Based on the Reddy's theory of plates with the effect of higher-order shear deformations, the governing equations for bending of orthotropic plates with finite deformations were established. The differential quadr...Based on the Reddy's theory of plates with the effect of higher-order shear deformations, the governing equations for bending of orthotropic plates with finite deformations were established. The differential quadrature (DQ) method of nonlinear analysis to the problem was presented. New DQ approach, presented by Wang and Bert (DQWB), is extended to handle the multiple boundary conditions of plates. The techniques were also further extended to simplify nonlinear computations. The numerical convergence and comparison of solutions were studied. The results show that the DQ method presented is very reliable and valid. Moreover, the influences of geometric and material parameters as well as the transverse shear deformations on nonlinear bending were investigated. Numerical results show the influence of the shear deformation on the static bending of orthotropic moderately thick plate is significant.展开更多
A new higher-order shear deformation theory based on global-local superposition technique is developed. The theory satisfies the free surface conditions and the geometric and stress continuity conditions at interfaces...A new higher-order shear deformation theory based on global-local superposition technique is developed. The theory satisfies the free surface conditions and the geometric and stress continuity conditions at interfaces. The global displacement components are of the Reddy theory and local components are of the internal first to third-order terms in each layer. A two-node beam element based on this theory is proposed. The solutions are compared with 3D-elasticity solutions. Numerical results show that present beam element has higher computational efficiency and higher accuracy.展开更多
An approximate analysis for free vibration of a laminated curved panel(shell)with four edges simply supported(SS2),is presented in this paper.The transverse shear deformation is considered by using a higher-order shea...An approximate analysis for free vibration of a laminated curved panel(shell)with four edges simply supported(SS2),is presented in this paper.The transverse shear deformation is considered by using a higher-order shear deformation theory.For solving the highly coupled partial differential governing equations and associated boundary conditions,a set of solution functions in the form of double trigonometric Fourier series,which are required to satisfy the geometry part of the considered boundary conditions,is assumed in advance.By applying the Galerkin procedure both to the governing equations and to the natural boundary conditions not satisfied by the assumed solution functions,an approximate solution,capable of providing a reliable prediction for the global response of the panel,is obtained.Numerical results of antisymmetric angle-ply as well as symmetric cross-ply and angle-ply laminated curved panels are presented and discussed.展开更多
Simplified equations are derived for the analysis of stress concentration for shear-deformable shallow shells with a small hole. General solutions of the equations are obtained, in terms of series, for shallow spheric...Simplified equations are derived for the analysis of stress concentration for shear-deformable shallow shells with a small hole. General solutions of the equations are obtained, in terms of series, for shallow spherical shells and shallow circular cylindrical shells with a small circular hole. Approximate explicit solutions and numerical results are obtianed for the stress concentration factors of shallow circular cylindrical shells with a small hole on which uniform pressure is acting.展开更多
In this paper.the equations of motion of axisymmetrically laminated cylindrical orthotropic spherical shells are derived.Theeffects of transverse shear deformation and rotatory inertia are considered.On this basis,th...In this paper.the equations of motion of axisymmetrically laminated cylindrical orthotropic spherical shells are derived.Theeffects of transverse shear deformation and rotatory inertia are considered.On this basis,the dynamic response of spherical shells under axisymmetric dynamic load is calculated using the finite difference method The effects of material parameters.structural parameters and transverse shear dgformation are discussed.展开更多
arman-type nonlinear large deflection equations are derived occnrding to theReddy's higher-order shear deformation plate theory and used in the thermal postbuckling analysis The effects of initial geometric imperf...arman-type nonlinear large deflection equations are derived occnrding to theReddy's higher-order shear deformation plate theory and used in the thermal postbuckling analysis The effects of initial geometric imperfections of the plate areincluded in the present study which also includes th thermal effects.Simply supported,symmetric cross-ply laminated plates subjected to uniform or nomuniform parabolictemperature distribution are considered. The analysis uses a mixed GalerkinGolerkinperlurbation technique to determine thermal buckling louds and postbucklingequilibrium paths.The effects played by transverse shear deformation plate aspeclraio, total number of plies thermal load ratio and initial geometric imperfections arealso studied.展开更多
A differential quadrature (DQ) method for orthotropic plates was proposed based on Reddy' s theory of plates with the effects of the higher-order transverse shear deformations. Wang-Bert's DQ approach was also...A differential quadrature (DQ) method for orthotropic plates was proposed based on Reddy' s theory of plates with the effects of the higher-order transverse shear deformations. Wang-Bert's DQ approach was also further extended to handle the boundary conditions of plates. The computational convergence was studied, and the numerical results were obtained for different grid spacings and compared with the existing results. The results show that the DQ method is fairly reliable and effective.展开更多
