Deposition processes of gas hydrate-bearing sediments in the inter-canyon area of Shenhu Area in the northern South China Sea

The Shenhu Submarine Canyon Group on the northern slope of the South China Sea consists of 17 slope-confined canyons,providing a good example for investigating their hosting sediments.Three drilling sites,including W07,W18,and W19,have proven the occurrence of gas hydrate reservoirs in the inter-canyon area between canyons C11 and C12.Whereas,variations of the geomorphology and seismic facies analyzed by high-resolution 3D seismic data indicate that the gas hydrate-bearing sediments may form in different sedimentary processes.In the upper segment,a set of small-scale channels with obvious topographic lows can be identified,revealing fine-grained turbidites supplied from the shelf region during a very short-term sea-level lowstand.In the middle part,gas hydrate units at Site W07 showing mounded or undulation external configuration are interpreted as sliding sedimentary features,and those features caused by gravity destabilization were the main formative mechanism of gas hydrate-bearing sediments that were sourced from the upper segments.In contrast,for the canyon transition zone of lower segments between C11-C12 inter-canyon and C12 intra-canyon areas,where W18 and W19 sites are located,the gas hydratebearing sediments are deposited in the channelized feature in the middle to lower segment and slide erosive surface.Gas hydrate-bearing sediments of the lower segment were migrated through channelized features interconnecting with the middle to lower slope by gravity-driven flows.The majority of deposits tended to be furtherly moved by lateral migration via erosive surface created by sediment failed to intra-canyon area.The conclusion of this study may help better understand the interaction between the formation mechanism of gas hydrate-bearing sediments and the geomorphologic effects of inter-canyon areas.

Experimental investigation on the effective thermal conductivities of different hydrate-bearing sediments

The natural gas hydrate has been regarded as an important future green energy.Significant progress on the hydrate exploitation has been made,but some challenges are still remaining.In order to enhance the hydrate exploitation efficiency,a significant understanding of the effective thermal conductivity(ETC)of the hydrate-bearing sediment has become essential,since it directly controls the heat and mass transfer behaviors,and thereby determines the stability of hydrate reservoir and production rate.In this study,the effective thermal conductivities of various hydrate-bearing sediments were in-situ measured and studied.The impacts of temperature,particle size and type of sediment were investigated.The effective thermal conductivities of the quartz sand sediments before and after hydrate formation were in-situ measured.The results show the weak negative correlation of effective thermal conductivity of the quartz sand sediment on the temperature before and after the hydrate formation.The effective thermal conductivity of the hydrate-bearing sediment decreases with the increase of particle size of the sediment.The dominant effect of the type of porous medium on the characteristics of the effective thermal conductivity of hydrate-bearing sediment was highlighted.The results indicate that both the effective thermal conductivities of hydrate-bearing quartz sand sediment and hydrate-bearing silicon carbide sediment are weakly negatively correlated with temperature,but the effective thermal conductivity of hydrate-bearing clay sediment is weakly positively dependent on the temperature.In addition,the values of the effective thermal conductivities of various hydrate-bearing sediments are in the order of hydrate-bearing silicon carbide sediment>hydrate-bearing quartz sand sediment>hydrate-bearing clay sediment.These findings could suggest that the intrinsic thermal conductivity of porous medium could control the characteristics of effective thermal conductivity of hydrate-bearing sediment.

Mechanical properties of gas hydrate-bearing sediments during hydrate dissociation

The changes in the mechanical properties of gas hydrate-bearing sediments(GHBS) induced by gas hydrate(GH) dissociation are essential to the evaluation of GH exploration and stratum instabilities. Previous studies present substantial mechanical data and constitutive models for GHBS at a given GH saturation under the non-dissociated condition. In this paper, GHBS was formed by the gas saturated method, GH was dissociated by depressurization until the GH saturation reached different dissociation degrees. The stress–strain curves were measured using triaxial tests at a same pore gas pressure and different confining pressures. The results show that the shear strength decreases progressively by 30%–90% of the initial value with GH dissociation, and the modulus decreases by 50% –75%. Simplified relationships for the modulus, cohesion, and internal friction angle with GH dissociated saturation were presented.

