Homogenate extraction technology of camptothecine and hydroxycamptothecin from Camptotheca acuminata leaves

Camptothecine （CPT） and hydroxycamptothecin （HCPT）, two kinds of anti-cancer alkaloids, were extracted from Camptotheca acuminata leaves using homogenate extraction technology under different conditions such as the ratio of material to liquid, ethanol concentration, and homogenate time. The optimum technology parameters for homogenate extraction of CPT and HCPT from C acuminata leaves were determined as homogenate time at 8 rain, ethanol concentration at 55% and the ratio of material to liquid at 1：15 （g：mL）. By using the optimized parameters, we obtained 0.639‰ extraction rate for CPT and 0.437‰ for HCPT. The extraction yields of CPT and HCPT extracted by homogenating technology were higher than those by other extractive methods, such as ultrasonic, reflux, shaking in water bath. It is concluded that the homogenate extraction technology was an efficient method for extracting CPT and HCPT from C acuminata leaves, with characteristics of less extraction time and high yield.

Epigallocatechin gallate content change of the fresh tea leaf homogenates extracted by different methods in extraction and preservation

The fresh leaves of China green tea, Camellia sinensis, were collected from Fuyang, Zhejiang Province, China, in April. The tea polyphenols was extracted by four different methods （homogenized with distilled water at room temperature, homogenized with 0.3% citric acid （w/v） at room temperature, 5- min boiling and homogenized with distilled water at room temperature, homogenized with 85℃ distilled water）, and after preserving at room temperature, the change of the Epigallocatechin gallate （EGCG） contents of the extracts was investigated. Results indicated that the EGCG content of homogenate extracted with 85℃ distilled water was the highest before the extract was preserved, followed by that of the extract homogenized with 0.3% citric acid at room temperature. During preservation, EGCG content changed obviously. The EGCG contents of homogenates extracted with distilled water at room temperature and 85℃ distilled water declined quickly and separately reduced to 21.52% and 54.6% of their initial contents after preservation for 12 h. The EGCG contents extracted by 0.3% citric acid （w/v） solvent at room temperature and 5- min boiling/homogenized with distilled water at room temperature declined relatively slowly ,and separately reduced to 76.9% and 85.16% of their initial contents after preservation for 12 h. It was also found that the citric acid can prevent the degradation of EGCG and the extract solution color is light green

Maggot homogenate is associated with neural regeneration and wound healing in the rat

BACKGROUND：Live delivery limits the clinical application of maggot therapy. To date in China, there are no in vivo reports regarding wound healing mechanisms of maggot therapy or the effects of maggot homogenate on wound nerve regeneration.OBJECTIVE：To avoid complications due to the use of live maggots, an aseptic maggot homogenate was applied. Substance P （SP） and gene protein product 9.5 expression in a cutaneous wound was analyzed to explore possible mechanisms of neural regeneration and wound healing in the rat.DESIGN, TIME AND SETTING：A random grouping and controlled animal study was performed at the laboratory of the Department of Orthopedic Surgery, First Affiliated Hospital, Dalian Medical University from August 2008 to April 2009.MATERIALS：Live maggots were cultured and provided by the laboratory of the Department of Orthopedic Surgery of the First Affiliated Hospital, Dalian Medical University, China.METHODS：A total of 48 adult rats were selected and two acute, full-thickness wounds （round, 1.5 cm diameter） were created on the back of each rat. The two wounds were randomly assigned to homogenate product and control groups. Following two-step disinfection of maggots, a homogenate was produced from 10 maggots and applied to the wound area in the homogenate product group, while the wounds in the control group were treated with normal saline alone.MAIN OUTCOME MEASURES：On days 1,3, 7, 10, 14, and 21 following injury, the wound tissue was excised. Histological examination of the wound was observed by hematoxylin and eosin staining or Masson＇s Trichrome staining. SP and protein gene product 9.5 expressions were examined by immunohistochemistry to evaluate wound neural regeneration.RESULTS：On days 7, 10, and 14, the rate of wound healing was significantly greater in the homogenate product group compared with the control group （P 〈 0.05）, and homogenate healing was better than that seen in the control group. On days 3, 7, and 10, SP expression in cells and regenerative nerves was significantly greater in the homogenate product group compared with the control group （P 〈 0.05）. On days 7 and 10, protein gene product 9.5 expression was detected in the regenerative nerve, and expression level was significantly greater in the homogenate product group compared with the control group （P 〈 0.05）.CONCLUSION：Maggot homogenate resulted in upregulated SP and protein gene product 9.5 expressions, thereby promoting neural regeneration and wound healing.

