Oversampling sigma–delta(Σ–Δ)analog-to-digital converters(ADCs)are currently one of the most widely used architectures for high-resolution ADCs.The rapid development of integrated circuit manufacturing processes h...Oversampling sigma–delta(Σ–Δ)analog-to-digital converters(ADCs)are currently one of the most widely used architectures for high-resolution ADCs.The rapid development of integrated circuit manufacturing processes has allowed the realization of a high resolution in exchange for speed.Structurally,theΣ–ΔADC is divided into two parts:a front-end analog modulator and a back-end digital filter.The performance of the front-end analog modulator has a marked influence on the entireΣ–ΔADC system.In this paper,a 4-order single-loop switched-capacitor modulator with a CIFB(cascade-of-integrators feed-back)structure is proposed.Based on the chosen modulator architecture,the ASIC circuit is implemented using a chartered 0.35μm CMOS process with a chip area of 1.72×0.75 mm^2.The chip operates with a 3.3-V power supply and a power dissipation of 22 mW.According to the results,the performance of the designed modulator has been improved compared with a mature industrial chip and the effective number of bits(ENOB)was almost 18-bit.展开更多
基金funded by the Major Emerging Industrial Projects of Anhuithe Postdoctoral Project from Hefei
文摘Oversampling sigma–delta(Σ–Δ)analog-to-digital converters(ADCs)are currently one of the most widely used architectures for high-resolution ADCs.The rapid development of integrated circuit manufacturing processes has allowed the realization of a high resolution in exchange for speed.Structurally,theΣ–ΔADC is divided into two parts:a front-end analog modulator and a back-end digital filter.The performance of the front-end analog modulator has a marked influence on the entireΣ–ΔADC system.In this paper,a 4-order single-loop switched-capacitor modulator with a CIFB(cascade-of-integrators feed-back)structure is proposed.Based on the chosen modulator architecture,the ASIC circuit is implemented using a chartered 0.35μm CMOS process with a chip area of 1.72×0.75 mm^2.The chip operates with a 3.3-V power supply and a power dissipation of 22 mW.According to the results,the performance of the designed modulator has been improved compared with a mature industrial chip and the effective number of bits(ENOB)was almost 18-bit.
文摘本文针对嵌入式应用中PWM(Pulse-WidthModulation)方式DAC(Digita-l to-Analog Converter)和独立DAC芯片选择问题,提出了通过插值方式和多PWM组合方式提高PWM方式DAC分辨率的方法;分析了PWM信号频谱,提出了模拟滤波器设计原则与方法.以MCU(Micro Control Unit)的PWM通道方式实现DAC,经过数据分析证明此方法稳定可靠.
