Steam flooding is a widely used technique to enhance oil recovery of heavy oil.Thermal viscosity reduction and distillation effect are considered as two main displacement mechanisms in steam flooding process.However,t...Steam flooding is a widely used technique to enhance oil recovery of heavy oil.Thermal viscosity reduction and distillation effect are considered as two main displacement mechanisms in steam flooding process.However,the molecular composition understanding and contribution for oil production are still unclear.In this study,the composition analysis of the heavy oil was investigated in the core scale steam flooding process with the temperature from 120 to 280℃.The crude oil,produced oils and residual oils were characterized comprehensively by gas chromatography and high-resolution mass spectrometry.It is found that steam flooding preferentially extracts aromatics and remains more resins in the residual oil.Viscosity reduction is the dominant mechanism when steam is injected at a low temperature.Large molecular heteroatoms with high carbon number and high double bond equivalent(DBE)are eluted into the produced oil,while compounds with low carbon number and low DBE are remained in the residual oil.As the steam temperature rises,the increased distillation effect results in the extraction of light hydrocarbons from the residual oil to the produced oil.More small heteroatoms with low carbon number and low DBE enter into the produced oil,especially in the none water cut stage.The compositional difference of produced oils is characterized in DBE versus carbon number distribution of the N and O containing compound classes.This work uses a variety of composition analysis methods to clarify the steam flooding mechanism and provides a novel understanding of steam flooding mechanisms with various temperatures and production stages from the molecular perspective.展开更多
This paper presents a new development scheme of simultaneous injection and production in a single horizontal well drilled for developing small block reservoirs or offshore reservoirs. It is possible to set special pac...This paper presents a new development scheme of simultaneous injection and production in a single horizontal well drilled for developing small block reservoirs or offshore reservoirs. It is possible to set special packers within the long completion horizontal interval to establish an injection zone and a production zone. This method can also be used in steam flooding after steam soak through a horizontal well. Simulation results showed that it was desirable to start steam flooding after six steam soaking cycles and at this time the oil/steam ratio was 0.25 and oil recovery efficiency was 23.48%. Steam flooding performance was affected by separation interval and steam injection rate. Reservoir numerical simulation indicated that maximum oil recovery would be achieved at a separation section of 40-50 m at steam injection rate of 100-180 t/d; and the larger the steam injection rate, the greater the water cut and pressure difference between injection zone and production zone. A steam injection rate of 120 t/d was suitable for steam flooding under practical injection-production conditions. All the results could be useful for the guidance of steam flooding projects.展开更多
To improve the oil recovery and economic efficiency in heavy oil reservoirs in late steam flooding,taking J6 Block of Xinjiang Oilfield as the research object,3D physical modeling experiments of steam flooding,CO2-foa...To improve the oil recovery and economic efficiency in heavy oil reservoirs in late steam flooding,taking J6 Block of Xinjiang Oilfield as the research object,3D physical modeling experiments of steam flooding,CO2-foam assisted steam flooding,and CO2 assisted steam flooding under different perforation conditions are conducted,and CO2-assisted steam flooding is proposed for reservoirs in the late stage of steam flooding.The experimental results show that after adjusting the perforation in late steam flooding,the CO2 assisted steam flooding formed a lateral expansion of the steam chamber in the middle and lower parts of the injection well and a development mode for the production of overriding gravity oil drainage in the top chamber of the production well;high temperature water,oil,and CO2 formed stable low-viscosity quasi-single-phase emulsified fluid;and CO2 acted as a thermal insulation in the steam chamber at the top,reduced the steam partial pressure inside the steam chamber,and effectively improved the heat efficiency of injected steam.Based on the three-dimensional physical experiments and the developed situation of the J6 block in Xinjiang Oilfield,the CO2 assisted steam flooding for the J6 block was designed.The application showed that the CO2 assisted steam flooding made the oil vapor ratio increase from 0.12 to 0.16 by 34.0%,the oil recovery increase from 16.1%to 21.5%,and the final oil recovery goes up to 66.5%compared to steam flooding after perforation adjustment.展开更多