Homogenate extraction technology of camptothecine and hydroxycamptothecin from Camptotheca acuminata leaves

Camptothecine(CPT) and hydroxycamptothecin(HCPT), two kinds of anti-cancer alkaloids, were extracted from Camptotheca acuminata leaves using homogenate extraction technology under different conditions such as the ratio of material to liquid, ethanol concentration, and homogenate time.The optimum technology parameters for homogenate extraction of CPT and HCPT from C.acuminata leaves were determined as homogenate time at 8 min, ethanol concentration at 55% and the ratio of material to liquid at 1:15(g:mL).By using the optimized parameters, we obtained 0.639‰ extraction rate for CPT and 0.437‰ for HCPT.The extraction yields of CPT and HCPT extracted by homogenating technology were higher than those by other extractive methods, such as ultrasonic, reflux, shaking in water bath.It is concluded that the homogenate extraction technology was an efficient method for extracting CPT and HCPT from C.acuminata leaves, with characteristics of less extraction time and high yield.

Directional induction of dopaminergic neurons from neural stem cells using substantia nigra homogenates and basic fibroblast growth factor

To date, complex components of available reagents have been used for directional induction of neural stem cells into dopaminergic neurons, resulting in a poor ability to repeat experiments. This study sought to investigate whether a homogenate of the substantia nigra of adult rats and/or basic fibroblast growth factor could directionally induce neural stem cells derived from the subventricular zone of embryonic rats to differentiate into dopaminergic neurons. Tyrosine hydroxylase-positive cells were observed exclusively after induction with the homogenate supernatant of the substantia nigra from adult rats and basic fibroblast growth factor for 48 hours in vitro. However, in the groups treated with homogenate supernatant or basic fibroblast growth factor alone, tyrosine hydroxylase expression was not observed. Moreover, the content of dopamine in the culture medium of subventricular zone neurons was significantly increased at 48 hours after induction with the homogenate supernatant of the substantia nigra from adult rats and basic fibroblast growth factor. Experimental findings indicate that the homogenate supernatant of the substantia nigra from adult rats and basic fibroblast growth factor could directionally induce neural stem cells derived from the subventricular zone of embryonic rats to differentiate into dopaminergic neurons in the substantia nigra with the ability to secrete dopamine.

Cryptococcal antigen testing of lung tissue homogenate improves pulmonary cryptococcosis diagnosis:Two case reports

BACKGROUND Pulmonary cryptococcosis(PC)is an opportunistic infectious disease of the respiratory system.Lung tissue biopsies,culture of respiratory samples(e.g.,sputum,lung tissue,pleural fluid,and bronchoalveolar lavage fluid),and cryptococcal antigen(CrAg)testing are helpful for a definitive diagnosis.However,these tests are sometimes falsely negative.PC is often misdiagnosed or underdiagnosed owing to the absence of obvert symptoms,poor imaging specificity,and false-negative laboratory tests.CASE SUMMARY We report two female patients who underwent computed tomography-guided percutaneous needle pulmonary biopsy of a lung nodule for a confirmed diagnosis.In both patients,the CrAg test on the lung biopsy tissue homogenate was positive,while the serum CrAg test was negative.Combined with the lung tissue pathology,we made the diagnosis of PC.Antifungal therapy was effective in both patients.CONCLUSION Given the findings of our cases and the literature review,lung tissue homogenate CrAg testing can be helpful in improving the diagnosis of PC.

The effect of natural plant-based homogenates as additives on the quality of yogurt:A review

Significant research has been conducted on using natural plant-based homogenates(NPBH)as additives to improve the quality of yogurt.This paper reviews the effects,mechanisms,and research methods of NPBH as additives to the probiotic content,texture,flavor,and nutritional value of yogurt.The mechanisms by which NPBH promotes the growth of lactic acid bacteria are reviewed,including nutrients in the homogenates,a suitable buffering environment,and the metabolic production of probiotics.Fructose,pectin,dietary fiber,protein,and polysaccharides are the primary influences on the yogurt texture.The aromatic precursors contained in NPBH,their contribution to yogurt flavor,and the health benefits of yogurt nutritional fortification are detailed.In the future,priority could be given to adding Chinese herbs(like wolfberry,saffron,and Rhodiola)with preventing alcoholic liver,anti-aging,blood pressure reduction,and other disease treatment or prevention functions to the yogurt to achieve a win-win situation.In addition,research on the function of NPBH yogurt should focus on the clinical implications.

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

Studies on the biosynthesis of arteannuin——Ⅳ.The biosynthesis of arteanniuin and arteannuin B by the leaf homogenate of Artemisia annua L.

