Yield Stability of Direct-sowing and Early-maturing Excellent Brassica napus (Attar No.8)

[Objective] The aim was to analyze yield stability of attar No.8, which is direct sowing and early-maturing. [Method] Analysis was made on yielding ability, stability and adaptability of attar No.8 in Yunnan Province during 2006-2009 with DPS software and stability assessment was conducted on yield and major economic characters of the variety in different periods and experimental plots. [Result] Average yield of attar No.8 during three years in 24 plots achieved 3 379.17 kg/hm2; it grew tightly and is featured with early matureness. In addition, grain density, pod number and annul production differed little in different years and the variety in eight ecological conditions all showed high production potential, yielding ability and stability, which proved that attar No.8 is suitable to be grown in Yunnan and southern early-maturing areas in China. [Conclusion] The research provided references for selection and breeding of rapeseeds＇ variety which enjoys high and stable yield.

Identification of candidate genes for early-maturity traits by combining BSA-seq and QTL mapping in upland cotton(Gossypium hirsutum L.)

Cotton breeding for the development of early-maturing varieties is an effective way to improve multiple cropping indexes and alleviate the conflict between grains and cotton in the cultivated fields in China.In the present study,we aimed to identify upland cotton quantitative trait loci(QTLs)and candidate genes related to early-maturity traits,including whole growth period(WGP),flowering timing(FT),node of the first fruiting branch(NFFB),height of the node of the first fruiting branch(HNFFB),and plant height(PH).An early-maturing variety,CCRI50,and a latematuring variety,Guoxinmian 11,were crossed to obtain biparental populations.These populations were used to map QTLs for the early-maturity traits for two years(2020 and 2021).With BSA-seq analysis based on the data of population 2020,the candidate regions related to early maturity were found to be located on chromosome D03.We then developed 22 polymorphic insertions or deletions(InDel)markers to further narrow down the candidate regions,resulting in the detection of five and four QTLs in the 2020 and 2021 populations,respectively.According to the results of QTL mapping,two candidate regions(InDel_G286-InDel_G144 and InDel_G24-InDel_G43)were detected.In these regions,three genes(GH_D03G0451,GH_D03G0649,and GH_D03G1180)have nonsynonymous mutations in their exons and one gene(GH_D03G0450)has SNP variations in the upstream sequence between CCRI50 and Guoxinmian 11.These four genes also showed dominant expression in the floral organs.The expression levels of GH_D03G0451,GH_D03G0649 and GH_D03G1180 were significantly higher in CCRI50 than in Guoxinmian 11 during the bud differentiation stages,while GH_D03G0450 showed the opposite trend.Further functional verification of GH_D03G0451 indicated that the GH_D03G0451-silenced plants showed a delay in the flowering time.The results suggest that these are the candidate genes for cotton early maturity,and they may be used for breeding early-maturity cotton varieties.

Influence of the Number of Reserved Fruit on Fruit-bearing Branch of Early-maturing Citrus unshiu Marc. on Fruit Growth and Development

In order to provide theoretical references for early-maturing Citrus unshiu Marc. in terms of fruit thinning, timely fertilization and harvesting, as wel as for for-mulation of of Early-maturing Citrus unshiu Marc. Cultivation Technique Standards in Guizhou Province, the dynamic changes of fruit longitudinal diameter and trans-verse diameter of 11-year-old and 12-year-old early maturing Citrus unshiu Marc. were tested in two consecutive years and the effects of single-fruit bearing branch on fruit growth and development were compared. The results showed annual varia-tion of longitudinal and transverse diameter of the fruit in Guizhou grew faster at the beginning and then slowed down gradual y, maintaining a slow-growth period after October; the growth curve final y was flat in mature stage. General y, the growth and development stage of fruit showed four growth peaks, showing an in-creasing S-shape curve and fruit net increase also had four growth peaks with a double S-shape curve. Specifical y, longitudinal diameters growth alternated with transverse diameter growth and the former proved much stronger. In terms of ef-fects of single-fruit bearing branch on longitudinal and transverse diameter growth, the number of reserved fruits had direct effects on the growth, net increase of weight, time of growth peak, fluctuation and the number of growth peak. The growth and development, and quality of fruits in the treatments with two or three fruits re-served on single fruit-bearing branch proved better compared with the control with four left fruits. It suggested that early June and early July are the best time for fer-tilization of early-maturing Citrus unshiu Marc. in Guizhou Pprovince and would have better effect if combined with foliage spraying. The suitable harvest time is in the end of October. The preferred number of reserved fruit on single fruit-bearing branch is 2-3. In actual production, the implementation of flower and fruit thinning should also takes tree age, balance of tree vigor, strength of fruit bearing branch, alternate bearing phenomenon and other factors into consideration.

