Recent progress of hybrid cathode interface layer for organic solar cells

Organic solar cells(OSCs)have gained conspicuous progress during the past few decades due to the development of materials and upgrading of the device structure.The power conversion efficiency(PCE)of the single-junction device had surpassed 19%.The cathode interface layer(CIL),by optimizing the connection between the active layer and the cathode electrode,has become a momentous part to strengthen the performances of the OSCs.Simultaneously,CIL is also indispensable to illustrating the working mechanism of OSCs and enhancing the stability of the OSCs.In this essay,hybrid CILs in OSCs have been summarized.Firstly,the advancement and operating mechanism of OSCs,and the effects and relevant design rules of CIL are briefly concluded;secondly,the significant influence of CIL on enhancing the stability and PCE of OSCs is presented;thirdly,the characteristics of organic hybrid CIL and organic-inorganic hybrid CIL are introduced.Finally,the conclusion and outlook of CIL are summarized.

Resilient performance of self-centering hybrid rocking walls with curved interface under pseudo-static loading

Frame and rocking wall(FRW)structures have excellent resilient performance during earthquakes.However,the concrete at interfacial corners of rocking walls(RWs)is easily crushed due to local extreme compression during the rocking process.An innovative RW with a curved interface is proposed to prevent interfacial corners from producing local damage,enhancing its earthquake resilient performance(ERP).The precast wall panel with a curved interface is assembled into an integral self-centering hybrid rocking wall(SCRW)by two post-tensioned unbonded prestressed tendons.Moreover,two ordinary energy dissipation steel rebars and two shear reinforcements are arranged to increase the energy dissipation capacity and lateral resistance.Two SCRW specimens and one monolithic reinforced concrete(RC)shear wall(SW)were tested under pseudo-static loading to compare the ERPs of the proposed SCRW and the SW,focusing on studying the effect of the curved interface on the SCRW.The key resilient performance of rocking effects,failure modes,and hysteretic properties of the SCRW were explored.The results show that nonlinear deformations of the SCRW are concentrated along the interface between the SCRW and the foundation,avoiding damage within the SCRW.The restoring force provided by the prestressed tendons can effectively realize self-centering capacity with small residual deformation,and the resilient performance of the SCRW is better than that of monolithic SW.In addition,the curved interface of the SCRW makes the rocking center change and move inward,partially relieving the stress concentration and crush of concrete.The rocking range of the rocking center is about 41.4%of the width of the SCRW.

Designing interactive glazing through an engineering psychology approach:Six augmented reality scenarios that envision future car human-machine interface

Background With an increasing number of vehicles becoming autonomous,intelligent,and connected,paying attention to the future usage of car human-machine interface with these vehicles should become more relevant.Several studies have addressed car HMI but were less attentive to designing and implementing interactive glazing for every day(autonomous)driving contexts.Methods Reflecting on the literature,we describe an engineering psychology practice and the design of six novel future user scenarios,which envision the application of a specific set of augmented reality(AR)support user interactions.Additionally,we conduct evaluations on specific scenarios and experiential prototypes,which reveal that these AR scenarios aid the target user groups in experiencing a new type of interaction.The overall evaluation is positive with valuable assessment results and suggestions.Conclusions This study can interest applied psychology educators who aspire to teach how AR can be operationalized in a human-centered design process to students with minimal pre-existing expertise or minimal scientific knowledge in engineering psychology.

A Stable FE-FD Method for Anisotropic Parabolic PDEs with Moving Interfaces

In this paper,a new finite element and finite difference(FE-FD)method has been developed for anisotropic parabolic interface problems with a known moving interface using Cartesian meshes.In the spatial discretization,the standard P,FE discretization is applied so that the part of the coefficient matrix is symmetric positive definite,while near the interface,the maximum principle preserving immersed interface discretization is applied.In the time discretization,a modified Crank-Nicolson discretization is employed so that the hybrid FE-FD is stable and second order accurate.Correction terms are needed when the interface crosses grid lines.The moving interface is represented by the zero level set of a Lipschitz continuous function.Numerical experiments presented in this paper confirm second orderconvergence.

Web GIS Human-Machine Interactive Interface Design with VISI

The fusion of VlSI （visual identity system Internet）, digital maps and Web GIS is presented. Web GIS interface interactive design with VISI needs to consider more new factors. VISI can provide the design principle, elements and contents for the Web GIS. The design of the Wuhan Bus Search System is fulfilled to confirm the validity and practicability of the fusion.