Arteannuic acid and(-)11R,13-d(?)ydroarteannuic acid are the key intermediates in the biosynthesis of arteannuin by the leaf homogenate of Artemisia annua L.,and arteannuic acid and epoxyarteannuic acid are the intermediates of arteannuin B.and epoxyarteannuic acid can not be transformed into arteannuin by the homogenate.

Formation and transformation of metastable LPSO building blocks clusters in Mg-Gd-Y-Zn-Zr alloys by spinodal decomposition and heterogeneous nucleation

To study the formation and transformation mechanism of long-period stacked ordered(LPSO)structures,a systematic atomic scale analysis was conducted for the structural evolution of long-period stacked ordered(LPSO)structures in the Mg-Gd-Y-Zn-Zr alloy annealed at 300℃~500℃.Various types of metastable LPSO building block clusters were found to exist in alloy structures at different temperatures,which precipitate during the solidification and homogenization process.The stability of Zn/Y clusters is explained by the first principles of density functional theory.The LPSO structure is distinguished by the arrangement of its different Zn/Y enriched LPSO structural units,which comprises local fcc stacking sequences upon a tightly packed plane.The presence of solute atoms causes local lattice distortion,thereby enabling the rearrangement of Mg atoms in the different configurations in the local lattice,and local HCP-FCC transitions occur between Mg and Zn atoms occupying the nearest neighbor positions.This finding indicates that LPSO structures can generate necessary Schockley partial dislocations on specific slip surfaces,providing direct evidence of the transition from 18R to 14H.Growth of the LPSO,devoid of any defects and non-coherent interfaces,was observed separately from other precipitated phases.As a result,the precipitation sequence of LPSO in the solidification stage was as follows:Zn/Ycluster+Mg layers→various metastable LPSO building block clusters→18R/24R LPSO;whereas the precipitation sequence of LPSO during homogenization treatment was observed to be as follows:18R LPSO→various metastable LPSO building block clusters→14H LPSO.Of these,14H LPSO was found to be the most thermodynamically stable structure.

Catalytic effect in lithium metal batteries: From heterogeneous catalyst to homogenous catalyst

Lithium metal batteries are regarded as prominent contenders to address the pressing needs owing to the high theoretical capacity.Toward the broader implementation,the primary obstacle lies in the intricate multi-electron,multi-step redox reaction associated with sluggish conversion kinetics,subsequently giving rise to a cascade of parasitic issues.In order to smooth reaction kinetics,catalysts are widely introduced to accelerate reaction rate via modulating the energy barrier.Over past decades,a large amount of research has been devoted to the catalyst design and catalytic mechanism exploration,and thus the great progress in electrochemical performance has been realized.Therefore,it is necessary to make a comprehensive review toward key progress in catalyst design and future development pathway.In this review,the basic mechanism of lithium metal batteries is provided along with corresponding advantages and existing challenges detailly described.The main catalysts employed to accelerate cathode reaction with emphasis on their catalytic mechanism are summarized as well.Finally,the rational design and innovative direction toward efficient catalysts are suggested for future application in metal-sulfur/gas battery and beyond.This review is expected to drive and benefit future research on rational catalyst design with multi-parameter synergistic impacts on the activity and stability of next-generation metal battery,thus opening new avenue for sustainable solution to climate change,energy and environmental issues,and the potential industrial economy.

COMPLETE KAHLER METRICS WITH POSITIVE HOLOMORPHIC SECTIONAL CURVATURES ON CERTAIN LINE BUNDLES(RELATED TO A COHOMOGENEITY ONE POINT OF VIEW ON A YAU CONJECTURE)

In this article,we study Kahler metrics on a certain line bundle over some compact Kahler manifolds to find complete Kahler metrics with positive holomorphic sectional(or bisectional)curvatures.Thus,we apply a strategy to a famous Yau conjecture with a co-homogeneity one geometry.

Monitoring Surface Deformation Using Distributed Scatterers InSAR

In the past two decades,extensive and in-depth research has been conducted on Time Series InSAR technology with the advancement of high-performance SAR satellites and the accumulation of big SAR data.The introduction of distributed scatterers in Distributed Scatterers InSAR(DS-InSAR)has significantly expanded the application scenarios of InSAR geodetic measurement by increasing the number of measurement points.This study traces the history of DS-InSAR,presents the definition and characteristics of distributed scatterers,and focuses on exploring the relationships and distinctions among proposed algorithms in two crucial steps:statistically homogeneous pixel selection and phase optimization.Additionally,the latest research progress in this field is tracked and the possible development direction in the future is discussed.Through simulation experiments and two real InSAR case studies,the proposed algorithms are compared and verified,and the advantages of DS-InSAR in deformation measurement practice are demonstrated.This work not only offers insights into current trends and focal points for theoretical research on DS-InSAR but also provides practical cases and guidance for applied research.