Effect of N Fertilization on Yield, N Absorption and Utilization of Two Species of Super High-Yielding Summer Maize

[Objective] The aim was to study on effects of N fertilizer on yield, N absorption and utilization of different cultivars of super high-yielding summer maize, in order to provide reference for reasonable N fertilization in accordance with different cultivars. [Method] Field experiment was conducted to study on effects of different N fertilizers on yield, N absorption and use efficiency of Zhengdan 958 and Xundan 20, in order to learn the effect differences at different N fertilizer levels. [Result] After N was applied, yields of the two summer maize increased significantly. Zhengdan 958 achieved the highest in yield and proceeds at 12 051.18 kg/hm2 and 1 722.40 yuan/hm2, respectively in low N level. In contrast, Xundan 20 achieved the highest at 13 166.00 kg/hm2 and 1 343.92 yuan/hm2 in the above two aspects in high N level. Compared with Zhengdan 958, Xundan 20 increased by 9.90%, 5.20% and 12.00% in N levels of 0, 240, and 450 kg/hm2, respectively. When N fertilizers were applied, protein yield of Xundan 20 was significantly higher than that of Zhengdan 958, so that higher N fertilizers contributed higher protein yield for Xundan 20. In high N level, N efficiency, N-fertilizer utilization and partial productivity of Xundan 20 were significantly higher than that of Zhengdan 958. [Conclusion] Lower N-fertilizer was suitable for Zhengdan 958 and Xundan 20 would get a good harvest if more N-fertilizers were applied. The results provided references for reasonable N fertilization.

Effects of Ratio of Row Spacing to Intrarow Spacing on Yield and Top Three Leaves of Super High-yielding Early and Late Rice

Using a split plot design, super high-yielding early rice ＆quot;Zhongjiazao 17＆quot;and ＆quot;Ganxin 203＆quot; and super high-yielding late rice ＆quot;Ganxin 688＆quot; and ＆quot;Wufengy-ouT025＆quot; were taken as materials with planting density the same at 312 000 hil s/hm2, to explore the effects of RS/IS （Ratio of row spacing to intrarow row spacing） on yield, top three leaves morphological features and its relationship of them in 2011 and 2012. The results showed that, whether early or late rice, biomass, accumula-tion and apparent utilizing rate of nitrogen were lower in RS/IS5.0 （40.0 cm ＆#215;8.0 cm） treatment, but yield of rice was higher in RS/IS2.0 （25.0 cm ＆#215;12.8 cm） treatment;grain numbers per spike of rice was more in RS/IS2.8 （30.0 cm＆#215;10.7 cm） treatment, and thousand-grain weight of rice was higher in RS/IS1.3 （20.0 cm＆#215;16.0 cm） treat-ment. For 4 varieties of early or late rice aforementioned, basal angle, opening an-gle and leaf area of 2nd leaf from top were larger in RS/IS5.0 treatment, and basal angle and opening angle were smal er in RS/IS2.0 treatment and leaf area smal er in RS/IS1.3 treatment.

Structure Parameters and Physiological Indices Research of High-quality and High-yield Apple Orchards

In order to research environment parameters and physiological indices of high-quality and high-yield apple trees, two orchards with young and mature apples trees were investigated to explore structural parameter of apple tree and community, and some physiological indices in fields and by room measurements. The results showed that tree height of high-quality orchard was in the range of 260 to 290 cm, branch angle in 70°-75°, and orchard coverage rate in 75%-94%, and the connec-tion rates between rows and trees were lower. Furthermore, the total branches of mature orchard reached 1.04 ×106 per hm2, while the young orchard was 8.79 ×105 per hm2; the leaves were thick and chlorophyl content was high, with SPAD value at 58.22. Additional y, the photosynthesis of the orchard was strong, and net photo-synthetic rate was 17.48-21.8 μmolCO2/（m2·s）. The proportions of lateral shoot of bearing part were 81% and 75% respectively.

