Enhancing efficiency and stability of organic solar cells through a simplified four-step synthesis of fully non-fused ring electron acceptor

Design and synthesis of superior cost-effective non-fullerene acceptors(NFAs)are still big challenges for facilitating the commercialization of organic solar cells(OSCs),yet to be realized.Herein,two medium bandgap fully non-fused ring electron acceptors(NFREAs,medium bandgap,i,e.,1,3-1,8 eV),namely PTR-2Cl and PTR-4Cl are synthesized with only four steps by using intramolecular noncovalent interaction central core,structured alkyl side chain orientation linking units and flanking with different electron-withdrawing end group.Among them,PTR-4C1 exhibits increased average electrostatic potential(ESP)difference with polymer donor,enhanced crystallinity and compactπ-πstacking compared with the control molecule PTR-2CI.As a result,the PTR-4Cl-based OSC achieved an impressive power conversion efficiency(PCE)of 14.72%,with a much higher open-circuit voltage(V_(OC))of 0.953 V and significantly improved fill factor(FF)of 0.758,demonstrating one of the best acceptor material in the top-performing fully NFREA-based OSCs with both high PCE and V_(OC).Notably,PTR-4Cl-based cells maintain a good T_80lifetime of its initial PCE after over 936 h under a continuous thermal annealing treatment and over1300 h T_(80)lifetime without encapsulation.This work provides a cost-effective design strategy for NFREAs on obtaining high V_(OC),efficient exciton dissociation,and ordered molecular packing and thus high-efficiency and stable OSCs.

A hierarchical salt-rejection strategy for sustainable and high-efficiency solar-driven desalination

Solar steam generation(SSG)is widely regarded as one of the most sustainable technologies for seawater desalination.However,salt fouling severely compromises the evaporation performance and lifetime of evaporators,limiting their practical applications.Herein,we propose a hierarchical salt-rejection(HSR)strategy to prevent salt precipitation during long-term evaporation while maintaining a rapid evaporation rate,even in high-salinity brine.The salt diffusion process is segmented into three steps—insulation,branching diffusion,and arterial transport—that significantly enhance the salt-resistance properties of the evaporator.Moreover,the HSR strategy overcomes the tradeoff between salt resistance and evaporation rate.Consequently,a high evaporation rate of 2.84 kg m^(-2) h^(-1),stable evaporation for 7 days cyclic tests in 20 wt%NaCl solution,and continuous operation for 170 h in natural seawater under 1 sun illumination were achieved.Compared with control evaporators,the HSR evaporator exhibited a>54%enhancement in total water evaporation mass during 24 h continuous evaporation in 20 wt%salt water.Furthermore,a water collection device equipped with the HSR evaporator realized a high water purification rate(1.1 kg m^(-2) h^(-1)),highlighting its potential for agricultural applications.

Enabling high-efficiency ethanol oxidation on NiFe-LDH via deprotonation promotion and absorption inhibition

Nucleophile oxidation reaction(NOR), represented by ethanol oxidation reaction(EOR), is a promising pathway to replace oxygen evolution reaction(OER). EOR can effectively reduce the driving voltage of hydrogen production in direct water splitting. In this work, large current and high efficiency of EOR on a Ni, Fe layered double hydroxide(NiFe-LDH) catalyst were simultaneously achieved by a facile fluorination strategy. F in NiFe-LDH can reduce the activation energy of the dehydrogenation reaction, thus promoting the deprotonation process of NiFe-LDH to achieve a lower EOR onset potential. It also weakens the absorption of OH-and nucleophile electrooxidation products on the surface of NiFe-LDH at a higher potential, achieving a high current density and EOR selectivity, according to density functional theory calculations. Based on our experiment results, the optimized fluorinated NiFe-LDH catalyst achieves a low potential of 1.386 V to deliver a 10 mA cm^(-2)EOR. Moreover, the Faraday efficiency is greater than 95%, with a current density ranging from 10 to 250 mA cm^(-2). This work provides a promising pathway for an efficient and cost-effective NOR catalyst design for economic hydrogen production.

