Activity and characteristics of ＂Oxygen-enriched＂ highly reactive absorbent for simultaneous flue gas desulfurization and denitrification

An ＂Oxygen-enriched＂ highly reactive absor- bent was prepared by mixing fly ash, lime and a small quantity of KMnO4 for simultaneous desulfiarization and denitrification. Removal of SO2 and NO simultaneously was carried out using this absorbent in a flue gas circulating fluidized bed （CFB）. The highest simultaneous removal efficiency, 94.5% of SO2 and 64.2% of NO, was achieved under the optimal experiment conditions. Scanning Electron Microscope （SEM） and Accessory X-ray Energy Spectrometer （EDX） were used to observe the surface characteristics of fly ash, lime, ＂Oxygen-enriched＂ highly reactive absorbent and the spent absorbent. An ion chromatograph （IC） and chemical analysis methods were used to determine the contents of sulfate, sulfite, nitrate and nitrite in the spent absorbents, the results showed that sulfate and nitrite were the main products for desulfurization and denitrification respectively. The mechanism of removing SO2 and NO simultaneously was proposed based on the analysis results of SEM, EDX, IC and the chemical analysis methods.

Durability and Micro-structure of Reactive Powder Concrete

Durability of traditional reactive powder concrete （RPC） with rich cement and high volume of fly-ash reactive powder concrete （FRPC） were studied. The X-diffraction and scanning electron microscope （SEM） measurement was imployed to analyze the microstructure. The results show that both types of RPC have higher compressive strength, less volume shrinkage ratio and better carbonation-, chloride-, freezing-resistances than the conventional concrete. The results of X-diffraction indicate that they basically have C-S-H as the main composition without Ca（OH）2 crystal and ettringite. SEM results show that hydration products of FRPC is mainly Ⅲ-C-S-H which is piled up closely like densely arranged stone body and it has very compacted structure, in addition, Ca/Si ratio of C-S-H gel is lower than 1.5.

Study of the Corrosion of High Alumina Refractories by Al_2O_3-CaO Slag as a Reactive Impregnation Mechanism

The corrosion of refractories results from reactive transport,namely,transport of agents and chemical reactions of these agents with impregnated medium. On one hand,the transport involves either diffusion or impregnation depending on the state of the corrosive agents and the microstructure of the host media. On the other hand,chemical reactions may be very numerous and complex.This study focused on the reactive impregnation of Al2O3- CaO slag into porous high alumina refractory. The transport properties of the refractory material were identified by means of a dedicated capillary rising test. Chemical reactions between the solid high alumina skeleton and Al2O3- CaO slag involve successive dissolution / precipitation mechanisms forming aluminates of lime. Contrary to the thermodynamic properties of the binary system,the kinetics of these solid / liquid reactions is not well known.Corrosion tests associated with the quenching method,XRD analyses were performed for a better understanding of the kinetics. The results of this study open up a coupling approach for predicting the corrosion wear of refractory.

Iron/aluminum nanocomposites prepared by one-step reduction method and their effects on thermal decomposition of AP and AN

Aluminum(Al)powder is widely used in solid propellants.In particular,nano-Al has attracted extensive scholarly attention in the field of energetic materials due to its higher reactivity than micro-Al.However,the existence of aluminum oxide film on its surface reduces the heat release performance of the aluminum powder,which greatly limits its application.Hence,this paper used iron,a component of solid propellant,to coat micron-Al and nano-Al to improve the heat release efficiency and reactivity of Al powder.SEM,TEM,EDS,XRD,XPS,and BET were used to investigate the morphological structure and properties of pure Al and Fe/Al composite fuels of different sizes.The results show that Fe was uniformly coated on the surface of Al powder.There was no reaction between Fe and Al,and Fe/Al composite fuels had a larger specific surface area than pure Al,which could better improve the reactivity of pure Al.Besides,the catalytic effects of pure Al and Fe/Al composite fuels of different sizes on ammonium perchlorate and ammonium nitrate were explored.The results show that the catalysis of pure Al powder could be greatly improved by coating Fe on the surface of Al powder.Especially,the micron-Fe/Al composite fuel had a higher catalytic effect than the pure nano-Al powder.Hence,Fe/Al composite fuels are expected to be widely used in solid propellants.

