Alcohol-dispersed polymer complex as an effective and durable interface modifier for n-i-p perovskite solar cells

Abundant interfacial defects remain a significant challenge that hampers both the efficiency and stability of perovskite solar cells(PSCs).Herein,an alcohol-dispersed conducting polymer complex,denoted as PEDOT:F(Poly(3,4-ethylene dioxythiophene):Perfluorinated sulfonic acid ionomers),is introduced into the interface between perovskite and hole transporting layer in regular-structured PSCs.PEDOT:F serves as a multi-functional interface layer(filling grain boundaries and covering perovskite's grain-surface)to achieve a robust interaction with organic groups within perovskites,which could induce a structural transformation of PEDOT to increase its conductivity for the efficient hole-transport.Furthermore,the strong interaction between PEDOT and perovskites could promote an effective coupling of undercoordinated Pb~(2+)ions with the lone electron pairs near O&S atoms in PEDOT molecules,thereby enhancing defect passivation.Additionally,PEDOT:F with inherent hydrophobic properties prevents effectively moisture invasion into perovskites for the improved long-term stability of the PSCs.Consequently,the PEDOT:F-based PSCs achieved a champion efficiency of 24.81%,and maintained ca.92%of their initial efficiency after 7680 h of storage in a dry air environment,accompanied by the enhanced photothermal stability.

Designing interactive glazing through an engineering psychology approach:Six augmented reality scenarios that envision future car human-machine interface

Background With an increasing number of vehicles becoming autonomous,intelligent,and connected,paying attention to the future usage of car human-machine interface with these vehicles should become more relevant.Several studies have addressed car HMI but were less attentive to designing and implementing interactive glazing for every day(autonomous)driving contexts.Methods Reflecting on the literature,we describe an engineering psychology practice and the design of six novel future user scenarios,which envision the application of a specific set of augmented reality(AR)support user interactions.Additionally,we conduct evaluations on specific scenarios and experiential prototypes,which reveal that these AR scenarios aid the target user groups in experiencing a new type of interaction.The overall evaluation is positive with valuable assessment results and suggestions.Conclusions This study can interest applied psychology educators who aspire to teach how AR can be operationalized in a human-centered design process to students with minimal pre-existing expertise or minimal scientific knowledge in engineering psychology.

Synergistic Optimization of Buried Interface by Multifunctional Organic-Inorganic Complexes for Highly Efficient Planar Perovskite Solar Cells

For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is challenging to effectively optimize this interface as it is buried beneath the perovskite film.Herein,we have designed and synthesized a series of multifunctional organic-inorganic(OI)complexes as buried interfacial material to promote electron extraction,as well as the crystal growth of the perovskite.The OI complex with BF4−group not only eliminates oxygen vacancies on the SnO_(2) surface but also balances energy level alignment between SnO_(2) and perovskite,providing a favorable environment for charge carrier extraction.Moreover,OI complex with amine(−NH_(2))functional group can regulate the crystallization of the perovskite film via interaction with PbI2,resulting in highly crystallized perovskite film with large grains and low defect density.Consequently,with rational molecular design,the PSCs with optimal OI complex buried interface layer which contains both BF4−and−NH_(2) functional groups yield a champion device efficiency of 23.69%.More importantly,the resulting unencapsulated device performs excellent ambient stability,maintaining over 90%of its initial efficiency after 2000 h storage,and excellent light stability of 91.5%remaining PCE in the maximum power point tracking measurement(under continuous 100 mW cm−2 light illumination in N2 atmosphere)after 500 h.

Web GIS Human-Machine Interactive Interface Design with VISI

The fusion of VlSI （visual identity system Internet）, digital maps and Web GIS is presented. Web GIS interface interactive design with VISI needs to consider more new factors. VISI can provide the design principle, elements and contents for the Web GIS. The design of the Wuhan Bus Search System is fulfilled to confirm the validity and practicability of the fusion.

New Interface Complexity Metric on XML Schema

With increasing usage of a web services today, user required to consecrate reasoning energy to learning the complexities of the interface as opposed to the content. Interface complexity measures the degree of complexity encountered between the user and digital medium like website. This paper presents a New Interface Complexity (NIC) Metric, which partially based on existing schema metrics to weigh human insight of recent service interface;taking into account elements and attributes of XML documents implemented in?World Wide Web Consortium (W3C) XML Schema (WXS) to reduce the structure affecting the effort for comprehending schema documents. The NIC metric is able to draw conclusions about the perceived qualities: interoperability, extensibility and flexibility. It was discovered that there are significant correlations between NIC metric and existing measures. Automating, this practice would be beneficial to developers and designers, as it would help to provide useful feedback in software project design to check the quality of documents for easy maintenance and properly used of XML data for distributed applications.

