Frame and rocking wall(FRW)structures have excellent resilient performance during earthquakes.However,the concrete at interfacial corners of rocking walls(RWs)is easily crushed due to local extreme compression during ...Frame and rocking wall(FRW)structures have excellent resilient performance during earthquakes.However,the concrete at interfacial corners of rocking walls(RWs)is easily crushed due to local extreme compression during the rocking process.An innovative RW with a curved interface is proposed to prevent interfacial corners from producing local damage,enhancing its earthquake resilient performance(ERP).The precast wall panel with a curved interface is assembled into an integral self-centering hybrid rocking wall(SCRW)by two post-tensioned unbonded prestressed tendons.Moreover,two ordinary energy dissipation steel rebars and two shear reinforcements are arranged to increase the energy dissipation capacity and lateral resistance.Two SCRW specimens and one monolithic reinforced concrete(RC)shear wall(SW)were tested under pseudo-static loading to compare the ERPs of the proposed SCRW and the SW,focusing on studying the effect of the curved interface on the SCRW.The key resilient performance of rocking effects,failure modes,and hysteretic properties of the SCRW were explored.The results show that nonlinear deformations of the SCRW are concentrated along the interface between the SCRW and the foundation,avoiding damage within the SCRW.The restoring force provided by the prestressed tendons can effectively realize self-centering capacity with small residual deformation,and the resilient performance of the SCRW is better than that of monolithic SW.In addition,the curved interface of the SCRW makes the rocking center change and move inward,partially relieving the stress concentration and crush of concrete.The rocking range of the rocking center is about 41.4%of the width of the SCRW.展开更多
Counter gravity casting equipments(CGCE) were widely used to produce large thin-walled A357 aluminum alloy components. To improve the pressure control precision of CGCE to get high quality castings, a pressure control...Counter gravity casting equipments(CGCE) were widely used to produce large thin-walled A357 aluminum alloy components. To improve the pressure control precision of CGCE to get high quality castings, a pressure control system based on fuzzy-PID hybrid control technology and the digital assembled valve was developed. The actual pressure tracking experiment results show that the special system by applying PID controller and fuzzy controller to varied phases, is not only able to inherit the small error and good static stability of classical PID control, but also has fuzzy control’s advantage of fully adapting itself to the object. The pressure control error is less than 0.3 kPa. By using this pressure control system, large complex thin-walled A357 aluminum alloy castings with high quality was successfully produced.展开更多
The full operator method (FOM) has been proposed to overcome some of the shortcomings of the commonly used operator splitting method (OSM). In particular, the FOM is improved by increasing the accuracy of both the...The full operator method (FOM) has been proposed to overcome some of the shortcomings of the commonly used operator splitting method (OSM). In particular, the FOM is improved by increasing the accuracy of both the predictor and corrector using the estimated tangent stiffness of the tested structure. The numerical characteristics of the FOM, including stability and accuracy, are investigated in this study. It is shown that FOM is conditionally stable. The stability and accuracy characteristics are dependent on the accuracy of the estimated tangent stiffness and the parameters associated with the acceleration variation in the time-stepping integration method. Mass-spring systems with different types of nonlinearity, including hardening, stiffening, and softening behavior, are used to evaluate the performance of the FOM. It is found that the FOM can capture these types of nonlinearity with satisfactory accuracy. Using a prototype 12-story composite coupled wall system, the influences of the strong nonlinearity of the system as well as the displacement control errors from hydraulic actuators on the performance of the FOM are explored. The results show that the FOM is capable of generating reasonably accurate results despite the presence of strong structural nonlinearity and displacement control errors.展开更多
基金National Key Research and Development Program of China under Grant No.2018YFC0705602。
文摘Frame and rocking wall(FRW)structures have excellent resilient performance during earthquakes.However,the concrete at interfacial corners of rocking walls(RWs)is easily crushed due to local extreme compression during the rocking process.An innovative RW with a curved interface is proposed to prevent interfacial corners from producing local damage,enhancing its earthquake resilient performance(ERP).The precast wall panel with a curved interface is assembled into an integral self-centering hybrid rocking wall(SCRW)by two post-tensioned unbonded prestressed tendons.Moreover,two ordinary energy dissipation steel rebars and two shear reinforcements are arranged to increase the energy dissipation capacity and lateral resistance.Two SCRW specimens and one monolithic reinforced concrete(RC)shear wall(SW)were tested under pseudo-static loading to compare the ERPs of the proposed SCRW and the SW,focusing on studying the effect of the curved interface on the SCRW.The key resilient performance of rocking effects,failure modes,and hysteretic properties of the SCRW were explored.The results show that nonlinear deformations of the SCRW are concentrated along the interface between the SCRW and the foundation,avoiding damage within the SCRW.The restoring force provided by the prestressed tendons can effectively realize self-centering capacity with small residual deformation,and the resilient performance of the SCRW is better than that of monolithic SW.In addition,the curved interface of the SCRW makes the rocking center change and move inward,partially relieving the stress concentration and crush of concrete.The rocking range of the rocking center is about 41.4%of the width of the SCRW.
基金Project(2006CB605202) supported by the Basic Research Development Program of China
文摘Counter gravity casting equipments(CGCE) were widely used to produce large thin-walled A357 aluminum alloy components. To improve the pressure control precision of CGCE to get high quality castings, a pressure control system based on fuzzy-PID hybrid control technology and the digital assembled valve was developed. The actual pressure tracking experiment results show that the special system by applying PID controller and fuzzy controller to varied phases, is not only able to inherit the small error and good static stability of classical PID control, but also has fuzzy control’s advantage of fully adapting itself to the object. The pressure control error is less than 0.3 kPa. By using this pressure control system, large complex thin-walled A357 aluminum alloy castings with high quality was successfully produced.
文摘The full operator method (FOM) has been proposed to overcome some of the shortcomings of the commonly used operator splitting method (OSM). In particular, the FOM is improved by increasing the accuracy of both the predictor and corrector using the estimated tangent stiffness of the tested structure. The numerical characteristics of the FOM, including stability and accuracy, are investigated in this study. It is shown that FOM is conditionally stable. The stability and accuracy characteristics are dependent on the accuracy of the estimated tangent stiffness and the parameters associated with the acceleration variation in the time-stepping integration method. Mass-spring systems with different types of nonlinearity, including hardening, stiffening, and softening behavior, are used to evaluate the performance of the FOM. It is found that the FOM can capture these types of nonlinearity with satisfactory accuracy. Using a prototype 12-story composite coupled wall system, the influences of the strong nonlinearity of the system as well as the displacement control errors from hydraulic actuators on the performance of the FOM are explored. The results show that the FOM is capable of generating reasonably accurate results despite the presence of strong structural nonlinearity and displacement control errors.