Impacts of bus holding strategy on the performance and pollutant emissions of a two-lane mixed traffic system

This paper investigates the impacts of a bus holding strategy on the mutual interference between buses and passenger cars in a non-dedicated bus route,as well as the impacts on the characteristics of pollutant emissions of passenger cars.The dynamic behaviors of these two types of vehicles are described using cellular automata(CA)models under open boundary conditions.Numerical simulations are carried out to obtain the phase diagrams of the bus system and the trajectories of buses and passenger cars before and after the implementation of the bus holding strategy under different probabilities of passenger cars entering a two-lane mixed traffic system.Then,we analyze the flow rate,satisfaction rate,and pollutant emission rates of passenger cars together with the performance of a mixed traffic system.The results show that the bus holding strategy can effectively alleviate bus bunching,whereas it has no significant impact on the flow rate and pollutant emission rates of passenger cars;the flow rate,satisfaction rate,and pollutant emission rates of passenger cars for either the traffic system or for each lane are influenced by the bus departure interval and the number of passengers arriving at bus stops.

Characterization of Hydroxyapatite Extracted from Crab Shell Using the Hydrothermal Method with Varying Holding Times

Hydroxyapatite(HA)is a bio ceramic commonly utilized in bone tissue engineering due to its bioactive and osteoconductive properties.Crab shells are usually disregarded as waste material despite their significant CaCO_(3) content,and have not been widely utilized in the synthesis of HA.This study aims to synthesize and analyze HA derived from crab shells using the hydrothermal method with different durations of holding time.This study utilized precipitated calcium carbonate(PCC)derived from crab shells.With a hydrothermal reactor set at 160℃ and varying holding times of 14(HA_14),16(HA_16),and 18(HA_18)h,a PCC and(NH4)2HPO4 mixture was used to synthesize HA.The synthesis results were analyzed using scanning electron microscopy(SEM),fourier transform infrared spectroscopy(FTIR),and X-ray diffraction(XRD)tests.This study has accomplished the synthesis of HA from crab shells.Nonetheless,the final product of synthesis still contained CaCO_(3) as an impurity.The prolonged hydrothermal holding time of 14 to 18 h resulted in a reduction of impurities while increasing the percentage of crystal weight and crystallite size of HA.Specimen CH_18 is the best-quality product generated in this study.This specimen produced HA with the highest percentage of crystal weight and crystallite size compared to the other specimens.Furthermore,specimen CH_18 exhibited the lowest concentration of impurities.The Ca/P ratio in this specimen was also the closest to 1.67.The Ca/P ratio,crystallite size,and crystal weight percentage of this specimen are 1.54,19.06 nm,and 99.1%,respectively.

CAFIU holds a Webinar on the New Vision of China-Bosnia and Herzegovina Cooperation and Role of Civil Society

On January 17,the Chinese Association for International Understanding(CAFIU)and the Association of Bosnia-China Friendship co-hosted the webinar themed New Vision of China-Bosnia and Herzegovina Cooperation and Role of Civil Society.

China holds the secretariat of ISO/TC 341 on heat supply network

The inauguration of the secretariat of ISO/TC 341,Heat supply net work,was held in Beijing on April 11.China Urban Construction Design&Research Institute,a subordinate enterprise of China Construction Technology Consulting Co.,Ltd.(CCTC),holds the secret ariat,which is China’s first ISO secretariat for standardization in the field of housing and urban-rural development.

Effect of sintering temperature and holding time on structure and properties of Li_(1.5)Ga_(0.5)Ti_(1.5)(PO_4)_(3)electrolyte with fast ionic conductivity

Li_(1.5)Ga_(0.5)Ti_(1.5)PO_(4))_(3)(LGTP)is recognized as a promising solid electrolyte material for lithium ions.In this work,LGTP solid electrolyte materials were prepared under different process conditions to explore the effects of sintering temperature and holding time on relative density,phase composition,microstructure,bulk conductivity,and total conductivity.In the impedance test under frequency of 1-10^(6) Hz,the bulk conductivity of the samples increased with increasing sintering temperature,and the total conductivity first increased and then decreased.SEM results showed that the average grain size in the ceramics was controlled by the sintering temperature,which increased from(0.54±0.01)μm to(1.21±0.01)μm when the temperature changed from 750 to 950°C.The relative density of the ceramics increased and then decreased with increasing temperature as the porosity increased.The holding time had little effect on the grain size growth or sample density,but an extended holding time resulted in crack generation that served to reduce the conductivity of the solid electrolyte.

