Statistical analysis on the validity of the cold plasma approximation for chorus waves based on Van Allen Probe observations and their effects on radiation belt electrons

Theoretical analysis has demonstrated that the dispersion relation of chorus waves plays an essential role in the resonant interaction and energy transformation between the waves and magnetospheric electrons.Previous quantitative analyses often simplified the chorus dispersion relation by using the cold plasma assumption.However,the applicability of the cold plasma assumption is doubtful,especially during geomagnetic disturbances.We here present a systematic statistical analysis on the validity of the cold plasma dispersion relation of chorus waves based on observations from the Van Allen Probes over the period from 2012 to 2018.The statistical results show that the observed magnetic field intensities deviate substantially from those calculated from the cold plasma dispersion relation and that they become more pronounced with an increase in geomagnetic activity or a decrease in background plasma density.The region with large deviations is mainly concentrated in the nightside and expands in both the radial and azimuthal directions as the geomagnetic activity increases or the background plasma density decreases.In addition,the bounce-averaged electron scattering rates are computed by using the observed and cold plasma dispersion relation of chorus waves.Compared with usage of the cold plasma dispersion relation,usage of the observed dispersion relation considerably lowers the minimum resonant energy of electrons and lowers the scattering rates of electrons above tens of kiloelectronvolts but enhances those below.Furthermore,these differences are more pronounced with the enhancement of geomagnetic activity or the decrease in background plasma density.

Frontogenesis and Frontolysis of a Cold Filament Driven by the Cross-Filament Wind and Wave Fields Simulated by a Large Eddy Simulation

The variations of the frontogenetic trend of a cold filament induced by the cross-filament wind and wave fields are studied by a non-hydrostatic large eddy simulation. Five cases with different strengths of wind and wave fields are studied.The results show that the intense wind and wave fields further break the symmetries of submesoscale flow fields and suppress the levels of filament frontogenesis. The changes of secondary circulation directions—that is, the conversion between the convergence and divergence of the surface cross-filament currents with the downwelling and upwelling jets in the filament center—are associated with the inertial oscillation. The filament frontogenesis and frontolysis caused by the changes of secondary circulation directions may periodically sharpen and smooth the gradient of submesoscale flow fields.The lifecycle of the cold filament may include multiple stages of filament frontogenesis and frontolysis.

MIR1868 negatively regulates rice cold tolerance at both the seedling and booting stages

Low temperature causes rice yield losses of up to 30%–40%,therefore increasing its cold tolerance is a breeding target.Few genes in rice are reported to confer cold tolerance at both the vegetative and reproductive stages.This study revealed a rice-specific 24-nt miRNA,miR1868,whose accumulation was suppressed by cold stress.Knockdown of MIR1868 increased seedling survival,pollen fertility,seed setting,and grain yield under cold stress,whereas its overexpression conferred the opposite phenotype.Knockdown of MIR1868 increased reactive oxygen species(ROS)scavenging and soluble sugar content under cold stress by increasing the expression of peroxidase genes and sugar metabolism genes,and its overexpression produced the opposite effect.Thus,MIR1868 negatively regulated rice cold tolerance via ROS scavenging and sugar accumulation.

Microstructural evolution during hot and cold deformation of Ti-36Nb-2Ta-3Zr-0.35O alloy

The Ti-36Nb-2Ta-3Zr-0.350 （mass fraction, %） （TNTZO） alloy was produced by cold isostatic pressing and sintering from elemental powders, followed by hot and cold deformation. The effects of deformation process on microstructures and mechanical properties were investigated using the SEM, TEM, OM and the universal material testing machine. Results show that the alloy can be easily hot forged and cold swaged due to the fine-grained microstructure. Only after cold swaging by 85%, the alloy shows the typical ＂marble-like＂ structure. And thecold deformation is accompanied by stress-induced a＂ phase transformations. Moreover, both the strength and the ductility of the alloy are significantly improved by hot and cold working.

