Modeling and Analysis of Novel Integrated Radial Hybrid Magnetic Bearing for Magnetic Bearing Reaction Wheel

Conventional ball bearing reaction wheel used to control the attitude of spacecraft can＇t absorb the centrifugal force caused by imbalance of the wheel rotor,and there will be a torque spike at zero speed,which seriously influences the accuracy and stability of spacecraft attitude control.Compared with traditional ball-bearing wheel,noncontact and no lubrication are the remarkable features of the magnetic bearing reaction wheel,and which can solve the high precision problems of wheel.In general,two radial magnetic bearings are needed in magnetic bearing wheel,and the design results in a relatively large axial dimension and smaller momentum-to-mass ratios.In this paper,a new type of magnetic bearing reaction wheel（MBRW） is introduced for satellite attitude control,and a novel integrated radial hybrid magnetic bearing（RHMB） with permanent magnet bias is designed to reduce the mass and minimize the size of the MBRW,etc.The equivalent magnetic circuit model for the RHMB is presented and a solution is found.The stiffness model is also presented,including current stiffness,position negative stiffness,as well as tilting current stiffness,tilting angular position negative stiffness,force and moment equilibrium equations.The design parameters of the RHMB are given according to the requirement of the MBRW with angular momentum of 30 N ？ m ？ s when the rotation speed of rotor reaches to 5 kr/min.The nonlinearity of the RHMB is shown by using the characteristic curves of force-control current-position,current stiffness,position stiffness,moment-control current-angular displacement,tilting current stiffness and tilting angular position stiffness considering all the rotor position within the clearance space and the control current.The proposed research ensures the performance of the radial magnetic bearing with permanent magnet bias,and provides theory basis for design of the magnetic bearing wheel.

Torque Ripple Reduction of Synchronous Reluctance Machine by Using Asymmetrical Barriers and Hybrid Magnetic Core

As there is no need of permanent magnet(PM)material and only silicon steel sheet required on the rotor,synchronous reluctance machine(SynRM)can be used for many applications and draws a great research interest.For the SynRM,the torque ripple is a big issue and a great of work could been done on reducing it.In this paper,asymmetrical magnetic flux barriers in the SynRM rotor were studied comprehensively,including angle and width of each layer and each side of the magnetic barrier.The SynRMb with asymmetrical and parallel magnetic flux barrier was found as the best way to design SynRM based on the multi-objective design optimization method.Moreover,each parameter was studied to show the design rule of the asymmetrical magnetic flux barrier.As the average torque will be reduced with the asymmetrical barrier is used,the grain-oriented silicon steel is used on stator teeth of the SynRMb(SynRMbG)was proposed and studied.The analysis results show that the proposed new method can make the SynRM have better performance.

Magnetic Properties and Intergranular Action in Bonded Hybrid Magnets

Magnetic properties and intergranular action in bonded hybrid magnets,based on NdFeB and strontium ferrite powders were investigated.The long-range magnetostatic interaction and short-range exchange coupling interaction existed simultaneously in bonded hybrid magnets,and neither of them could be neglected.Some magnetic property parameters of hybrid magnets could be approximately obtained by adding the hysteresis loops of two magnets pro rata.

Earth-observation satellite attitude control using passive and active hybrid magnetically suspended flywheels

The control strategy is presented using passive and active hybrid magnetically suspended flywheels（P＆A MSFWs）,which can help meet the requirements of high precision and high stability for earth-observation satellites.Compared with the conventional flywheel,P＆A MSFW has more rotation degrees of freedom（DOFs）since the rotor is suspended by magnetic bearings,and thus requires more efficient controllers.A modified sliding mode control law（SMC）to our novel nonlinear and coupled system is presented,which is interrupted by inertia matrix uncertainties and external disturbances.SMC law via Lyapunov method is improved,and a fuzzy control scheme is used to attenuate the chatting and control attitude accuracy and maintain the robustness of SMC.Simulation results are provided to illustrate the efficiency of our model by using our control law.