Theoretical analysis and numerical simulation of acoustic waves in gas hydrate-bearing sediments

Based on Carcione-Leclaire model,the time-splitting high-order staggered-grid finite-difference algorithm is proposed and constructed for understanding wave propagation mechanisms in gas hydrate-bearing sediments.Three compressional waves and two shear waves,as well as their energy distributions are investigated in detail.In particular,the influences of the friction coefficient between solid grains and gas hydrate and the viscosity of pore fluid on wave propagation are analyzed.The results show that our proposed numerical simulation algorithm proposed in this paper can effectively solve the problem of stiffness in the velocity-stress equations and suppress the grid dispersion,resulting in higher accuracy compared with the result of the Fourier pseudospectral method used by Carcione.The excitation mechanisms of the five wave modes are clearly revealed by the results of simulations.Besides,it is pointed that,the wave diffusion of the second kind of compressional and shear waves is influenced by the friction coefficient between solid grains and gas hydrate,while the diffusion of the third compressional wave is controlled by the fluid viscosity.Finally,two fluid-solid(gas-hydrate formation)models are constructed to study the mode conversion of various waves.The results show that the reflection,transmission,and transformation of various waves occur on the interface,forming a very complicated wave field,and the energy distribution of various converted waves in different phases is different.It is demonstrated from our studies that,the unconventional waves,such as the second and third kinds of compressional waves may be converted into conventional waves on an interface.These propagation mechanisms provide a concrete wave attenuation explanation in inhomogeneous media.

Drucker-Prager Elasto-Plastic Constitutive Model for Methane Hydrate-Bearing Sediment

A constitutive model for methane hydrate-bearing sediment(MHBS)is essential for the analysis of mechanical response of MHBS to the change of hydrate saturation caused by gas extraction. A new elasto-plastic constitutive model is built in order to simulate the mechanical behavior of MHBS in this paper. This model represents more significant mechanical properties of MHBS such as bonding, higher stiffness, softening and stress-strain nonlinear relationship. The bonding behavior can be described by use of a parameter related to mechanical hydrate saturation. Higher stiffness can be modeled by the introduction of hydrate saturation into traditional expression of soil stiffness. Softening can be controlled by a function describing the relationship between cohesion and bonding structure factor. Dilatancy can be estimated by establishing the relationship between the lateral strain and axial strain. Meanwhile, the hypothesis of isotropic expanding is applied to the calculation of the volumetric strain. The stress-strain curves under different hydrate saturation conditions predicted by the proposed model are in good agreement with the test data. All the coefficients can be easily obtained by the triaxial test of MHBS.

Experimental Study on Mechanical Properties of Gas Hydrate-Bearing Sediments Using Kaolin Clay

A triaxial system is designed with a temperature range from -20 ℃ to 25℃ and a pressure range from 0 MPa to 30 MPa in order to improve the understanding of the mechanical properties of gas hydrate-bearing sediments. The mechanical properties of synthetic gas hydrate-bearing sediments （gas hydrate-kaolin clay mixture） were measured by using current experimental apparatus. The results indicate that： （1） the failure strength of gas hydrate-bearing sediments strongly depends on the temperature. The sediment＇s strength increases with the decreases of temperature. （2） The maximum deviator stress increases linearly with the confining pressure at a low-pressure stage. However, it fluctuates at a high-pressure stage. （3） Maximum deviator stress increases with increasing strain rate, whereas the strain-stress curve has no tremendous change until the axial strain reaches approximately 0.5%. （4） The internal friction angles of gas hydrate-bearing sediments are not sensitive to kaolin volume ratio. The cohesion shows a high kaolin volume ratio dependency.