Perspectives for delivery of therapeutics by extravasation of biodegradable microspheres in the brain

Development of therapeutics for brain diseases has remained challenging,in particular due to the difficulty of passing the blood-brain barrier.As a result,the current arsenal of therapeutics targeting the brain is limited to small,lipid-soluble drugs and there is a lack of options for treating neuroblastomas,Alzheimer’s disease,and many other devastating pathologies.Despite the advances in strategies for crossing the blood-brain barrier such as the use of nanoparticles(Hersh et al.,2022;Duan et al.,2023),such delivery systems have not yet reached clinical practice.Therefore,novel platforms for the transport of therapeutics across the blood-brain barrier remain highly desired.This specifically holds for large molecules such as monoclonal antibodies and recombinant proteins,as well as nucleotide-based therapeutics and cell therapies.Research efforts in this field are increasing exponentially,with thousands of publications in the last few years.

Insights from the Second Tibetan Plateau Scientific Expedition: Unveiling the westerly–monsoon synergy and hydroclimate changes

The Tibetan Plateau(TP),often referred to as the“Asian Water Tower”,holds vast reserves of glaciers,snow,and permafrost,serving as the crucial source for major rivers that support billions of people across Asia.The TP’s unique geographical positioning fosters significant interplay between the westerly and monsoon systems,the hydroclimate changes on the TP and its interactions with these two major atmospheric circulation systems through both the thermodynamic and dynamic processes,as well as the atmospheric water cycle of the TP.These interactions have far-reaching impacts on the weather and climate of China,Asia,and even the global atmospheric circulation.

Application of Deep Inspiration Breath Hold Technique in Radiotherapy After Breast- Conserving Surgery for Left Breast Cancer and Its Improvement on Cardiac Dose

Objective:To analyze the application of deep inspiration breath hold technique in radiotherapy after breast-conserving surgery for left breast cancer and the improvement of cardiac dose.Methods:A total of 45 patients with left breast cancer treated in our hospital after breast-conserving surgery were selected,and the selection time was set from January 2020 to August 2022.All patients received radiotherapy.The right breast,heart,and lung volumes,and dose parameters of the heart,lungs,right breast,and left anterior descending coronary artery were compared under free breathing(FB)and deep inspiration breath hold(DIBH)technical modes.Results:The heart volume of the DIBH group was smaller than that of the FB group,and the left and right lung volumes were significantly larger than those of the FB group.In the DIBH group,the heart dose parameters V5,proper lung dose parameters,and left anterior descending coronary artery dose parameters were found lower than that of the FB group,and the differences were statistically significant(P<0.05).Conclusion:Compared with FB,the DIBH technique can reduce the heart’s size and increase the lung volume when used for radiotherapy after breast-conserving surgery for left breast cancer.It also reduces the dose to the heart,right lung,and left anterior descending coronary artery,thus protecting the heart and lungs.

Strengthening Exchange and Mutual Learning Between China and the Rest of the World

CPPCC member Du Zhanyuan gives an exclusive interview to China Today on how to enhance international communication and tell positive stories of Chinese modernization.AS an ancient Chinese philosopher said,“Amity between peoples holds the key to sound state-to-state relations.”This is often cited by President Xi Jinping to emphasize the importance of exchanges and mutual learning of civilizations in the development of international relations.

A Milestone on the Road to Chinese Modernizationn

Both the plenary session resolution and the statements made at the press conference are enormously significant.They are a benchmark for global confidence in China’s future path.THE Communist Party of China(CPC)holds its National Congress every five years.The CPC Central Committee,the highest body of the party convenes up to seven plenary sessions between congresses.The third plenum traditionally deals with economic issues.