Fast charge transport motivated by tunable Mo2C/Mo2N high-quality heterointerface for superior pseudocapacitive storage

The development of potential transition-metal carbide/nitride heterojunctions is hindered by overall understanding and precise modulation for heterointerface effects.Herein,we demonstrate that Mo_(2)C/Mo_(2)N heterojunction with the precisely regulated high-quality interface can achieve marvelous rate performance and energy output via enlarging the interface-effect range and maximizing "accelerated charge" amount The heterointerface mechanism improving properties is synergistically revealed from kinetics and thermodynamics perspectives.Kinetics analysis confirms that the self-built electric field affords a robust force to drive rapid interface electrons/ions migration.The small adsorption energy,high density of states and quite low diffusion barrier thermodynamically enhance the electrochemical reaction dynamics on heterointerface.Consequently,the almost optimal performance of ultrahigh capacitance retention(85.6% even at 10 A g^(-1)) and pronounced energy output(96.4 Wh kg^(-1))in hybridsupercapacitors than other Mo_(2)C/Mo_(2)N-based materials is presented.This work gives new insight into the energy storage mechanism of heterojunction and guides the design of advanced electrodes.

Regulatable Orthotropic 3D Hybrid Continuous Carbon Networks for Efficient Bi-Directional Thermal Conduction

Vertically oriented carbon structures constructed from low-dimen-sional carbon materials are ideal frameworks for high-performance thermal inter-face materials(TIMs).However,improving the interfacial heat-transfer efficiency of vertically oriented carbon structures is a challenging task.Herein,an orthotropic three-dimensional(3D)hybrid carbon network(VSCG)is fabricated by depositing vertically aligned carbon nanotubes(VACNTs)on the surface of a horizontally oriented graphene film(HOGF).The interfacial interaction between the VACNTs and HOGF is then optimized through an annealing strategy.After regulating the orientation structure of the VACNTs and filling the VSCG with polydimethylsi-loxane(PDMS),VSCG/PDMS composites with excellent 3D thermal conductive properties are obtained.The highest in-plane and through-plane thermal conduc-tivities of the composites are 113.61 and 24.37 W m^(-1)K^(-1),respectively.The high contact area of HOGF and good compressibility of VACNTs imbue the VSCG/PDMS composite with low thermal resistance.In addition,the interfacial heat-transfer efficiency of VSCG/PDMS composite in the TIM performance was improved by 71.3%compared to that of a state-of-the-art thermal pad.This new structural design can potentially realize high-performance TIMs that meet the need for high thermal conductivity and low contact thermal resistance in interfacial heat-transfer processes.

Gradient-augmented hybrid interface capturing method for incompressible two-phase flow

Motivated by inconveniences of present hybrid methods,a gradient-augmented hybrid interface capturing method（GAHM） is presented for incompressible two-phase flow.A front tracking method（FTM） is used as the skeleton of the GAHM for low mass loss and resources.Smooth eulerian level set values are calculated from the FTM interface,and are used for a local interface reconstruction.The reconstruction avoids marker particle redistribution and enables an automatic treatment of interfacial topology change.The cubic Hermit interpolation is employed in all steps of the GAHM to capture subgrid structures within a single spacial cell.The performance of the GAHM is carefully evaluated in a benchmark test.Results show significant improvements of mass loss,clear subgrid structures,highly accurate derivatives（normals and curvatures） and low cost.The GAHM is further coupled with an incompressible multiphase flow solver,Super CE/SE,for more complex and practical applications.The updated solver is evaluated through comparison with an early droplet research.

Bias-induced reconstruction of hybrid interface states in magnetic molecular junctions

Based on first-principles calculations,the bias-induced evolutions of hybrid interface states inπ-conjugated tricene and in insulating octane magnetic molecular junctions are investigated.Obvious bias-induced splitting and energy shift of the spin-resolved hybrid interface states are observed in the two junctions.The recombination of the shifted hybrid interface states from different interfaces makes the spin polarization around the Fermi energy strongly bias-dependent.The transport calculations demonstrate that in theπ-conjugated tricene junction,the bias-dependent hybrid interface states work efficiently for large current,current spin polarization,and distinct tunneling magnetoresistance.But in the insulating octane junction,the spin-dependent transport via the hybrid interface states is inhibited,which is only slightly disturbed by the bias.This work reveals the phenomenon of bias-induced reconstruction of hybrid interface states in molecular spinterface devices,and the underlying role of conjugated molecular orbitals in the transport ability of hybrid interface states.

Scalable Quantum Information Transfer between Individual Nitrogen-Vacancy Centers by a Hybrid Quantum Interface

We develop a design of a hybrid quantum interface for quantum information transfer （QIT）, adopting a nanome- chanical resonator as the intermedium, which is magnetically coupled with individual nitrogen-vacancy centers as the solid qubits, while eapacitively coupled with a coplanar waveguide resonator as the quantum data bus. We describe the Hamiltonian of the model, and analytically demonstrate the QIT for both the resonant interaction and large detuning cases. The hybrid quantum interface allows for QIT between arbitrarily selected individual nitrogen-vacancy centers, and has advantages of the sealability and controllability. Our methods open an alter- native perspective for implementing QIT, which is important during quantum storing or processing procedures in quantum computing.