Removal of diminutive colorectal polyps: A prospective randomized clinical trial between cold snare polypectomy and hot forceps biopsy

AIMTo compare the efficacy and safety of cold snare polypectomy (CSP) and hot forceps biopsy (HFB) for diminutive colorectal polyps.METHODSThis prospective, randomized single-center clinical trial included consecutive patients ≥ 20 years of age with diminutive colorectal polyps 3-5 mm from December 2014 to October 2015. The primary outcome measures were en-bloc resection (endoscopic evaluation) and complete resection rates (pathological evaluation). The secondary outcome measures were the immediate bleeding or immediate perforation rate after polypectomy, delayed bleeding or delayed perforation rate after polypectomy, use of clipping for bleeding or perforation, and polyp retrieval rate. Prophylactic clipping after polyp removal wasn’t routinely performed.RESULTSTwo hundred eight patients were randomized into the CSP (102), HFB (106) and 283 polyps were evaluated (CSP: 148, HFB: 135). The en-bloc resection rate was significantly higher with CSP than with HFB [99.3% (147/148) vs 80.0% (108/135), P < 0.0001]. The complete resection rate was significantly higher with CSP than with HFB [80.4% (119/148) vs 47.4% (64/135), P < 0.0001]. The immediate bleeding rate was similar between the groups [8.6% (13/148) vs 8.1% (11/135), P = 1.000], and endoscopic hemostasis with hemoclips was successful in all cases. No cases of perforation or delayed bleeding occurred. The rate of severe tissue injury to the pathological specimen was higher HFB than CSP [52.6% (71/135) vs 1.3% (2/148), P < 0.0001]. Polyp retrieval failure was encountered CSP (7), HFB (2).CONCLUSIONCSP is more effective than HFB for resecting diminutive polyps. Further long-term follow-up study is required.

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying alloys.In this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot rolling.The microstructure and mechanical properties under different process paramet-ers were investigated.Optical microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening mechanism.The results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering temperature.The block was hot rolled at 1200℃ with an 80%reduction under only two passes without annealing.The strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain boundaries.After hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

Flow characteristics and hot workability of a typical low-alloy high-strength steel during multi-pass deformation

Heavy components of low-alloy high-strength(LAHS) steels are generally formed by multi-pass forging. It is necessary to explore the flow characteristics and hot workability of LAHS steels during the multi-pass forging process, which is beneficial to the formulation of actual processing parameters. In the study, the multi-pass hot compression experiments of a typical LAHS steel are carried out at a wide range of deformation temperatures and strain rates. It is found that the work hardening rate of the experimental material depends on deformation parameters and deformation passes, which is ascribed to the impacts of static and dynamic softening behaviors. A new model is established to describe the flow characteristics at various deformation passes. Compared to the classical Arrhenius model and modified Zerilli and Armstrong model, the newly proposed model shows higher prediction accuracy with a confidence level of 0.98565. Furthermore, the connection between power dissipation efficiency(PDE) and deformation parameters is revealed by analyzing the microstructures. The PDE cannot be utilized to reflect the efficiency of energy dissipation for microstructure evolution during the entire deformation process, but only to assess the efficiency of energy dissipation for microstructure evolution in a specific deformation parameter state.As a result, an integrated processing map is proposed to better study the hot workability of the LAHS steel, which considers the effects of instability factor(IF), PDE, and distribution and size of grains. The optimized processing parameters for the multi-pass deformation process are the deformation parameters of 1223–1318 K and 0.01–0.08 s^(-1). Complete dynamic recrystallization occurs within the optimized processing parameters with an average grain size of 18.36–42.3 μm. This study will guide the optimization of the forging process of heavy components.

Anthropogenic Influence on Decadal Changes in Concurrent Hot and Dry Events over China around the Mid-1990s

The frequency and duration of observed concurrent hot and dry events(HDEs) over China during the growing season(April–September) exhibit significant decadal changes across the mid-1990s. These changes are characterized by increases in HDE frequency and duration over most of China, with relatively large increases over southeastern China(SEC), northern China(NC), and northeastern China(NEC). The frequency of HDEs averaged over China in the present day(PD,1994–2011) is double that in the early period(EP, 1964–81);the duration of HDEs increases by 60%. Climate experiments with the Met Office Unified Model(MetUM-GOML2) are used to estimate the contributions of anthropogenic forcing to HDE decadal changes over China. Anthropogenic forcing changes can explain 60%–70% of the observed decadal changes,suggesting an important anthropogenic influence on HDE changes over China across the mid-1990s. Single-forcing experiments indicate that the increase in greenhouse gas(GHG) concentrations dominates the simulated decadal changes,increasing the frequency and duration of HDEs throughout China. The change in anthropogenic aerosol(AA) emissions significantly decreases the frequency and duration of HDEs over SEC and NC, but the magnitude of the decrease is much smaller than the increase induced by GHGs. The changes in HDEs in response to anthropogenic forcing are mainly due to the response of climatological mean surface air temperatures. The contributions from changes in variability and changes in climatological mean soil moisture and evapotranspiration are relatively small. The physical processes associated with the response of HDEs to GHG and AA changes are also revealed.

