A nonqinear eddy viscosity model （NLEVM） and a scalable hybrid Reynolds averaged Navier-Stokes/large eddy simula- tion （RANS/LES） strategy are developed to improve the capability of the eddy viscosity model （EVM...A nonqinear eddy viscosity model （NLEVM） and a scalable hybrid Reynolds averaged Navier-Stokes/large eddy simula- tion （RANS/LES） strategy are developed to improve the capability of the eddy viscosity model （EVM） to simulate complex flows featuring separations and unsteady motions. To study the performance of the NLEVM, numerical simulations around S809 airfoil are carried out and the results show that the NLEVM performs much better when a large separation occurs. Calculated results of the flow around a triangular cylinder show that the NLEVM can improve the precision of the flow fields to some extents, but the error is still considerable, and the small turbulence structures can not be clearly captured as the EVM. Whereas the scalable hybrid RANS/LES model based on the NLEVM is fairy effective on resolving the turbulent structures and can give more satisfactory predictions of the flow fields.展开更多
The internal flow in an axial flow rotating machinery is affected by the rotating characteristics, often accompanied by a strong rotating separation under small flow conditions. At present, the very large eddy simulat...The internal flow in an axial flow rotating machinery is affected by the rotating characteristics, often accompanied by a strong rotating separation under small flow conditions. At present, the very large eddy simulation (VLES) model commonly used for the separation flow simulation still has certain limitations in simulating such rotating separation flow: (1) The Reynolds stress level is overestimated in the near-wall region. (2) The influence of the rotating effect cannot be effectively considered. The above two limitations affect the simulation accuracy of the VLES model for the rotating separation flow under small flow conditions in the axial flow rotating machinery. The objective of this paper is to provide a new hybrid unsteady Reynolds average Navier-Stokes/large eddy simulation (URANS/LES) model suitable for the simulation of the rotating separation flow in an axial flow rotating machinery. Compared with the original VLES method, the modifications are as follows: (1) A Reynolds stress damping function in the near-wall region is introduced to reduce the overestimation of the Reynolds stress caused by the near-wall Reynolds average Navier-Stokes (RANS) behavior of the VLES model. (2) A control function driven by the vortex is introduced to reflect the influence of the rotating effect. Three typical cases are used to verify the calculation accuracy of the modified model. It is shown that the modified model can capture more turbulent vortices based on the URANS grids, and the prediction accuracy of the rotating separation flow is effectively improved. Compared with the original VLES model, the modified model can accurately predict the head change in the hump region of the axial flow pump.展开更多
Oscillatory turbulent flow over a flat plate was studied by using large eddy simulation (LES) and Reynolds-average Navier-Stokes (RANS) methods. A dynamic subgrid-scale model was employed in LES and Saffman's tur...Oscillatory turbulent flow over a flat plate was studied by using large eddy simulation (LES) and Reynolds-average Navier-Stokes (RANS) methods. A dynamic subgrid-scale model was employed in LES and Saffman's turbulence model was used in RANS. The flow behaviors were discussed for the accelerating and decelerating phases during the oscillating cycle. The friction force on the wall and its phase shift from laminar to turbulent regime were also investigated for different Reynolds numbers. (Edited author abstract) 11 Refs.展开更多
Different turbulence closures were used to predict the flow interaction between the wakes created by compressor outlet guide vanes(OGVs) and a downstream annular pre-diffuser.Two statistical turbulence models were tes...Different turbulence closures were used to predict the flow interaction between the wakes created by compressor outlet guide vanes(OGVs) and a downstream annular pre-diffuser.Two statistical turbulence models were tested based on the classical Reynolds-averaged Navier-Stokes(RANS) approach.Both high-Re and low-Re(Launder-Sharma) versions of the k-ε model were applied to a selected test problem for OGV wake/diffuser flows.The test problem was specifically chosen because experimentally determined inlet conditions and both profile and performance data were available to validate predictions.A preliminary study was also reported of the more advanced large eddy simulation(LES) approach.The LES sub-grid-scale(SGS) model was the basic Smagorinsky eddy viscosity assumption,with a Van-Driest damping function for improved capture of near-wall viscous behaviour.Comparison between the two RANS models showed little difference in terms of velocity contours at OGV trailing edge and diffuser exit.In terms of overall diffuser performance(static pressure recovery and total pressure loss coefficients),the high-Re model was shown to agree well with experimental data.The preliminary LES study indicates the highly unsteady character of the OGV wake flow,but requires improved treatment of inlet conditions.展开更多
基金Project supported by the National Natural Science Foun-dation of China(Grant Nos.51179100,51279184)
文摘A nonqinear eddy viscosity model （NLEVM） and a scalable hybrid Reynolds averaged Navier-Stokes/large eddy simula- tion （RANS/LES） strategy are developed to improve the capability of the eddy viscosity model （EVM） to simulate complex flows featuring separations and unsteady motions. To study the performance of the NLEVM, numerical simulations around S809 airfoil are carried out and the results show that the NLEVM performs much better when a large separation occurs. Calculated results of the flow around a triangular cylinder show that the NLEVM can improve the precision of the flow fields to some extents, but the error is still considerable, and the small turbulence structures can not be clearly captured as the EVM. Whereas the scalable hybrid RANS/LES model based on the NLEVM is fairy effective on resolving the turbulent structures and can give more satisfactory predictions of the flow fields.