Experimental study on mechanical properties of methane-hydrate-bearing sediments

Mechanical properties of methane hydrate- bearing-sediments （MHBS） are basic parameters for safety analysis of hydrate exploration and exploitation. Young＇s modulus, cohesion, and internal friction angle of hydrate- bearing sediments synthesized in laboratory, are investigated using tri-axial tests. Stress-strain curves and strength parameters are obtained and discussed for different compositions and different hydrate saturation, followed by empirical expressions related to the cohesion, internal friction angle, and modulus of MHBS. Almost all tested MHBS samples exhibit plastic failure. With the increase of total saturation of ice and methane hydrate （MH）, the specimens＇ internal friction angle decreases while the cohesion increases.

Saturation Estimation with Complex Electrical Conductivity for Hydrate-Bearing Clayey Sediments:An Experimental Study

Clays have considerable influence on the electrical properties of hydrate-bearing sediments.It is desirable to understand the electrical properties of hydrate-bearing clayey sediments and to build hydrate saturation(S_(h))models for reservoir evaluation and monitoring.The electrical properties of tetrahydrofuran-hydrate-bearing sediments with montmorillonite are characterized by complex conductivity at frequencies from 0.01 Hz to 1 kHz.The effects of clay and Sh on the complex conductivity were analyzed.A decrease and increase in electrical conductance result from the clay-swelling-induced blockage and ion migration in the electrical double layer(EDL),respectively.The quadrature conductivity increases with the clay content up to 10%because of the increased surface site density of counterions in EDL.Both the in-phase conductivity and quadrature conductivity decrease consistently with increasing Sh from 0.50 to 0.90.Three sets of models for Sh evaluation were developed.The model based on the Simandoux equation outperforms Archie’s formula,with a root-mean-square error(E_(RMS))of 1.8%and 3.9%,respectively,highlighting the clay effects on the in-phase conductivity.The fre-quency effect correlations based on in-phase and quadrature conductivities exhibit inferior performance(E_(RMS)=11.6%and 13.2%,re-spectively)due to the challenge of choosing an appropriate pair of frequencies and intrinsic uncertainties from two measurements.The second-order Cole-Cole formula can be used to fit the complex-conductivity spectra.One pair of inverted Cole-Cole parameters,i.e.,characteristic time and chargeability,is employed to predict S_(h) with an E_(RMS) of 5.05%and 9.05%,respectively.

Mechanical Properties of Methane Hydrate-Bearing Interlayered Sediments

The complex distribution of gas hydrate in sediments makes understanding the mechanical properties of hydrate-bearing sediments a challenging task.The mechanical behaviors of hydrate-bearing interlayered sediments are still poorly known.A series of triaxial shearing tests were conducted to investigate the strength parameters and deformation properties of methane hydrate-bearing interlayered sediments at the effective pressure of 1 MPa.The results indicate that the stress-strain curves of hydrate-bearing interlayered sediments are significantly different from that of hydrate-bearing sediments.The peak strength,Young's modulus,initial yielding modulus,and failure mode are deeply affected by the methane hydrate distribution.The failure behaviors and mechanism of strain softening and hardening patterns of the interlayered specimens are more complicated than those of the integrated specimens.This study compares the different mechanical behaviors between integrated and interlayered specimens containing gas hydrate,which can serve as a reference for the prediction and analysis of the deformation behaviors of natural gas hydrate reservoirs.

Simulation experiments on gas production from hydrate-bearing sediments

Experiments were made on 58 sediment samples from four sites(1244,1245,1250 and 1251) of ODP204 at five temperature points(25,35,45,55 and 65℃) to simulate methane production from hydrate-bearing sediments.Simulation results from site 1244 show that the gas components consist mainly of methane and carbon dioxide,and heavy hydrocarbons more than C2+ cannot be detected.This site also gives results,similar to those from the other three,that the methane production is controlled by experimental temperatures,generally reaching the maximum gas yields per gram sediment or TOC under lower temperatures(25 and 35 ℃).In other words,the methane amount could be related to the buried depth of sediments,given the close relation between the depth and temperature.Sediments less than 1200 m below seafloor are inferred to still act as a biogenic gas producer to pour methane into the present hydrate zone,while sedimentary layers more than 1200 m below seafloor have become too biogenically exhausted to offer any biogas,but instead they produce thermogenic gas to give additional supply to the hydrate formation in the study area.