Fabrication of alginate-based microspheres with cellular structure for tuning ammonium dinitramide performance

Recently,an emerging category green of energetic material ammonium dinitramide(ADN)has exhibited promising application in propellants due to its outstanding merits in energy release and environmental friendliness.It can be considered to substitute traditional oxidizer of ammonium perchlorate(AP)in military systems and aerospace.In this paper,a novel spherical energetic composite ADN/copper alginate(CA)with a microporous structure was designed and prepared by the W/O gel emulsion method,and a desirable porous microsphere structure was obtained.Multiple characterization techniques were used to investigate the structure and properties of ADN/CA composites.The results showed that ADN crystals were homogeneously encapsulated in an alginate-gel matrix.Thermal decomposition temperature was reduced to 151.7℃compared to ADN,while the activation energy of them was reduced from 129.73 k J/mol(ADN)to 107.50 k J/mol(ADN/CA-4).In addition,as-prepared samples had lower impact and frictional sensitivity than ADN.The mechanism of sensitivity reduction and decomposition are also discussed.Constant-volume combustion tests show that peak pressure of the ADN/CA-4 achieves 253.4 k Pa and pressurization rate of 2750.4 k Pa/s.Hence,this has a promising application in improving the combustion performance and safety performance of solid propellants.

Self-glazing SiC-andalusite Refractories for High Temperature Gasification Applications

The combination of SiC and andalusite with calcium aluminate binder for castables in high corrosive gasifying environments is a promising alternative refractory system for many different slag systems. After sintering,a glassy protective layer has been identified. Beside the interactions of the refractories with intermediate slag also the thermomechanical properties,the thermal shock performance and the microstructure have been evaluated as a function of different binder systems.

Urotensin Ⅱ level is elevated in inflammatory bowel disease patients

It was reported that the urotensin Ⅱ(U-Ⅱ) level in inflammatory bowel disease(IBD) patients are significantly higher than in controls. To provide future guidance for the management of cardiovascular risk factors in IBD patients, the sample size of the current study appears to be limited, and more clinical samples to compare U-Ⅱ levels in IBD patients and controls are needed. This will clarify the possible roles of inflammation factors and related signaling pathways(like EPK1/2, NF-κB and Rho/ROCK) in the pathophysiology of IBD. Therefore, large multicenter studies should be done to confirm the findings and underlying mechanisms in the future.

An Observational Study of the Relationship Between Outcome and Platelet Reactivity in Chinese Patients Undergoing PCI Loading with 600 mg Clopidogrel

Objectives:We sought to determine whether high posttreatment platelet reactivity(HPPR)to a 600 mg loading dose of clopidogrel affects outcomes in Chinese patients with acute coronary syndrome(ACS)following percutaneous coronary intervention(PCI)and to investigate whether there is a relationship between the number of platelet reactivity units(PRUs)and the characteristics of the patients.Background:Although impaired platelet response to clopidogrel is a strong predictor of unfavorable outcome after PCI,the impact of HPPR to a 600 mg loading dose of clopidogrel in Chinese patients with ACS undergoing PCI is still unknown.Methods:We performed observational research on 134 unselected patients with ACS undergoing urgent or planned PCI with a 600 mg loading dose of clopidogrel.Platelet activation was expressed as the PRU value measured by the VerifyNow assay.Results:Among the 134 patients(mean age 60.62 years[standard deviation 9.13 years],60.4%male),there were 46 patients with HPPR(34.3%)and 88 patients without HPPR(65.7%).At a mean follow-up of 6 months(standard deviation 1 month),the rates of cardiac death,unstable angina,and rehospitalization for target lesion revascularization were higher in the HPPR group(19.6%vs.6.8%,P=0.029).Multivariate analysis identifi ed hemoglobin level and sex as independent predictors of the PRU value(y=456.355−1.736 x 1−31.880 x 2,P<0.05).On receiver operating characteristic curve analysis,PRU values could signifi cantly discriminate between patients with and patients without cardiac death,unstable angina,and rehospitalization for target lesion revascularization(area under the curve 0.758,95%confi dence interval 0.62–0.85,P=0.001,P<0.05).Conclusion:In patients with ACS,HPPR to a 600 mg loading dose of clopidogrel is associated with worse outcomes after PCI.There is some relationship between the PRU value and the hemoglobin level and sex.PRU values can predict the prognosis.

Colloidal Silica Sol Bonded Castables for High Temperature Applications

A colloidal silica sol bonded product range is introduced by an example targeting high temperature applications in steel making. Placement and setting characteristics are shown. The thermal mechanical properties and resulting advantages are presented as well as the performance enhancement in corrosion resistance. Properties are compared to a common ULCC product. Results of the industrial trial phase are discussed.

