Study on the disaster caused by the linkage failure of the residual coal pillar and rock stratum during multiple coal seam mining:mechanism of progressive and dynamic failure

Multi-seam mining often leads to the retention of a significant number of coal pillars for purposes such as protection,safety,or water isolation.However,stress concentration beneath these residual coal pillars can significantly impact their strength and stability when mining below them,potentially leading to hydraulic support failure,surface subsidence,and rock bursting.To address this issue,the linkage between the failure and instability of residual coal pillars and rock strata during multi-seam mining is examined in this study.Key controls include residual pillar spalling,safety factor(f.),local mine stiffness(LMS),and the post-peak stiffness(k)of the residual coal pillar.Limits separating the two forms of failure,progressive versus dynamic,are defined.Progressive failure results at lower stresses when the coal pillar transitions from indefinitely stable(f,>1.5)to failing(f,<1.5)when the coal pillar can no longer remain stable for an extended duration,whereas sud-den(unstable)failure results when the strength of the pillar is further degraded and fails.The transition in mode of failure is defined by the LMS/k ratio.Failure transitions from quiescent to dynamic as LMS/k.<1,which can cause chain pillar instability propagating throughout the mine.This study provides theoretical guidance to define this limit to instability of residual coal pillars for multi-seam mining in similar mines.

A Study on the Interest Linkage Mechanism of the Taxus Industry Chain in Pengshui Miao and Tujia Autonomous County

At the Taxus base of Pengshui Miao and Tujia Autonomous County,Chongqing,the comprehensive development and utilization of Taxus was carried out with seedling cultivation,understory economy,product processing,ecotourism and other aspects as the main line.The benefit linkage mechanism of the operation of the Taxus industrial chain was explored and analyzed,so as to extend and supplement the Taxus industrial chain.The two models of"company+farmer"and"company+village collective+farmer"are relatively close benefit linkage models,which indirectly promote the increase of farmers income and smoothly guarantee the operation of the industrial chain,thereby playing a positive role during the development of the Taxus industry.This study provides reliable countermeasures and suggestions for the sustained and healthy development of the Taxus industry in Pengshui County.

Macro-micro behaviors and failure mechanism of frozen weakly cemented mudstone

Understanding the mechanical properties and multiscale failure mechanism of frozen soft rock is an important prerequisite for the construction safety of tunnels,artificially frozen ground and other infrastructure in cold regions.In this study,the triaxial compression test are performed on mudstone in the weakly cemented soft rock strata in the mining area of western China,and the mechanical characteristics and failure mechanism of weakly cemented mudstone are systematically investigated under the combined action of freezing and loading.Furthermore,the quantitative relationship between the microstructural parameters and the macroscopic strength and deformation parameters is established based on fractal theory.Thus,the failure mechanism of frozen weakly cemented mudstone is revealed on both micro- and macro-scales.The results show that temperature and confining pressure significantly affects the elastic modulus and peak strength of weakly cemented mudstone.With decreasing temperature,the compressive strength increases,while the corresponding peak strain decreases gradually.On the deformation curve,the plastic deformation stage is shortened,and the brittle fracture feature at the post-peak stage is more prominent,and the elastic modulus correspondingly increases with decreasing temperature.Under low-temperature conditions,most of the weakly cemented mudstone undergoes microscopic shear failure along the main fracture surface.The micro-fracture morphology characteristics of weakly cemented mudstone under different temperatures are quantified via the fractal dimension,and an approximately exponential relationship can be obtained among the fractal dimension and the temperature,compressive strength and elastic modulus.

Driving Torque Reduction in Linkage Mechanisms Using Joint Compliance for Robot Head

The conventional linkage mechanisms with compliant joint have been widely studied and implemented for increasing the adaptability of the mechanism to external contacts. However, the analysis of how compliant joints in linkage mechanism can reduce the energy consumption isn＇t still studied deeply. In a mobile service robot head, the actions of blinking the eyes and moving the eyeballs are realized by the planar linkage mechanism respectively. Therefore, minimizing the driving torques through motion trajectories for the linkage mechanism, which will be beneficial to extend the working time for mobile service robots. The dynamic modeling of the linkage mechanism with springs-loaded compliant joint is established. An optimization procedure for obtaining the optimal parameters of springs is proposed for minimizing the max value of driving torques within a range of desired operating conditions. The Simulations prove that the linkage mechanism with compliant joints can effectively reduce the driving torques, and reduce the energy consumption consequently. The framework can also be applied in other similar applications to reduce the driving torque and save energy. Compared with previous efforts, this is the first attempt that the linkage mechanism with complaint joint is applied in the robot head for reducing the driving torque.