Low organic matter abundance and highly efficient hydrocarbon generation of saline source rock in the Qaidam Basin,NW China

The geochemical analysis and experimental simulation are comprehensively used to systematically study the hydrocarbon generation material,organic matter enrichment and hydrocarbon generation model of Paleogene source rock in the Western Qaidam Depression,Qaidam Basin,NW China.Three main factors result in low TOC values of saline lacustrine source rock of the Qaidam Basin:relatively poor nutrient supply inhibits the algal bloom,too fast deposition rate causes the dilution of organic matter,and high organic matter conversion efficiency causes the low residual organic carbon.For this type of hydrogen-rich organic matter,due to the reduction of organic carbon during hydrocarbon generation,TOC needs to be restored based on maturity before evaluating organic matter abundance.The hydrocarbon generation of saline lacustrine source rocks of the Qaidam Basin is from two parts:soluble organic matter and insoluble organic matter.The soluble organic matter is inherited from organisms and preserved in saline lacustrine basins.It generates hydrocarbons during low-maturity stage,and the formed hydrocarbons are rich in complex compounds such as NOS,and undergo secondary cracking to form light components in the later stage;the hydrocarbon generation model of insoluble organic matter conforms to the traditional“Tissot”model,with an oil generation peak corresponding to Ro of 1.0%.

Brominated PEAI as Multi-Functional Passivator for High-Efficiency Perovskite Solar Cell

The interfaces of perovskite solar cells(PSCs)are well known to be rich in deep-level carrier traps,which serve as non-radiative recombination centers and limit the open-circuit voltage(Voc)and power conversion efficiency(PCE)of PSCs.Defect chemistry and surface passivators have been researched extensively and mainly focused on the neutralization of uncoordinated lead or anion defects.Herein,a novel brominated passivator 2-bromophenethylammonium iodide(2-Br-PEAI)is introduced for a multi-functional passivation effect at the perovskite interface.The brominated species readily form 2D perovskite on top of the 3D perovskite and multi-interact with the 3D perovskite surface.Apart from the halide vacancy filling and anion bonding ability,the Br atoms on the benzene ring can interact with the FA cations via strong hydrogen bonding N-H…Br and interact with the[PbI_(6)]^(4−)inorganic framework.The interface defects in the PSCs are well passivated,minimizing non-radiative recombination and enhancing device performance.As a result,a champion PCE of 24.22%was achieved with high V_(oc)and fill factor.In addition,modified devices also showed enhanced operational stability(retention of>95%initial PCE after 400 h)and humidity resistance(>90%initial PCE maintained after 1500 h under~50%RH).

Breeding of National Authorized New Wheat Variety Shannong 116 and Supporting Cultivation Technical Measures for High Yield, High Quality and High Efficiency

Shannong 116 is a strong gluten,high yield and multi-resistance wheat variety bred by Shandong Agricultural University,which was approved by the State in 2021 and by Shandong Province in 2022.Shannong 116 combines the excellent characteristics of the female parent(strong gluten,disease resistance and early maturity)and the male parent(high yield,water saving and lodging resistance),with a plant height of 76.9 cm,compact plant type,orderly spike layer and good maturity performance,which is suitable for large-scale promotion and market order planting in Huanghuai wheat area.In this paper,the characteristics of Shannong 116 are analyzed,and cultivation technical measures for high yield,high quality and high efficiency are put forward,in order to provide a technical support for the popularization and application of the variety.

Analyzing and Exploring a Model for High-Efficiency Perovskite Solar Cells

Perovskite materials have drawn a lot of interest recently due to their potential to increase solar cell efficiency. This study uses the solar cell capacitance simulator (SCAPS-1D) to develop and simulate a perovskite solar cell made of semiconductor materials. The design that has been suggested is Al:ZnO/ZnO/CdS/CsSnCl3 and MoS2. The analysis focuses on how different characteristics of the material affect the device’s performance. The analysis of the data reveals that the architecture had 26.15% power conversion efficiency (PCE). The solar cell creates an interest in developing a non-toxic solar cell with low manufacturing costs, outstanding conversion efficiency, and stability.

