The equilibrium phases and adiabatic temperature for combustion synthesis and reaction hot pressing of Al 2O 3/B 4C employing ① Al, B 2O 3 and C ② C, B, Al 2O 3 as starting reactants were analyzed by the CALP...The equilibrium phases and adiabatic temperature for combustion synthesis and reaction hot pressing of Al 2O 3/B 4C employing ① Al, B 2O 3 and C ② C, B, Al 2O 3 as starting reactants were analyzed by the CALPHAD technique. It is shown that the equilibrium phases at the adiabatic temperature in the combusion system (1) are not the intended composite Al 2O 3/B 4C but other phases. Good agreement with the experimental data was achieved for the calculated adiabatic temperature. The results were discussed with respect to the elimination of the by product in the combustion synthesis. It also revealed that the reactant mixture (2) is a weak exothermic or endothermic reaction system, which can be employed in the reaction hot pressing.展开更多
Decent hot-start effects were here reported in Taq DNA polymerase-based polymerase chain reaction (PCR) when water-soluble CdTe quantum dots (QDs) were employed. The hot-start effects were revealed by the higher ampli...Decent hot-start effects were here reported in Taq DNA polymerase-based polymerase chain reaction (PCR) when water-soluble CdTe quantum dots (QDs) were employed. The hot-start effects were revealed by the higher amplicon yields and distinguished suppression of nonspecific amplification after pre-incubation of PCR mix with quantum dots between 30°C and 56°C. DNA targets were well amplified even after PCR mixture was pre-incubated 3 hr at 30°C or 1 hr at 50°C. Importantly, the effects of QDs nanoparticles could be reversed by increasing the polymerase concentration, suggesting that there was an interaction between QDs and Taq DNA polymerase. Moreover, control experiment indicated that hot-start effect is not primarily due to the reduced polymerase concentration resulted from the above interaction. This study provided another good start to investigate potential implications of quantum dots in key molecular biology techniques.展开更多
A Glaser coupling reaction of terminal alkynes in the presence of nickel chloride without any organics and bases in hot water has been developed, which produces the corresponding homo-coupling products in good yields.
The spheroidiser is a necessary additive to manufacture ductile iron.Sometimes with the same hot metal,spheroidisers and treated technology,reactions differ greatly from each other.The reaction may be quite normal in ...The spheroidiser is a necessary additive to manufacture ductile iron.Sometimes with the same hot metal,spheroidisers and treated technology,reactions differ greatly from each other.The reaction may be quite normal in one case,but very intensive for another one.The effects of kinetic factors such as size,surface area and morphology o f spheroidiser on the reaction of spheoidization are studied.展开更多
Inclusive Intermediate-Mass Fragments（IMFs）are measured at seven angles for the<sup>40</sup>Ar+Ag reaction at 25 MeV/u.The energy spectra of IMF from Li to F are obtained.A thermal mod-el with the same p...Inclusive Intermediate-Mass Fragments（IMFs）are measured at seven angles for the<sup>40</sup>Ar+Ag reaction at 25 MeV/u.The energy spectra of IMF from Li to F are obtained.A thermal mod-el with the same parameters well fits the energy spectra of all IMFs at backward angles.These IMFs areevaporated from hot nuclei formed in an incomplete fusion process.The angular distribution and Z distri-bution are calculated with the statistical code GEMINI.展开更多
Although low salinity water injection(LSWI) has recovered residual oil after the conventional waterflood, highly viscous oil has remained in heavy oil reservoirs. Hot water injection is an economic and practical metho...Although low salinity water injection(LSWI) has recovered residual oil after the conventional waterflood, highly viscous oil has remained in heavy oil reservoirs. Hot water injection is an economic and practical method to improve oil mobility for viscous oil reservoirs. It potentially controls temperature-dependent geochemical reactions underlying the LSWI mechanism and oil viscosity. Therefore, this study has modeled and evaluated a hybrid process of low salinity hot water injection(hot LSWI) to quantify synergistic effects in heavy oil reservoirs. In comparison to seawater injection(SWI) and LSWI, hot LSWI results in more cation ion-exchange(Ca^(2+) and Mg^(2+)) and more wettability modification. Hot LSWI also reduces oil viscosity. In core-scaled systems, it increases oil recovery by 21% and 6% over SWI and LSWI. In a pilotscaled reservoir, it produces additional oil by 6% and 3% over SWI and LSWI. Probabilistic forecasting with uncertainty assessment further evaluates the feasibility of hot LSWI to consider uncertainty in the pilot-scaled reservoir and observes enhanced heavy oil production. This study confirms the viability of hot LSWI due to synergistic effects including enhanced wettability modification and oil viscosity reduction effects.展开更多
文摘The equilibrium phases and adiabatic temperature for combustion synthesis and reaction hot pressing of Al 2O 3/B 4C employing ① Al, B 2O 3 and C ② C, B, Al 2O 3 as starting reactants were analyzed by the CALPHAD technique. It is shown that the equilibrium phases at the adiabatic temperature in the combusion system (1) are not the intended composite Al 2O 3/B 4C but other phases. Good agreement with the experimental data was achieved for the calculated adiabatic temperature. The results were discussed with respect to the elimination of the by product in the combustion synthesis. It also revealed that the reactant mixture (2) is a weak exothermic or endothermic reaction system, which can be employed in the reaction hot pressing.
