Previous studies have shown that porous hydrated calcium silicate (PS) is very effective in decreasing cadmium (Cd) content in brown rice. However, it is unclear whether the PS influences cadmium transformation in...Previous studies have shown that porous hydrated calcium silicate (PS) is very effective in decreasing cadmium (Cd) content in brown rice. However, it is unclear whether the PS influences cadmium transformation in soil. The present study examined the effect of PS on pH, cadmium transformation and cadmium solubility in Andosol and Alluvial soil, and also compared its effects with CaCO3, acidic porous hydrated calcium silicate (APS) and silica gel. Soil cadmium was operationally fractionationed into exchangeable (Exch), bound to carbonates (Carb), bound to iron and manganese oxides (FeMnOx), bound to organic matters (OM) and residual (Res) fraction. Application of PS and CaCO3 at hig rates enhanced soil pH, while APS and silica gel did not obviously change soil pH. PS and CaCO3 also increased the FeMnOx-Cd in Andosol and Carb-Cd in Alluvial soil, thus reducing the Exch-Cd in the tested soils. However, PS was less effective than CaCO3 at the same application rate. Cadmium fractions in the two soils were not changed by the treatments of APS and silica gel. There were no obvious differences in the solubility of cadmium in soils treated with PS, APS, silica gel and CaCO3 except Andosol treated 2.0% CaCO3 at the same pH of soil-CaC12 suspensions. These findings suggested that the decrease of cadmium availability in soil was mainly attributed to the increase of soil pH caused by PS.展开更多
The problems of traditional concrete such as brittleness,poor toughness and short service life of concrete engineering under acid rain or marine environment need to be solved urgently.Hydrated calcium silicate(C-S-H)i...The problems of traditional concrete such as brittleness,poor toughness and short service life of concrete engineering under acid rain or marine environment need to be solved urgently.Hydrated calcium silicate(C-S-H)is a key component to improve the mechanical properties and durability of concrete.However,the traditional method of concrete material design based on empirical models or comparative tests has become a bottleneck restricting the sustainable development of concrete.The synthesis method,molecular structure and properties of C-S-H were systematically described in this paper;The interface structure and interaction of graphene oxide/calcium silicate hydrate(C-S-H/GO)were discussed.On this basis,the saturated and unsaturated transport characteristics of ions and water molecules in C-S-H/GO nanochannels under the environment of ocean and acid rain were introduced.The contents of this review provide the basis for improving the multi-scale transmission theory and microstructure design of concrete.It has important guiding significance for analyzing and improving the service life of concrete in complex environment.展开更多
Calcium silicate hydrate(C-S-H)is the mainly strength source of cement-based materials,but there is little basic research.In this paper,molecular dynamics method is applied to analyze the multi-scale tensile strength ...Calcium silicate hydrate(C-S-H)is the mainly strength source of cement-based materials,but there is little basic research.In this paper,molecular dynamics method is applied to analyze the multi-scale tensile strength and tensile strain of C-S-H layered materials under the condition of external physical fields(temperature and strain rate).The results show that the tensile strength and strain of C-S-H model decrease with temperature raises.The temperature(from 1 K to 600 K)has obvious influence on the tensile strain and strength of C-S-H layered materials.In addition,at(0.00025 ps^(-1)-0.001 ps^(-1)),the tensile strain and strength of C-S-H layered materials are less sensitive to strain rate.The whole model is closer to a 3-dimensional deformation.However,at(0.001 ps^(-1)-0.005 ps^(-1)),the dynamic load effect begins to increase,and the work done by the load per unit time increased.The tensile strain and strength of C-S-H layered materials indicates intensified by the change of strain rate.The energies are randomly distributed in the system,not concentrated in a certain area.展开更多
In order to expand the advantages of strong durability and high compressive strength of calcium silicate hydrates(C-S-H),at the same time to make up for the poor early mechanical strength of magnesium silicate hydrate...In order to expand the advantages of strong durability and high compressive strength of calcium silicate hydrates(C-S-H),at the same time to make up for the poor early mechanical strength of magnesium silicate hydrates (M-S-H),we present the features and advantages of C-S-H and M-S-H and a comprehensive review of the progress on CaO-MgO-SiO_(2)-H_(2)O.Moreover,we systematically describe natural calcium and magnesium silicate minerals and thermodynamic properties of CaO-MgO-SiO_(2)-H_(2)O.The effect of magnesium on C-S-H and calcium on M-S-H is summarized deeply;the formation and structural feature of CaO-MgO-SiO_(2)-H_(2)O is also explained in detail.Finally,the development of calcium and magnesium silicate hydrates in the future is pointed out,and the further research is discussed and estimated.展开更多