Efficacy and adverse events of cold vs hot polypectomy: A meta-analysis

AIM: To compare previously reported randomized controlled studies (RCTs) of cold and hot polypectomy, we systematically reviewed and clarify the utility of cold polypectomy over hot with respect to efficacy and adverse events.METHODS: A meta-analysis was conducted to evaluate the predominance of cold and hot polypectomy for removing colon polyps. Published articles and abstracts from worldwide conferences were searched using the keywords “cold polypectomy”. RCTs that compared either or both the effects or adverse events of cold polypectomy with those of hot polypectomy were collected. The patients’ demographics, endoscopic procedures, No. of examined lesions, lesion size, macroscopic and histologic findings, rates of incomplete resection, bleeding amount, perforation, and length of procedure were extracted from each study. A forest plot analysis was used to verify the relative strength of the effects and adverse events of each procedure. A funnel plot was generated to assess the possibility of publication bias.RESULTS: Ultimately, six RCTs were selected. No significant differences were noted in the average lesion size (less than 10 mm) between the cold and hot polypectomy groups in each study. Further, the rates of complete resection and adverse events, including delayed bleeding, did not differ markedly between cold and hot polypectomy. The average procedural time in the cold polypectomy group was significantly shorter than in the hot polypectomy group.CONCLUSION: Cold polypectomy is a time-saving procedure for removing small polyps with markedly similar curability and safety to hot polypectomy.

Cold acclimation improves photosynthesis by regulating the ascorbate–glutathione cycle in chloroplasts of Kandelia obovata

As the most northerly mangrove species in China, Kandelia obovata may undergo extreme cold event stress. Enhancing the cold tolerance of this species is crucial to its successful afforestation. This study aimed to determine the resistance of K. obovata seedlings to low temperature stress by cold acclimation and to explain the mechanisms for alleviating cold injury. To understand these mechanisms, seedlings that were acclimatized and not acclimatized were exposed to 5℃/- 2℃(day/night)for 48 h.Results showed that low temperature stress reduced leaf photosynthesis of non-acclimatized seedlings by inducing oxidative stress and structural damage to chloroplasts. These phenomena were shown by increasing levels of malondialdehyde (MDA), O2-and H2O2, as well as decreasing enzyme activities in the ascorbate–glutathione (AsA-GSH) cycle. However, cold-acclimatized seedlings had improved photosynthetic rates and efficiency of photosystem II (PSII) under low temperature stress. Compared with non-acclimatized seedlings, leaves of coldacclimatized seedlings under low temperature stress for 48 h exhibited higher anti-oxidative enzyme activities, lower levels of O2^- and H2O2, less damage to chloroplast structure, and removed 33.7% of MDA at low temperature stress for 48 h. The data indicate that cold acclimation enhances photosynthetic capacity by effectively regulating activation in the PSII electron transport and the AsA–GSH cycle to scavenge excess ROS in chloroplasts, while the latter is more important.

Comment on 'Efficacy and adverse events of cold vs hot polypectomy: A meta-analysis'

This is a comment on a meta-analysis of published studies comparing cold vs hot polypectomy. We believe that the conclusion of this meta-analysis that "cold polypectomy is a time-saving procedure for removing small polyps with markedly similar curability and safety to hot polypectomy" needs more rigorous evidence.

Endogenous serotonin induced by cold acclimation increases cold tolerance by reshaping the MEL/ROS/RNS redox network in Kandelia obovata

Cold stress severely limits the distribution of mangrove species worldwide and it remains unclear how mangroves respond and adapt to cold temperatures.In this study,we investigated the effects of cold acclimation and/or inhibition of serotonin levels on reactive oxygen species(ROS),reactive nitrogen species(RNS),melatonin(MEL)and serotonin(SER)accumulation during cold stress in Kandelia obovata.Morphologic observation and param-eter analysis revealed that cold acclimation mitigated the photoinhibition of photosystem I(PSI)and photosystem II(PSII),maintained optimal ROS and RNS redox homeosta-sis,and increased the contents of SER and MEL in leaves.This suggests that cold acclimation reshapes the MEL/ROS/RNS redox network.In particular,the tryptophan/tryptamine/Ser/N-acetylserotonin/MER pathway was identi-fied as a branch of the MEL synthesis pathway.Inhibition of endogenous SER exacerbated damage caused by cold stress,indicating the crosstalk of SER synthesis and cold acclima-tion.In this study,we report a coordinated regulation of cold stress by a complex defense network in K.obovata.

