Mechanical Properties of Cast High-Speed Steel Rolls

The influence of rare earth （RE） elements on the solidification process and eutectic transformation and mechanical properties of the high-V type cast, high-speed steel roll was studied. Test materials with different RE additions were prepared on a horizontal centrifugal casting machine. The solidification process, eutectic structure transformation, carbide morphology, and the elements present, were all investigated by means of differential scanning calorimetry （DSC） and scanning electron microscopy energy dispersive spectrometry （SEM-EDS）. The energy produced by crack initiation and crack extension was analyzed using a digital impact test machine. It was found that rare earth elements increased the tensile strength of the steel by inducing crystallization of earlier eutectic γ-Fe during the solidification process, which in turn increased the solidification temperature and thinned the dendritic grains. Rare earth elements with large atomic radius changed the lattice parameters of the MC carbide by forming rare earth carbides. This had the effect of dispersing longpole M C carbides to provide carbide grains, thereby, reducing the formation of the gross carbide and making more V available, to increase the secondary hardening process and improve the hardness level. The presence of rare earth elements in the steel raised the impact toughness by changing the mechanism of MC carbide formation, thereby increasing the crack initiation energy.

Precipitation and decomposition behaviors of carbides in AISI M2 high-speed steel with nitrogen and mischmetal

The behaviors of the precipitation and decomposition of carbides in AISI M2 high-speed steel modified by nitrogen and mischmetal were investigated using DSC, XRD, SEM and TEM. The as-cast microstructure of the experimental steel consists of dendrites of iron matrix, networks of eutectic carbides and secondary carbides. The average distance between networks is about 34 μm. The carbides mainly include M_2C, M(C,N) and M_6C, and their relative contents are 58.5%, 30.3% and 11.2%, respectively. The average spacing between the M_2C fibers is 1.5 μm. The decomposition of M_2C occurs from 897.2 to 1221.5 ℃(heating rate of 200 ℃/h). Some precipitated carbide particles occur in the M_2C matrix after holding for 15 min at 1100 ℃. With increasing holding time, the carbide fibers neck down more and more obviously until they are broken down. The spectral peaks of M_2C almost disappear after holding for 60 min. The spectral peaks of M_6C gradually strengthen with the holding time, and the relative content of M_6C increases to 79.8% after holding for 60 min. After holding for 180 min, the carbide fibers disappear, and the decomposition products consist of fine carbide particles(about 300 nm) and short rod-like carbides(about 3.5 μm).

Effect of melting rate on microsegregation and primary MC carbides in M2 high-speed steel during electroslag remelting

Large-size primary MC carbides can significantly reduce the performance of M2 high-speed steel.To better control the morphology and size of primary MC carbides,the effect of melting rate on microsegregation and primary MC carbides of M2 steel during electroslag remelting was investigated.When the melting rate is decreased from 2 kg·min^(-1) to 0.8 kg·min^(-1),the columnar dendrites are gradually coarsened,and the extent of segregation of Mo and V is alleviated,while the segregation of Cr becomes severe.At 2 kg·min^(-1),the number of primary MC carbides per unit area with the sizes in the range of 2 μm to 6 μm accounts for about 75% of all MC carbides,while the carbides are mainly concentrated on the size larger than 8 μm at 0.8 kg·min^(-1).Thermodynamic calculations based on the Clyne-Kurz (simplified to C-K) model shows that MC carbide can be precipitated in the final solidification stage and a smaller secondary dendrite arm spacing caused by higher melting rate (2 kg·min^(-1) in this experiment) facilitates the refinement of primary MC carbides.