Revisiting the sodium-ion storage capability of hard carbon in carbonate-based electrolytes via a sodium-metal-free protocol

Common evaluation methodology of sodium(Na)-containing two-electrode or three-electrode configurations overlooks the interference from highly reactive Na metal,leading to the underestimation or inconsistent performance of low-potential hard carbon(HC)electrodes.Herein,the trap of Na metal was systematically investigated with or without applied current,uncovering its inadequacy as the reference or counter electrode in different configurations.A Na-metal-free three-electrode protocol is proposed for evaluating the actual Na^(+)-storage capability of the typical low-potential HC electrode.By avoiding Na crosstalk and precisely controlling the working electrode's potential,the actual electrochemical performance of HC in the carbonate esterbased electrolyte can be recognized with high capacity of 222 mAh g^(-1)at 2 C and 113 mAh g^(-1)at 5 C,correcting the misunderstanding of the inferior performance of HC in coin-type half cells(68%and 50%undervaluation at 2 C and 5 C,respectively).The advanced protocol is expected to reduce misunderstandings or underestimation due to evaluation methods and to guide the development of high-performance battery materials.

MASS PRODUCTION OF NANOPARTICLES BY HIGH GRAVITY REACTIVE PRECIPITATION TECHNOLOGY WITH LOW COST

Mass production of nanoparticles at low cost has attracted much attention from industrial and academic circles. In this paper, a novel method, the high gravity reactive precipitation (HGRP) technology, of manufacturing CaCO3 nanoparticles, presently scaled-up to an annual capacity of 10,000 tons, is presented. This paper describes the process principle, the process design and experiments on the syntheses of 15-30 nm CaCO3, 30-50 nm SiO2, 20-30 nm TiO2, 20-60 nm ZnO, 20-30 nm ZnS, 30 nm SrCO3, 40-70 nm BaTiO3, stick-like nano BaCO3 as well as nano-fibrillar aluminum hydroxide measuring 1-10 nm in diameter and 50-300 nm in length, using liquid-liquid, gas-liquid and gas-liquid-solid reactant systems. The advantage of using the HGRP technology is illustrated by comparison to conventional methods.

Combining innovative science and policy to improve air quality in cities with refining and chemicals manufacturing： The case study of Houston, Texas, USA

In Houston, a combination of urban emissions from a city of 4 million people, coupled with emissions from extensive petroleum refining and chemical manufacturing, leads to conditions for photochemistry that are unique in the United States, and historically, the city had experienced some of the highest ozone concentrations recorded in the United States. Large air quality field studies （the Texas Air Quality Studies or TexAQS I and II） were conducted to determine root causes of the high ozone concentrations. Hundreds of air quality investigators, from around the world, deployed instruments on aircraft, on ships, and at fixed ground sites to make extensive air quality measurements; detailed photochemical modeling was used to interpret and assess the implications of the measurements. The Texas Air Quality Studies revealed that both continuous and episodic emissions of light alkenes, which came to be called highly reactive volatile organic compounds, played a critical role in the formation of ozone and other photochemical oxidants in the region. Under- standing and quantifying the role of these emissions in regional air quality required innovations in characterizing emissions and in photochemical modeling. Reducing emissions required innovative policy approaches. These coupled scientific and policy innovations are described, and the result, substantially cleaner air for Houston, is documented. The lessons learned from the Houston air quality experience are relevant to cities with similar population and industrial profiles around the world.

CO_2 Gasification Characteristics of High and Low Reactivity Cokes

In order to effectively utilize the high reactivity coke, the gasification characteristics of high and low reactivity cokes were investigated at 1100 ℃. Low reactivity coke A and high reactivity coke B were chosen and charged into the reaction tube in two methods. The results indicated that the mass loss ratio of high reactivity coke in mixed cokes was more significant than that of single high reactivity coke in the middle stage of reaction. Nevertheless, the mass loss ratio of low reactivity coke in mixed cokes was less than that of single low reactivity coke. It was mainly attributed to gas diffusion and internal reaction of coke. When high and low reactivity cokes were mixed, the practical average mass loss ratio was nearly the same as the weighted average. The microscopic structures of coke indicated that with the increase of reaction time, the external and internal layers of low reactivity coke reacted more uniformly with CO2, whereas the reaction degree of external layer of high reactivity coke was obviously higher.