Effect of sintering temperature and holding time on structure and properties of Li_(1.5)Ga_(0.5)Ti_(1.5)(PO_4)_(3)electrolyte with fast ionic conductivity

Li1.5Ga0.5Ti1.5(PO4)3(LGTP)is recognized as a promising solid electrolyte material for lithium ions.In this work,LGTP solid electrolyte materials were prepared under different process conditions to explore the effects of sintering temperature and holding time on relative density,phase composition,microstructure,bulk conductivity,and total conductivity.In the impedance test under frequency of 1-10~6 Hz,the bulk conductivity of the samples increased with increasing sintering temperature,and the total conductivity first increased and then decreased.SEM results showed that the average grain size in the ceramics was controlled by the sintering temperature,which increased from(0.54±0.01)μm to(1.21±0.01)μm when the temperature changed from 750 to 950°C.The relative density of the ceramics increased and then decreased with increasing temperature as the porosity increased.The holding time had little effect on the grain size growth or sample density,but an extended holding time resulted in crack generation that served to reduce the conductivity of the solid electrolyte.

Characterization of Hydroxyapatite Extracted from Crab Shell Using the Hydrothermal Method with Varying Holding Times

Hydroxyapatite(HA)is a bio ceramic commonly utilized in bone tissue engineering due to its bioactive and osteoconductive properties.Crab shells are usually disregarded as waste material despite their significant CaCO_(3) content,and have not been widely utilized in the synthesis of HA.This study aims to synthesize and analyze HA derived from crab shells using the hydrothermal method with different durations of holding time.This study utilized precipitated calcium carbonate(PCC)derived from crab shells.With a hydrothermal reactor set at 160℃ and varying holding times of 14(HA_14),16(HA_16),and 18(HA_18)h,a PCC and(NH4)2HPO4 mixture was used to synthesize HA.The synthesis results were analyzed using scanning electron microscopy(SEM),fourier transform infrared spectroscopy(FTIR),and X-ray diffraction(XRD)tests.This study has accomplished the synthesis of HA from crab shells.Nonetheless,the final product of synthesis still contained CaCO_(3) as an impurity.The prolonged hydrothermal holding time of 14 to 18 h resulted in a reduction of impurities while increasing the percentage of crystal weight and crystallite size of HA.Specimen CH_18 is the best-quality product generated in this study.This specimen produced HA with the highest percentage of crystal weight and crystallite size compared to the other specimens.Furthermore,specimen CH_18 exhibited the lowest concentration of impurities.The Ca/P ratio in this specimen was also the closest to 1.67.The Ca/P ratio,crystallite size,and crystal weight percentage of this specimen are 1.54,19.06 nm,and 99.1%,respectively.

Application of a 2 Parameter Weibull Distribution in Modeling of State Holding Time in HIV/AIDS Transition Dynamics

This study investigates the application of the two-parameter Weibull distribution in modeling state holding times within HIV/AIDS progression dynamics. By comparing the performance of the Weibull-based Accelerated Failure Time (AFT) model, Cox Proportional Hazards model, and Survival model, we assess the effectiveness of these models in capturing survival rates across varying gender, age groups, and treatment categories. Simulated data was used to fit the models, with model identification criteria (AIC, BIC, and R2) applied for evaluation. Results indicate that the AFT model is particularly sensitive to interaction terms, showing significant effects for older age groups (50 - 60 years) and treatment interaction, while the Cox model provides a more stable fit across all age groups. The Survival model displayed variability, with its performance diminishing when interaction terms were introduced, particularly in older age groups. Overall, while the AFT model captures the complexities of interactions in the data, the Cox model’s stability suggests it may be better suited for general analyses without strong interaction effects. The findings highlight the importance of model selection in survival analysis, especially in complex disease progression scenarios like HIV/AIDS.

Dust-Holding Capacity and Bio-Chemical Changes of Plant Species Growing in an Around Opencast Mining Area of Bundelkhand Region of Uttar Pradesh, India