ANovel Non-Isolated Cubic DC-DC Converter with High Voltage Gain for Renewable Energy Power Generation System

In recent years,switched inductor(SL)technology,switched capacitor(SC)technology,and switched inductor-capacitor(SL-SC)technology have been widely applied to optimize and improve DC-DC boost converters,which can effectively enhance voltage gain and reduce device stress.To address the issue of low output voltage in current renewable energy power generation systems,this study proposes a novel non-isolated cubic high-gain DC-DC converter based on the traditional quadratic DC-DC boost converter by incorporating a SC and a SL-SC unit.Firstly,the proposed converter’s details are elaborated,including its topology structure,operating mode,voltage gain,device stress,and power loss.Subsequently,a comparative analysis is conducted on the voltage gain and device stress between the proposed converter and other high-gain converters.Then,a closed-loop simulation system is constructed to obtain simulation waveforms of various devices and explore the dynamic performance.Finally,an experimental prototype is built,experimental waveforms are obtained,and the experimental dynamic performance and conversion efficiency are analyzed.The theoretical analysis’s correctness is verified through simulation and experimental results.The proposed converter has advantages such as high voltage gain,low device stress,high conversion efficiency,simple control,and wide input voltage range,achieving a good balance between voltage gain,device stress,and power loss.The proposed converter is well-suited for renewable energy systems and holds theoretical significance and practical value in renewable energy applications.It provides an effective solution to the issue of low output voltage in renewable energy power generation systems.

Highly-Efficient Aerodynamic Optimal Design of Rotor Airfoil Using Viscous Adjoint Method

In order to overcome the efficiency problem of the conventional gradient-based optimal design method,a highly-efficient viscous adjoint-based RANS equations method is applied to the aerodynamic optimal design of hovering rotor airfoil.The C-shaped body-fitted mesh is firstly automatically generated around the airfoil by solving the Poisson equations,and the Navier-Stokes(N-S)equations combined with Spalart-Allmaras(S-A)one-equation turbulence model are used as the governing equations to acquire the reliable flowfield variables.Then,according to multi-constrained characteristics of the optimization of high lift/drag ratio for hovering rotor airfoil,its corresponding adjoint equations,boundary conditions and gradient expressions are newly derived.On these bases,two representative rotor airfoils,NACA0012 airfoil and SC1095 airfoil,are selected as numerical examples to optimize their synthesized aerodynamic characteristics about lift/drag ratio in hover,and better aerodynamic performance of optimal airfoils are obtained compared with the baseline.Furthermore,the new designed rotor with the optimized rotor airfoil has better hover aerodynamic characteristics compared with the baseline rotor.In contrast to the baseline airfoils optimized by the finite difference method,it is demonstrated that the adjoint optimal algorithm itself is practical and highly-efficient for the aerodynamic optimization of hover rotor airfoil.

Numerical and Experimental Investigation of High-efficiency Axial-flow Pump

The experimental investigation of axial-flow pump has been rapidly developed to meet the needs of South-to-North Water Diversion Project of China. Owing to the boundary conditions of hub, blade tip clearance, much of the physical phenomena and laws involved in this complex flow field can＇t be fully determined. The flow characteristics of the high efficiency axial-flow pump have been simulated by RNG k-e turbulence model and SIMPLEC arithmetic based on FLUENT software. Numerical results indicate that the data from the prediction show agreement with the experimental results, static pressure on pressure side of blades increases slightly at circumferential direction with radius increasing, and keep almost constant at the same radial while increasing gradually from inlet to exit on the suction side along flow direction at design conditions. The static pressure, total pressure and velocity at inlet, impeller outlet and vane outlet were measured by a five-hole probe, and a contrastive experiment was done to investigate the influence of hub leakage. The experimental results show that inlet flow is almost axial and the prerotation is very small at various conditions. The meridional velocity and circulation distribution are almost identical at impeller outlet at design conditions due to steady flow and high efficiency. The residual circulation exits at downstream of the guide vane, and the circumferential velocity component increases linearly from hub to tip at small flow rate conditions. Hub leakage in adjustable blades results in the decrease of the meridional velocity and circulation at blade exit near hub. The results of numerical simulation and experiments supply important flow structure information for the high-efficiency axial-flow pump.