The samples of the C-S-H series were synthesized by hydrothermal reaction of fumed silica, CaO and deionized water at initial C/S ratios between 1.0-1.7. Phase composition and structural and morphology characteristics...The samples of the C-S-H series were synthesized by hydrothermal reaction of fumed silica, CaO and deionized water at initial C/S ratios between 1.0-1.7. Phase composition and structural and morphology characteristics of C-S-H samples were analyzed by XRD, IR and SEM. The experimental results showed that the d-spacing of (002), (110) and (020) decreased, the d-spacing of (200) increased, and the d-spacing of (310) varied randomly, the polymerization of silica tetrahedra of C-S-H decreased, and morphology of C-S-H samples varied from sheet shapes to long reticular fibers as C/S ratio increased.展开更多
Coal fly ash is a typical secondary aluminum/silicon resource.The preparation of zeolite-type absorbent is a potential way for its value-added utilization,while the purity and adsorption property of zeolite are limite...Coal fly ash is a typical secondary aluminum/silicon resource.The preparation of zeolite-type absorbent is a potential way for its value-added utilization,while the purity and adsorption property of zeolite are limited due to the occurrence of side reactions in the synthesis process.In this study,a designated composite consisted of crystalline zeolites and amorphous calcium silicate hydrate was selected,which was direct synthesized from fly ash under conditions of a Ca/Si molar ratio of 0.8,an initial NaOH concentration of 0.5 mol/L,a hydrothermal temperature of 170℃and a liquid–solid ratio of 15 mL/g.The results indicated that this composite had superior adsorption property for a variety of heavy metals,which was based on the exchange of calcium and sodium ions in zeolites and calcium silicate hydrate.Its adsorption capacities for Pb^(2+),Ni^(2+),Cd^(2+),Zn^(2+),Cu^(2+)and Cr^(3+)attained 409.4,222.4,147.5,93.2,101.1 and 157.0 mg/g,respectively,in single solution with a pH of 4.5.After regulating the synthesis conditions,the transformation of amorphous calcium silicate hydrate into crystallized tobermorite weakened the adsorption capacity of the composite.Besides,due to the competitive adsorption in a multiple ions solution,the adsorption capacities for these heavy metals had a reduction.展开更多
C-S-H series are synthesized at different temperatures and ages by pozzolanic reaction.The change of particle size distribution,phase composition,morphology and nanostructure of C-S-H with temperatures and ages,and th...C-S-H series are synthesized at different temperatures and ages by pozzolanic reaction.The change of particle size distribution,phase composition,morphology and nanostructure of C-S-H with temperatures and ages,and the effects of C-S-H seeds and seeds parameters on the hydration behavior and mechanical properties development of cement were investigated by DLS,XRD,SEM,^(29)Si NMR,TAM-air isothermal calorimeter and mechanical properties test.The results show that the particle size,crystallinity,basal spacing and Q^(2)/Q^(1) ratio of C-S-H increases with the increase of synthesis temperature and age.The addition of synthesized C-S-H seeds to cement pastes results in the strong acceleration effect on cement hydration and significant improvement of the early strength of cement paste and mortar.The 1 day-C-S-H seeds synthesized at room temperature can increase the strength of cement paste by about 30 MPa at 12 h.The effect does not show a very regular change with the increase of the temperature and age of seeds synthesis.Considering the effect of C-S-H seeds on the hydration and mechanical properties of cement,and economy and short cycle of seeds synthesis,the C-S-H seeds synthesized at room temperature for 1 day or 55 ℃ water bath for 12 hours is recommended..展开更多
Structure and mechanical properties of Calcium silicate hydrate (C-S-H) at a molecular level act as "DNA" of cement-based construction materials.In order to understand loading resistance capability of C-S-H ...Structure and mechanical properties of Calcium silicate hydrate (C-S-H) at a molecular level act as "DNA" of cement-based construction materials.In order to understand loading resistance capability of C-S-H gel,research on molecular dynamics (MD) was carried out to simulate the uniaxial tension test on C-S-H model along x,y,and z directions.Due to the structure and dynamic differences of the layered structure,the C-S-H model demonstrates heterogeneous mechanical behavior.On an XY plane,the cohesive force can reach 4 GPa,which is mainly provided by the Ca-O and Si-O ionic-covalent bonds.The good plasticity of calcium silicate sheet is attributed to the silicate branch structure formation and the recovery role of interlayer calcium atoms.However,in z direction,C-S-H layers connected by the unstable H-bonds network,have the weakest tensile strength 2.2 GPa.This results in the brittle failure mode in z direction.The relatively low tensile strength and poor plasticity in z direction provides molecular insights into the tensile weakness of cement materials at macro-level.展开更多