The Contribution of United States Aircraft Reconnaissance Data to the China Meteorological Administration Tropical Cyclone Intensity Data:An Evaluation of Homogeneity

This paper investigates the homogeneity of United States aircraft reconnaissance data and the impact of these data on the homogeneity of the tropical cyclone(TC)best track data for the seasons 1949-1987 generated by the China Meteorological Administration(CMA).The evaluation of the reconnaissance data shows that the minimum central sea level pressure(MCP)data are relatively homogeneous,whereas the maximum sustained wind(MSW)data show both overestimations and spurious abrupt changes.Statistical comparisons suggest that both the reconnaissance MCP and MSW were well incorporated into the CMA TC best track dataset.Although no spurious abrupt changes were evident in the reconnaissance-related best track MCP data,two spurious changepoints were identified in the remainder of the best-track MCP data.Furthermore,the influence of the reconnaissance MSWs seems to extend to the best track MSWs unrelated to reconnaissance,which might reflect the optimistic confidence in making higher estimates due to the overestimated extreme wind“observations”.In addition,the overestimation of either the reconnaissance MSWs or the best track MSWs was greater during the early decades compared to later decades,which reflects the important influence of reconnaissance data on the CMA TC best track dataset.The wind-pressure relationship(WPR)used in the CMA TC best track dataset is also evaluated and is found to overestimate the MSW,which may lead to inhomogeneity within the dataset between the aircraft reconnaissance era and the satellite era.

Efficient Removal of Phosphate from Aqueous Solutions Using Corundum-hollow-spheres Supported Caclined Hydrotalcite Porous Thin Films

Phosphate was removed from aqueous environment by corundum-hollow-spheres supported caclined hydrotalcite (cHT) thin films. Mg-Al-CO3 hydrotalcite (HT) thin films were deposited on corundumhollow-sphere substrates by hydrothermal homogeneous precipitation at 120℃for 30-240 min and cHT thin films were obtained by annealing of the HT thin films at 500℃for 180 min. Their crystal phase, morphology and microstructure were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM).The results show that homogeneous, well-crystallized and hierarchical flower-like thin films were deposited firmly on the surface of the corundum. The mechanism of nucleation and growth of the HT thin films was fitted well with the anion coordination polyhedron growth unit model. To determine the absorption of phosphate by this adsorbent, different bed depth (10-30 cm) and flow rate (1.0-3.0 m L/min) were examined by column experiments. The highest removal efficiency of phosphate amounted to 98.5%under optimum condition (pH=7.2). The adsorption capacity increased as the bed depth increased and decreased as the flow rate increased.

A macro-mesoscopic constitutive model for porous and cracked rock under true triaxial conditions

The complex mechanical and damage mechanisms of rocks are intricately tied to their diverse mineral compositions and the formation of pores and cracks under external loads.Numerous rock tests reveal a complex interplay between the closure of porous defects and the propagation of induced cracks,presenting challenges in accurately representing their mechanical properties,especially under true triaxial stress conditions.This paper proposes a conceptualization of rock at the mesoscopic level as a two-phase composite,consisting of a bonded medium matrix and frictional medium inclusions.The bonded medium is characterized as a mesoscopic elastic material,encompassing various minerals surrounding porous defects.Its mechanical properties are determined using the mixed multi-inclusion method.Transformation of the bonded medium into the frictional medium occurs through crack extension,with its elastoplastic properties defined by the DruckerePrager yield criterion,accounting for hardening,softening,and extension.MorieTanaka and Eshelby’s equivalent inclusion methods are applied to the bonded and frictional media,respectively.The macroscopic mechanical properties of the rock are derived from these mesoscopic media.Consequently,a True Triaxial Macro-Mesoscopic(TTMM)constitutive model is developed.This model effectively captures the competitive effect and accurately describes the stress-deformation characteristics of granite.Utilizing the TTMM model,the strains resulting from porous defect closure and induced crack extension are differentiated,enabling quantitative determination of the associated damage evolution.

