Hybrid Effects on MHD Mixed Convective Boundary Layer Flow through a Sloped Plate in Existence of Nanofluid-Saturated Porous Medium

This study examines the effects of heat, mass, and boundary layer assumptions-based nanoparticle characteristics on the hybrid effects of using MHD in conjunction with mixed convective flow through a sloped vertical pore plate in the existence of medium of porous. Physical characteristics such as thermo-diffusion, injection-suction, and viscous dissipation are taken into consideration, in addition to an equally distributed magnetic force utilized as well in the completely opposite path of the flow. By means of several non-dimensional transformations, the momentum, energy, concentration, and nanoparticle volume fraction equations under investigation are converted in terms of nonlinear boundary layer equations and computationally resolved by utilizing the sixth-order Runge-Kutta strategy in combination together with the iteration of Nachtsheim-Swigert shooting procedure. By contrasting the findings produced for a few particular examples with those found in the published literature, the correctness of the numerical result is verified, and a rather good agreement is found. Utilizing various ranges of pertinent factors, computing findings are determined not only regarding velocity, temperature, and concentration as well as nanoparticle fraction of volume but also concerning with local skin-friction coefficient, local Nusselt and general Sherwood numbers associated with nanoparticle Sherwood number. The findings of the study demonstrate that increasing the fluid suction parameter decreases the velocity and temperature of the flow field in conjunction with concentration and has a variable impact on the nanoparticle fraction of volume, despite an increasing behavior in the local skin friction coefficient and local Nusselt as well as general Sherwood numbers and an increasing behavior in the local nanoparticle Sherwood number. Furthermore, enhancing a Schmidt number leads to a reduction in the local nanoparticle Sherwood number and a rise in the nanoparticle proportion of volume. Along with concentration, it also reduces temperature and velocity. However, it also raises the local Sherwood and Nusselt numbers and reduces the local skin friction coefficient.

STUDY ON TENSILE FAILURE MECHANISM AND HYBRID EFFECT OF INTRAPLY HYBRID COMPOSITES

The random critical-core model is adapted to investigate the tensile failuremechanism and hybrid effect of unidirectionally arrayed hybrid composites with alternating low andhigh elongation fibers. By utilizing the model in conjunction with the results of the stressconcentration analysis in which the interfacial damage between fiber and matrix is considered, amicroscopic statistical analysis of both the first failure and ultimate failure of hybrids isperformed. The variations of the first failure strain, the ultimate failure strain and the hybrideffect as the interfacial shear strength are obtained quantitatively. The concept of the hybrideffect for strains has been clarified. The present results are compared with available experimentdata and a reasonable agreement is found between the analytical predictions and the experimentalresults.

Hybrid temperature effect on a quartz crystal microbalance resonator in aqueous solutions

The quartz crystal microbalance（QCM） is an important tool that can sense nanogram changes in mass. The hybrid temperature effect on a QCM resonator in aqueous solutions leads to unconvincing detection results. Control of the temperature effect is one of the keys when using the QCM for high precision measurements. Based on the Sauerbrey＇s and Kanazawa＇s theories, we proposed a method for enhancing the accuracy of the QCM measurement, which takes into account not only the thermal variations of viscosity and density but also the thermal behavior of the QCM resonator. We presented an improved Sauerbrey equation that can be used to effectively compensate the drift of the QCM resonator. These results will play a significant role when applying the QCM at the room temperature.

Effect of Wave Accessibility on Lower Hybrid Wave Current Drive in Experimental Advanced Superconductor Tokamak with H-Mode Operation

The effect of the wave accessibility condition on the lower hybrid cm＇rent drive in the experimental advanced superconductor Tokamak （EAST） plasma with H-mode operation is studied. Based on a simplified model, a mode conversion layer of the lower hybrid wave between the fast wave branch and the slow wave branch is proved to exist in the plasma periphery for typical EAST H-mode parameters. Under the framework of the lower hybrid wave simulation code （LSC）, the wave ray trajectory and the associated current drive are calculated numerically. The results show that the wave accessibility condition plays an important role on the lower hybrid current drive in EAST plasma. For wave rays with parallel refractive index n｜｜= 2.1 or n｜｜ = 2.5 launched from the outside midplane, the wave rays may penetrate the core plasma due to the toroida] geometry effect, while numerous reflections of the wave ray trajectories in the plasma periphery occur. However, low current drive efficiency is obtained. Meanwhile, the wave accessibility condition is improved if a higher confined magnetic field is applied. The simulation results show that for plasma parameters under present EAST H-mode operation, a significant lower hybrid wave current drive could be obtained for the wave spectrum with peak value n｜｜ = 2.1 if a toroidal magnetic field BT =2.5 T is applied.