Inter-Fraction Analysis of One Week Hypo-Fractionation of Deep Inspiration Breath Hold (DIBH) Technique for Left Sided Breast Cancer Radiation Treatment

The aim of this study was to investigate the inter-fraction variations, patient comfort and knowledge at Charlotte Maxeke Johannesburg Academic Hospital (CMJAH). The differences in set-up that occurred between treatment sessions for the left sided breast patients were observed and recorded. Measurements of routine set-up variation for 24 patients were performed by matching the cone beam computed tomography (CBCT) and the planning computed tomography (CT). Scans of all five fractions per patient were used to quantify the setup variations with standard deviation (SD) in all the three directions (anterior posterior, left right, and superior inferior). The patients DIBH comfort and knowledge was also evaluated. The average translational errors for the anterior posterior (AP, z), left-right (LR, x), and Superior-inferior (SI, y) directions were 0.40 cm, 0.40 cm, and 0.40 cm, respectively. The translation variation of the three directions showed statistical significance (P < 0.05). On comfort and knowledge investigation, among all participants, 80% moderately agreed that the therapist’s instructions for operating the deep inspiration breath hold (DIBH) technique were easy to understand, and 63.33% indicated that their comfort with the DIBH technique was neutral or average. The inter-fraction variations in patients with left-sided breast cancer were qualitatively analyzed. Significant shifts between CBCT and planning CT images were observed. The daily treatment verification could assist accurate dose delivery.

The Evolution of Mainling through a Journalist's Lens

What defines a book?It’s a vessel of knowledge and stories,with every person,event,object and place representing an ongoing narrative.The world holds vast,uncharted knowledge within countless volumes,and those who seek it with curiosity will always find books that call to them.Today,as a journalist,I am delighted to introduce the book of Mainling.

Application of a 2 Parameter Weibull Distribution in Modeling of State Holding Time in HIV/AIDS Transition Dynamics

This study investigates the application of the two-parameter Weibull distribution in modeling state holding times within HIV/AIDS progression dynamics. By comparing the performance of the Weibull-based Accelerated Failure Time (AFT) model, Cox Proportional Hazards model, and Survival model, we assess the effectiveness of these models in capturing survival rates across varying gender, age groups, and treatment categories. Simulated data was used to fit the models, with model identification criteria (AIC, BIC, and R2) applied for evaluation. Results indicate that the AFT model is particularly sensitive to interaction terms, showing significant effects for older age groups (50 - 60 years) and treatment interaction, while the Cox model provides a more stable fit across all age groups. The Survival model displayed variability, with its performance diminishing when interaction terms were introduced, particularly in older age groups. Overall, while the AFT model captures the complexities of interactions in the data, the Cox model’s stability suggests it may be better suited for general analyses without strong interaction effects. The findings highlight the importance of model selection in survival analysis, especially in complex disease progression scenarios like HIV/AIDS.

Microstructure evolution of isothermal holding treatment during melt solidification of Ti-6Al-4V alloy

Effect of isothermal holding treatment in the solidification process on the microstructure of Ti-6Al-4V alloy was studied by temperature controlled induced melting apparatus. The result shows that with isothermal holding treatment above the β transus temperature during solidification, the colony structure consisting of parallel lamellae was obtained. While the isothermal holding treatment was set at 960 °C, a unique bi-modal microstructure consisting of coarse primary α and fine secondary lamellar α was obtained. The primary lamellar α tended to break into several pieces, globularize and present equiaxed morphology. The formation mechanism of the equiaxed α can be explained with the atom immigration, high density dislocations, combined action with the interface tension of formed α phase during the isothermal holding treatment. After the isothermal holding, the retained β matrix transformed into fine lamellar α, thus, bi-modal microstructure was acquired. Compared with the lamellar structure, the grain boundary α presented discontinuously and cannot be distinguished from the primary α lamellae easily. The size of colonies α was greatly decreased. The microstructure tended to be much more homogeneous in the whole section of the samples.

Effect of pyrolysis temperature and hold time on the characteristic parameters of adsorbent derived from sewage sludge

According to the Doehlert's matrix method, the adsorbent derived from sewage sludge was prepared through chemical activation under controlling the pyrolysis temperature and hold time. The characteristic parameters including the total yield, adsorption of methylene blue, adsorption of iodine, BET surface area, micro-pore volume are 35%—49%, 16.5—38 mg/g, 285—362 mg/g, 185—359 m2/g, and 0.112—0.224 m3/g, respectively. According to the experimental data, the multi-linear regression method was adopted to fit the relations between the characteristic parameters and influential factors. At final, through optimization method, the optimal adsorbent is obtained when using 62 min as hold time and 1105K as pyrolysis temperature. Under the conditions, the adsorbent was produced and compared the characteristic parameters with model forecast value, the coherence is satisfied.