Gravity-Driven Listric Growth Fault and Sedimentation in the Lagoa do Peixe, Rio Grande do Sul Coastal Plain, Brazil

High frequency, high resolution GPR surveys are successfully applied to investigate near-surface stratification architecture of sedimentary units in coastal plains and to define their depositional conditions. However, low frequency GPR surveys to investigate fault-related depositional systems at greater depths are scarce. This survey was designed investigate a > 100 km long linear escarpment that controls the northwest margin of the Lagoa do Peixe, an important lagoon in Rio Grande do Sul Coastal Plain (RGSCP, Brazil). The traditional approach points that RGSCP was developed by juxtaposition of four lagoons/barrier systems as consequence of sea level changes;no deformational structure is admitted to exist before. The low frequency GPR (50 MHz, RTA antenna) and geological surveys carried out in the RGSCP showed the existence of a large, gravity-driven listric growth fault controlling the Lagoa do Peixe escarpment and hangingwall sedimentation. The radargrams in four subareas along the Lagoa do Peixe Growth Fault could be interpreted following the seismic expression of rift-related depositional systems. The radargrams enabled to distinguish three main lagoonal deposition radarfacies. The lower lagoonal radarfacies is a convex upward unit, thicker close to growth fault;the radarfacies geometry indicates that fault displacement rate surpasses the sedimentation rate, and its upper stratum is aged ~3500 l4C years BP. The second lagoonal radarfacies is a triangular wedge restricted to the lagoon depocenter, whose geometry indicates that fault displacement and the sedimentation rates kept pace. The upper lagoonal radarfacies is being deposited since 1060 ± 70 l4C years BP, under sedimentation rate higher than fault displacement rate. The results indicate that low frequency GPR surveys can help in investigating fault-related depositional systems in coastal zones. They also point to a new approach in dealing with RGSCP stratigraphy.

Microplastics in sediment of the Three Gorges Reservoir:abundance and characteristics under different environmental conditions

Freshwater microplastic pollution is an urgent issue of global concern,and research on the distribution in reservoirs is lacking.We investigated the microplastic pollution levels in wet sediments collected from the Three Gorges Reservoir,the largest reservoir of China.Results show that microplastics were ubiquitous in the sediments of the Three Gorges Reservoir,and their abundance ranged from 59 to 276 pp/kg(plastic particles per kg,dry weight).Economic development and total population were important factors affecting the spatial heterogeneity of microplastic abundance,and the contribution of large cities along the reservoir to microplastic pollution should be paid with more attention.Fibrous microplastics were the most abundant type of microplastic particles in reservoir sediments,whereas polystyrene,polypropylene,and polyamide were the main types of polymers.The apparent spatial heterogeneity in morphology and color of microplastics is attributed to different anthropogenic or landbased pollution sources.Moreover,the accumulation of microplastics near the inlet of tributaries reflects the role of potential contributors of tributaries.More importantly,multiple bisphenols(BPs)and heavy metals detected at the microplastic surfaces indicate that microplastics can act as carriers of these pollutants in the environment in the same way as sediments did,which may alter the environmental fate and toxicity of these pollutants.Therefore,we conclude that the Three Gorges Reservoir had been contaminated with microplastics,which posed a stress risk for organisms who ingest them along with their associated pollutants(BPs,heavy metals).