The present study has been carried out on a total of 50 available plant species to assess their dust-capturing capacity and biochemical performances in and around open cast granite mine areas of Jhansi district and Bundelkhand University campus treated as control site. Plant species existing under a polluted environment for a long time may be considered as potentially resistant species and recommended for green belt design in mining areas, especially to cope with dust pollution. Results showed the pollution level, especially of mining-originated dust particles holding capacity of leaves and effects of different biochemical parameters (Total Chlorophyll, Protein and Carotenoid) of existing plant species both from mining areas as well as from Bundelkhand University campus. Based on their performances, Tectona grandis L., Ficus hispida L., Calotropis procera Aiton., Butea monosperma Lam. and Ficus benghalensis L., etc. are highly tolerant species while Ficus infectoria L., Artocarpus heterophyllus Lam., Ipomoea purpurea L., Allianthus excelsa Roxb. and Bauhinia variegata L. are intermediate tolerant species. T. grandis had shown the highest dust-holding capacity (2.566 ± 0.0004 mg/cm2) whereas Albizia procera (0.018 ± 0.0002 mg/cm2) was found to be the lowest dust-holding capacity. Our findings also showed that the T. grandis and F. hispida have significant dust deposition with minimal effect of dust on their leaf chlorophyll (17.447 ± 0.019 mg/g and 14.703 ± 0.201 mg/g), protein (0.699 ± 0.001 mg/g and 0.604 ± 0.002 mg/g) and carotenoid (0.372 ± 0.003 mg/g and 0.354 ± 0.003 mg/g) content respectively among all selected plant species. Therefore, in the present investigation, plant species with high tolerance to high dust-holding capacity on their leaf surfaces are preferable for green corridors as open cast granite mines and their adjacent areas.

Nail Holding Performance of Self-Tapping Screws on Masson Pine and Chinese Fir Dimension Lumbers

Screw connection is a type most commonly applied to timber structures.As important commercial tree species in China,Masson pine and Chinese fir have the potential to prepare wood structures.In this study,the effects of the diameter of the self-tapping screw and the guiding bores on the nail holding performance on different sections of Masson pine and Chinese fir dimension lumbers were mainly explored.The results showed that:(1)The nail holding strength of the tangential section was the maximum,followed by that of the radial section,and that of the cross section was the minimum.(2)The nail holding strength of Masson pine was higher than that of Chinese fir.(3)The nail holding strength grew with the increase in the diameter of self-tapping screws,but a large diameter would lead to plastic cracking of the timber,thus further affecting the nail holding strength.Masson pine and Chinese fir reached the maximum nail holding strength when the diameter of self-tapping screws was 3.5 mm.(4)Under a large diameter of screws,prefabricated guiding bores could mitigate timber cracking and improve its nail holding strength.(5)Prefabricated guiding bores were more necessary for the screw connection of Masson pine.The results obtained could provide a scientific basis for the screw connection design of Masson pine and Chinese fir timber structures.

Mott Gap Filling by Doping Electrons through Depositing One Sub-Monolayer Thin Film of Rb on Ca_(2)CuO_(2)Cl_(2)

Understanding the doping evolution from a Mott insulator to a superconductor probably holds the key to resolve the mystery of unconventional superconductivity in copper oxides. To elucidate the evolution of the electronic state starting from the Mott insulator, we dose the surface of the parent phase Ca_(2)CuO_(2)Cl_(2) by depositing Rb atoms, which are supposed to donate electrons to the CuO_(2) planes underneath. We successfully achieved the Rb sub-monolayer thin films in forming the square lattice. The scanning tunneling microscopy or spectroscopy measurements on the surface show that the Fermi energy is pinned within the Mott gap but close to the edge of the charge transfer band. In addition, an in-gap state appears at the bottom of the upper Hubbard band(UHB), and the Mott gap will be significantly diminished. Combined with the Cl defect and the Rb adatom/cluster results, the electron doping is likely to increase the spectra weight of the UHB for the double occupancy. Our results provide information to understand the electron doping to the parent compound of cuprates.

Perspectives for delivery of therapeutics by extravasation of biodegradable microspheres in the brain

Development of therapeutics for brain diseases has remained challenging,in particular due to the difficulty of passing the blood-brain barrier.As a result,the current arsenal of therapeutics targeting the brain is limited to small,lipid-soluble drugs and there is a lack of options for treating neuroblastomas,Alzheimer’s disease,and many other devastating pathologies.Despite the advances in strategies for crossing the blood-brain barrier such as the use of nanoparticles(Hersh et al.,2022;Duan et al.,2023),such delivery systems have not yet reached clinical practice.Therefore,novel platforms for the transport of therapeutics across the blood-brain barrier remain highly desired.This specifically holds for large molecules such as monoclonal antibodies and recombinant proteins,as well as nucleotide-based therapeutics and cell therapies.Research efforts in this field are increasing exponentially,with thousands of publications in the last few years.