Transient multi-physics behavior of an insert high temperature superconducting no-insulation coil in hybrid superconducting magnets with inductive coupling

A transient multi-physics model incorporated with an electromagneto-thermomechanical coupling is developed to capture the multi-field behavior of a single-pancake(SP)insert no-insulation(NI)coil in a hybrid magnet during the charging and discharging processes.The coupled problem is resolved by means of the finite element method(FEM)for the magneto-thermo-elastic behaviors and the Runge-Kutta method for the transient responses of the electrical circuits of the hybrid superconducting magnet system.The results reveal that the transient multi-physics responses of the insert NI coil primarily depend on the charging/discharging procedure of the hybrid magnet.Moreover,a reverse azimuthal current and a compressive hoop stress are induced in the insert NI coil during the charging process,while a forward azimuthal current and a tensile hoop stress are observed during the discharging process.The induced voltages in the insert NI coil can drive the currents flowing across the radial turns where the contact resistance exists.Therefore,it brings forth significant Joule heat,causing a temperature rise and a uniform distribution of this heat in the coil turns.Accordingly,a thermally/mechanically unstable or quenching event may be encountered when a high operating current is flowing in the insert NI coil.It is numerically predicted that a quick charging will induce a compressive hoop stress which may bring a risk of buckling instability in the coil,while a discharging will not.The simulations provide an insight of hybrid superconducting magnets under transient start-up or shutdown phases which are inevitably encountered in practical applications.

Contribution to the Full 3D Finite Element Modelling of a Hybrid Stepping Motor with and without Current in the Coils

The paper presents our contribution to the full 3D finite element modelling of a hybrid stepping motor using COMSOL Multiphysics software. This type of four-phase motor has a permanent magnet interposed between the two identical and coaxial half stators. The calculation of the field with or without current in the windings (respectively with or without permanent magnet) is done using a mixed formulation with strong coupling. In addition, the local high saturation of the ferromagnetic material and the radial and axial components of the magnetic flux are taken into account. The results obtained make it possible to clearly observe, as a function of the intensity of the bus current or the remanent induction, the saturation zones, the lines, the orientations and the magnetic flux densities. 3D finite element modelling provide more accurate numerical data on the magnetic field through multiphysics analysis. This analysis considers the actual operating conditions and leads to the design of an optimized machine structure, with or without current in the windings and/or permanent magnet.

Model-free adaptive control for three-degree-of-freedom hybrid magnetic bearings

Mathematical models are disappointing due to uneven distribution of the air gap magnetic field and significant un- modeled dynamics in magnetic bearing systems. The effectiveness of control deteriorates based on an inaccurate mathematical model, creating slow response speed and high jitter. To solve these problems, a model-free adaptive control （MFAC） scheme is proposed for a three-degree-of-freedom hybrid magnetic bearing （3-DoF HMB） control system. The scheme for 3-DoF HMB depends only on the control current and the objective balanced position, and it does not involve any model information. The design process of a parameter estimation algorithm is model-free, based directly on pseudo-partial-derivative （PPD） derived online from the input and output data information. The rotor start-of-suspension position of the HMB is regulated by auxiliary bearings with different inner diameters, and two kinds of operation situations （linear and nonlinear areas） are present to analyze the validity of MFAC in detail. Both simulations and experiments demonstrate that the proposed MFAC scheme handles the 3-DoF HMB control system with start-of-suspension response speed, smaller steady state error, and higher stability.

Suspension Power Optimization of Unbalanced Structure Permanent-electro Hybrid Magnet Using Genetic Algorithm

The permanent magnet electromagnetic hybridmagnet (PEHM) has the advantages of low energy consumptionand a large suspension air gap. In this study, an unbalancedPEHM structure is proposed, which combines the advantages ofthe previous hybrid magnet structure. First, by establishing themagnetic circuit model of the new hybrid magnet structure, theinfluence of magnetic field distribution on the working magneticcircuit of the magnet is analyzed, and the method of magneticforce correction calculation of the new structure magnet isgiven. Then, the validity of the magnetic calculation method isverified by the 3D finite element method (FEM). Furthermore, theaverage suspension power force ratio is used as the optimizationgoal, and the system parameters of the hybrid magnet under aworking air gap of 6–10 mm and a load condition of 15000–20000 N are optimized by a genetic algorithm. Compared withthe previous hybrid magnet, the optimized hybrid magnet systemcan maintain lower power consumption under comprehensiveworking conditions.