Modeling and Optimal Design of Planar Linkage Mechanism of Coupled Joint Clearances for Manufacturing

The uncertainty of the mechanism motion error is mostly caused by the manufacturing process,so the motion error cannot be effectively predicted at the design phase.The problems of manufacturing complexity and the relationship between design and manufacturing are analyzed,and the influence of dimensional tolerance and fit tolerance on the motion accuracy of the system is considered in the design process.Then based on the Monte Carlo simulation,an optimal design model of planar linkage mechanism is set up.A typical offset slider-crank mechanism is used as an illustrative example to carry out the optimal design.Compared with the result of typical robustness design,the similar variation characteristics of the mean value and the standard deviation can be found,so the proposed method is effective.The method is furthermore applied in the optimization of the schemes with different fit tolerances and the prediction of motion errors in the design phase is achieved.A set of quantitative evaluation system for mechanism optimal design is provided.Finally,a basic strategy is presented to balance the motion precision and manufacturing cost.

CONJUGATE CAM WITH FIVE-BAR LINKAGE MECHANISM FOR RAPIER DRIVE OF FLEXIBLE RAPIER LOOMS

A new type of rapier drive for flexible rapier loom through conjugate cams with five-bar linkage mechanism is raised and analyzed. Two designs suitable for the conversion of 1515-190.5 shuttle looms are given as examples. This mechanism can be applied to traditional shuttle looms as well as to new flexible rapier loom design.

A reconfigurable tracked mobile robot based on four-linkage mechanism

A novel reconfigurable tracked robot based on four-link mechanism was proposed and released for the complicated terrain environment. This robot was modularly designed and developed, which is composed of one suspension and one pair of symmetrical deployed reconfigurable track modules. This robot can implement multiple locomotion configurations by changing the track configuration, and the geometric theory analysis shows that the track length keeps constant during the process of track reconfiguration. Furthermore, a parameterized geometric model of the robot was established to analyze the kinematic performance of the robot while overcoming various obstacles. To investigate the feasibility and correctness of design theory and robot scheme, an example robot was designed to climb 45° slopes and 200 mm steps, and a group of design parameters of the robot were determined. Finally, A prototype of this robot was developed, and the test results show that the robot own powerful mobility and obstacle overcoming performance, for example, running across obstacle like mantis, extending to stride over entrenchment, standing up to elevate height, and going ahead after overturn.

Research and Application for the Regularity of Distribution about Curvature Radius and Curvature Center of the Linkage Point Track in a Link Mechanism

It is illustrated that there exists an inflection circle on the linkage rigid body by the principle of relative motion. Confirmed methods of the inflection circle, curvature radius and curvature center of the point track on the linkage rigid body are given in the case of the different contact type of move instantaneous center line and static instantaneous center line. The regularity of distribution of curvature radius and curvature center of the point track is researched. The identification methods called determination parameters and auxiliary vertical line of the diameter and direction of the inflection circle in the four bar mechanism are pointed out. A design method of the crane hoisting mechanism is discussed in the end of this paper.

Dynamic Modeling of Variable Stiffness and Damping for Spatial Linkage Weft Insertion Mechanism with Clearance

In order to further analyze the influence of clearance on the kinematic performance of spatial linkage weft insertion mechanism,it is necessary to study the dynamic characteristics of contact impact force model with the variable stiffness and damping coefficient.Firstly,the parameters in the output process of the system are solved by describing of the flexible joint clearance.Then,based on Lankarani-Nikravesh contact force model,the contact impact stiffness and damping coefficient is modified from fixed values to time-varying coefficients.The dynamic model of spatial linkage weft insertion mechanism with modified clearance is established by Lagrange method,and the dynamic characteristics of the system are calculated.The results show that the joint clearance can directly affect the output performance of the mechanism.With the increase of the clearance value,the curve fluctuations of acceleration,driving torque and collision force are obvious,and it will be further intensified with the increase of spindle speed,which greatly affects the stability of mechanism and fabric quality.Finally,the virtual prototype is established by the SolidWorks software and simulated by the ADAMS software.The simulation results are compared with the numerical results,which verifies the accuracy of the modeling method in this paper.