A flexible multiscale algorithm based on an improved smoothed particle hydrodynamics method for complex viscoelastic flows

Viscoelastic flows play an important role in numerous engineering fields,and the multiscale algorithms for simulating viscoelastic flows have received significant attention in order to deepen our understanding of the nonlinear dynamic behaviors of viscoelastic fluids.However,traditional grid-based multiscale methods are confined to simple viscoelastic flows with short relaxation time,and there is a lack of uniform multiscale scheme available for coupling different solvers in the simulations of viscoelastic fluids.In this paper,a universal multiscale method coupling an improved smoothed particle hydrodynamics(SPH)and multiscale universal interface(MUI)library is presented for viscoelastic flows.The proposed multiscale method builds on an improved SPH method and leverages the MUI library to facilitate the exchange of information among different solvers in the overlapping domain.We test the capability and flexibility of the presented multiscale method to deal with complex viscoelastic flows by solving different multiscale problems of viscoelastic flows.In the first example,the simulation of a viscoelastic Poiseuille flow is carried out by two coupled improved SPH methods with different spatial resolutions.The effects of exchanging different physical quantities on the numerical results in both the upper and lower domains are also investigated as well as the absolute errors in the overlapping domain.In the second example,the complex Wannier flow with different Weissenberg numbers is further simulated by two improved SPH methods and coupling the improved SPH method and the dissipative particle dynamics(DPD)method.The numerical results show that the physical quantities for viscoelastic flows obtained by the presented multiscale method are in consistence with those obtained by a single solver in the overlapping domain.Moreover,transferring different physical quantities has an important effect on the numerical results.

A numerical study of coupled maps representing energy exchange processes between two environmental interfaces regarded as biophysical complex systems

The field of environmental sciences is abundant with various interfaces and is the right place for the application of new fundamental approaches leading towards a better understanding of environmental phenomena. Following the definition of environmental interface by Mihailovic and Bala? [1], such interface can be, for example, placed between: human or animal bodies and surrounding air, aquatic species and water and air around them, and natural or artificially built surfaces (vegetation, ice, snow, barren soil, water, urban communities) and the atmosphere, cells and surrounding environment, etc. Complex environmental interface systems are (i) open and hierarchically organised (ii) interactions between their constituent parts are nonlinear, and (iii) their interaction with the surrounding environment is noisy. These systems are therefore very sensitive to initial conditions, deterministic external perturbations and random fluctuations always present in nature. The study of noisy non-equilibrium processes is fundamental for modelling the dynamics of environmental interface regarded as biophysical complex system and for understanding the mechanisms of spatio-temporal pattern formation in contemporary environmental sciences. In this paper we will investigate an aspect of dynamics of energy flow based on the energy balance equation. The energy exchange between interacting environmen- tal interfaces regarded as biophysical complex systems can be represented by coupled maps. Therefore, we will numerically investigate coupled maps representing that exchange. In ana- lysis of behaviour of these maps we applied Lyapunov exponent and cross sample entropy.

COMPLEX VARIABLE-VARIATIONALMETHOD OF SOLUTION FOR BI-METALLAMINATES WITH INTERFACE CRACKSAND ITS APPLICATION IN GLUED JOINTS

In this paper, the eigen function expansions of displacements and stresses of bi-metal laminates with interface cracks are obtained. Furthermore, the stress intensity factors are determined by the variational method to satisfy the boundary conditions and there are only line integrals in the variational equations due to the previous satisfaction of all basic equations. The computations show that this method of solution has the advantages of rapid convergency and time-saving. The results obtained by this method for homogeneous material agree with the known ones very well.

Coupled maps serving the exchange processes on the environmental interfaces regarded as complex systems

We have defined the environmental interface through the exchange processes between media forming this interface. Considering the environmental interface as a complex system we elaborated the advanced mathematical tools for its modelling. We have suggested two coupled maps serving the exchange processes on the environmental interfaces spatially ranged from cellular to planetary level, i.e. 1) the map with diffusive coupling for energy exchange simulation and 2) the map with affinity, which is suitable for matter exchange processes at the cellular level. We have performed the dynamical analysis of the coupled maps using the Lyapunov exponent, cross sample as well as the permutation entropy in dependence on different map parameters. Finally, we discussed the map with affinity, which shows some features making it a promising toll in simulation of exchange processes on the environmental interface at the cellular level.