Mechanism of hybrid-magnetic-circuit multi-couple motor

Discusses the interval between laminations in a permanent magnet inductor motor which makes the air gap magnetic field produced by the permanent magnet very uneven in the axial direction, and limits the performance of a motor. Proposes a hybrid magnetic circuit multi couple motor to compensate for the uneven air gap magnetic field, thereby improving the performance of a motor.

Optimization Design and Analysis of a Hybrid Permanent Magnet Flux-Switching Motor with Compound Rotor Configuration

This paper proposes a type of flux-switching permanent magnet(FSPM)motor,where the design concept of the hybrid permanent magnets(HPM)and the compound rotor are incorporated into the motor design.In such design,the proposed motor can not only realize the significant reduction of NdFeB volume,but also artfully convert external magnetic flux leakage into the air-gap field to achieve competitive torque density and desirable PM usage efficiency.For extensive investigation,two topologies of the HPM are designed and analyzed for the proposed motor,which consist of the parallel-magnetic-hybrid(PMH)mode and serial-magnetic-hybrid(SMH)mode.To fully exploit the potential advantages of the proposed motor,a multi-objective optimization design is conducted,where the response surface method(RSM)and sequential non-linear programming(SNP)method are purposely utilized.After optimization,the electromagnetic performances of the motor with PMH mode and SMH mode are evaluated and compared by using finite element method(FEM),which include the back-EMF,cogging torque,output torque,and so on.Furthermore,the partial demagnetization of the ferrite PM is also investigated in the paper.Finally,the theoretical analysis and simulation study verify the effectiveness of the proposed motor and corresponding optimization design.

High-Performance Sodium Bose-Einstein Condensate Apparatus with a Hybrid Trap and Long-Distance Magnetic Transfer

We report on the production of large sodium Bose^Einstein condensates in a hybrid of magnetic quadrupole and optical dipole trap. With an optimized spin-flip Zeeman slower, 2 ~ 1010 sodium atoms are captured in the magneto-optical trap （MOT）. A long distance magnetic transfer setup moves the cold atom over 46cm from the MOT chamber to the UHV science chamber, which provides great optical access and long conservative trap lifetime. After evaporative cooling in the hybrid trap, we produce nearly pure condensates of 1 ~ 107 atoms with lifetime of 80 s in the optical dipole trap.

Global Hybrid Simulation of Magnetic Reconnection in the Magnetosheath

A three-dimensional(3-D)global hybrid simulation is carried out for the generation and structure of magnetic reconnection in the magnetosheath due to interaction of an interplanetary Tangential Discontinuity(TD)with the bow shock and magnetosphere.Runs are performed for solar wind TDs possessing diFFerent initial half-widths.As the TD propagates through the bow shock toward the magnetopause,it is greatly narrowed by a two-step compression processes,a "shock compression" followed by a subsequent "convective compression".In cases with a relatively thin solar wind TD,3-D patchy reconnection is initiated in the transmitted TD,forming magnetosheath flux ropes.Multiple components of ion particles are present in the velocity distribution in the magnetosheath merging,accompanied by ion heating.For cases with a relatively wide initial TD,a dominant single X-line appears in the subsolar magnetosheath after the transmitted TD is narrowed.A shock analysis is performed for the detailed structure of magnetic reconnection in the magnetosheath.Rotational Discontinuity(RD)/TimeDependent Intermediate Shock(TDIS)are found to dominate the reconnection layer,which and some weak slow shocks are responsible for the ion heating and acceleration.