The equations of large deformations of laminated orthotropic spherical shellsare derived. The effects of transverse shear deformation and initial imperfection are considered. on this basis. the semi-analytical solutio...The equations of large deformations of laminated orthotropic spherical shellsare derived. The effects of transverse shear deformation and initial imperfection are considered. on this basis. the semi-analytical solution of the axisymrnetric snap-throughbuckling of laminated orthotropic shallow spherical shells under uniform pressure is obtained using orthogonal collocation method. The effects of material parameters, structuralparameters, initial imperfection and transverse shear deformation are discussed.展开更多
A new nonlinear wave equation of a finite deformation elastic circular rod simultaneously introducing transverse inertia and shearing strain was derived by means of Hamilton principle. The nonlinear equation includes ...A new nonlinear wave equation of a finite deformation elastic circular rod simultaneously introducing transverse inertia and shearing strain was derived by means of Hamilton principle. The nonlinear equation includes two nonlinear terms caused by finite deformation and double geometric dispersion effects caused by transverse inertia and transverse shearing strain. Nonlinear wave equation and corresponding truncated nonlinear wave equation were solved by the hyperbolic secant function finite expansion method. The solitary wave solutions of these nonlinear equations were obtained. The necessary condition of these solutions existence was given also.展开更多
This paper develops electro-elastic relations of functionally graded cylindrical nanoshell integrated with intelligent layers subjected to multi-physics loads resting on elastic foundation.The piezoelectric layers are...This paper develops electro-elastic relations of functionally graded cylindrical nanoshell integrated with intelligent layers subjected to multi-physics loads resting on elastic foundation.The piezoelectric layers are actuated with external applied voltage.The nanocore is assumed in-homogeneous in which the material properties are changed continuously and gradually along radial direction.Third-order shear deformation theory is used for the description of kinematic relations and electric potential distribution is assumed as combination of a linear function along thickness direction to show applied voltage and a longitudinal distribution.Electro-elastic size-dependent constitutive relations are developed based on nonlocal elasticity theory and generalized Hooke’s law.The principle of virtual work is used to derive governing equations in terms of four functions along the axial and the radial directions and longitudinal electric potential function.The numerical results including radial and longitudinal displacements are presented in terms of basic input parameters of the integrated cylindrical nanoshell such as initial electric potential,small scale parameter,length to radius ratio and two parameters of foundation.It is concluded that both displacements are increased with an increase in small-scale parameter and a decrease in applied electric potential.展开更多
Transverse opening in a beam has a reducing effect of the beam stiffness which will cause a significant increase in beam deflection in the region on the opening. In this paper, a new stiffness matrix for a beam elemen...Transverse opening in a beam has a reducing effect of the beam stiffness which will cause a significant increase in beam deflection in the region on the opening. In this paper, a new stiffness matrix for a beam element with transverse opening including the effect of shear deformation has been derived. The strain energy principle is used in the derivation process of the stiffness matrix and the fixed-end force vector for the case of a concentrated or a uniformly distributed load is also derived. The accuracy of the obtained results based on the derived stiffness matrix is examined through comparison with that of the finite element method using Abaqus package and a previous study which show a good agreement with high accuracy.展开更多
An analytical method for analyzing the thermal vibration of multi-directional functionally graded porous rectangular plates in fluid media with novel porosity patterns is developed in this study.Mechanical properties ...An analytical method for analyzing the thermal vibration of multi-directional functionally graded porous rectangular plates in fluid media with novel porosity patterns is developed in this study.Mechanical properties of MFG porous plates change according to the length,width,and thickness directions for various materials and the porosity distribution which can be widely applied in many fields of engineering and defence technology.Especially,new porous rules that depend on spatial coordinates and grading indexes are proposed in the present work.Applying Hamilton's principle and the refined higher-order shear deformation plate theory,the governing equation of motion of an MFG porous rectangular plate in a fluid medium(the fluid-plate system)is obtained.The fluid velocity potential is derived from the boundary conditions of the fluid-plate system and is used to compute the extra mass.The GalerkinVlasov solution is used to solve and give natural frequencies of MFG porous plates with various boundary conditions in a fluid medium.The validity and reliability of the suggested method are confirmed by comparing numerical results of the present work with those from available works in the literature.The effects of different parameters on the thermal vibration response of MFG porous rectangular plates are studied in detail.These findings demonstrate that the behavior of the structure within a liquid medium differs significantly from that within a vacuum medium.Thereby,they offer appropriate operational approaches for the structure when employed in various mediums.展开更多
