Both experimental and numerical approaches were used to study dynamic failure properties and patterns of flattened Brazilian discs,containing two prefabricated cracks intersected at a varying angle.Mechanism of crack ...Both experimental and numerical approaches were used to study dynamic failure properties and patterns of flattened Brazilian discs,containing two prefabricated cracks intersected at a varying angle.Mechanism of crack initiation,propagation,and cut-through were scrutinized and influences of the intersection angle on specimen strength and acoustic emission performance were also studied.All primary cracks initialize near the middle or the tip points of the upper prefabricated crack,and they continue to develop along the load direction and finally cut through the specimen.The secondary cracks could be observed in directions almost horizontal or parallel to the directions of prefabricated cracks.Furthermore,it is found that stress intensity factor reaches its maximum for specimen with intersection angle of 0 degree.展开更多
Split Hopkinson pressure bar(SHPB)has been used to study the dynamic failure pattern of flattened mortar Brazilian disc under impact load.Each disc contains several prefabricated cracks paralleled to each other.Dynami...Split Hopkinson pressure bar(SHPB)has been used to study the dynamic failure pattern of flattened mortar Brazilian disc under impact load.Each disc contains several prefabricated cracks paralleled to each other.Dynamic FEM has also been adopted to simulate such failure behavior.The mechanism of crack initiation,propagation and cut-through have been scrutinized with both experimental and numerical approaches.Influence of the number of the prefabricated cracks on the specimen strength and acoustic emission(AE)performance can be observed and studied.The results show that the strength decreases and AE counts increases,when the number of the prefabricated cracks increases.展开更多
Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerica...Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement （PPC）, fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.展开更多
制作了中心直裂纹平台巴西圆盘(cracked straight through flattened Brazilian disc-CSTFBD)试样,利用分离式霍普金森压杆(split Hopkinson pressure bar SHPB)加载,进行了岩石纯Ⅰ型和复合型(Ⅰ+Ⅱ型)动态断裂实验。由于加载角(载荷...制作了中心直裂纹平台巴西圆盘(cracked straight through flattened Brazilian disc-CSTFBD)试样,利用分离式霍普金森压杆(split Hopkinson pressure bar SHPB)加载,进行了岩石纯Ⅰ型和复合型(Ⅰ+Ⅱ型)动态断裂实验。由于加载角(载荷方向与裂纹线的夹角)在制作试样时已经通过裂纹线与试样平台的位置关系确定,因此在实验中可以方便而准确地实施加载。比较了纯Ⅰ型加载和复合型加载下压杆上记录的入射波、反射波和透射波的波形。采用实验与数值相结合的方法,将实验得到的动态载荷输入有限元程序,得到了纯Ⅰ型试样的动态断裂韧度和复合型试样的两种动态应力强度因子的时间历程。计算了加载角为15°的试样应力强度因子的复合比(KⅠ(t)/KⅡ(t)),此计算值与文献结果吻合较好,验证了实验方法的有效性。展开更多
基金Funded by the National Natural Science Foundation of China(Nos.51878190 and 51678170)。
文摘Both experimental and numerical approaches were used to study dynamic failure properties and patterns of flattened Brazilian discs,containing two prefabricated cracks intersected at a varying angle.Mechanism of crack initiation,propagation,and cut-through were scrutinized and influences of the intersection angle on specimen strength and acoustic emission performance were also studied.All primary cracks initialize near the middle or the tip points of the upper prefabricated crack,and they continue to develop along the load direction and finally cut through the specimen.The secondary cracks could be observed in directions almost horizontal or parallel to the directions of prefabricated cracks.Furthermore,it is found that stress intensity factor reaches its maximum for specimen with intersection angle of 0 degree.
基金Funded by the National Natural Science Foundation of China(Nos.51678170,51878190)。
文摘Split Hopkinson pressure bar(SHPB)has been used to study the dynamic failure pattern of flattened mortar Brazilian disc under impact load.Each disc contains several prefabricated cracks paralleled to each other.Dynamic FEM has also been adopted to simulate such failure behavior.The mechanism of crack initiation,propagation and cut-through have been scrutinized with both experimental and numerical approaches.Influence of the number of the prefabricated cracks on the specimen strength and acoustic emission(AE)performance can be observed and studied.The results show that the strength decreases and AE counts increases,when the number of the prefabricated cracks increases.
基金sponsored by Iran’s National Elites Foundation (INEF)
文摘Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement （PPC）, fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.
文摘制作了中心直裂纹平台巴西圆盘(cracked straight through flattened Brazilian disc-CSTFBD)试样,利用分离式霍普金森压杆(split Hopkinson pressure bar SHPB)加载,进行了岩石纯Ⅰ型和复合型(Ⅰ+Ⅱ型)动态断裂实验。由于加载角(载荷方向与裂纹线的夹角)在制作试样时已经通过裂纹线与试样平台的位置关系确定,因此在实验中可以方便而准确地实施加载。比较了纯Ⅰ型加载和复合型加载下压杆上记录的入射波、反射波和透射波的波形。采用实验与数值相结合的方法,将实验得到的动态载荷输入有限元程序,得到了纯Ⅰ型试样的动态断裂韧度和复合型试样的两种动态应力强度因子的时间历程。计算了加载角为15°的试样应力强度因子的复合比(KⅠ(t)/KⅡ(t)),此计算值与文献结果吻合较好,验证了实验方法的有效性。