Provenance and depositional setting of the Late MiocenePleistocene clastic sediments in the eastern Arabian Peninsula and western Iraq using rare earth elements geochemistry

The sandstones of the Late miocene–Pliocene Dibdibba Formation in the Najaf–Karbala Plateau and Basra were examined to determine their source rocks and origin. The rare earth elements(REE) and trace elements(Sc, Co, V, and Th) concentrations in these sandstones revealed that they likely derived from a single source. The steep light rare earth elements(LREE) and flat, heavy rare earth element(HREE) patterns, negative Eu anomaly, and high ΣREE contents in sandstones suggest its derivation from a suggests that a passive continental margin environment and originated from felsic source rocks. The average concentration of ΣREE is 93.5 ppm, which is lower than that of the average crustal compositions like Upper Continental Crust and Post Archean Australian Shale. The higher proportion of LREE compared to HREE implies that these sandstones were recycled and derived from a distal source. The Th/Co, Th/Sc, La/Sc, La/Co, Eu/Eu*and(La/Lu)cn elemental ratios indicated that these Late Miocene–Pliocene sandstones were derived from felsic rocks located in the marginal region of the Arabian Shield.

Tracing suspended and bed sediments during high and low water periods using geochemical characteristics-Case study:Vazrood watershed,northern Iran

Complete and comprehensive information about sediment dynamic and identification of hotspots of sediment production and transport are necessary for understanding the erosion processes and increasing the efficiency of soil and water conservation practices.Numerous studies used the sediment fingerprint techniques to investigate the contribution of different sources in suspended and bed sediment yield of the watersheds.However,the contribution of various land use/land covers in suspended and bed sediment yield for the great Caspian Sea basin is in an aura of ambiguity and the present study was conducted to gather information about an important part of this area in northern Iran,where rangelands are located upstream of Hyrcanian forests and dense agricultural lands are located downstream.The surface soil of different land use/land covers including forest,rangeland,agriculture and streambank lands were sampled in 30 points.Suspended and bed sediments were sampled in the watershed outlet in two high and low water periods.Geochemical characteristics of soil and sediment samples containing 59 elements were measured using ICP-OES GBC Integra.The reliable and suitable tracers from 59 elements were then selected using Range test,Kruskal-Wallis and Discriminant Function Analysis,respectively,in FingerPro package of R software.The results showed that for suspended sediment,streambank and rangeland had the highest contributions of 86.2%and 47.5%,respectively,in two high and low water periods.For bed sediment,in two high and low water periods,rangeland and streambank had the highest contributions of 73.8%and 84.4%,respectively.Land use change and especially human activities such as agriculture,road construction and development of residential areas along the main river riparian zone has led to a significant increase in suspended and bed sediments.

Diversity, Ecology, and Environmental Significance of Foraminifera in Al Hamama and Susah Coastal Regions, Northeastern Libya: Insights from Holocene Sediments

This research initiative, conducted along the coastal zones of Al Hamama and Susah in northeastern Libya, aimed to enhance our understanding of Holocene benthic foraminifera assemblages and the paleoenvironmental parameters in the region. We meticulously gathered five sediment samples to analyze the composition of foraminifera populations within the unconsolidated sedimentary deposits adjacent to these locations. We successfully identified nine distinct benthic foraminifera species, including Amphistegina lobifera, Eliphidium crispum, Sigmoilinita tenuis, Sorites orbiculus, Stomatorbina concentrica, Peneroplis planatus, Pseudotriloculina rotunda, Pyrgoella sphaera, and Triloculina schreberiana. Notably, Eliphidium crispum and Amphistegina lobifera emerged as the most prevalent species. These foraminifera species exhibited distinct ecological preferences, shedding light on paleoenvironmental conditions and climatic fluctuations during the Quaternary Period in the Susah and Al Hamama coastal regions. The presence of Orbulina universa, a planktonic foraminifera species, further enriched our understanding of the paleoenvironment by providing insights into specific water depths and temperature ranges. This research significantly contributes to paleoceanography and environmental reconstruction, highlighting the invaluable use of foraminifera as proxies for exploring past environmental changes. Additionally, the study investigated the impacts of anthropogenic influences on benthic ecosystems in the Al Hamama and Susah coastal areas. These influences included reworked foraminifera specimens and the effects of karst formations, acid rain, and eutrophication. Notably, human-induced factors have visibly affected biogenic fauna and ecosystem dynamics in the study area. Consequently, this research provides valuable insights into paleoenvironmental conditions and ecological dynamics within the Susah and Al Hamama coastal regions, emphasizing the crucial role of foraminifera in reconstructing historical environmental fluctuations.