Identification of Magnetic Bearing Stiffness and Damping Based on Hybrid Genetic Algorithm

Identifying the stiffness and damping of active magnetic bearings(AMBs)is necessary since those parameters can affect the stability and performance of the high-speed rotor AMBs system.A new identification method is proposed to identify the stiffness and damping coefficients of a rotor AMB system.This method combines the global optimization capability of the genetic algorithm(GA)and the local search ability of Nelder-Mead simplex method.The supporting parameters are obtained using the hybrid GA based on the experimental unbalance response calculated through the transfer matrix method.To verify the identified results,the experimental stiffness and damping coefficients are employed to simulate the unbalance responses for the rotor AMBs system using the finite element method.The close agreement between the simulation and experimental data indicates that the proposed identified algorithm can effectively identify the AMBs supporting parameters.

Upper Hybrid Resonance of Microwaves with a Large Magnetized Plasma Sheet

A large magnetized plasma sheet with size of 60 cm×60 cm×2 cm was generated by a linear hollow cathode discharge under the confinement of a uniform magnetic field generated by a Helmholtz Coil. The microwave transmission characteristic of the plasma sheet was measured for different incident frequencies, in cases with the electric field polarization of the incident microwave either perpendicular or parallel to the magnetic field. In this measurement, parameters of the plasma sheet were changed by varying the discharge current and magnetic field intensity. In the experiment, upper hybrid resonance phenomena were observed when the electric field polarization of the incident wave was perpendicular to the magnetic field. These resonance phenomena cannot be found in the case of parallel polarization incidence. This result is consistent with theoretical consideration. According to the resonance condition, the electron density values at the resonance points are calculated under various experimental conditions. This kind of resonance phenomena can be used to develop a specific method to diagnose the electron density of this magnetized plasma sheet apparatus. Moreover, it is pointed out that the operating parameters of the large plasma sheet in practical applications should be selected to keep away from the upper hybrid resonance point to prevent signals from polarization distortion.

Development and Analysis of the Magnetic Circuit on Double-Radial Permanent Magnet and Salient-Pole Electromagnetic Hybrid Excitation Generator for Vehicles

With the improvement of vehicles electrical equipment, the existing silicon rectification generator and permanent magnet generator cannot meet the requirement of the electric power consumption of the modern vehicles electrical equipment. It is di cult to adjust the air gap magnetic field of the permanent magnet generator. Consequently, the output voltage is not stable. The silicon rectifying generator has the problems of low e ciency and high failure rate.In order to solve these problems, a new type of hybrid excitation generator is developed in this paper. The developed hybrid excitation generator has a double-radial permanent magnet, a salient-pole electromagnetic combined rotor,and a fractional slot winding stator, where each rotor pole corresponds to 4.5 stator teeth. The equivalent magnetic circuit diagram of permanent magnet rotor and magnetic rotor is established. Magnetic field finite element analysis(FEA) software is used to conduct the modeling and simulation analysis on double-radial permanent magnet magnetic field, salient-pole electro-magnetic magnetic field and hybrid magnetic field. The magnetic flux density mold value diagram and vector diagram are obtained. The diagrams are used to verify the feasibility of this design. The designed electromagnetic coupling regulator controller can ensure the stable voltage export by changing the magnitude and direction of the excitation current to adjust the size of the air gap magnetic field. Therefore, the problem of output voltage instability in the wide speed range and wide load range of the hybrid excitation generator is solved.