The heavy oil reservoirs are currently mainly targeted by thermal enhanced oil recovery technologies,particularly,steam flooding.Steam flooding is carried out by introducing heat into the reservoir to unlock the recov...The heavy oil reservoirs are currently mainly targeted by thermal enhanced oil recovery technologies,particularly,steam flooding.Steam flooding is carried out by introducing heat into the reservoir to unlock the recovery of heavy oil by reducing oil viscosity.Several investigations were carried out to improve oil recovery by steam flooding.Most recently,high steam flooding is reported as an effective approach to improve recovery in high pressure heavy oil reservoirs.The oil recovery from steam flooding is sub-stantially affected by the steam quality and injection temperature.In this study,an attempt was made to look into the integration of parameters,i.e.steam quality and injection temperature upon steam flooding on oil recovery by using a simulation approach via ECLIPSE.The results obtained indicated that high temperature along with the moderate value of steam quality gives the best result regarding oil recovery for steam flooding in an economical way.展开更多
Steam flooding with the assistance of carbon dioxide (CO_(2)) and chemicals is an effective approach for enhancing super heavy oil recovery. However, the promotion and application of CO_(2) and chemical agent-assisted...Steam flooding with the assistance of carbon dioxide (CO_(2)) and chemicals is an effective approach for enhancing super heavy oil recovery. However, the promotion and application of CO_(2) and chemical agent-assisted steam flooding technology have been restricted by the current lack of research on the synergistic effect of CO_(2) and chemical agents on enhanced steam flooding heat transfer. The novel experiments on CO_(2)–chemicals cooperate affected steam condensation and seepage were conducted by adding CO_(2) and two chemicals (sodium dodecyl sulfate (SDS) and the betaine temperature-salt resistant foaming agent ZK-05200).According to the experimental findings, a “film” formed on the heat-transfer medium surface following the co-injection of CO_(2) and the chemical to impede the steam heat transfer, reducing the heat transfer efficiency of steam, heat flux and condensation heat transfer coefficient. The steam seepage experiment revealed that the temperature at the back end of the sandpack model was dramatically raised by 3.5–12.8 °C by adding CO_(2) and chemical agents, achieving the goal of driving deep-formation heavy oil. The combined effect of CO_(2) and SDS was the most effective for improving steam heat transfer, the steam heat loss was reduced by 6.2%, the steam condensation cycle was prolonged by 1.3 times, the condensation heat transfer coefficient was decreased by 15.5%, and the heavy oil recovery was enhanced by 9.82%. Theoretical recommendations are offered in this study for improving the CO_(2)–chemical-assisted steam flooding technique.展开更多
Steam-assisted gravity drainage(SAGD)is a mature technology for bitumen recovery from oil sands.However,it is an energy-intensive process that requires large amounts of steam to heat and mobilize bitumen.The purpose o...Steam-assisted gravity drainage(SAGD)is a mature technology for bitumen recovery from oil sands.However,it is an energy-intensive process that requires large amounts of steam to heat and mobilize bitumen.The purpose of this work is to develop ways to enhance SAGD performance through the use of organic base additives.The research is approached from three focus areas that supplement and guide each other:characterization tests,sand-pack floods,and computational simulation.A number of key mechanisms for enhancing oil recovery were identified,high-temperature additive characterization tests were developed,and promising alkalis were tested in porous media.Simulation was employed to history-match sandpack flood production data,in order to demonstrate the effect of an additive on the oil–water relative permeability.Based on these results,it was concluded that oxygenated organic bases had the most potential for improving bitumen recovery through reducing the oil–water interfacial tension(IFT)by increasing the pH of the system.These organic bases favorably modify the interfacial energies between the immiscible oil–water phases and enable them to flow easily through the porous media during production.Sand-pack flood tests have successfully demonstrated a 10%–15%improvement in bitumen recovery,over baseline,in the presence of IFT-reducing additives.Simulation results further showed that an IFT reduction had a positive impact on SAGD performance.This work demonstrates the potential of organic bases to improve not only SAGD,but other steam injection processes.Furthermore,a number of experimental methods were developed,tried,and tested during the course of this work.展开更多