Establishment of a Highly Efficient Regeneration System for the Mature Embryo Culture of Wheat

Establishment of a highly efficient regeneration system for the mature embryo of wheat will provide a convenient tool for wheat tissue culture and transformation, thereby facilitating the transformation of foreign genes into wheat. By using the mature embryos derived from 20 different wheat lines including Shi 4185, Yumai 66, Lunxuan 987, CB037, Yangmai 6, Xinchun 9, Bobwhite, Han 6172, Zheng 9023, Jimai 20, Ningchun 4, and Jing 411, the effects of some factors including inoculation methods, initiating culture media, organic additives, antioxidants, and auxins on the regeneration from the explants were evaluated. The results indicated that the scraping embryo culture was better than the whole embryo culture, the Aa medium was better than the SD2 medium and dicamba was better than 2,4-D in increasing the regeneration frequency. An Adi medium was established in this study by adding silver nitrate, cysteine, ascorbic acid, dicamba, glutamine into the Aa medium at the concentration of 4,40, 100, 2, and 5 mg L^-1, respectively. By using the Adi medium and the scraping technique, the regeneration frequencies of the mature embryos of CB037, Lunxuan 987, Hart 6172, Yangmai 6, Bobwhite, Zheng 9023, Shi 4 185, and Jimai 20 became 85.6, 60,1, 46.0, 42.1,42.0, 34.0, 33.0, and 32.0%, respectively, which were about 5-8 times higher than that obtained from the conventional culture mediums and techniques. This novel regeneration system could be helpful in wheat transformation.

Evaluation of Vaporized Hydrogen Peroxide Fumigation as a Method for the Bio-decontamination of the High Efficiency Particulate Air Filter Unit

Objective To evaluate the performance of vaporized hydrogen peroxide （VHP） for the bio-decontamination of the high efficiency particulate air （HEPA） filter unit. Methods Self-made or commercially available bioindicators were placed at designated locations in the HEPA filter unit under VHP fumigation. The spores on coupons were then extracted by 0.5 h submergence in eluent followed by 200- time violent knocks. Results Due to the presence of HEPA filter in the box, spore recovery from coupons placed at the bottom of the filter downstream was significantly higher than that from coupons placed at the other locations. The gap of decontamination efficiency between the top and the bottom of the filter downstream became narrower with the exposure time extended. The decontamination efficiency of the bottom of the filter downstream only improved gently with the injection rate of H202 increased and the decontamination efficiency decreased instead when the injection rate exceeded 2.5 g/min. The commercially available bioindicators were competent to indicate the disinfection efficiency of VHP for the HEPA filter unit. Conclusion The HEPA filter unit is more difficult than common enclosure to decontaminate using VHP fumigation. Complete decontamination can be achieved by extending fumigation time. VHP fumigation can be applied for in-situ biodecontamination of the HEPA filter unit as an alternative method to formaldehyde fumigation.

Methods on Identification and Screening of Rice Genotypes with High Nitrogen Efficiency

In order to establish methods for indentification and screening of rice genotypes with high nitrogen （N） efficiency, N absorption efficiency （NAE）, N utilization efficiency （NUE） and N harvest index （NHI） in ten rice genotypes were investgated at the elongation, booting, heading and maturity stages under six N levels in a pot experiment with soil-sand mixtures at various ratios. NAE in various rice genotypes firstly increased, peaked under a medium nitrogen rate of 0.177 g/kg and then decreased, but NUE and NHI always decreased with increasing nitrogen levels. NAE in various rice genotypes ever increased with growing process and NUE indicated a descending tendency of elongation stage〉heading stage〉maturity stage〉booting stage. N level influenced rice NAE, NUE and NHI most, followed by genotype, and the both effects were significant at 0.01 level. In addition, the interaction effects of genotype and nitrogen level on rice NAE and NUE were significant at 0.01 level, but not significant on rice NHI. Because the maximum differences of NAE and NUE were found at the elongation stage, it was thought to be the most suitable stage for identification and screening these two paremeters. Therefore, the optimum conditions for identification and screening of rice NAE, NUE and NHI in a pot experiment were the nitrogen rate of 0.157 g/kg at the elongation stage, low nitrogen at the elongation stage, and the nitrogen rate of 0.277 g/kg at the maturity stage, respectively.