Simplified High-yielding Cultivation Technology of Rice

[Objective] The aim was to select simplified high-yielding cultivation technology of rice. [Method] The research explored three methods of farmland prepara- tion, transplanting, and fertilization including shallow rotary tillage and deep ploughing, mechanical transplanting and hand transplanting, controlled-release fertilizer and quantitative fertilization in order to investigate effects of different treatment groups on rice characteristics, economic characteristics, as well as labor saving, yield increasing and profit improving. [Result] Rice increased by 596.4-809.55 kg/hm2, labor saving reached 120-135 per hm2, and profit improved in the range from 5 521.39 to 8 727.48 yuan/hm2 in the treatment groups by combinations of shallow rotary tillage, mechanical transplanting, and controlled-release fertilizer, of shallow rotary tillage, mechanical transplanting, and quantitative fertilization, and of deep ploughing, mechanical transplanting, and controlled release fertilizer. [Conclusion] The three models are of promising prospects in production.

High-yield Characteristics of Summer Sowing Soybean Varieties

[Objective] This study aimed to investigate the characteristics of high-yield soybean varieties.[Method] The agronomic traits of six high-yield soybean varieties and other 57 summer sowing ones were investigated from 2007 to 2010.[Result] The higher-yield summer sowing soybean varieties should have higher plants （R=0.551 6＊）,more effective pods （R=0.739 7＊）,more seeds per pod （R=0.318 9）,more flowers per plant （＞130）,higher pod setting rate （＞52％）,smaller ratio of aborted pods （＜40％）,longer tap roots （more than 20 cm） and lateral roots （more than 15 cm）,shorter bottom nodes （the length of six bottom nodes should be less than 25 cm）,lower center of gravity of the plant （＜40 cm）,greater stem dry weight,higher dry matter transformation rate and continuously increasing seed weight in late seed filling stage.The ideal growth stage model for summer sowing soybean was that the durations between adjacent stages of sowing,seedling emergence,flowering,seed setting and maturity stage were 5,29-33,29-33,32-36 d,respectively.[Conclusion] This pattern could not only satisfy the ecological conditions for double cropping system,but also balance the full development of vegetative and reproductive growth,promote the yield formation of summer sowing soybean.

Properties of Picosecond Fluorescence of Super High-Yield Hybrid Rice

Thylakoid membrane preparations of super high-yield hybrid rice (Oryza sativa L.), Liangyoupeijiu (P9) and Shanyou 63 (SH 63) were used for investigating its spectral and time properties by using picosecond time-resolved fluorescence spectrum measuring system. The thylakoid membrane preparations of P9 and SH 63 were excited by an Ar+ laser with a pulse width of 120 ps, repetition rate of 4 MHz and wavelength of 514 nm. The time constants of the excited energy transfer in these two varieties at flowering stage and grain filling stage were calculated from the experimental data. Based on the comparative studies of the time and spectral properties of the excited fluorescence in these ultrafast dynamic experiments the following was found: at both the flowering stage and grain filling stage, the speed of the excitation energy transfer, in photosystem was faster than that in photosystem II in P9 variety; and the speed of the excitation energy transfer at grain filling stage was faster than those at flowering stage for both rice varieties; the experiments also implied that the components and assembly of pigments in SH 63, but not in P9, changed during the process from flowering stage to grain filling stage for in these two rice varieties.

Study on High-yielding Seed Production Technologies of Japonica Hybrid Rice

[Objective] This study aimed to investigate the high-yielding seed production technologies of japonica hybrid rice. [Method] Key technologies affecting the seed production of japonica hybrid rice were investigated based on manual transplanting experiment, mechanical transplanting experiment, paclobutrazol chemical control experiment, leaf-clipping experiment, gibberellic acid treatment experiment and experiment of different row ratios of male and female parents. [Result] The duration from seeding to heading was significantly shortened with sowing date postponing. The sowing date of mechanical-transplanting parents should be 3 -4 d earlier than that of manual-transplanting parents. Spraying paclobutrazol had significantly control effect on plant height of rice seedlings, and the spraying dose should be determined based on the sensitivities of different parents to paclobutrazol, with an appropriate range of 600-900 g/hm2 . Leaf clipping had certain improving effect on the seed-setting rate. The appropriate spraying dose of gibberellin for japonica hybrid rice was 75-90 g/hm2 . The yield would be relatively high when row ratio of male and female parent was 6∶2. [Conclusion] This study laid the foundation for improving the yield of produced japonica hybrid rice seeds.