文摘Steam flooding is a widely used technique to enhance oil recovery of heavy oil.Thermal viscosity reduction and distillation effect are considered as two main displacement mechanisms in steam flooding process.However,the molecular composition understanding and contribution for oil production are still unclear.In this study,the composition analysis of the heavy oil was investigated in the core scale steam flooding process with the temperature from 120 to 280℃.The crude oil,produced oils and residual oils were characterized comprehensively by gas chromatography and high-resolution mass spectrometry.It is found that steam flooding preferentially extracts aromatics and remains more resins in the residual oil.Viscosity reduction is the dominant mechanism when steam is injected at a low temperature.Large molecular heteroatoms with high carbon number and high double bond equivalent(DBE)are eluted into the produced oil,while compounds with low carbon number and low DBE are remained in the residual oil.As the steam temperature rises,the increased distillation effect results in the extraction of light hydrocarbons from the residual oil to the produced oil.More small heteroatoms with low carbon number and low DBE enter into the produced oil,especially in the none water cut stage.The compositional difference of produced oils is characterized in DBE versus carbon number distribution of the N and O containing compound classes.This work uses a variety of composition analysis methods to clarify the steam flooding mechanism and provides a novel understanding of steam flooding mechanisms with various temperatures and production stages from the molecular perspective.
文摘This paper presents a new development scheme of simultaneous injection and production in a single horizontal well drilled for developing small block reservoirs or offshore reservoirs. It is possible to set special packers within the long completion horizontal interval to establish an injection zone and a production zone. This method can also be used in steam flooding after steam soak through a horizontal well. Simulation results showed that it was desirable to start steam flooding after six steam soaking cycles and at this time the oil/steam ratio was 0.25 and oil recovery efficiency was 23.48%. Steam flooding performance was affected by separation interval and steam injection rate. Reservoir numerical simulation indicated that maximum oil recovery would be achieved at a separation section of 40-50 m at steam injection rate of 100-180 t/d; and the larger the steam injection rate, the greater the water cut and pressure difference between injection zone and production zone. A steam injection rate of 120 t/d was suitable for steam flooding under practical injection-production conditions. All the results could be useful for the guidance of steam flooding projects.
基金Supported by the China National Science and Technology Major Project(2016ZX05012-002).
文摘To improve the oil recovery and economic efficiency in heavy oil reservoirs in late steam flooding,taking J6 Block of Xinjiang Oilfield as the research object,3D physical modeling experiments of steam flooding,CO2-foam assisted steam flooding,and CO2 assisted steam flooding under different perforation conditions are conducted,and CO2-assisted steam flooding is proposed for reservoirs in the late stage of steam flooding.The experimental results show that after adjusting the perforation in late steam flooding,the CO2 assisted steam flooding formed a lateral expansion of the steam chamber in the middle and lower parts of the injection well and a development mode for the production of overriding gravity oil drainage in the top chamber of the production well;high temperature water,oil,and CO2 formed stable low-viscosity quasi-single-phase emulsified fluid;and CO2 acted as a thermal insulation in the steam chamber at the top,reduced the steam partial pressure inside the steam chamber,and effectively improved the heat efficiency of injected steam.Based on the three-dimensional physical experiments and the developed situation of the J6 block in Xinjiang Oilfield,the CO2 assisted steam flooding for the J6 block was designed.The application showed that the CO2 assisted steam flooding made the oil vapor ratio increase from 0.12 to 0.16 by 34.0%,the oil recovery increase from 16.1%to 21.5%,and the final oil recovery goes up to 66.5%compared to steam flooding after perforation adjustment.