Chemical Properties of Pectin from Industry Hot and Cold Break Tomato Products

Tomato processing includes a break step, which involves rapid heating of freshly chopped tomatoes to >90°C for hot break, or 60°C to 77°C for cold break. Pectolytic enzyme deactivation is believed to be the key element in the hot break step;therefore, pectin content of different products should be qualitatively distinct. The objective of this study was to investigate the effect of hot break versus cold break on the cell-wall pectin of tomato. Cell-wall pectin from hot and cold break tomato products was isolated and analyzed for carbohydrate composition, degree of polymerization, and degree of esterification. The results showed no observable differences in the cell-wall pectin isolated from the two products, indicating that there was no significant pectolytic breakdown of the tomato in the cold break product, and the pectin might not, by itself, contribute to the differences in the final product viscosity resulting from the two processing techniques.

Two-stage dynamic recrystallization and texture evolution in Al-7Mg alloy during hot torsion

Hot torsion tests were performed on the Al-7Mg alloy at the temperature ranging from 300 to 500℃ and strain rates between 0.05 and 5 s^(-1) to explore the progressive dynamic recrystallization(DRX)and texture behaviors.The DRX behavior of the alloy manifested two distinct stages:Stage 1 at strain of≤2 and Stage 2 at strains of≥2.In Stage 1,there was a slight increase in the DRXed grain fraction(X_(DRX))with predominance of discontinuous DRX(DDRX),followed by a modest change in X_(DRX) until the transition to Stage 2.Stage 2 was marked by an accelerated rate of DRX,culminating in a substantial final X_(DRX) of~0.9.Electron backscattered diffraction(EBSD)analysis on a sample in Stage 2 revealed that continuous DRX(CDRX)predominantly occurred within the(121)[001]grains,whereas the(111)[110]grains underwent a geometric DRX(GDRX)evolution without a noticeable sub-grain structure.Furthermore,a modified Avrami’s DRX kinetics model was utilized to predict the microstructural refinement in the Al-7Mg alloy during the DRX evolution.Although this kinetics model did not accurately capture the DDRX behavior in Stage 1,it effectively simulated the DRX rate in Stage 2.The texture index was employed to assess the evolution of the texture isotropy during hot-torsion test,demonstrating significant improvement(>75%)in texture randomness before the commencement of Stage 2.This initial texture evolution is attributed to the rotation of parent grains and the substructure evolution,rather than to an increase in X_(DRX).

Cold snare polypectomy:A closer look at the efficacy and limitations for polyps 10-20 mm in size

Current guidelines recommend cold snare polypectomy for polyps less than 10 mm in size.Conversely,endoscopic mucosal resection is still the preferred technique for larger polyps.Concerns regarding cold snare polypectomy for larger polyps revolve around the difficulty in conducting en-bloc resection(resulting in piecemeal removal),and the potential for local residual polyp tissue and a high rate of recurrence.On the other hand,cold snare technique has the advantages of shortening procedure time,reducing delayed bleeding risks and lowering cost of treatment.Numerous ongoing and recent studies are focused on evaluating the risks and benefits of this technique for polyps larger than 10 mm,with the goal of providing clear guidelines in the near future.The aim of this editorial is to provide our readers with an overview regarding this subject and the latest developments surrounding it.

Partially crystallized Pd nanoparticles decorated TiO_2 prepared by atmospheric-pressure cold plasma and its enhanced photocatalytic performance

TiO2 decorated with partially crystallized Pd nanoparticles （Pd/TiO2-P） was successfully prepared by atmospheric-pressure dielectric barrier discharge cold plasma. The XRD and XPS analyses proved that Pd ions were reduced to partially crystallized metallic Pd nanoparticles in Pd/TiO2-P. The XPS spectra also indicated that an enhanced metal-support interaction was formed due to the existence of partially crystallized Pd nanoparticles with lower coordination number in Pd/TiO2-P. Photocatalytic activity of Pd/TiO2-P was much higher than that of TiO2 samples decorated with well crystallized Pd nanoparticles.