Adeno-associated virus-mediated intraprostatic suppression of MIR375 inhibits tumor progression in the TRAMP mouse nmodel of prostate cancer

The treatment of prostate cancer(PCa)needs to be improved.1 Micro-RNAs(miRNAs)are a subtype of non-coding,single-stranded RNAs that influence cellular survival and death by modulating mRNAs.Among these miRNAs,MIR375 has a critical role in the regulation of tumorigenesis?and holds promise as a novel therapeutic target for future PCa treatment.Recombinant adeno-associated virus(rAAV)exhibits non-pathogenicity,low-grade inflammation,and robust and long-lasting expressions of target genes.We have previously described the rAAv9 as a valid vector to transfer target miRNAs and genes,3 so rAAv9 could be used as a vector to deliver MIR375 into the mouse prostate and PCa cells.

Introducing Traditional Chinese Medicine New Medicine Creation Team led by Professor Zhang Tong

The Traditional Chinese Medicine(TCM)New Medicine Creation Team is led by Professor Zhang Tong(张彤),who has dedicated his career to pioneering advancements and modernizations in TCM pharmaceuticals.The team currently comprises over 10 faculty members,including 2 professors,2 researchers,3 associate professors,and 6 senior laboratory technicians.Notably,Professor Zhang Tong,the team leader,holds the esteemed position of the Dean at the School of Pharmacy,Shanghai University of TCM.He also serves as a visiting professor,doctoral supervisor,recipient of special government allowances from the State Council,and a distinguished member of the National Pharmacopoeia Committee.Recognized as an outstanding talent of the new century by the Ministry of Education,Professor Zhang Tong is also lauded as a leading figure in Shanghai and an exemplary academic leader with multiple important positions.

A Brief Introduction to Sichuan Academy of Social Sciences

Established in 1958,Sichuan Academy of Social Sciences(SASS)is a public institutionguided by the People’s Government of Sichuan Province.It is a comprehensive and specializedresearch institution in social sciences that integrates research,education,editing,andconsulting services.It holds the registered trademark of“Tianfu Think Tank”and owns twocampuses:Baihuatan and Banzhuyuan.

Toxicity Evaluation of Different Exposure Scenarios of Road Dust Using Daphnia magna and Artemia salina as Aquatic Organisms, and Prosopis cineraria and Vachellia tortilis as Native Plant Species

Particulate matter (PM10) deposited as road dust is considered an important source of contamination from atmosphere. However, there are limited studies on the toxicity of road dust as such on different organisms. This study evaluates the toxicity of road dust using different extraction scenarios on Daphnia magna and Artemia salina as aquatic organisms and also on Prosopis cineraria and Vachellia tortilis as local plant species. Chemical analysis of different extracts shows considerable amount of trace metals, however the trace metals in the dust extract associated with suspended sediment were not absorbed by the receptors. On the other hand, the concentration of trace metals in the artificial mixture was found bioavailable and absorbed causing a high percentage of mortality. In the plant assay, significant difference was obtained in the germination percentage between the control and three different extraction exposures in both plant species. The mean root length of P. cineraria and V. tortilis were higher in 20% and 50% extracts than the control probably due to the availability of nutrients from the dust extract. Interestingly however, the seedling vigor index was the opposite with higher index in the control and lower in dust extracts that contain heavy metals.

A Brief Introduction to Sichuan Academy of Social Sciences

Established in 1958,Sichuan Academy of Social Sciences(SASS)is a public institution guided by the People’s Government of Sichuan Province.It is a comprehensive and specialized research institution in social sciences that integrates research,education,editing,and consulting services.It holds the registered trademark of“Tianfu Think Tank”and owns two campuses:Baihuatan and Banzhuyuan.

A Brief Introduction to Sichuan Academy of Social Sciences

Established in 1958, Sichuan Academy of Social Sciences (SASS) is a public institution guided by the People’s Government of Sichuan Province. It is a comprehensive and specialized research institution in social sciences that integrates research, education, editing, and consulting services. It holds the registered trademark of “Tianfu Think Tank” and owns two campuses:Baihuatan and Banzhuyuan.