This study aimed to improve the hydraulic potential properties of the slag. Therefore, a method of dynamic hydrothermal synthesis was applied to synthesize calcium silicate hydrate. The phases and nanostructures were ...This study aimed to improve the hydraulic potential properties of the slag. Therefore, a method of dynamic hydrothermal synthesis was applied to synthesize calcium silicate hydrate. The phases and nanostructures were characterized by XRD, FTIR, TEM, and BET nitrogen adsorption. The infl uence of alkalinity of steel slag on its structures and properties was discussed. The experimental results show that, the main product is amorphous calcium silicate hydrate gel with fl occulent or fi brous pattern with a BET specifi c surface area up to 77 m2/g and pore volume of 0.34 mL/g. Compared with low alkalinity steel slag, calcium silicate hydrate synthesized from higher alkalinity steel slag is prone to transform to tobermorite structure.展开更多
Soil stabilization using nanomaterials is an emerging research area although,to date,its investigation has mostly been laboratory-based and therefore requires extensive study for transfer to practical field ap-plicati...Soil stabilization using nanomaterials is an emerging research area although,to date,its investigation has mostly been laboratory-based and therefore requires extensive study for transfer to practical field ap-plications.The present study advocates nano-calcium carbonate(NCC)material,a relatively unexplored nanomaterial additive,for stabilization of low-plasticity fine-grained soil having moderate organic content.The plasticity index,compaction,unconfined compressive strength(UCS),compressibility and permeability characteristics of the 0.2%,0.4%,0.6%and 0.8%NCC-treated soil,and untreated soil(as control),were determined,including investigations of the effect of up to 90-d curing on the UCS and permeability properties.In terms of UCS improvement,0.4%NCC addition was identified as the optimum dosage,mobilizing a UCS at 90-d curing of almost twice that for the untreated soil.For treated soil,particle aggregation arising from NCC addition initially produced an increase in the permeability coef-ficient,but its magnitude decreased for increased curing owing to calcium silicate hydrate(CSH)gel formation,although still remaining higher compared to the untreated soil for all dosages and curing periods investigated.Compression index decreased for all NCC-treated soil investigated.SEM micro-graphs indicated the presence of gel patches along with particle aggregation.X-ray diffraction(XRD)results showed the presence of hydration products,such as CSH.Significant increases in UCS are initially attributed to void filling and then because of CSH gel formation with increased curing.展开更多
Hydrothermal treatment has been widely applied in the synthesis of well crystalline calcium silicate hydrate(CSH), such as tobermorite and xonotlite. However, both morphology and crystallinity of CSH are greatly aff...Hydrothermal treatment has been widely applied in the synthesis of well crystalline calcium silicate hydrate(CSH), such as tobermorite and xonotlite. However, both morphology and crystallinity of CSH are greatly affected by the conditions of hydrothermal treatment including siliceous materials, temperature increase rate and isothermal periods. In this study, the influence of hydrothermal conditions on the growth of nano-crystalline CSH was investigated based on XRD analysis. Results showed that siliceous materials with amorphous nature(i e, nano silica powder) are beneficial to synthesize pure amorphous CSH, while the use of more crystallized siliceous materials(i e, diatomite and quartz powder) leads to producing crystalline CSH. Results also indicate that the formation of tobermorite and xonotlite is greatly affected by the temperature rise rate during hydrothermal treatment.展开更多
The time-dependent viscoelastic response of cement-based materials to applied deformation is far from fully understood at the atomic level.Calcium silicate hydrate(C-S-H),the main hydration product of Portland cement,...The time-dependent viscoelastic response of cement-based materials to applied deformation is far from fully understood at the atomic level.Calcium silicate hydrate(C-S-H),the main hydration product of Portland cement,is responsible for the viscoelastic mechanism of cement-based materials.In this study,a molecular model of C-S-H was developed to explain the stress relaxation characteristics of C-S-H at different initial deformation states,Ca/Si ratios,temperatures,and water contents,which cannot be accessed experimentally.The stress relaxation of C-S-H occurs regardless of whether it is subjected to initial shear,tensile,or compressive deformation,and shows a heterogeneous characteristic.Water plays a crucial role in the stress relaxation process.A large Ca/Si ratio and high temperature reduce the cohesion between the calcium-silicate layer and the interlayer region,and the viscosity of the interlayer region,thereby accelerating the stress relaxation of C-S-H.The effect of the hydrogen bond network and the morphology of C-S-H on the evolution of the stress relaxation characteristics of C-S-H at different water contents was elucidated by nonaffine mean squared displacement.Our results shed light on the stress relaxation characteristics of C-S-H from a microscopic perspective,bridging the gap between the microscopic phenomena and the underlying atomic-level mechanisms.展开更多