In this paper,a new displacement based high-order shear deformation theory is introduced for the static response of functionally graded plate.Unlike any other theory,the number of unknown functions involved is only fo...In this paper,a new displacement based high-order shear deformation theory is introduced for the static response of functionally graded plate.Unlike any other theory,the number of unknown functions involved is only four,as against five in case of other shear deformation theories.The theory presented is variationally consistent,has strong similarity with classical plate theory inmany aspects,does not require shear correction factor,and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions.The mechanical properties of the plate are assumed to vary continuously in the thickness direction by a simple power-law distribution in terms of the volume fractions of the constituents.Numerical illustrations concerned flexural behavior of FG plates with Metal-Ceramic composition.Parametric studies are performed for varying ceramic volume fraction,volume fraction profiles,aspect ratios and length to thickness ratios.The validity of the present theory is investigated by comparing some of the present results with those of the classical,the first-order and the other higher-order theories.It can be concluded that the proposed theory is accurate and simple in solving the static behavior of functionally graded plates.展开更多
文摘Based on the Reddy's theory of plates with the effect of higher-order shear deformations, the governing equations for bending of orthotropic plates with finite deformations were established. The differential quadrature (DQ) method of nonlinear analysis to the problem was presented. New DQ approach, presented by Wang and Bert (DQWB), is extended to handle the multiple boundary conditions of plates. The techniques were also further extended to simplify nonlinear computations. The numerical convergence and comparison of solutions were studied. The results show that the DQ method presented is very reliable and valid. Moreover, the influences of geometric and material parameters as well as the transverse shear deformations on nonlinear bending were investigated. Numerical results show the influence of the shear deformation on the static bending of orthotropic moderately thick plate is significant.
基金The project supported by the National Natural Science Foundation of China(10172023)
文摘A new higher-order shear deformation theory based on global-local superposition technique is developed. The theory satisfies the free surface conditions and the geometric and stress continuity conditions at interfaces. The global displacement components are of the Reddy theory and local components are of the internal first to third-order terms in each layer. A two-node beam element based on this theory is proposed. The solutions are compared with 3D-elasticity solutions. Numerical results show that present beam element has higher computational efficiency and higher accuracy.
文摘An approximate analysis for free vibration of a laminated curved panel(shell)with four edges simply supported(SS2),is presented in this paper.The transverse shear deformation is considered by using a higher-order shear deformation theory.For solving the highly coupled partial differential governing equations and associated boundary conditions,a set of solution functions in the form of double trigonometric Fourier series,which are required to satisfy the geometry part of the considered boundary conditions,is assumed in advance.By applying the Galerkin procedure both to the governing equations and to the natural boundary conditions not satisfied by the assumed solution functions,an approximate solution,capable of providing a reliable prediction for the global response of the panel,is obtained.Numerical results of antisymmetric angle-ply as well as symmetric cross-ply and angle-ply laminated curved panels are presented and discussed.
文摘Simplified equations are derived for the analysis of stress concentration for shear-deformable shallow shells with a small hole. General solutions of the equations are obtained, in terms of series, for shallow spherical shells and shallow circular cylindrical shells with a small circular hole. Approximate explicit solutions and numerical results are obtianed for the stress concentration factors of shallow circular cylindrical shells with a small hole on which uniform pressure is acting.
文摘In this paper.the equations of motion of axisymmetrically laminated cylindrical orthotropic spherical shells are derived.Theeffects of transverse shear deformation and rotatory inertia are considered.On this basis,the dynamic response of spherical shells under axisymmetric dynamic load is calculated using the finite difference method The effects of material parameters.structural parameters and transverse shear dgformation are discussed.
文摘arman-type nonlinear large deflection equations are derived occnrding to theReddy's higher-order shear deformation plate theory and used in the thermal postbuckling analysis The effects of initial geometric imperfections of the plate areincluded in the present study which also includes th thermal effects.Simply supported,symmetric cross-ply laminated plates subjected to uniform or nomuniform parabolictemperature distribution are considered. The analysis uses a mixed GalerkinGolerkinperlurbation technique to determine thermal buckling louds and postbucklingequilibrium paths.The effects played by transverse shear deformation plate aspeclraio, total number of plies thermal load ratio and initial geometric imperfections arealso studied.
基金key Project of the Municipal Commission of Science and Technology of Shanghai
文摘A differential quadrature (DQ) method for orthotropic plates was proposed based on Reddy' s theory of plates with the effects of the higher-order transverse shear deformations. Wang-Bert's DQ approach was also further extended to handle the boundary conditions of plates. The computational convergence was studied, and the numerical results were obtained for different grid spacings and compared with the existing results. The results show that the DQ method is fairly reliable and effective.