Effects of Calcining Temperature and Holding Time on the Synthesis of Aluminum Titanate

We aim in this research at synthesizing high-purity aluminium titanate with sludge from the aluminium profile factory by shock cooling method, and mainly discuss the effect of calcining reaction temperature and holding time on crystalline, microstructure and content of aluminum titanate materials to determine the preferred calcining temperature and holding time. XRD and SEM methods were utilized to characterize the crystalline and microstructure of each specimen, Rietveld Quantification software was used for the determination of different crystalline contents of specimens, and Philips plus software was applied to determine the cell parameters of aluminium titanate in different specimens. According to the experimental results, preferred calcining temperature is determined as 1400℃ and preferred holding time is 2 h, at which the grains of aluminum titanate grow completely and the purity of aluminum titanate is 97.2wt%.

Grain refinement of AZ91D alloy by intensive melt shearing and its persistence after remelting and isothermal holding

Intensive melt shearing has a significant grain refining effect on some light alloys.However,the persistence of the grain refining effect during isothermal holding and remelting is still unclear,although it is very important for the practical application.In this study,intensive melt shearing was achieved in a twin-screw mechanism to investigate its grain refining effect on AZ91D magnesium alloy.The refinement mechanism was discussed and the persistence of grain refinement after remelting and isothermal holding was also studied.A Zeiss imaging system with polarized light was used for quantitative measurement of grain size.The results show that the intensive melt shearing has a significant grain refining effect on AZ91D magnesium alloy.With the application of intensive melt shearing,the grain size of AZ91D magnesium alloy can be reduced from 530 μm(for a typical as-cast microstructure) to 170 μm,which is about 70% size reduction.The grain refinement achieved by the intensive melt shearing can be partially kept after isothermal holding and remelting.It is believed that the refinement effect was mainly due to the finer and well dispersed oxide particles formed by high intensive shearing.The smaller size of oxide particles and their slow motion velocity in the sheared melt could make important contributions to the remained grain refinement.

Effect of Holding Time on the Microstructure and Mechanical Properties of Dual-Phase Steel during Intercritical Annealing

Continuous annealing simulation tests were conducted by using a continuous annealing thermomechanical simulator. Holding times of 5, 60, 180, and 480 seconds for an intercritical annealing temperature of 820℃ were adopted to investigate the evolution of the mierostructure and mechanical properties of ferrite-bainite dual-phase steel. The ferrite-bainite dual-phase steel was characterized by high strength and low yield ratio due to the presence of the constituents （polygonal ferrite, bainite, martensite and retained austenite） of the steel microstructure. Specimen 3 exhibits the highest value of A50 （7.67%） and a product of Rm × A50 （10453MPa%） after a 180s holding. This is likely attributed to the presence of a C-enriched retained anstenite in the microstructure. And the effect of martensite islands and carbide precipitate is thought to be able to contribute in strengthening the present steel. It is expected that equilibrium of anstenite fraction would be reached for reasonable intercritical holding period, regardless of the heating temperature. The results suggest that long increasing holding times may not be needed because the major phase of the microstructure does not change very significantly. It is favorable for industrial production of DP steels to shorten holding times. Key words： ferrite-bainite dual-phase steel; holding time; martensite islands; mechanical properties

Water Holding Characteristics of Coarse Woody Debris of Abies fabri Forest on the East Slope of Tibet Sygera Mountain

Coarse woody debris( CWD) has an important role in hydrological function and water and soil conservation function of forest ecosystem especially mountain forest ecosystem. To understand water holding capacity of CWD in subalpine forest of southeast Tibet,CWD reserve of primitive A. fabri forest in Sygera Mountain was investigated by sample plot method,and water absorption and storage capacity of CWD was studied by using soaking method. The results showed that decay grade was positively related to water storage potential,that is to say,the higher the decay grade,the larger the water storage potential. Saturated water holding capacity,saturated water holding rate,effective water holding capacity and effective water holding rate of A. fabri CWD all rose with decay grade increased,and the order was Ⅴ>Ⅳ>Ⅲ>Ⅱ>Ⅰ. CWD reserve was 51.555 t/hm^2,and the maximum water storage capacity was 71.601 t/hm^2,while effective water storage capacity was 60.861 t/hm2,which was equivalent to 6.086 mm of rainfall.