Effect of β-Glucan (Angel Yeast) Compared to a Placebo on Cold and Flu Incidence and Symptoms in an Adult Population—A Double Blind, Randomised Controlled Trial

Background: 1-3, 1-6 β-glucan derived from Baker’s yeast (Saccharomyces cerevisiae) has been widely studied for its immune stimulatory capabilities and safety. Previous studies found β-glucan to have efficacy at reducing incidence of URTIs as well as being a low risk for negative side effects. The current study aimed to examine the effects of yeast β-glucan (Angel Yeast) on cold and flu incidences and symptoms in healthy adults. Methods: Two hundred and thirty-one males and females aged 18 to 65 years old supplemented with either β-glucan or a placebo for 3-months. Participants completed a general health questionnaire every 4 weeks and in addition, if participants experienced any cold or flu symptoms, these were recorded daily (along with severity) until resolved or up to 2 weeks. Results: Supplementation with β-glucan reduced the self-reported severity of sore throats and improved sleep quality compared to the placebo group. Conclusions: Yeast β-glucan supplementation appears to be able to help reduce certain symptoms experienced during a cold or flu episode and is safe and well tolerated.

Experimental research and application of cold cutting to hot stamping parts based on multiphase microstructure

Among the bottlenecks that hinder the improvement of the production efficiency of hot stamping are high strength and difficulty in edge cutting and hole punching.Starting from the preparation of hot stamping multiphase microstructure materials,this paper developed a plate quenching die system with controllable surface temperature and prepared four types of hot stamping plates with different martensite volume fractions.Then,straight edge cold cutting experiments were performed to study the influence of cutting clearance and cutting force on fracture quality.The results show that the bright zone is the largest when the cutting clearance is 0.14 mm,and the cutting experience coefficient of the hot stamping sheet with each martensite volume fraction is obtained when the cutting clearance is 0.14 mm.The research results of this paper were applied to the production of hot stamping parts.

Two stages power generation test of the hot dry rock exploration and production demonstration project in the Gonghe Basin,northeastern Qinghai-Tibet plateau,China

The Hot Dry Rock(HDR)is considered as a clean and renewable energy,poised to significantly contribute to the global energy decarbonization agenda.Many HDR projects worldwide have accumulated valuable experience in efficient drilling and completion,reservoir construction,and fracture simulation.In 2019,China Geological Survey(CGS)initiated a demonstration project of HDR exploration and production in the Gonghe Basin,aiming to overcome the setbacks faced by HDR projects.Over the ensuing four years,the Gonghe HDR project achieved the first power generation in 2021,followed by the second power generation test in 2022.After establishing the primary well group in the initial phase,two directional wells and one branch well were drilled.Noteworthy progress was made in successfully constructing the targeted reservoir,realizing inter-well connectivity,power generation and grid connection,implementing of the real-time micro-seismic monitoring.A closed-loop technical validation of the HDR exploration and production was completed.However,many technical challenges remain in the process of HDR industrialization,such as reservoir fracture network characterization,efficient drilling and completion,multiple fracturing treatment,continuous injection and production,as well as mitigation of induced seismicity and numerical simulation technology.

Void Fraction Distributions in Cold-gassed and Hot-sparged Three Phase Stirred Tanks with Multi-impeller

Vertical distributions of void fraction in gas-liquid and gas-liquid-solid stirred tanks have been measured in a fully baffled dished base vessel of 0.48 m diameter, using a conductivity probe. The impeller configuration （a hollow half elliptical blade dispersing turbine below two up-pumping wide blade hydrofoils, identified as HEDT＋2WHu） recommended in previous work has been used in this work. The operating temperatures were 24℃ and 81℃, identified as cold and hot respectively. The effects of superficial gas velocity, agitator speed and the corresponding power input on the local void fraction in two-phase systems are .investigated and discussed. Results show thatth-e increasing of agitator speed or gas flow rate leads to an increase in local-void fraction at the majority of measurement points in both cold and hot systems. However, the unifo,rmity of gas dispersion does not always in crease as the raising of agitator speed and power input. In either cold or hot sparged conditions, the two- and three-phase systems.have similar vertical profiles for void fraction, with maxima in similar locations; however, the void fractions are significantly lower in hot sparging than with cold. In cold operation the presence of particles leads to a lower void fraction at most points, although the local void fractions increase a little with the addition of solid particles at high temperature, in good agreement with the global gas holdup results, and the possible reasons are discussed in this paper. This work can give a better understanding of the differences between cold-gassed and hot-sparged three phase＇stirred tanks.