Bistability in a Hybrid Optomechanical System under the Effect of a Nonlinear Medium

We investigate a hybrid optomechanical system consisting of two coupled cavities, one of them is composed of two-end fixed mirrors （called the traditional cavity）, and the other has a one-end oscillating mirror （named as the optomechanical cavity）. A Kerr medium is inside the traditional cavity to enhance the nonlinearity due to the fact that it can cause observing of bistable behavior in intracavity intensity for the optomechanical cavity. The Hamiltonian of the system is written in a rotating frame and its dynamics is described by quantum Langevin equations of motion. Our proposed system exhibits unconventional plots for the mean photon number of the optomechanical cavity which are not observed in previous works. The present results show a deep effect of the Kerr medium on optical bistability of intracavity intensity for the optomechanical cavity. Also, coupling strength of the cavities can effectively change the stability of the system.

Magnetocaloric effect in the layered organic–inorganic hybrid(CH_3NH_3)_2CuCl_4

We present a study of magnetocaloric effect of the quasi-two-dimensional（2D） ferromagnet（CH_3NH_3）_2CuCl_4 in ab plane（easy-plane）. From the measurements of magnetic field dependence of magnetization at various temperatures,we have discovered a large magnetic entropy change associated with the ferromagnetic–paramagnetic transition. The heat capacity measurements reveal an abnormal adiabatic change below the Curie temperature T_c^8.9 K, which is caused by the nature of quasi-2D layered crystal structure. These results suggest that perovskite organic–inorganic hybrids with a layered structure are suitable candidates as working substances in magnetic refrigeration technology.

Effects of proline on the seed-setting rate of hybrid rice

The seed-setting rate of hybrid rice is general-ly lower than that of conventional varieties.One of the factors explained this phenomenonis the proline concentration in anthers.Fiveconcentrations(30,50,80,120,and240 mg/kg)of exogenous proline were sprayedat meiosis stage of the early hybrid rice combi-nation Shanyou R3-2.Anthers were collected

Analysis of seed and maternal genetic effects on cooking quality characters in indica hybrid rice

We analysed seed and maternal genetic effects on characters of cooking quality in indica hybrid rice by using the model for quantitative characters of seeds of cereal crops. Incomplete diallel crosses were made by using six male sterile lines (Zhenshan 97A, Erjiuqing A, Erjiunan 1A, V20A, Zhe’nan 1A and Zhe’nan 3A)as females and three restorer lines(Cezao 2-2, T49 and 26715)as males. Sampled seeds were used to measure the cooking quality characters, including amylose content(%), gelatinization temperature(alkali spreading score)and gel consistency(mm). Results indicated that some rice cooking quality characters were controlled by both seed genes and maternal genes (see table). Gel consistency was mainly controlled by maternal effects, but also

Effect of irrigation modes on the senescence of hybrid rice after heading

The pot experiment was designed to investigate therelationship between the senescence of hybrid riceand the irrigation mode and conducted during1984-1985.There were 30 pots for each treatmentand each pot contained 17.5 kg soil.Hybrid riceShanyou 6 was sown on 10 Jun ahd transplanted

Optical study on intermediate-valence compounds Yb_(1-x)Lu_xAl_3

We report an optical spectroscopy study on intermediate valence system Ybl-xLuxA13 with x = 0, 0.25, 0.5, 0.75, and 1. The Kondo temperature in the system is known to increase with increasing Lu concentration. Therefore, it is expected that the energy scale of the hybridization gap should increase with increasing Lu concentration based on the periodic Anderson model. On the contrary, we find that the spectral structure associated with the hybridization effect shifts monotonically to lower energy. Furthermore, the Lu substitution results in a substantial increase of the free carrier spectral weight and less pronounced plasma frequency reduction upon lowering temperature. We attribute the effect to the disruption of the Kondo lattice periodicity by the random substitution of Yb by Lu. The work highlights the importance of the lattice periodicity of the rare earth element for understanding the Kondo lattice phenomena.

Hybrid effect on mechanical properties and high-temperature performance of copper matrix composite reinforced with micro-nano dual-scale particles

A dual-scale hybrid HfB_(2)/Cu-Hf composite with HfB_(2) microparticles and Cu_(5) Hf nanoprecipitates was designed and prepared.The contribution of the hybrid effect to the mechanical properties and high-temperature performances was studied from macro and micro perspectives,respectively.The hybrid of dual-scale particles can make the strain distribution of the composite at the early deformation stage more uniform and delay the strain concentration caused by the HfB_(2) particle.The dislocation pinning of HfB_(2) particles and the coherent strengthening of Cu_(5) Hf nanoprecipitates simultaneously play a strengthening role,but the strength of the hybrid composite is not a simple superposition of two strengthening mod-els.In addition,both Cu_(5) Hf nanoprecipitates and HfB_(2) microparticles contribute to the high-temperature performance of the composite,the growth and phase transition of nanoprecipitates at high temperature will reduce their contribution to strength,while the stable HfB_(2) particles can inhibit the coarsening of matrix grains and maintain the high-density geometrically necessary dislocations(GNDs)in the matrix,which ensures more excellent high-temperature resistance of the hybrid composite.As a result,the hy-brid structure can simultaneously possess the advantages of multiple reinforcements and make up for the shortcomings of each other.Finally,a copper matrix composite with high strength,high conductivity,and excellent high-temperature performance is displayed.