PREDICTION OF FLOW STRESS OF HIGH-SPEED STEEL DURING HOT DEFORMATION BY USING BP ARTIFICIAL NEURAL NETWORK

The hot deformation behavior of TI (18W-4Cr-1V) high-speed steel was investigated by means of continuous compression tests performed on Gleeble 1500 thermomechan- ical simulator in a wide range of tempemtures (950℃-1150℃) with strain rotes of 0.001s-1-10s-1 and true strains of 0-0. 7. The flow stress at the above hot defor- mation conditions is predicted by using BP artificial neural network. The architecture of network includes there are three input parameters:strain rate,temperature T and true strain , and just one output parameter, the flow stress ,2 hidden layers are adopted, the first hidden layer includes 9 neurons and second 10 negroes. It has been verified that BP artificial neural network with 3-9-10-1 architecture can predict flow stress of high-speed steel during hot deformation very well. Compared with the prediction method of flow stress by using Zaped-Holloman parumeter and hyperbolic sine stress function, the prediction method by using BP artificial neurul network has higher efficiency and accuracy.

Microstructure simulation of rapidly solidified ASP30 high-speed steel particles by gas atomization

In this study, the microstructure evolution of rapidly solidified ASP30 high-speed steel particles was predicted using a simulation method based on the cellular automaton-finite element （CAFE） model. The dendritic growth kinetics, in view of the characteristics of ASP30 steel, were calculated and combined with macro heat transfer calculations by user-defined functions （UDFs） to simulate the microstructure of gas-atomized particles. The relationship among particle diameter, undercooling, and the convection heat transfer coefficient was also inves- tigated to provide cooling conditions for simulations. The simulated results indicated that a columnar grain microstructure was observed in small particles, whereas an equiaxed microstructure was observed in large particles. In addition, the morphologies and microstructures of gas-atomized ASP30 steel particles were also investigated experimentally using scanning electron microscopy （SEM）. The experimental re- suits showed that four major types ofmicrostructures were formed： dendritic, equiaxed, mixed, and multi-droplet microstructures. The simu- lated results and the available experimental data are in good agreement.

Installation position determination of wind speed sensors on steel pole along a high-speed railway

In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Based on the three-dimensional steady Reynolds-averaged Navier-Stokes equations and k-ε double equations turbulent model, the field flow around the wind speed sensor and the steel pole along a high-speed railway was simulated on an unstructured grid. The grid-independent validation was conducted and the accuracy of the present numerical simulation method was validated by experiments and simulations carried out by previous researchers. Results show that the steel pole has a significant influence on the measurement results of wind speed sensors. As the distance between two wind speed sensors is varied from 0.3 to 1.0 m, the impact angles are less than ±20°, it is proposed that the distance between two wind speed sensors is 0.8 m at least, and the interval between wind speed sensors and the steel pole is more than 1.0 m with the sensors located on the upstream side.

Microstructure and cutting performance of CrTiAlN coating for high-speed dry milling

Using a closed field unbalanced magnetron sputtering system,the cemented carbide end mills were coated with a CrTiAlN hard coating,which consisted of a Cr adhesive layer,a CrN interlayer and a CrTiAlN top layer.The microstructure and mechanical properties of the coating were investigated by X-ray diffraction（XRD）,scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,micro indentation and scratch test.The cutting performance of the coated end mills were conducted by high-speed dry milling hardened steel（P20,HRC 45）.The results indicates that the coating is composed of（Cr,Ti,Al）N columnar grains with nanolayers.The coating exhibits good adhesion to cemented carbide substrate and high microhardness of around 30 GPa.The coated end mills show significant improvement on tool life and much lower cutting force as compared to the uncoated ones.And the related mechanisms were discussed.

Computer simulation on the controlled cooling of 82B high-speed rod

A modified temperature-phase transformation field coupled nonlinear mathematical model was made and used in computer simulation on the controlled cooling of 82B high-speed rods. The surface temperature history and volume fraction of pearlite as well as the phase transformation history were simulated by using the finite element software Marc/Mentat. The simulated results were compared with the actual measurement and the agreement is good which can validate the presented computational models.