This study examined the effects of using bagasse ash in replacement of ordinary Portland cement(OPC)in the treatment of expansive soils.The study concentrated on the compaction characteristics,volume change,compressiv...This study examined the effects of using bagasse ash in replacement of ordinary Portland cement(OPC)in the treatment of expansive soils.The study concentrated on the compaction characteristics,volume change,compressive strength,splitting tensile strength,microstructure,California bearing ratio(CBR)value,and shear wave velocity of expansive soils treated with cement.Different bagasse ash replacement ratios were used to create soil samples.At varying curing times of 7,14,and 28 days,standard compaction tests,unconfined compressive strength tests,CBR tests,Brazilian split tensile testing,and bender element(BE)tests were carried out.According to X-ray diffraction(XRD)investigations,quartz and crystobalite make up the majority of the minerals in bagasse ash.Bagasse ash contains a variety of grain sizes,including numerous fiber-shaped particles,according to a scanning electronic microscope(SEM)test.For all of the treated specimens with various replacement ratios,the overall additive content has not changed.The results of the Brazilian split tensile tests demonstrate improved tensile strength for all specimens with various replacement proportions.A lower maximum dry density and a greater optimal water content would result from the substitution of bagasse ash.When the replacement ratio is not more than 20%,the CBR values of the parts replaced specimens are even higher than the cement treatments.The results of BE testing on the treated soils show that there is significant stiffness anisotropy but that it steadily diminishes with curing time and replacement ratio.According to the study,bagasse ash is a useful mineral additive,and the best replacement ratio(CBA20)is 20%.展开更多
Composition, morphology, and structure of hydration products in hardened pastes of three kinds of blended cement(cement-silica fume, cement-quartz powder and cement-silica fume-quartz powder) hydrated under differen...Composition, morphology, and structure of hydration products in hardened pastes of three kinds of blended cement(cement-silica fume, cement-quartz powder and cement-silica fume-quartz powder) hydrated under different curing regimes(standard curing, 90 ℃ steam curing, 200 ℃ and 250 ℃ autoclave curing) were investigated by X-ray diffraction and field emission scanning electron microscope equipped with EDAX system. Results showed that the main hydration products in three kinds of hardened pastes under standard curing condition are all C-S-H gels, CH, and AFt. Under 90 ℃ steam curing condition, the main hydration products of cement-silica fume and cement-silica fume-quartz powder are C-S-H gels, whereas those of cement-quartz powder are C-S-H and CH. Under 200 or 250 ℃ autoclave curing condition, no obvious crystallized CH phase is found in hardened pastes of three kinds of blended cement, and C-S-H gels are transformed into one or more crystalline phases such as tobermorite, jennite, and xonotlite. The chemical composition and morphology of these crystalline phases depend on the composition of mixture and autoclave temperature.展开更多
The difference between the systems of CaO-SiO2,-H2O and CaO-SiO2-Al(OH)3,-H2O, was studied, especially the effect of Al3+on the crystallinity of tobermorite was focussed. As a result, in the system of CaO-SiO2-H2O, to...The difference between the systems of CaO-SiO2,-H2O and CaO-SiO2-Al(OH)3,-H2O, was studied, especially the effect of Al3+on the crystallinity of tobermorite was focussed. As a result, in the system of CaO-SiO2-H2O, tobermorite formed early, however, withreaction time forward, tobermorite was replaced by xonotlite. So far as CaO-SiO2-Al(OH)3,-H2O was concemed, hydrothermal reactionwas cdried out under the same condition as CaO-SiO2-H2O to study the morphological changes of tobermorite crystals. It was found thatAl3+ accelefated the crystal growth of tobermorite to some extent and was in faVor ofplaty crystals. Moreovef, with the Al3+ content in-creasing in the starting material, the morphology of tobermorite did not change magnificently, but platy crystals became more and moreeminent. As soon as the Al2O3 content was over 15.6%, synthetic mineral greatly changed in smicthe and haled into hibschite differentfrom 1 .1 nm tobermorite. Obviously, xonotlite was not apt to form in the presence of Al3+.展开更多
The reactivity of the recycled glass powder (GP) in a cementitious medium has been studied over time by means of X-ray diffraction and thermal gravimetric analysis. Two different mixtures based on cement/glass powder ...The reactivity of the recycled glass powder (GP) in a cementitious medium has been studied over time by means of X-ray diffraction and thermal gravimetric analysis. Two different mixtures based on cement/glass powder (0 or 20 wt% GP) and lime/glass powder (70 wt% GP) were considered. Analysis revealed the coexistence of both hydration and pozzolanic reaction during the hardening of the mortars. At young age, the cement hydration would prevail over the pozzolanic one resulting in a decrease of physico-chemical </span></span><a name="_GoBack"></a><span><span><span style="font-family:"">and mechanical properties of the material due to the dilution effect. The pozzolanic reaction that predominates from 91 days, would induce the formation of supplementary C-S-H leading to improve the material properties.展开更多
基金Project supported by the Grant-in-Aid for Scientific Research from Ministry of Education, Science, Sport, and Technology of Japan (No.13876015).