Quantum state transfer via a hybrid solid–optomechanical interface

We propose a scheme to implement quantum state transfer between two distant quantum nodes via a hybrid solid–optomechanical interface. The quantum state is encoded on the native superconducting qubit, and transferred to the microwave photon, then the optical photon successively, which afterwards is transmitted to the remote node by cavity leaking,and finally the quantum state is transferred to the remote superconducting qubit. The high efficiency of the state transfer is achieved by controllable Gaussian pulses sequence and numerically demonstrated with theoretically feasible parameters.Our scheme has the potential to implement unified quantum computing–communication–computing, and high fidelity of the microwave–optics–microwave transfer process of the quantum state.

Skin-inspired interface modification strategy toward a structurefunction integrated hybrid smart fabric system with self-powered sensing property for versatile applications

Fabric-based composites with superior mechanical properties and excellent perceptive function are highly desirable.However,it remains a huge challenge to attain structure-function integration,especially for hybrid fabric composites.Herein,a skin-inspired interface modification strategy is proposed toward this target by constructing a hybrid smart fabric system consisting of two types of smart fabrics:carbon nanotube(CNT)/MXene-modified aramid fabrics and zinc oxide nanorod(ZnO NR)-modified carbon fabrics.Based on that,flexible piezoelectric pressure sensors with skin-like hierarchical perception interfaces are fabricated,which demonstrate superb sensitivity of 2.39 V·kPa^(-1)and are capable of various wearable monitoring tasks.Besides,the interface-modified hybrid fabric reinforced plastics can also be fabricated,which are proven to possess 13.6%higher tensile strength,10.1%elastic modulus.More impressively,their average energy absorption can be improved by 111.9%,accompanied with inherent damage alert capability.This offers a paradigm to fabricate structure-function integrated hybrid smart fabric composites for the smart clothing and intelligent aerial vehicles.

Fully Fabric-Based Triboelectric Nanogenerators as Self-Powered Human-Machine Interactive Keyboards

Combination flexible and stretchable textiles with self-powered sensors bring a novel insight into wearable functional electronics and cyber security in the era of Internet of Things.This work presents a highly flexible and self-powered fully fabric-based triboelectric nanogenerator(F-TENG)with sandwiched structure for biomechanical energy harvesting and real-time biometric authentication.The prepared F-TENG can power a digital watch by low-frequency motion and respond to the pressure change by the fall of leaves.A self-powered wearable keyboard(SPWK)is also fabricated by integrating large-area F-TENG sensor arrays,which not only can trace and record electrophysiological signals,but also can identify individuals’typing characteristics by means of the Haar wavelet.Based on these merits,the SPWK has promising applications in the realm of wearable electronics,self-powered sensors,cyber security,and artificial intelligences.

Human Machine Interface with Wearable Electronics Using Biodegradable Triboelectric Films for Calligraphy Practice and Correction

Letter handwriting,especially stroke correction,is of great importance for recording languages and expressing and exchanging ideas for individual behavior and the public.In this study,a biodegradable and conductive carboxymethyl chitosan-silk fibroin(CSF)film is prepared to design wearable triboelectric nanogenerator(denoted as CSF-TENG),which outputs of V_(oc)≈165 V,I_(sc)≈1.4μA,and Q_(sc)≈72 mW cm^(−2).Further,in vitro biodegradation of CSF film is performed through trypsin and lysozyme.The results show that trypsin and lysozyme have stable and favorable biodegradation properties,removing 63.1%of CSF film after degrading for 11 days.Further,the CSF-TENG-based human-machine interface(HMI)is designed to promptly track writing steps and access the accuracy of letters,resulting in a straightforward communication media of human and machine.The CSF-TENG-based HMI can automatically recognize and correct three representative letters(F,H,and K),which is benefited by HMI system for data processing and analysis.The CSF-TENG-based HMI can make decisions for the next stroke,highlighting the stroke in advance by replacing it with red,which can be a candidate for calligraphy practice and correction.Finally,various demonstrations are done in real-time to achieve virtual and real-world controls including writing,vehicle movements,and healthcare.

Haptic Interface with Magnetic Field Sensitive Elastomer

Sense of touch is one of the important information from environment for human to live in daily life. Haptic interface is a hot topic in virtual reality but almost all of the devices focus on fingers and hands as targets. In this paper, we focus on the foot haptic device with magnetic flied sensitive elastomer （MSE）. We developed a haptic unit used as a magnetic field generator for MSE and contact point of foot haptic device. MSE samples mixed with 80 wt% carbonyl iron particles were prepared and evaluated with the developed magnet. Experimental results show that the mechanical property of the haptic unit can be modeled with the adjustable friction element. This property has a good advantage for the haptic unit.