Effect of Fe content on type and distribution of carbides in medium-entropy high-speed steels

The effect of iron content on the type and distribution of carbides in the vacuum arc melted Fex(AlCoCrCuNiV)_(88.05-x)Mo_(5)W_(6)-C_(0.95)(x=69,76,83 wt%,respectively) medium-entropy high-speed steels(ME-HSSs) was studied.The homogeneous distribution of granular MC carbides(M refers to the carbides forming transition metal elements,such as W,Mo and V),both at the grain boundary and in the martensitic matrix,was obtained in the Fe_(76)(AlCoCrCuNiV)_(12.05)Mo_(5)W_(6)-C_(0.95)ME-HSS,after quenching at 1210 ℃ followed by triple tempering at 530 ℃.A maximum hardness of about 841 HV_(0.5) was achieved,even higher than the maximum hardness of the commercially available M_(2)(W_(6)Mo_(5)Cr_(4)V_(2)) HSS,826 HV_(0.5).The medium-entropy effect was shown to be beneficial to transform the solidified primary carbide network into finely dispersed granular MC.However,when the iron content was further reduced to 69 wt%,the enhanced entropy effect promoted the dispersion of carbides but at the same time led to a decrease in the carbide content,so that the maximum hardness(816 HV_(0.5)) was slightly lower than the maximum hardness of M2-HSS.The results provide a novel alloy system together with a simple heat treatment method to obtain hard HSSs,and more importantly to eliminate the primary carbide network which is harmful to the toughness of traditional HSS.

Centrifugal Casting of High Speed Steel/Nodular Cast Iron Compound Roll Collar

The centrifugal casting of compound HSS/nodular cast iron roll collar was studied,and the factors affecting transition zone quality were analyzed.The pouring temperature and interval in pouring are the main factors affecting transition zone quality.By controlling process parameter and flux adding during casting,high quality roll collar was obtained.The cause,why in the casting of HSS part,segregation appears easily,was analyzed and the countermeasure eliminating segregation was put forward,the measure eliminating heat treatment crackling was also put forward.

含钴高钒高速钢回火组织演变和耐磨性

采用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射仪(XRD)、能谱仪(EDS)、显微硬度计和磨损试验机等研究了含钴高钒高速钢经1050℃风冷淬火后在不同温度回火保温不同时间后的组织演变、硬度和耐磨性。结果表明:在不同回火温度下,含钴高钒高速钢中均有MC和M_(2)C型二次碳化物析出,并在基体中均匀分布。当回火温度为400℃时,含钴高钒高速钢中含有少量残留奥氏体;当回火温度超过500℃,残留奥氏体消失;随着回火温度升高,马氏体发生分解,600℃回火后,孪晶马氏体已完全分解。含钴高钒高速钢经500℃回火后硬度达到峰值,磨损量最小,耐磨性最好,回火温度继续升高后,硬度大幅度下降。在500℃回火时,随着保温时间的延长,含钴高钒高速钢的马氏体分解量增加,保温16 h后,马氏体已完全分解,基体显微硬度明显下降,由于二次碳化物析出的强化效应,导致回火保温时间增加对其宏观硬度无明显影响。

Effect of Cryogenic and QPQ Compound Treatment on the Microstructures and Performance of High Speed Steel

China’s High-speed steel cutting tools hold a considerable share in the global market. However, the overproduction of low-end HSS tools causes serious resource waste and low efficiency, which has become one of the major problems in the tool industry in China. So a new Surface Modification technology is developed, which can make the low-end HSS tools into the high-end ones. On the analysis of the mechanism of cryogenic and quenching-polish-quenching(QPQ), the cryogenic and QPQ compound treatment are studied by using ?8 HSS(M2) drills. The nitriding layer and the base of the drill bit are Studied and analyzed, and the mechanism of compound treatment is discussed by the technological parameters adjustment and the combination test of cryogenic, nitrogen, tempering procedures, and several analysis methods such as the optics metallographic microscope, the scanning electronic microscope (SEM), X-ray diffraction and micro hardness. The cutting test is done on the drills by cryogenic treatment, QPQ treatment and cryogenic and QPQ compound treatment separately. The results indicates that the cutting life of HSS (M2) drill can be increased dramatically by cryogenic and QPQ compound treatment.