文摘Previous studies have shown that porous hydrated calcium silicate (PS) is very effective in decreasing cadmium (Cd) content in brown rice. However, it is unclear whether the PS influences cadmium transformation in soil. The present study examined the effect of PS on pH, cadmium transformation and cadmium solubility in Andosol and Alluvial soil, and also compared its effects with CaCO3, acidic porous hydrated calcium silicate (APS) and silica gel. Soil cadmium was operationally fractionationed into exchangeable (Exch), bound to carbonates (Carb), bound to iron and manganese oxides (FeMnOx), bound to organic matters (OM) and residual (Res) fraction. Application of PS and CaCO3 at hig rates enhanced soil pH, while APS and silica gel did not obviously change soil pH. PS and CaCO3 also increased the FeMnOx-Cd in Andosol and Carb-Cd in Alluvial soil, thus reducing the Exch-Cd in the tested soils. However, PS was less effective than CaCO3 at the same application rate. Cadmium fractions in the two soils were not changed by the treatments of APS and silica gel. There were no obvious differences in the solubility of cadmium in soils treated with PS, APS, silica gel and CaCO3 except Andosol treated 2.0% CaCO3 at the same pH of soil-CaC12 suspensions. These findings suggested that the decrease of cadmium availability in soil was mainly attributed to the increase of soil pH caused by PS.
基金This work was supported by a Doctoral program of Zhejiang University of science and technology(F701104L08)。
文摘The problems of traditional concrete such as brittleness,poor toughness and short service life of concrete engineering under acid rain or marine environment need to be solved urgently.Hydrated calcium silicate(C-S-H)is a key component to improve the mechanical properties and durability of concrete.However,the traditional method of concrete material design based on empirical models or comparative tests has become a bottleneck restricting the sustainable development of concrete.The synthesis method,molecular structure and properties of C-S-H were systematically described in this paper;The interface structure and interaction of graphene oxide/calcium silicate hydrate(C-S-H/GO)were discussed.On this basis,the saturated and unsaturated transport characteristics of ions and water molecules in C-S-H/GO nanochannels under the environment of ocean and acid rain were introduced.The contents of this review provide the basis for improving the multi-scale transmission theory and microstructure design of concrete.It has important guiding significance for analyzing and improving the service life of concrete in complex environment.
基金This work was supported by a Natural Science Foundation of Zhejiang Province(LQ23E080003)Innovative training program for college students.
文摘Calcium silicate hydrate(C-S-H)is the mainly strength source of cement-based materials,but there is little basic research.In this paper,molecular dynamics method is applied to analyze the multi-scale tensile strength and tensile strain of C-S-H layered materials under the condition of external physical fields(temperature and strain rate).The results show that the tensile strength and strain of C-S-H model decrease with temperature raises.The temperature(from 1 K to 600 K)has obvious influence on the tensile strain and strength of C-S-H layered materials.In addition,at(0.00025 ps^(-1)-0.001 ps^(-1)),the tensile strain and strength of C-S-H layered materials are less sensitive to strain rate.The whole model is closer to a 3-dimensional deformation.However,at(0.001 ps^(-1)-0.005 ps^(-1)),the dynamic load effect begins to increase,and the work done by the load per unit time increased.The tensile strain and strength of C-S-H layered materials indicates intensified by the change of strain rate.The energies are randomly distributed in the system,not concentrated in a certain area.
基金Funded by Natural Science Basic Research Plan in Shaanxi Province of China (Nos.2021JQ-500, 2021GY-203, 2023-JCYB-096)Shaanxi Provincial Education Department of Key Scientific Research Plan (No.20JS079)Shaanxi Provincial Education Department of Normal Scientific Research Plan (No.20JK0727)。
文摘In order to expand the advantages of strong durability and high compressive strength of calcium silicate hydrates(C-S-H),at the same time to make up for the poor early mechanical strength of magnesium silicate hydrates (M-S-H),we present the features and advantages of C-S-H and M-S-H and a comprehensive review of the progress on CaO-MgO-SiO_(2)-H_(2)O.Moreover,we systematically describe natural calcium and magnesium silicate minerals and thermodynamic properties of CaO-MgO-SiO_(2)-H_(2)O.The effect of magnesium on C-S-H and calcium on M-S-H is summarized deeply;the formation and structural feature of CaO-MgO-SiO_(2)-H_(2)O is also explained in detail.Finally,the development of calcium and magnesium silicate hydrates in the future is pointed out,and the further research is discussed and estimated.