Device simulation of lead-free CH_3NH_3SnI_3 perovskite solar cells with high efficiency

The lead-free perovskite solar cells(PSCs) have drawn a great deal of research interest due to the Pb toxicity of the lead halide perovskite.CHNHSnIis a viable alternative to CHNHPbX,because it has a narrower band gap of 1.3 eV and a wider visible absorption spectrum than the lead halide perovskite.The progress of fabricating tin iodide PSCs with good stability has stimulated the studies of these CHNHSnIbased cells greatly.In the paper,we study the influences of various parameters on the solar cell performance through theoretical analysis and device simulation.It is found in the simulation that the solar cell performance can be improved to some extent by adjusting the doping concentration of the perovskite absorption layer and the electron affinity of the buffer and HTM,while the reduction of the defect density of the perovskite absorption layer significantly improves the cell performance.By further optimizing the parameters of the doping concentration(1.3 × 10cm~3) and the defect density(1 × 10cm~3) of perovskite absorption layer,and the electron affinity of buffer(4.0 eV) and HTM(2.6 eV),we finally obtain some encouraging results of the Jof 31.59 mA/cm~2,Vof 0.92 V,FF of 79.99%,and PCE of 23.36%.The results show that the lead-free CHNHSnIPSC is a potential environmentally friendly solar cell with high efficiency.Improving the Snstability and reducing the defect density of CHNHSnIare key issues for the future research,which can be solved by improving the fabrication and encapsulation process of the cell.

A safe,low-cost and high-efficiency presodiation strategy for pouch-type sodium-ion capacitors with high energy density

Sodium-ion capacitors(SICs)have attracted appreciable attention in virtue of the higher energy and power densities compared with their rivals,supercapacitors and sodium-ion batteries.Due to the lack of sodium resources in cathode,presodiation is critical for SICs to further augment performances.However,current presodiation strategy utilizes metallic sodium as the presodiation material.In this strategy,assembling/disassembling of half-cells is required,which is dangerous and in creases the time and cost of SIC leading to the restriction of their industrialization and commercialization.Herein we present a safe,low-cost and high-efficiency presodiation strategy by first employing Na_(2)C_(2)O_(4) as the sacrificial salt applied in SICs.Na_(2)C_(2)O_(4) is environmentally friendly and possesses considerably low expenditure.No additional residues remain after sodium extraction ascribed to its"zero dead mass"property.When paired with commercial activated carb on as the cathode and commercial hard carbon as the ano de,the constructed pouch-type SICs exhibit high energy and power densities of 91.7 Wh/kg and 13.1 kW/kg,respectively.This work shows a prospect of realizing the safe and low-cost manufacturing for high-performance SICs commercially.

Two highly efficient accumulation models of large gas fields in China

Based on reserve abundance,large gas fields in China can be divided into two types：type one of high abundance large gas fields,dominated by structural gas reservoirs; type two of low abundance large gas fields,dominated by stratigraphic and lithologic gas reservoirs.The formation of these two types of large gas fields is related to the highly efficient accumulation of natural gas.The accumulation of high abundance gas fields is dependent on the rapid maturation of the source kitchen and huge residual pressure difference between the gas source kitchen and reservoir,which is the strong driving force for natural gas migration to traps.Whereas the accumulation of low abundance gas fields is more complicated,involving both volume flow charge during the burial stage and diffusion flow charge during the uplift stage,which results in large area accumulation and preservation of natural gas in low porosity and low permeability reservoirs.This conclusion should assist gas exploration in different geological settings.