An Underactuated Linkage Finger Mechanism for Hand Prostheses

The underactuated fingers used in numerous robotic systems are evaluated by grasping force, configuration space, actuation method, precision of operation, compactness and weight. In consideration of all such factors a novel linkage based underactuated finger with a self-adaptive actuation mechanism is proposed to be used in prosthetics hands, where the finger can accomplish flexion and extension. Notably, the proposed mechanism can be characterized as a combination of parallel and series links. The mobility of the system has been analyzed according to the Chebychev-Grübler-Kutzbach criterion for a planar mechanism. With the intention of verifying the effectiveness of the mechanism, kinematics analysis has been carried out, by means of the geometric representation and Denavit-Hartenberg (D-H) parameter approach. The presented two-step analysis followed by a numerical study, eliminates the limitations of the D-H conversion method to analyze the robotics systems with both series and parallel links. In addition, the trajectories and configuration space of the proposed finger mechanism have been determined by the motion simulations. A prototype of the proposed finger mechanism has been fabricated using 3D printing and it has been experimentally tested to validate its functionality. The kinematic analysis, motion simulations, experimental investigations and finite element analysis have demonstrated the effectiveness of the proposed mechanism to gain the expected motions.

Research on the Linkage Mechanism between Essential Medicine List and Healthcare Insurance List

Objective: To put forward suggestions to improve the linkage mechanism between China’s essential medicine list and healthcare insurance medicine list. Methods: Comparative study of the organization setting, selection criteria, adjustment procedures, and reimbursement of essential medicine list and healthcare insurance medicine list, containing both the foreign experience and China’s status quo. Results: When two lists exist at the same time, they are often managed separately abroad, setting more selection criteria for the essential medicine, and giving the essential medicine a higher payment ratio. The two lists in China are managed and adjusted separately, but lack of connection. As a result, some essential medicines cannot be reimbursed. Conclusion: The two lists’ linkage mechanism needs to be improved. It is recommended to make it clear that essential medicines should be selected from the healthcare insurance medicine list, and enhance the consistency of medicine evaluation through mutually scientific evidence.

ACCURACY ANALYSIS FOR PLANAR LINKAGE WITH MULTIPLE CLEAR-ANCES AT TURNING PAIRS

Clearance at turning pair has a strong impact on the kinetic accuracy of linkage, but there is short of a generic model to analyze it so far. Clearance error, input error, and manufacturing tolerance of links are taken into consideration as the random variables synthetically. The kinematics and dynamics accuracy analysis models for planar linkages with multiple clearances at joints are built up as well. At last a typical planar linkage is selected for nurnerical illustration. These models stated in matrix resolve the relativity of output parameter errors of mechanism and therefore are of vital significance for the reliability analysis and synthesis of mechanism with clearances.

Simulation and Analysis of Spatial Weft Insertion Mechanism Considering Flexibility and Clearance

A 3D model of the spatial four-bar weft insertion mechanism was built with unigraphics NX(UG) according to the actual requirement,and dynamics simulation was carried out by importing the model into ADAMS.Without considering the clearance,the motion characteristic curve of the sword belt was generated through ADAMS combined with MATLAB.In this paper the hinge between the rod and the sector gear was selected as an example with different values of clearance,outputting the motion characteristic curve of the sword belt.Finite element analysis(FEA)was conducted,the flexible body was generated by importing the forked frame into ANSYS,and flexible dynamics simulation was carried out by importing the flexible body into ADAMS to replace the rigid rod.A comprehensive comparison of the output characteristics of the sword belt was conducted in the consideration of the clearance or flexible.Analysis of the force on the left hinge of the rod was carried out with the ADAMS post processing module.With the same clearance,considering the flexibility,amplitude of fluctuation of the force on the hinge increased obviously.

Dynamic Analysis of Four-Bar Beating-up Mechanism with Joint Clearance

For the four-bar beating-up mechanism of air-jet loom,the plain bearing of linkage is the bearing with dynamic load,and is immersed in the lubricant-box.If the joint clearance is considered,the research on linkage movement could be very complicated.In this paper,the kinematic characteristics of four-bar beating-up mechanism with joint clearance were studied by analyzing the trace of journal center and the balance of radial,tangential forces,and bearing load.The region of principal vibration and its forming causes were discussed.And the results could interpret the measuring curves of four-bar beating-up mechanism completely.

