A variational principle of hybrid FEM is proposed to solve the flow in a visco-elaslic pipe. As an example, the influence of an axisymmetrical stenosis on an artery vibrating flow with a single frequency is calculated.
This work explores the influence of double diffusion over thermally radiative flow of thin film hybrid nanofluid and irreversibility generation through a stretching channel.The nanoparticles of silver and alumina have...This work explores the influence of double diffusion over thermally radiative flow of thin film hybrid nanofluid and irreversibility generation through a stretching channel.The nanoparticles of silver and alumina have mixed in the Maxwell fluid(base fluid).Magnetic field influence has been employed to channel in normal direction.Equations that are going to administer the fluid flow have been converted to dimension-free notations by using appropriate variables.Homotopy analysis method is used for the solution of the resultant equations.In this investigation it has pointed out that motion of fluid has declined with growth in magnetic effects,thin film thickness,and unsteadiness factor.Temperature of fluid has grown up with upsurge in Brownian motion,radiation factor,and thermophoresis effects,while it has declined with greater values of thermal Maxwell factor and thickness factor of the thin film.Concentration distribution has grown up with higher values of thermophoresis effects and has declined for augmentation in Brownian motion.展开更多
In order to verify the effectiveness and superiority of the dynamic hybrid RANS/LES(DHRL)model,the flow around a cylinder with sinusoidal fluctuating velocity at the inlet was used as the test case.The latest computat...In order to verify the effectiveness and superiority of the dynamic hybrid RANS/LES(DHRL)model,the flow around a cylinder with sinusoidal fluctuating velocity at the inlet was used as the test case.The latest computational fluid dynamics(CFD)model can flexibly choose any existing large-eddy simulation(LES)method combined with RANS method to calculate the flow field.In addition,the DLES model and DDES model are selected as typical representatives of the turbulence model to compare the capture ability of the flow field mechanism.The internal flow field including the y+value,velocity distribution,turbulent kinetic energy and vortex structures is comprehensively analyzed.Finally,the results show that the new model has enough sensitivity to capture the information of the flow field and has more consistent velocity distribution with the experimental value,which shows its potential in practical engineering applications to some extent.展开更多
The purpose of this article is to review recent PIV Studies from the basic to hybrid analysis, focusing on explaining epoch-making development of PIV. The overwhelming advantage of PIV over other velocity measurement ...The purpose of this article is to review recent PIV Studies from the basic to hybrid analysis, focusing on explaining epoch-making development of PIV. The overwhelming advantage of PIV over other velocity measurement methods is that it enables instantaneous and simultaneous velocity measurement of whole flow fields. We roughly classify PIV development and/or progress into the following five categories; A) Basics of PIV and post-processing. B) Simultaneous measurement of velocity and temperature, and 3D-PIV. C) Application to multiphase turbulent flows. D) Application to fluid machinery. E) Hybridization of PIV and CFD. This paper introduces the epoch-making research results from papers published in international journals as milestones related to (A) to (E), and concludes with additional forecast of future development of PIV research.展开更多
Viscous CFD computations are performed to predict the aerodynamic coefficients and flowfield for a missile with grid fins by using hybrid grids. The computations arc made at Math numbvrs of 0.7 and 2.0. Full N-S equat...Viscous CFD computations are performed to predict the aerodynamic coefficients and flowfield for a missile with grid fins by using hybrid grids. The computations arc made at Math numbvrs of 0.7 and 2.0. Full N-S equations arc discretized into finite volume form and solved by an algorithm in LU-SGS. The comparisons between computation and experimental data are made, and the detailed flow structure near grid fin is shown and examined.展开更多
A mathematical model was established to simulate the weld pool development and dynamic process in stationary iaser-MlG hybrid welding. Surface tension and buoyancy were considered to calculate liquid metal flow patter...A mathematical model was established to simulate the weld pool development and dynamic process in stationary iaser-MlG hybrid welding. Surface tension and buoyancy were considered to calculate liquid metal flow patter, moreover, typical phenomena of MIG welding, such as filler droplets impinging weld pool, electromagnetic force in the weld pool, and typical phenomena of laser beam welding, such as recoil pressure, Inverse Bremsstrahlung absorption, Fresnel absorption were all considered in the model. The laser beam and arc couple effect were introduced into this model by the plasma width during hybrid welding. The role of recoil pressure in the weld formation was discussed. Transient weld pool shape and complicated liquid metal velocity distribution from two kinds weld pool to an unified weld pool were calculated. The simulated weld bead geometry with consideration recoil pressure was in good agreement with experimental measurement.展开更多
文摘A variational principle of hybrid FEM is proposed to solve the flow in a visco-elaslic pipe. As an example, the influence of an axisymmetrical stenosis on an artery vibrating flow with a single frequency is calculated.