基金Funded by the National Basic Research Program of China (973 Program) (No. 2009CB623201)the National Natural Science Foundation of China (No.51072150)
文摘The samples of the C-S-H series were synthesized by hydrothermal reaction of fumed silica, CaO and deionized water at initial C/S ratios between 1.0-1.7. Phase composition and structural and morphology characteristics of C-S-H samples were analyzed by XRD, IR and SEM. The experimental results showed that the d-spacing of (002), (110) and (020) decreased, the d-spacing of (200) increased, and the d-spacing of (310) varied randomly, the polymerization of silica tetrahedra of C-S-H decreased, and morphology of C-S-H samples varied from sheet shapes to long reticular fibers as C/S ratio increased.
基金This work was supported by the National Natural Science Foun-dation of China(No.52174273)the Basic Science Center Project for National Natural Science Foundation of China(No.72088101)+1 种基金the Postdoctoral Science Foundation of China(No.2021TQ0370)the Science and Technology Innovation Program of Hunan Pro-vince(No.2021RC2003).
文摘Coal fly ash is a typical secondary aluminum/silicon resource.The preparation of zeolite-type absorbent is a potential way for its value-added utilization,while the purity and adsorption property of zeolite are limited due to the occurrence of side reactions in the synthesis process.In this study,a designated composite consisted of crystalline zeolites and amorphous calcium silicate hydrate was selected,which was direct synthesized from fly ash under conditions of a Ca/Si molar ratio of 0.8,an initial NaOH concentration of 0.5 mol/L,a hydrothermal temperature of 170℃and a liquid–solid ratio of 15 mL/g.The results indicated that this composite had superior adsorption property for a variety of heavy metals,which was based on the exchange of calcium and sodium ions in zeolites and calcium silicate hydrate.Its adsorption capacities for Pb^(2+),Ni^(2+),Cd^(2+),Zn^(2+),Cu^(2+)and Cr^(3+)attained 409.4,222.4,147.5,93.2,101.1 and 157.0 mg/g,respectively,in single solution with a pH of 4.5.After regulating the synthesis conditions,the transformation of amorphous calcium silicate hydrate into crystallized tobermorite weakened the adsorption capacity of the composite.Besides,due to the competitive adsorption in a multiple ions solution,the adsorption capacities for these heavy metals had a reduction.
基金Funded by National Key R&D Program of China(No.2017YFB0310001)the National Natural Science Foundation of China(Nos.51772226,51972249,51872216)。
文摘C-S-H series are synthesized at different temperatures and ages by pozzolanic reaction.The change of particle size distribution,phase composition,morphology and nanostructure of C-S-H with temperatures and ages,and the effects of C-S-H seeds and seeds parameters on the hydration behavior and mechanical properties development of cement were investigated by DLS,XRD,SEM,^(29)Si NMR,TAM-air isothermal calorimeter and mechanical properties test.The results show that the particle size,crystallinity,basal spacing and Q^(2)/Q^(1) ratio of C-S-H increases with the increase of synthesis temperature and age.The addition of synthesized C-S-H seeds to cement pastes results in the strong acceleration effect on cement hydration and significant improvement of the early strength of cement paste and mortar.The 1 day-C-S-H seeds synthesized at room temperature can increase the strength of cement paste by about 30 MPa at 12 h.The effect does not show a very regular change with the increase of the temperature and age of seeds synthesis.Considering the effect of C-S-H seeds on the hydration and mechanical properties of cement,and economy and short cycle of seeds synthesis,the C-S-H seeds synthesized at room temperature for 1 day or 55 ℃ water bath for 12 hours is recommended..
基金the subject of Key Science and Technology Project of Heilongjiang Transport Department(No.2017HLJ0029)the National Natural Science Foundation of China(Nos.51878003,51778513)the Major State Basic Research Development Program of China(“973”Program)(No.2015CB655101)。
文摘Structure and mechanical properties of Calcium silicate hydrate (C-S-H) at a molecular level act as "DNA" of cement-based construction materials.In order to understand loading resistance capability of C-S-H gel,research on molecular dynamics (MD) was carried out to simulate the uniaxial tension test on C-S-H model along x,y,and z directions.Due to the structure and dynamic differences of the layered structure,the C-S-H model demonstrates heterogeneous mechanical behavior.On an XY plane,the cohesive force can reach 4 GPa,which is mainly provided by the Ca-O and Si-O ionic-covalent bonds.The good plasticity of calcium silicate sheet is attributed to the silicate branch structure formation and the recovery role of interlayer calcium atoms.However,in z direction,C-S-H layers connected by the unstable H-bonds network,have the weakest tensile strength 2.2 GPa.This results in the brittle failure mode in z direction.The relatively low tensile strength and poor plasticity in z direction provides molecular insights into the tensile weakness of cement materials at macro-level.