Changes in the Activities of C4 Pathway Enzymes and Stable Carbon Isotope Discrimination in Flag Leaves of Super High-yield Hybrid Rice

Activities of several key enzymes of C-4 photosynthesis pathway and stable carbon isotope discrimination were investigated in flag leaves of a super high-yield hybrid rice (Oryza sativa L.) cv. Peiai 64S/E32 and a traditional hybrid rice cv. Shanyou 63 at different developing stages. Results show that the activity of PEP carboxylase (PEPCase) increased with age of flag leave; the activity of NADP-malate dehydrogenase (NADP-MDH) increased and reached to a peak value at grain filling stage (68-75 d after transplanting), then fell down; the activity of NADP-MDH in cv. Peiai 64S/E32 was much higher than that in cv. Shanyou 63. Before ripening stage (95 d after transplanting), NADP-malic enzyme activity rose gradually. The level of stable carbon isotope discrimination (Delta(13)C) in flag leaves and grains at different developing stages were similar and exhibited a comparative high value at ripening stage. The average Delta(13)C in leaf of cv. Peiai 64S/E32 during different developing stages was 0.43parts per thousand more than that in cv. Shanyou 63.

Effects of culm carbohydrate partitioning on basal stem strength in a high-yielding rice population

Rice culm carbohydrate transport can simultaneously affect grain filling and stem lodging resistance by regulating non-structural carbohydrate(NSC) and structural carbohydrate(SC) contents. However, the relationship between carbohydrate transposition and culm strength is not well documented. Accordingly, a high-yielding hybrid rice cultivar(Y Liangyou 2) was tested under different N fertilization regimes at two locations, Taoyuan(a special high-yield eco-site), Yunnan province and Danyang(a representative eco-site of the middle and lower Yangtze), Jiangsu province, China. Significantly higher grain yield and basal stem strength were found at Taoyuan than Danyang under all N rates throughout the two-year experiment. At heading stage, soluble sugars, starch, cellulose and lignin contents of the basal culm at Taoyuan were significantly 132.0%, 73.7%, 1.2%, and 62.7% higher than those at Danyang, respectively. At 20 days after heading, soluble sugars and starch content at Taoyuan decreased significantly compared to Danyang, but lignin content remained higher. Culm carbohydrate transport to kernels at Taoyuan was significantly greater than that at Danyang, and the proportion of soluble sugars and starch was correspondingly 62.9%lower. However, the proportion of lignin and cellulose was 22.7% higher at Taoyuan than that at Danyang. Soluble sugars and starch partitioning were significantly reduced under an increased nitrogen application rate, but SC partitioning was little affected. There were significant positive correlations between basal culm bending stress and dry weight and cellulose and lignin proportions at both locations under all N rates, suggesting that the higher SC proportion at 20 days after heading was primarily responsible for culm strength.These results suggest that high-yielding rice populations with greater culm strength require both moderate NSC transport and greater SC accumulation.

Plant Ideotype at Heading for Super High-Yielding Rice in Double-Cropping System in South China

The newly released super high-yielding hybrid rice combinations, Yueza 122, Fengyou 428, Peiza 67, and the super high-yielding conventional cultivars, Guangchao 3 and Shengtai 1, were grown in both early and late seasons. The morphological characters of each population were investigated at the heading stage, and the data were analyzed by using ANOVY and other statistic methods. The plant ideal morphological characters at the heading stage were established as follows： 1 ） for the early-season cropping, 90-105 cm plant height; 11-12 tillers per plant; 35-40 em length and 2.1-2.2 cm width of flag leaf; 46-50 cm length and 1.8-2.1 cm width of the second leaf from the top （L2）; 59-64 cm length and 1.4-1.9 cm width of the third leaf from the top （L3）; 7°-14°, 18° and 200-33° for the ideal leaf angles of the flag leaf, L2 and L3, respectively; 2） for the late-season cropping, 90-100 cm plant height; 9-15 tillers per plant; 30-41 cm length and 1.8-2.0 cm width of flag leaf; 53-61 cm length and 1.3-1.8 cm width of L2; 52-58 cm length and 1.2-1.5 cm width of L3; 9°-19°, 15°-37° and 16°-49° for the ideal leaf angles of the flag leaf, L2 and L3, respectively. The main physiological characteristics of these varieties were also analyzed.