钒对高硼高速钢组织及回火析出的影响

通过钒合金化制备了不同钒含量的高硼高速钢,采用光学显微镜、扫描电镜、能谱等手段,研究了钒含量对高硼高速钢组织和宏观硬度的影响,并探究了热处理后含钒高硼高速钢的析出相形貌及结构。结果表明,高硼高速钢铸态组织主要由枝晶马氏体和M_2B硼化物组成,随着钒含量增加,基体中马氏体数量减少,铁素体数量增加,同时硼化物逐渐细化,合金的宏观硬度随钒含量增加而逐渐降低。微观分析表明,随V含量的增加,M_2B硼化物中V元素的固溶含量均增加。同时,V在硼化物中的固溶不改变富Fe硼化物中Cr的含量,但富Mo硼化物中Mo、W元素含量随合金中V含量的增加而逐渐降低。淬火加回火处理后,基体中出现了富Mo、W、V元素的二次析出相,且随着合金中V含量的提高,二次析出相的数量不断增加,其尺寸反而减小。同时,基体为细小的板条马氏体,二次析出颗粒形态为球状及短杆状,钒的加入促进了二次硼碳化物M_(23)(B,C)_6、M(B,C)、M_6(B,C)的析出。

Effect of cerium on the cleanliness of spring steel used in fastener of high-speed railway

The effects of Ce addition on the quantity, size, distribution of inclusions and the content of oxygen, sulfur and other hazardous residual elements in spring steel used as fastener in high speed railway were investigated by metallographic examination, SEM-EDS and composition analysis. The results indicated that the contents of oxygen decreased with the addition of Ce （[Ce]〈0.1%） and the content of sulfur continually decreased with increasing content of Ce （[Ce]〈1.2%）. However, with the further increase of Ce element addition, the content of [O] and T[O] began to increase. The content of Ce corresponding to the lowest [O] and T[O] lied in the range of 0.10%-0.13%and 0.045%-0.065%, respectively. The addition of Ce in spring steel resulted in the formation of rare earth oxides/oxysulfides and decreased the size of inclusions to less than 3μm in globular or spheroid shape. Moreover, the residual harmful elements （As, P, Pb and Sn） were found to exist in the Ce-containing inclusions, which had proved that the Ce addition could capture the residual elements and suppress their precipitation behaviors in the grain boundary.

Effects of mischmetal addition on phase transformation and as-cast microstructure characteristics of M2 high-speed steel

The influence of mischmetal （Ce-La） addition on phase transformation and as-cast microstructure characteristics of M2 high-speed steel （HSS） was investigated using Thermo-Calc software, differential scanning calorimetry, X-ray diffractometry and scanning electron microscopy with energy dispersive spectrometry. The results showed that the measured phase transition points of M2 HSS were broadly consistent with the theoretical results. After mischmetal addition, the liquidus peak temperature, the peak temperature of the eutectic precipitation of M6C and MC were all increased, especially for the M6C which was affected significantly and increased about 31 °C. The contents of Mo and V in the eutectic carbide decreased and that of Fe increased, while in the matrix, the Mo, V and Cr contents all increased slightly. Furthermore, the microstructure of as-cast dendrite and ledeburite were refined, the total eutectic carbide content decreased and distributed into a discontinuous network, the lamellar spacing of M2C was reduced and the lamellae became thinner.