AN INTERFACE INCLUSION BETWEEN TWO DISSIMILAR PIEZOELECTRIC MATERIALS

The generalized two_dimensional problem of a dielectric rigid line inclusion, at the interface between two dissimilar piezoelectric media subjected to piecewise uniform loads at infinity, is studied by means of the Stroh theory. The problem was reduced to a Hilbert problem, and then closed_form expressions were obtained, respectively, for the complex potentials in piezoelectric media, the electric field inside the inclusion and the tip fields near the inclusion. It is shown that in the media, all field variables near the inclusion_tip show square root singularity and oscillatory singularity, the intensity of which is dependent on the material constants and the strains at infinity. In addition, it is found that the electric field inside the inclusion is singular and oscillatory too, when approaching the inclusion_tips from inside the inclusion.

Fully Fabric-Based Triboelectric Nanogenerators as Self-Powered Human-Machine Interactive Keyboards

Combination flexible and stretchable textiles with self-powered sensors bring a novel insight into wearable functional electronics and cyber security in the era of Internet of Things.This work presents a highly flexible and self-powered fully fabric-based triboelectric nanogenerator(F-TENG)with sandwiched structure for biomechanical energy harvesting and real-time biometric authentication.The prepared F-TENG can power a digital watch by low-frequency motion and respond to the pressure change by the fall of leaves.A self-powered wearable keyboard(SPWK)is also fabricated by integrating large-area F-TENG sensor arrays,which not only can trace and record electrophysiological signals,but also can identify individuals’typing characteristics by means of the Haar wavelet.Based on these merits,the SPWK has promising applications in the realm of wearable electronics,self-powered sensors,cyber security,and artificial intelligences.

Progress in molecular-simulation-based research on the effects of interface-induced fluid microstructures on flow resistance

In modern chemical engineering processes, solid interface involvement is the most important component of process intensification techniques, such as nanoporous membrane separation and heterogeneous catalysis. The fundamental mechanism underlying interfacial transport remains incompletely understood given the complexity of heterogeneous interfacial molecular interactions and the high nonideality of the fluid involved. Thus, understanding the effects of interface-induced fluid microstructures on flow resistance is the first step in further understanding interfacial transport. Molecular simulation has become an indispensable method for the investigation of fluid microstructure and flow resistance. Here, we reviewed the recent research progress of our group and the latest relevant works to elucidate the contribution of interface-induced fluid microstructures to flow resistance.We specifically focused on water, ionic aqueous solutions, and alcohol–water mixtures given the ubiquity of these fluid systems in modern chemical engineering processes. We discussed the effects of the interfaceinduced hydrogen bond networks of water molecules, the ionic hydration of ionic aqueous solutions, and the spatial distributions of alcohol and alcohol–water mixtures on flow resistance on the basis of the distinctive characteristics of different fluid systems.

Human Machine Interface with Wearable Electronics Using Biodegradable Triboelectric Films for Calligraphy Practice and Correction

Letter handwriting,especially stroke correction,is of great importance for recording languages and expressing and exchanging ideas for individual behavior and the public.In this study,a biodegradable and conductive carboxymethyl chitosan-silk fibroin(CSF)film is prepared to design wearable triboelectric nanogenerator(denoted as CSF-TENG),which outputs of V_(oc)≈165 V,I_(sc)≈1.4μA,and Q_(sc)≈72 mW cm^(−2).Further,in vitro biodegradation of CSF film is performed through trypsin and lysozyme.The results show that trypsin and lysozyme have stable and favorable biodegradation properties,removing 63.1%of CSF film after degrading for 11 days.Further,the CSF-TENG-based human-machine interface(HMI)is designed to promptly track writing steps and access the accuracy of letters,resulting in a straightforward communication media of human and machine.The CSF-TENG-based HMI can automatically recognize and correct three representative letters(F,H,and K),which is benefited by HMI system for data processing and analysis.The CSF-TENG-based HMI can make decisions for the next stroke,highlighting the stroke in advance by replacing it with red,which can be a candidate for calligraphy practice and correction.Finally,various demonstrations are done in real-time to achieve virtual and real-world controls including writing,vehicle movements,and healthcare.

The composition of acid/oil interface in acid oil emulsions

In well stimulation treatments using hydrochloric acid,undesirable water-in-oil emulsion and acid sludge may produce and then cause operational problems in oil field development.The processes intensify in the presence of Fe(Ⅲ),which are from the corroded surfaces of field equipment and/or iron-bearing minerals of the oil reservoir.In order to understand the reasons of the stability of acid emulsions,acid emulsions were prepared by mixing crude oil emulsion with 15% hydrochloric acid solutions with and without Fe(Ⅲ) and then separated into free and upper(water free) and intermediate(with water) layers.It is assumed that the oil phase of the free and upper layers contains the compounds which do not participate in the formation of acid emulsions,and the oil phase of the intermediate layers contains components involved in the formation of oil/acid interface.The composition of the oil phase of each layer of the emulsions was studied.It is found that the asphaltenes with a high content of sulfur,oxygen and metals as well the flocculated material of protonated non-polar oil components are concentrated at the oil/acid interface.In addition to the above,in the presence of Fe(Ⅲ) the Fe(Ⅲ)-based complexes with polar groups of asphaltenes are formed at the acid/oil interface,contributing to the formation of armor films which enhance the emulsion stability.