Study on Plant Morphological Traits and Production Characteristics of Super High-Yielding Soybean

Super high-yielding soybean cultivar Liaodou 14, soybean cultivars from Ohio in the United States, and the common soybean cultivars from Liaoning Province, China, with similar geographic latitudes and identical pod-bearing habits were used as the study materials for a comparison of morphological traits and production characteristics to provide a theoretical basis for the breeding of improved super high-yielding soybean cultivars. Using a randomized block design, different soybean cultivars from the same latitude were compared under conventional and unconventional treatments for their production characteristics, including morphological traits, leaf area index （LAI）, net photosynthesis rate, and dry matter accumulation. The specific characteristics of the super high-yielding soybean cultivar Liaodou 14 were analyzed. The results showed that the plant height of Liaodou 14 was significantly lower than that of the common cultivars from Liaoning, whereas the number of its main-stem nodes was higher than that of the cultivars from Ohio or Liaoning. A high pod density was observed in Liaodou 14 under conventional treatments. Under both conventional and unconventional treatments, the branch number of Liaodou 14 was markedly higher than that of the common cultivars from Liaoning, and its branch length and leaf inclination angle were significantly higher than those of common cultivars from Liaoning or Ohio. Only small changes in the leaf inclination angle were observed in Liaodou 14 treated with conventional or unconventional methods. Under each treatment, Liaodou 14 exhibited the lowest amplitude of reduction in SPAD values and net photosynthesis rates from the grain-filling to ripening stages; the cultivars from Ohio and the common cultivars from Liaoning exhibited more significant reductions. Liaodou 14 reached its peak LAI later than the other cultivars but maintained its LAI at a higher level for a longer duration. Under both conventional and unconventional treatments, Liaodou 14 produced a higher yield than the other two cultivars, with significant differences from the Ohio cultivars. In summary, super high-yielding soybean cultivars have several main features： suitable plant height, high pod density, good leaf structure with strong functionality, and slow leaf senescence at the late reproductive stage, which is conducive to the accumulation of dry matter and improved yield.

Survey on Early-bearing High-yielding Model Plantation of Camellia oleifera

[Objective] This study was conducted to screen the best variety and optimum planting density for constructing early-bearing high-yielding model plantation of Camellia oleifera. [Methed] This survey was carried out in two demonstration bases, one for investigating the relationship between different cultivated varieties with growth and production, the other for investigating the relationship between different planting densities with growth and production. [Result] For different cultivated varieties, Cenruan 2 showed tree height, ground diameter and crown product significantly higher than other two varieties, besides, the per unit area fruit yield of Cenruan 2 was also significantly higher than other two varieties. From flower bud differentiation,the best variety was Changlin 4, which showed number of differentiated flower buds significantly higher than Changlin 27, but there were no significant differences between Cenruan 2 with Changlin 4 and Changlin 27. For different planting densities, plant height and crown product at planting density of 1.5 m×2 m were significantly higher than those of other two planting densities, but from ground diam- eter, the best planting density was 1.5 m×1.0 m, with a ground diameter significantly higher than other two planting densities. From per unit area fruit yield, the best planting density was 1.5 m×2.0 m, under which early plant growth and fruit production were better. Therefore, the best planting density is 2.0 m ×3.0 m when constructing early-bearing high-yielding model plantations. For variety Cenruan 3, it＇s fruit production is high in the early pedod, and the best planting density is 1.5 m× 2.0 m or 1.0 m×1.5 m when constructing early-bearing high-yielding model plantations, and after 4-6 years when it put into production, the plants could be transplanted.