基金the National Natural Science Foundation of China(Grant Nos.51836010,51779258).
文摘The internal flow in an axial flow rotating machinery is affected by the rotating characteristics, often accompanied by a strong rotating separation under small flow conditions. At present, the very large eddy simulation (VLES) model commonly used for the separation flow simulation still has certain limitations in simulating such rotating separation flow: (1) The Reynolds stress level is overestimated in the near-wall region. (2) The influence of the rotating effect cannot be effectively considered. The above two limitations affect the simulation accuracy of the VLES model for the rotating separation flow under small flow conditions in the axial flow rotating machinery. The objective of this paper is to provide a new hybrid unsteady Reynolds average Navier-Stokes/large eddy simulation (URANS/LES) model suitable for the simulation of the rotating separation flow in an axial flow rotating machinery. Compared with the original VLES method, the modifications are as follows: (1) A Reynolds stress damping function in the near-wall region is introduced to reduce the overestimation of the Reynolds stress caused by the near-wall Reynolds average Navier-Stokes (RANS) behavior of the VLES model. (2) A control function driven by the vortex is introduced to reflect the influence of the rotating effect. Three typical cases are used to verify the calculation accuracy of the modified model. It is shown that the modified model can capture more turbulent vortices based on the URANS grids, and the prediction accuracy of the rotating separation flow is effectively improved. Compared with the original VLES model, the modified model can accurately predict the head change in the hump region of the axial flow pump.
基金The project supported by the Youngster Funding of Academia Sinica and by the National Natural Science Foundation of China
文摘Oscillatory turbulent flow over a flat plate was studied by using large eddy simulation (LES) and Reynolds-average Navier-Stokes (RANS) methods. A dynamic subgrid-scale model was employed in LES and Saffman's turbulence model was used in RANS. The flow behaviors were discussed for the accelerating and decelerating phases during the oscillating cycle. The friction force on the wall and its phase shift from laminar to turbulent regime were also investigated for different Reynolds numbers. (Edited author abstract) 11 Refs.
文摘Different turbulence closures were used to predict the flow interaction between the wakes created by compressor outlet guide vanes(OGVs) and a downstream annular pre-diffuser.Two statistical turbulence models were tested based on the classical Reynolds-averaged Navier-Stokes(RANS) approach.Both high-Re and low-Re(Launder-Sharma) versions of the k-ε model were applied to a selected test problem for OGV wake/diffuser flows.The test problem was specifically chosen because experimentally determined inlet conditions and both profile and performance data were available to validate predictions.A preliminary study was also reported of the more advanced large eddy simulation(LES) approach.The LES sub-grid-scale(SGS) model was the basic Smagorinsky eddy viscosity assumption,with a Van-Driest damping function for improved capture of near-wall viscous behaviour.Comparison between the two RANS models showed little difference in terms of velocity contours at OGV trailing edge and diffuser exit.In terms of overall diffuser performance(static pressure recovery and total pressure loss coefficients),the high-Re model was shown to agree well with experimental data.The preliminary LES study indicates the highly unsteady character of the OGV wake flow,but requires improved treatment of inlet conditions.