Design and Evaluation of a User Interface for an Autonomous Agricultural Sprayer

This paper describes the design and evaluation of a user interface for a remotely supervised autonomous agricultural sprayer. The interface was designed to help the remote supervisor to instruct the autonomous sprayer to commence operation, monitor the status of the sprayer and its operation in the field, and intervene when needed (i.e., to stop or shut down). Design principles and guidelines were carefully selected to help develop a human-centered automation interface. Evaluation of the interface using a combination of heuristic, cognitive walkthrough, and user testing techniques revealed several strengths of the design as well as areas that needed further improvement. Overall, this paper provides guidelines that will assist other researchers to develop an ergonomic user interface for a fully autonomous agricultural machine.

基于滑模变结构的混合微电网接口变换器双向下垂控制

由于混合微电网中的交直流子网具有不同的动态特性,当系统发生负荷突变时,会在双向接口变换器(bidirectional interface converter, BIC)两侧子网间产生功率波动,使交流母线频率和直流母线电压动态响应变差,为此提出了基于分数阶滑模控制器(fractional order sliding mode controller, FOSMC)的双向下垂控制策略。将具有鲁棒性强、响应速度快和抗干扰能力强的滑模变结构控制引入到BIC的控制中,得到改进型的分数阶滑模控制器,以改善系统的暂态响应过程。通过Matlab/Simulink平台搭建了仿真模型,在多种工况下验证了该控制策略的有效性。与传统双向下垂控制相比,该控制算法可以在保证系统原有稳态特性的同时,加快整个系统的响应速度,抑制暂态过程中BIC传输功率的瞬间波动,减小功率波动对交直流子网母线的反作用,提高整个系统的动态性能和抗扰动性能。

VAE乳胶粉/碳纤维复合改性混凝土的力学性能

为探究醋酸乙烯酯-乙烯共聚物(VAE)乳胶粉和碳纤维对混凝土力学性能的混杂改性效果及机理,制备了1种VAE乳胶粉改性混凝土(VAEMC)、3种碳纤维改性混凝土(CFMC)和3种VAE乳胶粉/碳纤维复合改性混凝土(VAE/CFMC),测试了改性混凝土的电阻率和力学性能,并进行了扫描电镜试验和压汞试验.结果表明:VAE乳胶粉可以促进碳纤维的分散,VAE/CFMC的电阻率小于CFMC;与CFMC相比,VAE/CFMC的力学性能更佳;VAE乳胶粉与碳纤维具有“正混杂效应”,复掺VAE乳胶粉与碳纤维时,混凝土的力学性能呈现出“1+1>2”的复合增强效果;VAE乳胶粉可以优化CFMC的孔隙结构,细化其孔径,增强碳纤维/混凝土基体界面的物理结合,使碳纤维的破坏形式由拉滑破坏转变为拉断破坏.

铝/铜蓝-红激光复合焊接头组织及性能

为实现动力电池的高效可靠焊接,文中采用蓝-红复合激光进行了1050 Al/T2 Cu搭接焊,分析了激光功率对接头显微组织、相分布、力学性能及导电性能的影响规律.结果表明,铝/铜搭接接头焊缝表面平整,截面呈现T形,PB(蓝光功率)保持300 W,PR(红光功率)在700~1400 W区间内增加,铜侧熔深由60μm增大到1000μm,在PR=800 W时实现良好的冶金结合.焊缝组织由Al固溶体、Al-Cu共晶相和Al_(2)Cu金属间化合物组成,随激光功率增大,焊缝局部出现Al_(4)Cu_(9)相,边缘出现AlCu,Al_(4)Cu_(9)和AlCu_(3)相.在PR=800 W下抗剪强度达到最高108.6 MPa,接触电阻达到最小94μΩ,裂纹由两极交界处Al_(2)Cu区域萌生,沿焊缝边缘由外层Al_(2)Cu区扩展到底部Al固溶体和Al-Cu共晶区交界处,断裂形式为解理断裂.

基于分数阶滑模的混合微电网接口变换器电压稳定控制

针对并网型交直流混合微电网直流侧母线电压波动问题,提出一种基于分数阶滑模控制的交直流混合微电网互联接口变换器电压稳定控制策略。首先,基于交直流混合微电网互联接口变换器的数学模型,设计控制参数并推导出可控标准型状态空间表达式。然后,针对控制目标选取状态变量并设计电压变结构和电流分数阶滑模控制器。最后,通过MATLAB/Simulink仿真和RT-LAB半实物平台验证了该控制策略与传统PI控制、传统单环滑模控制相比具有更好的追踪性能及鲁棒性。