基金Funded by the National Natural Science Foundation of China(No.50972171)the Project of International Science and Technology Cooperation(No.2009DFR50450)the Large Equipment Fund of Chongqing University(No.2012061511)
文摘This study aimed to improve the hydraulic potential properties of the slag. Therefore, a method of dynamic hydrothermal synthesis was applied to synthesize calcium silicate hydrate. The phases and nanostructures were characterized by XRD, FTIR, TEM, and BET nitrogen adsorption. The infl uence of alkalinity of steel slag on its structures and properties was discussed. The experimental results show that, the main product is amorphous calcium silicate hydrate gel with fl occulent or fi brous pattern with a BET specifi c surface area up to 77 m2/g and pore volume of 0.34 mL/g. Compared with low alkalinity steel slag, calcium silicate hydrate synthesized from higher alkalinity steel slag is prone to transform to tobermorite structure.
文摘Soil stabilization using nanomaterials is an emerging research area although,to date,its investigation has mostly been laboratory-based and therefore requires extensive study for transfer to practical field ap-plications.The present study advocates nano-calcium carbonate(NCC)material,a relatively unexplored nanomaterial additive,for stabilization of low-plasticity fine-grained soil having moderate organic content.The plasticity index,compaction,unconfined compressive strength(UCS),compressibility and permeability characteristics of the 0.2%,0.4%,0.6%and 0.8%NCC-treated soil,and untreated soil(as control),were determined,including investigations of the effect of up to 90-d curing on the UCS and permeability properties.In terms of UCS improvement,0.4%NCC addition was identified as the optimum dosage,mobilizing a UCS at 90-d curing of almost twice that for the untreated soil.For treated soil,particle aggregation arising from NCC addition initially produced an increase in the permeability coef-ficient,but its magnitude decreased for increased curing owing to calcium silicate hydrate(CSH)gel formation,although still remaining higher compared to the untreated soil for all dosages and curing periods investigated.Compression index decreased for all NCC-treated soil investigated.SEM micro-graphs indicated the presence of gel patches along with particle aggregation.X-ray diffraction(XRD)results showed the presence of hydration products,such as CSH.Significant increases in UCS are initially attributed to void filling and then because of CSH gel formation with increased curing.
基金Funded by the Fundamental Research Funds for the Central Universities(No.2018CDXYCL0018)the National Natural Science Foundation of China(NSFC)(No.51678093)the National Youth Fund(No.51402029)
文摘Hydrothermal treatment has been widely applied in the synthesis of well crystalline calcium silicate hydrate(CSH), such as tobermorite and xonotlite. However, both morphology and crystallinity of CSH are greatly affected by the conditions of hydrothermal treatment including siliceous materials, temperature increase rate and isothermal periods. In this study, the influence of hydrothermal conditions on the growth of nano-crystalline CSH was investigated based on XRD analysis. Results showed that siliceous materials with amorphous nature(i e, nano silica powder) are beneficial to synthesize pure amorphous CSH, while the use of more crystallized siliceous materials(i e, diatomite and quartz powder) leads to producing crystalline CSH. Results also indicate that the formation of tobermorite and xonotlite is greatly affected by the temperature rise rate during hydrothermal treatment.
基金This work is supported by the National Natural Science Foundation of China(Nos.51602229 and U2040222)the Opening Project of Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education(Tongji University)the Water Conservancy Science and Technology Project of Hunan Province(No.XSKJ2021000-15),China.
文摘The time-dependent viscoelastic response of cement-based materials to applied deformation is far from fully understood at the atomic level.Calcium silicate hydrate(C-S-H),the main hydration product of Portland cement,is responsible for the viscoelastic mechanism of cement-based materials.In this study,a molecular model of C-S-H was developed to explain the stress relaxation characteristics of C-S-H at different initial deformation states,Ca/Si ratios,temperatures,and water contents,which cannot be accessed experimentally.The stress relaxation of C-S-H occurs regardless of whether it is subjected to initial shear,tensile,or compressive deformation,and shows a heterogeneous characteristic.Water plays a crucial role in the stress relaxation process.A large Ca/Si ratio and high temperature reduce the cohesion between the calcium-silicate layer and the interlayer region,and the viscosity of the interlayer region,thereby accelerating the stress relaxation of C-S-H.The effect of the hydrogen bond network and the morphology of C-S-H on the evolution of the stress relaxation characteristics of C-S-H at different water contents was elucidated by nonaffine mean squared displacement.Our results shed light on the stress relaxation characteristics of C-S-H from a microscopic perspective,bridging the gap between the microscopic phenomena and the underlying atomic-level mechanisms.