文摘The heavy oil reservoirs are currently mainly targeted by thermal enhanced oil recovery technologies,particularly,steam flooding.Steam flooding is carried out by introducing heat into the reservoir to unlock the recovery of heavy oil by reducing oil viscosity.Several investigations were carried out to improve oil recovery by steam flooding.Most recently,high steam flooding is reported as an effective approach to improve recovery in high pressure heavy oil reservoirs.The oil recovery from steam flooding is sub-stantially affected by the steam quality and injection temperature.In this study,an attempt was made to look into the integration of parameters,i.e.steam quality and injection temperature upon steam flooding on oil recovery by using a simulation approach via ECLIPSE.The results obtained indicated that high temperature along with the moderate value of steam quality gives the best result regarding oil recovery for steam flooding in an economical way.
基金financial support of the National Nature Science Foundation of China(Grant No.U20B6003)the Natural Science Foundation of Shandong Province,China(ZR2020QE106).
文摘Steam flooding with the assistance of carbon dioxide (CO_(2)) and chemicals is an effective approach for enhancing super heavy oil recovery. However, the promotion and application of CO_(2) and chemical agent-assisted steam flooding technology have been restricted by the current lack of research on the synergistic effect of CO_(2) and chemical agents on enhanced steam flooding heat transfer. The novel experiments on CO_(2)–chemicals cooperate affected steam condensation and seepage were conducted by adding CO_(2) and two chemicals (sodium dodecyl sulfate (SDS) and the betaine temperature-salt resistant foaming agent ZK-05200).According to the experimental findings, a “film” formed on the heat-transfer medium surface following the co-injection of CO_(2) and the chemical to impede the steam heat transfer, reducing the heat transfer efficiency of steam, heat flux and condensation heat transfer coefficient. The steam seepage experiment revealed that the temperature at the back end of the sandpack model was dramatically raised by 3.5–12.8 °C by adding CO_(2) and chemical agents, achieving the goal of driving deep-formation heavy oil. The combined effect of CO_(2) and SDS was the most effective for improving steam heat transfer, the steam heat loss was reduced by 6.2%, the steam condensation cycle was prolonged by 1.3 times, the condensation heat transfer coefficient was decreased by 15.5%, and the heavy oil recovery was enhanced by 9.82%. Theoretical recommendations are offered in this study for improving the CO_(2)–chemical-assisted steam flooding technique.
基金support of this research from The Dow Chemical Company
文摘Steam-assisted gravity drainage(SAGD)is a mature technology for bitumen recovery from oil sands.However,it is an energy-intensive process that requires large amounts of steam to heat and mobilize bitumen.The purpose of this work is to develop ways to enhance SAGD performance through the use of organic base additives.The research is approached from three focus areas that supplement and guide each other:characterization tests,sand-pack floods,and computational simulation.A number of key mechanisms for enhancing oil recovery were identified,high-temperature additive characterization tests were developed,and promising alkalis were tested in porous media.Simulation was employed to history-match sandpack flood production data,in order to demonstrate the effect of an additive on the oil–water relative permeability.Based on these results,it was concluded that oxygenated organic bases had the most potential for improving bitumen recovery through reducing the oil–water interfacial tension(IFT)by increasing the pH of the system.These organic bases favorably modify the interfacial energies between the immiscible oil–water phases and enable them to flow easily through the porous media during production.Sand-pack flood tests have successfully demonstrated a 10%–15%improvement in bitumen recovery,over baseline,in the presence of IFT-reducing additives.Simulation results further showed that an IFT reduction had a positive impact on SAGD performance.This work demonstrates the potential of organic bases to improve not only SAGD,but other steam injection processes.Furthermore,a number of experimental methods were developed,tried,and tested during the course of this work.