Unraveling Passivation Mechanism of Imidazolium-Based Ionic Liquids on Inorganic Perovskite to Achieve Near-Record-Efficiency CsPbI_(2)Br Solar Cells

The application of ionic liquids in perovskite has attracted wide-spread attention for its astounding performance improvement of perovskite solar cells(PSCs).However,the detailed mechanisms behind the improvement remain mysterious.Herein,a series of imidazolium-based ionic liquids(IILs)with different cations and anions is systematically investigated to elucidate the passivation mechanism of IILs on inorganic perovskites.It is found that IILs display the following advantages:(1)They form ionic bonds with Cs^(+)and Pb^(2+)cations on the surface and at the grain boundaries of perovskite films,which could effectively heal/reduce the Cs^(+)/I−vacancies and Pb-related defects;(2)They serve as a bridge between the perovskite and the hole-transport-layer for effective charge extraction and transfer;and(3)They increase the hydrophobicity of the perovskite surface to further improve the stability of the CsPbI_(2)Br PSCs.The combination of the above effects results in suppressed non-radiative recombination loss in CsPbI_(2)Br PSCs and an impressive power conversion efficiency of 17.02%.Additionally,the CsPbI_(2)Br PSCs with IILs surface modification exhibited improved ambient and light illumination stability.Our results provide guidance for an indepth understanding of the passivation mechanism of IILs in inorganic perovskites.

High wall-plug efficiency 808-nm laser diodes with a power up to 30.1 W

A very highly efficient InGaAlAs/AlGaAs quantum-well structure was designed for 808 nm emission,and laser diode chips 390-μm-wide aperture and 2-mm-long cavity length were fabricated.Special pretreatment and passivation for the chip facets were performed to achieve improved reliability performance.The laser chips were p-side-down mounted on the AlN submount,and then tested at continuous wave(CW)operation with the heat-sink temperature setting to 25℃using a thermoelectric cooler(TEC).As high as 60.5%of the wall-plug efficiency(WPE)was achieved at the injection current of 11 A.The maximum output power of 30.1 W was obtained at 29.5 A when the TEC temperature was set to 12°C.Accelerated life-time test showed that the laser diodes had lifetimes of over 62111 h operating at rated power of 10 W.

High-efficiency forming processes for complex thin-walled titanium alloys components: state-of-the-art and perspectives

Complex thin-walled titanium alloy components play a key role in the aircraft,aerospace and marine industries,offering the advantages of reduced weight and increased thermal resistance.The geometrical complexity,dimensional accuracy and in-service properties are essential to fulfill the high-performance standards required in new transportation systems,which brings new challenges to titanium alloy forming technologies.Traditional forming processes,such as superplastic forming or hot pressing,cannot meet all demands of modern applications due to their limited properties,low productivity and high cost.This has encouraged industry and research groups to develop novel high-efficiency forming processes.Hot gas pressure forming and hot stamping-quenching technologies have been developed for the manufacture of tubular and panel components,and are believed to be the cut-edge processes guaranteeing dimensional accuracy,microstructure and mechanical properties.This article intends to provide a critical review of high-efficiency titanium alloy forming processes,concentrating on latest investigations of controlling dimensional accuracy,microstructure and properties.The advantages and limitations of individual forming process are comprehensively analyzed,through which,future research trends of high-efficiency forming are identified including trends in process integration,processing window design,full cycle and multi-objective optimization.This review aims to provide a guide for researchers and process designers on the manufacture of thin-walled titanium alloy components whilst achieving high dimensional accuracy and satisfying performance properties with high efficiency and low cost.

Highly Efficient Greenish-Yellow Phosphorescent Organic Light-Emitting Diodes Based on a Novel 2,3-Diphenylimidazo[1,2-a]Pyridine Iridium(Ⅲ) Complex

A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device exhibits a greenish-yellow emission with the peak at 523nm and a strong shoulder at 557nm, corresponding to Commission Internationale de l＇Eclairage coordinates of （0.38, 0.68）. The full width at half maximum of the device is 93 nm, which is broader than the fac-tris（2-phenylpyridine）iridium [Ir（ppy）3] based reference device of 78 nm. Meanwhile, a maximum current efficiency of 62.6 cd/A （47.51m/W） is obtained. This result is higher than a maximum current efficiency of 54.8 cd/A （431m/W） of the Ir（ppy）a based device. The results indicate that this new iridium complex may have potential applications in fabricating high color rendering index white organic light emitting diodes.