THE EXTENDING OF JOUKOWSKY'S LEVER METHOD AND ITS APPLICATIONS IN LINKAGE PROBLEMS

Joukowsky’s Lever Method is the method used to find out the equilibrant and balancingmoment of various mechanisms.The advantage of this method is to save the complicated processof finding out the reactional forces in kinematic pairs.But,the method is only limited to thosemechanisms composed of rigid bar linkages and with negligible friction.In practical cases,hydropneumatic elements and spring constraints may be included in the mechanism;and alsowith the development of high load,high speed and high accuracy of mechanism,the friction maynot be neglected.So,the authors have tried to develop the Generalized Joukowsky’s LeverMethod,which can be used to find out the equilibrant and balancing moment of the mechanismwhen the hydropneumatic elements and spring constraints are included and the friction inkinematic pairs has to be considered.Three examples are here analyzed to show the applicationsof this method.

CALCULATION OF NATURAL FREQUENCIES FOR THE PLANAR SIX-BAR LINKAGE OF WATT TYPE

By using transfer matrix,the lower-order natural frequencies of the Watt type planar six-barlinkage are calculated in this paper.The experiment of the modal analysis is done with the SignalProcessor 7T17S,and the experiment results agree with the calculated ones.This method only re-quires calculation of lower-order transfer matrix and determinant values,so that, it can be done ona minicomputer such as IBM/PC.The method adopted in this paper is also suitable for vibrationanalysis of other types of linkages.

Development of a cable-driven redundant space manipulator with large bending angle by combining quaternion joints and segmented coupled linkages mechanism

A cable-driven redundant manipulator has significant potential in confined space applications, such as environmental exploration, equipment monitoring, or maintenance. A traditional design requires 3N driving motors/cables to supply 2N degrees of freedom(DOF) movement ability.The number of motors is 1.5 times that of the joints’ DOF, increasing the hardware cost and the complexity of the kinematics, dynamics, and control. This study develops a novel redundant space manipulator with decoupled cable-driven joints and segmented linkages. It is a 1680 mm continuum manipulator with eight DOF, consisting of four segmented linkages driven by eight motors/pairs of cables. Each segment has two equivalent DOF, which are realized by four quaternion joints synchronously driven by two linkage cables. The linkage cables of adjacent joints are symmetrically decoupled and offset at 180°. This design allows equal-angle movement of all the joints of each segment. Moreover, each decoupling driving mechanism is designed based on a pulley block composed of two fixed and movable pulleys. The two movable pulleys realize the opposite but equidistant motions of the two driving cables, i.e., pulling and loosening, assuring symmetrical movements of the two driving cables of each segment. Consequently, the equivalent 2N-DOF joints are driven only by 2N motors, significantly reducing the hardware cost and simplifying the mapping relationship between the motor angle/cable length and the joint angle. Furthermore, the bending range of each segment could reach 360°, which is three times that of a traditional design. Finally, a prototype has been developed and experimented with to verify the performance of the proposed mechanism and the corresponding algorithms.

Zenith pass tracing of the inter-satellite linkage antenna

The inter-satellite linkage antenna of the user satellite uses the Elevation-over-Azimuth type,and the zenith pass problem occurs during tracing TDRS. Firstly,the movement laws of the inter-satellite linkage is introduced for predicting the movement of the user satellite antenna. Then,the potential zenith pass moment is analyzed in detail. Some special orbits for the user satellite that can avoid the blindness zone are obtained. Finally,the zenith pass tracing strategies for the user satellite antenna based on the mechanical tilting are designed by using the trajectory preprocessor. The designs are based on the predicting results of the movement laws of the inter-satellite linkage. The strategies are proved to be reasonable and feasible for solving the zenith pass problem by simulation.

FURTHER RESEARCH ON THE SPLINE MODEL METHOD OF KED ANALYSIS IN A PLANAR FLEXIBLE LINKAGE

This paper relates to the deep research on the Splinc Model Method of KED analysis. With the use of cubic B-splinc function as a link’s transverse deflection interpolation function, the principle of virtual displacement is presented as a basic theory for the general formulation of the equations of motion, and thus abandoned the kinematic assumption and the instantaneous structure assumption which arc used in the Spline Model Method. In thc same time, the nonlinear terms sue as coupling terms between thc rigid body motion and elastic deformation arc included. New member’s spline models are established. Mass matrix, Coriolis mass matrix, normal and tangential mass matrix, linear stiffness matrix, nonlinear stiffness matrix and rotation matrix arc derived. The kinematic differential equations of a member and system are deduced in the end. The Newmark direct integration method is used as the solution scheme of the kinematic differential equations to get the periodic response.