THE SiO_(2)H_(2)O INTERFACE AND EFFECTS ON QUARTZ ACTIVATION IN FLOTATION SYSTEM

The correlation between surface complexation at the SiO_(2)H_(2)O interface and quartz notation behavior was studied.Computer assisted calculations,using the programs SOLGASWATER,were adapted in order to con-struct distribution diagrams of surface speciation in the SiO_(2)-metal ion-H^(+) system in aqueous solutions.Equilib-rium constants for both surface and solution reactions were introduced in the composition matrix.Surface complexation,surface charge as well as notation results were compared and a good agreement was obtained.Furthermore,flotation mechanisms of quartz activation by common metal ions like Ca^(2+),Mg^(2+),Fe^(2+) are quantitatively discussed based on the surface reaction equilibrium constants.

Haptic Interface with Magnetic Field Sensitive Elastomer

Sense of touch is one of the important information from environment for human to live in daily life. Haptic interface is a hot topic in virtual reality but almost all of the devices focus on fingers and hands as targets. In this paper, we focus on the foot haptic device with magnetic flied sensitive elastomer （MSE）. We developed a haptic unit used as a magnetic field generator for MSE and contact point of foot haptic device. MSE samples mixed with 80 wt% carbonyl iron particles were prepared and evaluated with the developed magnet. Experimental results show that the mechanical property of the haptic unit can be modeled with the adjustable friction element. This property has a good advantage for the haptic unit.

AN INTERFACE INCLUSION BETWEEN TWO DISSIMILAR PIEZOELECTRIC MATERIALS

The generalized two-dimensional problem of a dielectric rigid line inclusion, at the interface between two dissimilar piezoelectric media subjected to piecewise uniform loads at infinity, is studied by means of the Stroh theory. The problem was reduced to a Hilbert problem, and then closed-form expressions were obtained, respectively, far the complex potentials in piezoelectric media, the electric field inside the inclusion and the tip fields near the inclusion. it is shown that in the media, all field variables near the inclusion-tip show square root singularity and oscillatory singularity, the intensity of which is dependent on the material constants and the strains at infinity. In addition, it is found that the electric field inside the inclusion is singular and oscillatory too, when approaching the inclusion-tips from inside the inclusion.

DYNAMIC PROPAGATION PROBLEM ON DUGDALE MODEL OF MODE Ⅲ INTERFACE CRACK

By the theory of complex functions, the dynamic propagation problem on Dugdale model of mode Ⅲ interface crack for nonlinear characters of materials was studied. The general expressions of analytical solutions are obtained by the methods of self-similar functions. The problems dealt with can be easily transformed into Riemann-Hilbert problems and their closed solutions are attained rather simply by this approach. After those solutions were utilized by superposition theorem, the solutions of arbitrarily complex problems could be obtained.

Asymmetrical dynamic propagation problems on mode III interface crack

By the application of the theory of complex functions, asymmetrical dynamic propagation problems on mode Ⅲ interface crack are studied. The universal representations of analytical solutions are obtained by the approaches of self-similar function. The problems researched can be facilely transformed into Riemann-Hilbert problems and analytical solution to an asymmetrical propagation crack under the condition of point loads and unit-step loads, respectively, is acquired. After those solutions were used by superposition theorem, the solutions of arbitrarily complex problems could be attained.

Dislocation stability in three-phase nanocomposites with imperfect interface

Interface imperfection can significantly affect the mechanical properties and failure mechanisms as well as the strength and toughness of nanocomposites. The elastic behavior of a screw dislocation in nanoscale coating with imperfect interface is studied in the three-phase composite cylinder model. The interface between inner nanoin- homogeneity and intermediate coating is assumed as perfectly bonded. The bonding between intermediate coating and outer matrix is considered to be imperfect with the assumption that interface imperfection is uniform, and a linear spring model is adopted to describe the weakness of imperfect interface. The explicit expression for image force acting on dislocation is obtained by means of a complex variable method. The analytic results indicate that inner interface effect and outer interface imperfection, simultaneously taken into account, would influence greatly image force, equilibrium position and stability of dislocation, and various critical parameters that would change dislocation stability. The weaker interface is a very strong trap for glide dislocation and, thus, a more effective barrier for slip transmission.