文摘The equations of large deformations of laminated orthotropic spherical shellsare derived. The effects of transverse shear deformation and initial imperfection are considered. on this basis. the semi-analytical solution of the axisymrnetric snap-throughbuckling of laminated orthotropic shallow spherical shells under uniform pressure is obtained using orthogonal collocation method. The effects of material parameters, structuralparameters, initial imperfection and transverse shear deformation are discussed.
基金Project supported by the National Natural Science Foundation of China (No.10472076)the Natural Science Foundation of Shanxi Province of China (No.2006021005)
文摘A new nonlinear wave equation of a finite deformation elastic circular rod simultaneously introducing transverse inertia and shearing strain was derived by means of Hamilton principle. The nonlinear equation includes two nonlinear terms caused by finite deformation and double geometric dispersion effects caused by transverse inertia and transverse shearing strain. Nonlinear wave equation and corresponding truncated nonlinear wave equation were solved by the hyperbolic secant function finite expansion method. The solitary wave solutions of these nonlinear equations were obtained. The necessary condition of these solutions existence was given also.
基金supported by the Research team project of Nanning University(2018KYTD03)the Science and Technology Planning Project of Yongning Zone of Nanning(20180205A)Henan Province Doctor Startup Fund of China under Grant No.2012BZ01.
文摘This paper develops electro-elastic relations of functionally graded cylindrical nanoshell integrated with intelligent layers subjected to multi-physics loads resting on elastic foundation.The piezoelectric layers are actuated with external applied voltage.The nanocore is assumed in-homogeneous in which the material properties are changed continuously and gradually along radial direction.Third-order shear deformation theory is used for the description of kinematic relations and electric potential distribution is assumed as combination of a linear function along thickness direction to show applied voltage and a longitudinal distribution.Electro-elastic size-dependent constitutive relations are developed based on nonlocal elasticity theory and generalized Hooke’s law.The principle of virtual work is used to derive governing equations in terms of four functions along the axial and the radial directions and longitudinal electric potential function.The numerical results including radial and longitudinal displacements are presented in terms of basic input parameters of the integrated cylindrical nanoshell such as initial electric potential,small scale parameter,length to radius ratio and two parameters of foundation.It is concluded that both displacements are increased with an increase in small-scale parameter and a decrease in applied electric potential.
文摘Transverse opening in a beam has a reducing effect of the beam stiffness which will cause a significant increase in beam deflection in the region on the opening. In this paper, a new stiffness matrix for a beam element with transverse opening including the effect of shear deformation has been derived. The strain energy principle is used in the derivation process of the stiffness matrix and the fixed-end force vector for the case of a concentrated or a uniformly distributed load is also derived. The accuracy of the obtained results based on the derived stiffness matrix is examined through comparison with that of the finite element method using Abaqus package and a previous study which show a good agreement with high accuracy.
文摘An analytical method for analyzing the thermal vibration of multi-directional functionally graded porous rectangular plates in fluid media with novel porosity patterns is developed in this study.Mechanical properties of MFG porous plates change according to the length,width,and thickness directions for various materials and the porosity distribution which can be widely applied in many fields of engineering and defence technology.Especially,new porous rules that depend on spatial coordinates and grading indexes are proposed in the present work.Applying Hamilton's principle and the refined higher-order shear deformation plate theory,the governing equation of motion of an MFG porous rectangular plate in a fluid medium(the fluid-plate system)is obtained.The fluid velocity potential is derived from the boundary conditions of the fluid-plate system and is used to compute the extra mass.The GalerkinVlasov solution is used to solve and give natural frequencies of MFG porous plates with various boundary conditions in a fluid medium.The validity and reliability of the suggested method are confirmed by comparing numerical results of the present work with those from available works in the literature.The effects of different parameters on the thermal vibration response of MFG porous rectangular plates are studied in detail.These findings demonstrate that the behavior of the structure within a liquid medium differs significantly from that within a vacuum medium.Thereby,they offer appropriate operational approaches for the structure when employed in various mediums.
文摘In this paper,a new displacement based high-order shear deformation theory is introduced for the static response of functionally graded plate.Unlike any other theory,the number of unknown functions involved is only four,as against five in case of other shear deformation theories.The theory presented is variationally consistent,has strong similarity with classical plate theory inmany aspects,does not require shear correction factor,and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions.The mechanical properties of the plate are assumed to vary continuously in the thickness direction by a simple power-law distribution in terms of the volume fractions of the constituents.Numerical illustrations concerned flexural behavior of FG plates with Metal-Ceramic composition.Parametric studies are performed for varying ceramic volume fraction,volume fraction profiles,aspect ratios and length to thickness ratios.The validity of the present theory is investigated by comparing some of the present results with those of the classical,the first-order and the other higher-order theories.It can be concluded that the proposed theory is accurate and simple in solving the static behavior of functionally graded plates.