Development of Novel Magnetic Responsive Intelligent Fluid, Hybrid Fluid (HF), for Production of Soft and Tactile Rubber

For the purpose of the replacement of Magnetic Fluid (MF) which is effective in the production of an artificial soft and tactile skin for the robot, etc. by utilizing a rubber solidification method with electrolytic polymerization, we proposed a novel magnetic responsive intelligent fluid, Hybrid Fluid (HF). HF is structured with water, kerosene, silicon oil having Polydimethylsiloxane (PDMS) and Polyvinyl Alcohol (PVA) as well as magnetic particles and surfactant. The state of HF changes as jelly or fluid by their rates of the constituents and motion style. In the present paper, we presented the characteristics of HF: the viscosity and the magnetization are respectively equivalent to those of other magnetic responsive fluids, MF and their solvents. For the structure, HF is soluble simultaneously with both diene and non-diene rubbers. The diene rubber such as Natural Rubber (NR) or Chloroprene (CR) has a role in the feasibility of electrolytic polymerization and the non-diene rubber such as silicon oil rubber (Q) has a role in defense against deterioration. Therefore, the electrolytically polymerized HF rubber by mixing NR, CR as well as Q is effective for the artificial soft and tactile skin. It is responsive to pressure and has optimal property on piezoelectricity in the case of the mixture of Ni particles as filler. HF is effective in the production of the artificial soft and tactile skin made of rubber.

混合转子永磁电机双风道冷却系统设计

混合转子永磁电机具有高功率密度的优势,但也导致电机散热空间和散热能力不足等问题。为此,根据其特有的转子结构提出一种双风道冷却系统,并采用计算流体力学(Computational fluid dynamics,CFD)的方法对电机温度场进行验证。首先,根据电机损耗和尺寸设计一个适合双风道的轴流风扇。其次,对不同进、出风口的结构参数进行仿真,对比和分析仿真结果,选出冷却性能较好的参数组合。最后对单风道和该参数组合下的双风道进行数值模拟,仿真结果表明,使用双风道冷却结构后电机散热能力显著提升。

基于磁热耦合法的非对称混合磁极永磁电机热分析

针对传统内置永磁电机损耗高、发热量大的问题,提出非对称混合磁极永磁电机拓扑结构.介绍非对称混合磁极永磁电机的拓扑结构,对比分析两者的电磁特性与损耗分布特性.针对非对称混合磁极永磁电机分布式绕组的结构特点,对绕组进行等效处理,确定等效导热系数,建立集中参数热网络模型.建立单向磁热耦合模型,计算电机各部件的温度分布,验证了热网络模型的正确性.考虑到温度对永磁材料的影响,建立双向磁热耦合模型,对比分析不同电流密度对电机温升的影响规律.试制一台样机并搭建温升试验平台进行温升试验,验证了新型拓扑结构的有效性与合理性以及磁热双向耦合法计算结果的准确性.

多变运行工况下混合励磁轴向磁场永磁电机自适应模型预测电流控制

针对多变运行工况下混合励磁轴向磁场永磁(hybrid excited axial field permanent magnet,HE-AFPM)电机中电励磁磁场与电枢磁场之间矢量耦合、端部漏磁等导致的电机参数非线性变化问题,该文提出一种混合励磁轴向磁场永磁电机自适应模型预测电流控制方法。详细分析HE-AFPM电机拓扑结构及参数变化特性;引入多矢量模型预测电流控制,理论推导分析HE-AFPM电机参数对控制系统的敏感性。在此基础上,将多矢量预测模型作为自适应控制的可调模型,降低了控制算法的复杂度和控制系统的计算负荷,提高了控制系统响应速度;依据波波夫(Popov)超稳定理论,引入3个不等式稳定判据设计各参数的自适应律,可实现多变运行工况下的HE-AFPM电机磁链、自感、互感等参数的有效识别,提高了控制模型的准确性和电流跟踪性能。最后,通过实验验证所提出的自适应模型预测电流控制的有效性。

磁性元件等离子清洗烧蚀现象分析及解决措施

在混合集成电路装配过程中,采用等离子清洗是提升工艺可靠性的一种有效方法。混合集成电路采用多种有源器件和无源器件,对于其中的磁性元件,等离子体遇到磁场被束缚,造成离子聚集,当射频能量偏大或未采取有效保护措施时,易出现发光放电现象,产生烧蚀。从一个等离子清洗失效案例入手,针对清洗过程中磁性元件烧蚀现象进行了详细分析,并提出了相应的改进措施。