Early Age Hydration of Cement Paste Monitored with Ultrasonic Velocity and Numerical Simulation

Early age hydration of cement paste was investigated by monitoring the ultrasonic propagation velocity and simulated with the numerical model CEMHYD3D. The ultrasonic velocity of the P-wave was recorded during the first 24 hours of the hydration process and its evolution was analyzed. It is shown that the UPV method is an effective, accurate and non-destructive method for monitoring the early age hydration process of cement paste. The early age hydration process can be classified as four periods, which are the dormant period, acceleration period, deceleration period and stabilization period. Higher w/c ratios result in lower UPV, and delay initial setting time due to the decreased solid volume. The change of UPV is clearly related to the hydration degree of cement particles.

Effect of Superplasticizers on the Early Age Hydration of Sulfoaluminate Cement

The effects of two types of superplasticizers on the properties of CSA cement pastes during early hydration were studied. The influences of two types of superplasticizers on the properties of cement pastes, including the normal consistency, setting time, fl uidity, and compressive strength, were investigated by using various methods. The hydration products of the cement pastes cured for 1 day and 3 days were studied by X-ray diffraction（XRD） and scanning electron microscopy（SEM）. The results show that the PCE type superplasticizer retards the early age hydration while the FDN type superplasticizer accelerates the early age hydration of the CSA cement. Both types of superplasticizers have no infl uence on the further hydration of CSA cement, confi rmed by the calorimeter tests as well. The ultrasonic pulse velocity measurements were used to probe the influence of two types of superplasticizers on the hydration of CSA cement pastes at a high water-cement ratio（0.45）. The results show that the PCE type superplasticizer retards the early age hydration of the CSA cement while the FDN type superplasticizer has little infl uence on the early age hydration of the CSA cement.

Thermal and Stress Analysis of Early Age Concrete for Spread Footing

The early age performance of spread footing, especially the growth of cracks, is deeply influenced by the heat of hydration of cement. In this paper, 3D finite element method(FEM)models are set up to analyze the temperature distribution and thermal stresses of the spread footing during the first seven days after concrete placement. The mechanical properties of early age concrete are calculated, which are further used in the FEM models. The possibilities of crack growth are estimated by the method of crack index. The crack indexes of quite a number of points are very close to the allowable limit of 1.0 during the last three days. It is also indicated that the influence of foundation ring on the thermal stresses of concrete can be neglected.