Filler Size Effect on Tuning Electrical,Mechanical,and Thermal Properties of Field Grading Composites

field-grading composite with a low switching field,stable nonlinear conductivity performance,and excellent mechanical and thermal properties was prepared by using hybrid ZnO micro-spherical varistors of different particle sizes as the fillers and silicone rubber as the matrix.The hybrid effects of particle size on the electrical,mechanical,and thermal properties of ZnO micro-spherical varistors composites are investigated.An increase in the ZnO micro-spherical varistor size in the composites will lower the switching field but lead to degradation of the mechanical properties and stability of the nonlinear conductivity properties.The silicone rubber is incorporated with a mixture of hybrid ZnO micro-spherical varistors of different sizes at an optimal mass ratio range exhibited low switching field,stable nonlinear conductivity performance,and excellent mechanical and thermal properties.Our findings are helpful to comprehensively regulate performance of advanced field-grading materials and increase stability and durability of electronic and electrical devices.

RSSI-Based 3D Wireless Sensor Node Localization Using Hybrid T Cell Immune and Lotus Optimization

Wireless Sensor Network(WSNs)consists of a group of nodes that analyze the information from surrounding regions.The sensor nodes are responsible for accumulating and exchanging information.Generally,node local-ization is the process of identifying the target node’s location.In this research work,a Received Signal Strength Indicator(RSSI)-based optimal node localization approach is proposed to solve the complexities in the conventional node localization models.Initially,the RSSI value is identified using the Deep Neural Network(DNN).The RSSI is conceded as the range-based method and it does not require special hardware for the node localization process,also it consumes a very minimal amount of cost for localizing the nodes in 3D WSN.The position of the anchor nodes is fixed for detecting the location of the target.Further,the optimal position of the target node is identified using Hybrid T cell Immune with Lotus Effect Optimization algorithm(HTCI-LEO).During the node localization process,the average localization error is minimized,which is the objective of the optimal node localization.In the regular and irregular surfaces,this hybrid algorithm effectively performs the localization process.The suggested hybrid algorithm converges very fast in the three-dimensional(3D)environment.The accuracy of the proposed node localization process is 94.25%.

Redox-responsive polymer prodrug/AgNPs hybrid nanoparticles for drug delivery

A drug carrier system of the hybrid nanoparticles based on the redox-responsive P[（2-（（2-（（camptothecin）-oxy）ethyl）disulfanyl）ethylmethacrylate）-co-（2-（D-galactose）methylmethacryl-ate）]（P（MACPTS-co-MAGP）） and AgNPs is developed to deliver the anti-cancer drug camptothecin（CPT） and monitor the drug release by the recovery of the fluorescence of CPT. CPT is linked to the polymer sidechains via a redox-responsive disulfide bond, attaching on the surface of AgNPs and leading to the quenching of CPT fluorescence（ ＂off＂ state） due to the nanoparticle surface energy transfer（NSET） effect.Upon the exposure to glutathione（GSH）, the disulfide bond is cleaved to release CPT, resulting in the recovery of the fluorescence of CPT（＂on＂ state）. The system offers a platform to track the CPT delivery and releasing in real time

First-principles calculation on electronic properties of B and N co-doping carbon nanotubes

We apply the Heyd-Scuseria-Ernzerhof hybrid functional calculation to study the（2, 3） nanotube codoped with various compositions of nitrogen and boron atoms. We find that the bandgaps and other properties of doped nanotubes oscillate with the doped compositions. Our study should shed light on the understanding of the properties of doped small nanotubes. This might have potential in designing new nano electronic-devices.

Analysis of turbulent MHD Couette nanofluid flow and heat transfer using hybrid DTM-FDM

Unsteady turbulent magnetohydrodynamic nanofluid hydrothermal treatment is studied. The zero- equation turbulence model is used to simulate turbulent flow. The modeling results obtained by applying the hybrid differential transformation method-finite difference method to solve this problem confirm its viability. An analytical procedure is used for finding the effects of the problem parameters. Results indicate that the average Nusselt number over the lower plate depends linearly on volume fraction of nanofluid, Hall parameter, turbulent Eckert number, and Reynolds number whereas it is inversely proportional on the Hartmann number and the turbulent parameter.