文摘This work explores the influence of double diffusion over thermally radiative flow of thin film hybrid nanofluid and irreversibility generation through a stretching channel.The nanoparticles of silver and alumina have mixed in the Maxwell fluid(base fluid).Magnetic field influence has been employed to channel in normal direction.Equations that are going to administer the fluid flow have been converted to dimension-free notations by using appropriate variables.Homotopy analysis method is used for the solution of the resultant equations.In this investigation it has pointed out that motion of fluid has declined with growth in magnetic effects,thin film thickness,and unsteadiness factor.Temperature of fluid has grown up with upsurge in Brownian motion,radiation factor,and thermophoresis effects,while it has declined with greater values of thermal Maxwell factor and thickness factor of the thin film.Concentration distribution has grown up with higher values of thermophoresis effects and has declined for augmentation in Brownian motion.
基金Supported by the Open Fund of Key Laboratory of Road Construction Technology and Equipment of Chang’an University,Ministry of Education(310825171104)the Advanced Manufacturing Projects of Government and University Co-construction Program Funded by Jilin Province(SXGJSF2017-2)
文摘In order to verify the effectiveness and superiority of the dynamic hybrid RANS/LES(DHRL)model,the flow around a cylinder with sinusoidal fluctuating velocity at the inlet was used as the test case.The latest computational fluid dynamics(CFD)model can flexibly choose any existing large-eddy simulation(LES)method combined with RANS method to calculate the flow field.In addition,the DLES model and DDES model are selected as typical representatives of the turbulence model to compare the capture ability of the flow field mechanism.The internal flow field including the y+value,velocity distribution,turbulent kinetic energy and vortex structures is comprehensively analyzed.Finally,the results show that the new model has enough sensitivity to capture the information of the flow field and has more consistent velocity distribution with the experimental value,which shows its potential in practical engineering applications to some extent.
文摘The purpose of this article is to review recent PIV Studies from the basic to hybrid analysis, focusing on explaining epoch-making development of PIV. The overwhelming advantage of PIV over other velocity measurement methods is that it enables instantaneous and simultaneous velocity measurement of whole flow fields. We roughly classify PIV development and/or progress into the following five categories; A) Basics of PIV and post-processing. B) Simultaneous measurement of velocity and temperature, and 3D-PIV. C) Application to multiphase turbulent flows. D) Application to fluid machinery. E) Hybridization of PIV and CFD. This paper introduces the epoch-making research results from papers published in international journals as milestones related to (A) to (E), and concludes with additional forecast of future development of PIV research.
文摘Viscous CFD computations are performed to predict the aerodynamic coefficients and flowfield for a missile with grid fins by using hybrid grids. The computations arc made at Math numbvrs of 0.7 and 2.0. Full N-S equations arc discretized into finite volume form and solved by an algorithm in LU-SGS. The comparisons between computation and experimental data are made, and the detailed flow structure near grid fin is shown and examined.
文摘A mathematical model was established to simulate the weld pool development and dynamic process in stationary iaser-MlG hybrid welding. Surface tension and buoyancy were considered to calculate liquid metal flow patter, moreover, typical phenomena of MIG welding, such as filler droplets impinging weld pool, electromagnetic force in the weld pool, and typical phenomena of laser beam welding, such as recoil pressure, Inverse Bremsstrahlung absorption, Fresnel absorption were all considered in the model. The laser beam and arc couple effect were introduced into this model by the plasma width during hybrid welding. The role of recoil pressure in the weld formation was discussed. Transient weld pool shape and complicated liquid metal velocity distribution from two kinds weld pool to an unified weld pool were calculated. The simulated weld bead geometry with consideration recoil pressure was in good agreement with experimental measurement.