基金funded by the National Natural Science Foundation of China(Nos.11672066,12172085).
文摘This study examined the effects of using bagasse ash in replacement of ordinary Portland cement(OPC)in the treatment of expansive soils.The study concentrated on the compaction characteristics,volume change,compressive strength,splitting tensile strength,microstructure,California bearing ratio(CBR)value,and shear wave velocity of expansive soils treated with cement.Different bagasse ash replacement ratios were used to create soil samples.At varying curing times of 7,14,and 28 days,standard compaction tests,unconfined compressive strength tests,CBR tests,Brazilian split tensile testing,and bender element(BE)tests were carried out.According to X-ray diffraction(XRD)investigations,quartz and crystobalite make up the majority of the minerals in bagasse ash.Bagasse ash contains a variety of grain sizes,including numerous fiber-shaped particles,according to a scanning electronic microscope(SEM)test.For all of the treated specimens with various replacement ratios,the overall additive content has not changed.The results of the Brazilian split tensile tests demonstrate improved tensile strength for all specimens with various replacement proportions.A lower maximum dry density and a greater optimal water content would result from the substitution of bagasse ash.When the replacement ratio is not more than 20%,the CBR values of the parts replaced specimens are even higher than the cement treatments.The results of BE testing on the treated soils show that there is significant stiffness anisotropy but that it steadily diminishes with curing time and replacement ratio.According to the study,bagasse ash is a useful mineral additive,and the best replacement ratio(CBA20)is 20%.
基金Funded by the National Natural Science Foundation of China(Nos.51272193,51372183,51072150)Program for New Century Excellent Talents in University(No.NCET-10-0660)the National Key Research Projects(No.2016YFB0303501)
文摘Composition, morphology, and structure of hydration products in hardened pastes of three kinds of blended cement(cement-silica fume, cement-quartz powder and cement-silica fume-quartz powder) hydrated under different curing regimes(standard curing, 90 ℃ steam curing, 200 ℃ and 250 ℃ autoclave curing) were investigated by X-ray diffraction and field emission scanning electron microscope equipped with EDAX system. Results showed that the main hydration products in three kinds of hardened pastes under standard curing condition are all C-S-H gels, CH, and AFt. Under 90 ℃ steam curing condition, the main hydration products of cement-silica fume and cement-silica fume-quartz powder are C-S-H gels, whereas those of cement-quartz powder are C-S-H and CH. Under 200 or 250 ℃ autoclave curing condition, no obvious crystallized CH phase is found in hardened pastes of three kinds of blended cement, and C-S-H gels are transformed into one or more crystalline phases such as tobermorite, jennite, and xonotlite. The chemical composition and morphology of these crystalline phases depend on the composition of mixture and autoclave temperature.
文摘The difference between the systems of CaO-SiO2,-H2O and CaO-SiO2-Al(OH)3,-H2O, was studied, especially the effect of Al3+on the crystallinity of tobermorite was focussed. As a result, in the system of CaO-SiO2-H2O, tobermorite formed early, however, withreaction time forward, tobermorite was replaced by xonotlite. So far as CaO-SiO2-Al(OH)3,-H2O was concemed, hydrothermal reactionwas cdried out under the same condition as CaO-SiO2-H2O to study the morphological changes of tobermorite crystals. It was found thatAl3+ accelefated the crystal growth of tobermorite to some extent and was in faVor ofplaty crystals. Moreovef, with the Al3+ content in-creasing in the starting material, the morphology of tobermorite did not change magnificently, but platy crystals became more and moreeminent. As soon as the Al2O3 content was over 15.6%, synthetic mineral greatly changed in smicthe and haled into hibschite differentfrom 1 .1 nm tobermorite. Obviously, xonotlite was not apt to form in the presence of Al3+.
文摘The reactivity of the recycled glass powder (GP) in a cementitious medium has been studied over time by means of X-ray diffraction and thermal gravimetric analysis. Two different mixtures based on cement/glass powder (0 or 20 wt% GP) and lime/glass powder (70 wt% GP) were considered. Analysis revealed the coexistence of both hydration and pozzolanic reaction during the hardening of the mortars. At young age, the cement hydration would prevail over the pozzolanic one resulting in a decrease of physico-chemical </span></span><a name="_GoBack"></a><span><span><span style="font-family:"">and mechanical properties of the material due to the dilution effect. The pozzolanic reaction that predominates from 91 days, would induce the formation of supplementary C-S-H leading to improve the material properties.