Learning Discriminatory Information for Object Detection on Urine Sediment Image

In clinical practice,the microscopic examination of urine sediment is considered an important in vitro examination with many broad applications.Measuring the amount of each type of urine sediment allows for screening,diagnosis and evaluation of kidney and urinary tract disease,providing insight into the specific type and severity.However,manual urine sediment examination is labor-intensive,time-consuming,and subjective.Traditional machine learning based object detection methods require hand-crafted features for localization and classification,which have poor generalization capabilities and are difficult to quickly and accurately detect the number of urine sediments.Deep learning based object detection methods have the potential to address the challenges mentioned above,but these methods require access to large urine sediment image datasets.Unfortunately,only a limited number of publicly available urine sediment datasets are currently available.To alleviate the lack of urine sediment datasets in medical image analysis,we propose a new dataset named UriSed2K,which contains 2465 high-quality images annotated with expert guidance.Two main challenges are associated with our dataset:a large number of small objects and the occlusion between these small objects.Our manuscript focuses on applying deep learning object detection methods to the urine sediment dataset and addressing the challenges presented by this dataset.Specifically,our goal is to improve the accuracy and efficiency of the detection algorithm and,in doing so,provide medical professionals with an automatic detector that saves time and effort.We propose an improved lightweight one-stage object detection algorithm called Discriminatory-YOLO.The proposed algorithm comprises a local context attention module and a global background suppression module,which aid the detector in distinguishing urine sediment features in the image.The local context attention module captures context information beyond the object region,while the global background suppression module emphasizes objects in uninformative backgrounds.We comprehensively evaluate our method on the UriSed2K dataset,which includes seven categories of urine sediments,such as erythrocytes(red blood cells),leukocytes(white blood cells),epithelial cells,crystals,mycetes,broken erythrocytes,and broken leukocytes,achieving the best average precision(AP)of 95.3%while taking only 10 ms per image.The source code and dataset are available at https://github.com/binghuiwu98/discriminatoryyolov5.

Assessment of Selenium Contamination in Sediments of the Aby and Tendo Lagoons in Côte d’Ivoire

Selenium is a trace element that can have both beneficial and harmful effects on aquatic life. The Aby Lagoon is a coastal environment in Côte d’Ivoire that receives selenium inputs from various natural and anthropogenic sources. The aim of this study was to assess the levels of selenium in the sediments of the Aby Lagoon and its tributaries, the Tanoe River and the Tendo Lagoon, and to examine the spatial and seasonal variations of selenium concentrations. Sediment samples were collected from different sites and seasons, and selenium concentrations were measured by atomic fluorescence spectrometry. The results showed that the average concentration of selenium in the sediments of the Aby Lagoon was 0.82 mg/kg, indicating moderate contamination. The concentration of selenium varied between sites and seasons, with higher values in the channel of the Tendo Lagoon and during the dry season. The study highlighted the complexity of selenium dynamics in aquatic ecosystems, and the need to take into account seasonal and spatial variability as well as interactions between environmental factors. The study also suggested potential ecotoxicological risks for some sensitive organisms in certain areas of the lagoon. This study contributes to the knowledge of the dynamics of selenium in lagoon ecosystems and to the assessment of the environmental risks associated with its presence.