Porous nanofibrous dressing enables mesenchymal stem cell spheroid formation and delivery to promote diabetic wound healing

Delayed and nonhealing of diabetic wounds imposes substantial economic burdens and physical pain on patients.Mesenchymal stem cells(MSCs)promote diabetic wound healing.Particularly when MSCs aggregate into multicellular spheroids,their therapeutic effect is enhanced.However,traditional culture platforms are inadequate for the efficient preparation and delivery of MSC spheroids,resulting in inefficiencies and inconveniences in MSC spheroid therapy.In this study,a three-dimensional porous nanofibrous dressing(NFD)is prepared using a combination of electrospinning and homogeneous freeze-drying.Using thermal crosslinking,the NFD not only achieves satisfactory elasticity but also maintains notable cytocompatibility.Through the design of its structure and chemical composition,the NFD allows MSCs to spontaneously form MSC spheroids with controllable sizes,serving as MSC spheroid delivery systems for diabetic wound sites.Most importantly,MSC spheroids cultured on the NFD exhibit improved secretion of vascular endothelial growth factor,basic fibroblast growth factor,and hepatocyte growth factor,thereby accelerating diabetic wound healing.The NFD provides a competitive strategy for MSC spheroid formation and delivery to promote diabetic wound healing.

Effect of carbon material and surfactant on ink property and resulting surface cracks of fuel-cell microporous layers

Ensuring the consistency of electrode structure in proton-exchange-membrane fuel cells is highly desired yet challenging because of wide-existing and unguided cracks in the microporous layer(MPL). The first thing is to evaluate the homogeneity of MPL with cracks quantitatively. This paper proposes the homogeneity index of a full-scale MPL with an area of 50 cm~2, which is yet to be reported in the literature to our knowledge. Besides, the effects of the carbon material and surfactant on the ink and resulting MPL structure have been studied. The ink with a high network development degree produces an MPL with low crack density, but the ink with high PDI produces an MPL with low crack homogeneity. The polarity of the surfactant and the non-polarity of polytetrafluoroethylene(PTFE) are not mutually soluble,resulting in the heterogeneous PTFE distribution. The findings of this study provide guidelines for MPL fabrication.

Highly ordered crystallization of α-FAPbl_(3) films via homogeneous seeds for efficient perovskite solar cells

Formamidine lead triiodide(FAPbI_(3))perovskites have become the most promising photovoltaic materials for perovskite solar cells with record power conversion efficiency(PCE).However,random nucleation,phase transition,and lattice defects are still the key challenges limiting the quality of FAPbI_(3) films.Previous studies show that the introduction or adding of seeds in the precursor is effective to promote the nucleation and crystallization of perovskite films.Nevertheless,the seed-assisted approach focuses on heterogeneous seeds or hetero-composites,which inevitably induce a lattice-mismatch,the genera-tion of strain or defects,and the phase segregation in the perovskite films.Herein,we first demonstrate that high-quality perovskite films are controllably prepared using α-and δ-phases mixed FAPbI_(3) micro-crystal as the homogeneous seeds with the one-step antisolvent method.The partially dissolved seeds with suitable sizes improve the crystallinity of the perovskite flm with preferable orientation,improved carrier lifetime,and increased carrier mobility.More importantly,the α-phase-containing seeds promote the formation of α-phase FAPbI_(3) films,leading to the reduction of residual lattice strain and the suppres-sion of I-ion migration.Besides,the adding of dimethyl 2,6-pyridine dicarboxylate(DPD)into the pre-cursor further suppresses the generation of defects,contributing to the PCE of devices prepared in air ambient being significantly improved to 23.75%,among the highest PCEs for fully air-processed FAPbI_(3) solar cells.The unpackaged target devices possess a high stability,maintaining 80%of the initial PCE under simulated solar illumination exceeding 800 h.

Delineating homogeneous domains of fractured rocks using topological manifolds and deep learning

Determining homogeneous domains statistically is helpful for engineering geological modeling and rock mass stability evaluation.In this text,a technique that can integrate lithology,geotechnical and structural information is proposed to delineate homogeneous domains.This technique is then applied to a high and steep slope along a road.First,geological and geotechnical domains were described based on lithology,faults,and shear zones.Next,topological manifolds were used to eliminate the incompatibility between orientations and other parameters(i.e.trace length and roughness)so that the data concerning various properties of each discontinuity can be matched and characterized in the same Euclidean space.Thus,the influence of implicit combined effect in between parameter sequences on the homogeneous domains could be considered.Deep learning technique was employed to quantify abstract features of the characterization images of discontinuity properties,and to assess the similarity of rock mass structures.The results show that the technique can effectively distinguish structural variations and outperform conventional methods.It can handle multisource engineering geological information and multiple discontinuity parameters.This technique can also minimize the interference of human factors and delineate homogeneous domains based on orientations or multi-parameter with arbitrary distributions to satisfy different engineering requirements.