Inter-Fraction Analysis of One Week Hypo-Fractionation of Deep Inspiration Breath Hold (DIBH) Technique for Left Sided Breast Cancer Radiation Treatment

The aim of this study was to investigate the inter-fraction variations, patient comfort and knowledge at Charlotte Maxeke Johannesburg Academic Hospital (CMJAH). The differences in set-up that occurred between treatment sessions for the left sided breast patients were observed and recorded. Measurements of routine set-up variation for 24 patients were performed by matching the cone beam computed tomography (CBCT) and the planning computed tomography (CT). Scans of all five fractions per patient were used to quantify the setup variations with standard deviation (SD) in all the three directions (anterior posterior, left right, and superior inferior). The patients DIBH comfort and knowledge was also evaluated. The average translational errors for the anterior posterior (AP, z), left-right (LR, x), and Superior-inferior (SI, y) directions were 0.40 cm, 0.40 cm, and 0.40 cm, respectively. The translation variation of the three directions showed statistical significance (P < 0.05). On comfort and knowledge investigation, among all participants, 80% moderately agreed that the therapist’s instructions for operating the deep inspiration breath hold (DIBH) technique were easy to understand, and 63.33% indicated that their comfort with the DIBH technique was neutral or average. The inter-fraction variations in patients with left-sided breast cancer were qualitatively analyzed. Significant shifts between CBCT and planning CT images were observed. The daily treatment verification could assist accurate dose delivery.

Strengthening Exchange and Mutual Learning Between China and the Rest of the World

CPPCC member Du Zhanyuan gives an exclusive interview to China Today on how to enhance international communication and tell positive stories of Chinese modernization.AS an ancient Chinese philosopher said,“Amity between peoples holds the key to sound state-to-state relations.”This is often cited by President Xi Jinping to emphasize the importance of exchanges and mutual learning of civilizations in the development of international relations.

The Importance of Our Dialogue

China-Europe dialogue is not only beneficial to the two sides but also holds global significance.HISTORICALLY,learning from the East spread to the West and Western learning spread to the East,creating a story of exchanges and mutual learning among human civilizations.These exchanges are primarily characterized by complementarity,non-equivalence and practicality.

The Evolution of Mainling through a Journalist's Lens

What defines a book?It’s a vessel of knowledge and stories,with every person,event,object and place representing an ongoing narrative.The world holds vast,uncharted knowledge within countless volumes,and those who seek it with curiosity will always find books that call to them.Today,as a journalist,I am delighted to introduce the book of Mainling.

A Land of Vitality

People-centred development is the core concept underlining China’s endeavours to improve human rights in China.“People’s happiness is the ultimate human right,while development holds the key to delivering better lives to the people,”Chinese President Xi Jinping reiterated in a letter to the 2023 Forum on the Development of Xizang,China.

Effects of Addition of Bee Pollen on Water Holding Capacity of Pork

[ Objective] To explore the effects of different proportion of bee pollen on the water holding capacity of pork in Duroc Landrace x Yorkshire growing-finishing pigs in order to determine the optimal proportion. [ Method] A total of 80 Duroc x Landrace x Yorkshire growing-finishing pigs, weighing （10.0 ± 1.0） kg, were randomly divided into five groups. The experimental period was 120 d including the 5-day pre-feecling period. The corn-soybean meal was not replaced during the whole period. All pigs had free access to feed and water. The pigs were fasting for 24 h but not prohibited from feed before the beginning. Group I was the control group reared with the diet not supplemented bee pollen. The pigs in group II, III ,IV and V were reared with the diet supplemented bee pollen at the concentration of 1%, 3%, 5% and 7%, respectively. After slaughtering, eye muscle was used for determination of water holding capacity through fast filter paper method, drip loss method, cooking loss method and Na- pole yield determination method. [ Resultl With the increase of the proportion of bee pollen, the water holding capacity of pork was first good and then poor. The addition of bee pollen at the concentration of 5% significantly reduced the drip loss of pork and the water holding capacity which was detected by fast filter paper method, but the cooking loss and Napole yield were not significantly influenced. [ Condmion] The bee pollen can effectively improve the water holding capacity of pork in Duroc x Landrace x Yorkshire growing-finishing pigs, and the optimal proportion is 5%.

Optimization of Holding Temperature and Holding Thickness for Controlled Rolling on Plate Mill

Holding temperature and holding thickness are main parameters for two-phase controlled rolling on plate mill. The optimization of holding temperature and holding thickness for pass schedule calculation of two-phase controlled rolling on plate mill was presented and its feature is as follows： （1） Determination of holding thickness can be automatically obtained based on the influence of mill safety limits, tracking zone length and holding time on holding thickness; （2） Determination of holding temperature can be automatically obtained and the holding time can be reduced as much as possible; （3） Algorithm can modify the holding temperature and thickness depending on slab size and product size.