Investigation of Tree Structure Parameters of High-quality and High-yielding Y-shaped Pear Orchards

In order to study reasonable tree structure parameters of Y-shaped pear orchards in natural conditions and at management technical level of Tai'an area, the tree structure and population structure of high-quality and high-yielding Y-shaped pear orchards were investigated. The results showed that when the yield of Y-shaped 'Oshu' was 2 550 kg/667 m^2 in the early fully fruiting period, the quantity of the branches per 667 m^2 was about 54 000, and the number of short branches was the largest, accounting for 80.1% of total number of branches, followed by middle branches, long branches and developmental branches. As the yield of Y-shaped 'Qiuyue' was 2 875 kg/667 m^2 in the early fully fruiting period, the quantity of the branches per 667 m^2 was 51 000, and the number of short branches was the largest, accounting for 75.6% of total number of branches, followed by middle branches, long branches and developmental branches. When the yield of Y-shaped 'Niitaka' was 3 000 kg/667 m^2 in the early fully fruiting period, the quantity of the branches per 667 m^2 was 43 000, and the number of short branches was the largest, accounting for 82.0% of total number of branches, followed by long branches, middle branches and developmental branches.

Changes in Some Physiological Characteristics After Full Heading Stage in Flag Leaves of Super High-Yielding Inbred Rice

In a field experiment, rice cultivar Shanyou 63 was used as a check cultivar to investigate the changes in activity of peroxidase and contents of malondialdehyde and soluble protein after full heading stage in flag leaves of two super high-yielding inbred rice, including Shengtai 1 and Yuxiangyouzhan. The results showed that the peroxidase activities and soluble protein contents in the leaves of the three cultivars tended to increase gradually to peak values and thereafter descended during stage after full heading. Moreover, both the peroxidase activities and soluble protein contents of Shengtai 1 and Yuxiangyouzhan peaked at 8 days after full heading, which was compared with that of Shanyou 63 at 4 days later. Meanwhile, the malondialdehyde contents in the leaves of the three cultivars increased gradually after full heading stage. In addition, activities of peroxidase and contents of malondialdehyde and soluble protein in different cultivars were various at the same time. In general, for Shengtai 1 and Yuxiangyouzhan, the peroxidase activities and soluble protein contents were higher than those of Shanyou 63, whereas the malondialdehyde contents were lower compared with that of Shanyou 63. And these features could make the senescence of leaf become later and slower and photosynthetic product was more in Shengtai 1 and Yuxiangyouzhan than that in Shanyou 63.

Approach to the Ways for High-yielding Technique of Zhongzheyou No.8

[Objective] The paper was focused on the way how to increase the yield of hybrid rice Zhongzheyou No.8. [Method] The relationship among yield-related traits and their contribution to yield were investigated through correlation analysis, regression analysis and path analysis. [Result] The performance of ear, grain and weight in Zhongzheyou No.8 showed significant difference among yield levels. The enhancement of effective ears would restrain the number of total grains per ear. It was found that the direct contributions of main economic traits to yield were： number of fil ed grains per ear 〉 number of effective ears 〉1 000-grain weight 〉number of total grains per ear. [Conclusion] The promotion of high-yielding techniques was suggested as fol ows： on the basis of certain number of effective ears, number of fil ed grains per ear should be mainly focused with a consideration to grain weight.

High-yield Cultivation Technique of Salt-tolerant Spartina and Rice in Coastal Mudflat

Directing at the characteristics of coastal mudfiat saline and alkaline land, the yield of salt-tolerant Spartina and rice could reach 5 925-8 280 kg/hm^2 by the techniques of land and water resource utilization, farming improvement, construction of matched water system, seed selection and treatment, water direct seeding, seedling raising on seedbed, field transplanting, weeding, nutrient and water management, and disease and pest control, providing a scientific basis for the cultivation of Spartina and Rice in coast mudflat.

High-Yield High-Efficiency Positron Generation in High-Z Metal Targets Irradiated by Laser Produced Electrons from Near-Critical Density Plasmas

An improved indirect scheme for laser positron generation is proposed. The positron yields in high-ZZ metal targets irradiated by laser produced electrons from near-critical density plasmas and underdense plasma are investigated numerically. It is found that the positron yield is mainly affected by the number of electrons of energies up to several hundreds of MeV. Using near-critical density targets for electron acceleration, the number of high energy electrons can be increased dramatically. Through start-to-end simulations, it is shown that up to 6.78×10106.78×1010 positrons can be generated with state-of-the-art Joule-class femtosecond laser systems.