文摘Decent hot-start effects were here reported in Taq DNA polymerase-based polymerase chain reaction (PCR) when water-soluble CdTe quantum dots (QDs) were employed. The hot-start effects were revealed by the higher amplicon yields and distinguished suppression of nonspecific amplification after pre-incubation of PCR mix with quantum dots between 30°C and 56°C. DNA targets were well amplified even after PCR mixture was pre-incubated 3 hr at 30°C or 1 hr at 50°C. Importantly, the effects of QDs nanoparticles could be reversed by increasing the polymerase concentration, suggesting that there was an interaction between QDs and Taq DNA polymerase. Moreover, control experiment indicated that hot-start effect is not primarily due to the reduced polymerase concentration resulted from the above interaction. This study provided another good start to investigate potential implications of quantum dots in key molecular biology techniques.
文摘A Glaser coupling reaction of terminal alkynes in the presence of nickel chloride without any organics and bases in hot water has been developed, which produces the corresponding homo-coupling products in good yields.
文摘The spheroidiser is a necessary additive to manufacture ductile iron.Sometimes with the same hot metal,spheroidisers and treated technology,reactions differ greatly from each other.The reaction may be quite normal in one case,but very intensive for another one.The effects of kinetic factors such as size,surface area and morphology o f spheroidiser on the reaction of spheoidization are studied.
基金①The project supported by the National Natural Science Foundation of China
文摘Inclusive Intermediate-Mass Fragments（IMFs）are measured at seven angles for the<sup>40</sup>Ar+Ag reaction at 25 MeV/u.The energy spectra of IMF from Li to F are obtained.A thermal mod-el with the same parameters well fits the energy spectra of all IMFs at backward angles.These IMFs areevaporated from hot nuclei formed in an incomplete fusion process.The angular distribution and Z distri-bution are calculated with the statistical code GEMINI.
基金financially supported by the Energy Efficiency and Resources of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) Grant funded by the Korea government Ministry of Knowledge Economy (No. 20172510102290)
文摘Although low salinity water injection(LSWI) has recovered residual oil after the conventional waterflood, highly viscous oil has remained in heavy oil reservoirs. Hot water injection is an economic and practical method to improve oil mobility for viscous oil reservoirs. It potentially controls temperature-dependent geochemical reactions underlying the LSWI mechanism and oil viscosity. Therefore, this study has modeled and evaluated a hybrid process of low salinity hot water injection(hot LSWI) to quantify synergistic effects in heavy oil reservoirs. In comparison to seawater injection(SWI) and LSWI, hot LSWI results in more cation ion-exchange(Ca^(2+) and Mg^(2+)) and more wettability modification. Hot LSWI also reduces oil viscosity. In core-scaled systems, it increases oil recovery by 21% and 6% over SWI and LSWI. In a pilotscaled reservoir, it produces additional oil by 6% and 3% over SWI and LSWI. Probabilistic forecasting with uncertainty assessment further evaluates the feasibility of hot LSWI to consider uncertainty in the pilot-scaled reservoir and observes enhanced heavy oil production. This study confirms the viability of hot LSWI due to synergistic effects including enhanced wettability modification and oil viscosity reduction effects.