Effect of N and Zr on as-cast microstructure and properties after annealing of a high-speed steel

Effects of N and Zr on the as-cast microstructure and properties after annealing of high-speed steel （HSS） were investigated by using electronic probe micro-analysis, Rockwell hardness test, X-ray diffractometry and differential scanning calorimetry with combination of microstructure analysis. The results indicate that the addition of N and Zr will refine the eutectic structures and enhance the stability of carbides which are mainly MC, M2C and M7C3. The coarse dendritic structures decrease significantly and most of the carbides are distributed in the microstructure uniformly. Moreover, a kind of Zr-Si compound which only exists in VC is discovered, and this new phase is speculated to be related with the spheroidization of VC. The annealing process is set up to 6 different time periods which are 1, 3, 6, 10, 15 and 20 h, respectively. In different annealing processes at 750 ℃ which is lower than austenitizing temperature, the addition of N and Zr makes the decrease of hardness more obvious and restrains the precipitation of secondary carbides with the extension of time. Moreover, when the annealing time reaches 20 h, some clusters appear in the matrix of the two samples, and the density of clusters in HSS1 is lower, but the matrix of HSS1 contains more C and alloying elements which indicate more carbides precipitate.

Evolving Mechanism of Eutectic Carbide in As-cast AISI M2 High-speed Steel at Elevated Temperature

The evolution in type, size and shape of carbides in as-cast American Iron and Steel Institute （AISI） M2 high-speed steel before and after annealing were investigated. The micromechanism which was responsible for those changes was also analyzed and discussed. At the initial stage of reheating, metastable M2C-type carbide decomposed continuously. M6C-type carbide nucleated at the interface of M2C/γ firstly and grow from surface to center. Then MC-type carbide nucleated at both surface of M6C/M6C and inner of M6C. With the increasing decomposition of the metastable M2C-type carbide, the rod-shaped construction of eutectic carbide began neck- ing, fracturing and spheroidizing gradually. Held enough time or reheated at higher temperature, particle-shaped product aggregated and grew up apparently, while secondary carbide precipitated in cell and grew up less sig- nificantly than the former. Based on the above microstructural observation, the thermodynamic mechanism for decomposition of M2C carbide, for spheroidization of products, and for the growth of particles were analyzed. The rate equations of carbides evolution were derived, too. It shows that the evolving rate is controlled by diffusion coefficients of alloy atoms, morphology of eutectic carbides and heating temperature.

An innovative method for calibrating local cooling rate in electroslag remelting of M42 high-speed steel

The determination of the local cooling rate has a great significance in optimizing the parameters of electroslag remelting(ESR)and improving the quality of the ingots.An innovative method was proposed for calibrating the local cooling rate of M42 high-speed steel(HSS)in the ESR process.After resolidification at different cooling rates under high-temperature laser confocal microscopy,the carbide network spacing of the specimen was observed using a scanning electron microscope.A functional relationship between the cooling rate and average carbide network spacing was established.The average local cooling rate of the solidification process of the M42 HSS ingot was calibrated.The results show that the higher the cool-ing rate,the smaller the network spacing of the carbides.For the steel ingot with a diameter of 360 mm,the average local cooling rate was 0.562℃/s at the surface,0.057℃/s at the position of 0.25D(where D is the diameter of the ingot),and 0.046℃/s at the center of the ingot.

Effect of Nb addition on microstructure and mechanical properties of 25CrNiMoV(DZ2)steel for high-speed railway axles

The microstructure,precipitates and properties of 25CrNiMoV(DZ2)steel for high-speed railway axles with different Nb contents were investigated by means of optical microscopy,scanning electron microscopy,electron back-scattering diffraction,transmission electron microscopy and physicochemical phase analysis.The results show that the grain size of the original austenite of the test steels decreases from 20.5 to 14.2 and 10.8μm after adding 0.026 and 0.039 wt.%Nb to a 25CrNiMoV steel,respectively.Moreover,the block width of the tempered martensite in the test steels is refined from 1.91 to 1.72 and 1.60µm,respectively.MC-type precipitates in 25CrNiMoV steel are mainly VC,while(Nb,V)C gradually precipitates when Nb is microalloyed,and the amount of precipitates increases with increasing Nb content.Through strengthening mechanism analysis,it is found that grain refinement strengthening is the primary way to increase the strength.The improvement in the yield strength with increasing Nb content is attributed to a significant increase in precipitation strengthening,grain refinement strengthening and dislocation strengthening.