Volume-averaged modeling of multiphase solidification with equiaxed crystal sedimentation in a steel ingot

Macrosegregation is a critical factor that limits the mechanical properties of materials.The impact of equiaxed crystal sedimentation on macrosegregation has been extensively studied,as it plays a significant role in determining the distribution of alloying elements and impurities within a material.To improve macrosegregation in steel connecting shafts,a multiphase solidification model that couples melt flow,heat transfer,microstructure evolution,and solute transport was established based on the volume-averaged Eulerian-Eulerian approach.In this model,the effects of liquid phase,equiaxed crystals,columnar dendrites,and columnar-to-equiaxed transition(CET)during solidification and evolution of microstructure can be considered simultaneously.The sedimentation of equiaxed crystals contributes to negative macrosegregation,where regions between columnar dendrites and equiaxed crystals undergo significant A-type positive macrosegregation due to the CET.Additionally,noticeable positive macrosegregation occurs in the area of final solidification in the ingot.The improvement in macrosegregation is beneficial for enhancing the mechanical properties of connecting shafts.To mitigate the thermal convection of molten steel resulting from excessive superheating,reducing the superheating during casting without employing external fields or altering the design of the ingot mold is indeed an effective approach to control macrosegregation.

Assessment of Radiological Hazards of Sedimentary, Igneous and Sediments Natural Rocks

Gamma-ray spectroscopy based on a 100% efficiency hyper-pure germanium detector was used to evaluate the activity concentrations of 226Ra, 232Th, and 40K natural radionuclides in sedimentary, conglomerate, igneous and sedi-ments rock samples collected from four different locations in Eastern desert in Egypt. The obtained activity concentrations are used to evaluate the radi-ological hazards indices, absorbed dose rate, annual effective dose equivalent in air, radium equivalent, external and internal hazard index, radiation level index, annual gonadal dose equivalent, excess lifetime cancer risk and expo-sure rate. The results show that 1) the absorbed dose rate depends on the rock type, 2) the annual effective dose equivalent in air in 71% of sample below 20 mSvy-1 (permissible limit for workers), 3) the conglomerate rocks show low radioactivity level, 4) sedimentary rocks are rich in radium while igneous rocks are rich in thorium and the sediments rocks are rich in both radium and thorium.

Evaluation of Agricultural Contamination Level by Heavy Metals and Pesticides in Sediments of Rivers and Water Bodies for Shrimp Fishing in the Lower Ouémé: Case of the Aguigadji, Ahlan and Sele Stations in Benin

This study assessed sediment contamination by heavy metals and pesticide active ingredients linked to chemical inputs used in agricultural activities in the lower Ouémé. Pesticide residues from the organochlorine, pyrethroid and organophosphorus families were investigated by gas chromatography, and heavy metals (Cd, Pb, As, Ni, Zn, Fe, Mg, Cr and Hg) by atomic absorption spectrophotometry. The metallic pollution indices, the contamination factor (CF) and the ecological risk index were calculated. The results revealed 8 active ingredients in the rainy season and 9 in the dry season. Glyphosate was the active ingredient with the highest concentration at all stations, 9.65 ± 0.84 mg/kg recorded in the dry season at the Aguigadji station. All glyphosate values were above the EQS. DDT, Atrazine and Endosulfan also showed high concentrations in the dry and rainy seasons. Emamectin, Abamectin and Lambda Cyhalothrin also showed high concentrations in the dry season at Aguigadji, Ahlan and Sele. Only glyphosate was recorded at the control station (Toho), but in very low concentrations. Lead showed the highest concentrations at all the stations, 265.96 ± 21.02 mg/Kg in the rainy season and 255.38 ± 79.09 mg/Kg in the dry season, all detected at the Aguigadji station and above the EQS. Zn, Ni, Fe, Cu and Cr were all representative in both the dry and rainy seasons at the contaminated stations. Manganese showed high concentrations in the rainy season. Pb showed very high contamination (FC ≥ 6) at the Aguigadji and Ahlan stations and significant contamination (3 ≤ FC 6) at the Sele station in both the rainy and dry seasons. Ni, Hg and Cd, showed either moderate or significant contamination at the contaminated stations. The risk values showed a considerable ecological Ri (190 ≤ Ri < 380) in the rainy season and a moderate ecological Ri (95 ≤ Ri < 190) in the dry season at these contaminated stations.