Mechanical Analysis of Dead Load Crown and Structure Parameter of Hydraulic Elastic Bulging Roll

The dead load crown of hydraulic elastic bulging roll was discussed using the theory of elastically supported beam,and the dead load experiment was carried out. The theoretical calculation is consistent with the experimental result. The structure parameters for the thickness of roll sleeve,the length of the oil groove and the crown of roll were discussed. The fundamental principle of determining the parameters was put forward. The theoretical basis of the application of the hydraulic elastic bulging roll was established.

ANALYSIS SOLUTION OF BULGING CONVEXITY OF THE HYDRAULIC ELASTIC BULGING ROLL

The hydraulic elastic bulging roll system is a new roll system being developed in recent years.It is the first time in home that dead load test and study on this system has been made.Based on the experiment,the analysis solution of the bulging convexity of the hydraulic elastic bulging roll was obtained by selecting appropriate displacement function and adopting inverse solution of the elasticity theory.In evaluating,a variable displacement function and its solving method was advanced.The analysis results are in accord with the experiment's.Some conclusions have laid the foundation of establishing close-loop controlled mathematical model of the hydraulic elastic bulging roll system.

Influence of Billet Size on Flow,Solidification and Solute Transport in Continuous Casting

The dead load crown of hydraulic elastic bulging roll was discussed using the theory of elastically supported beam, and the dead load experiment was carried out. The theoretical calculation is consistent with the experimental result. The structure parameters for the thickness of roll sleeve, the length of the oil groove and the crown of roll were discussed. The fundamental principle of determining the parameters was put forward. The theoretical basis of the application of the hydraulic elastic bulging roll was established.

Characterization of mechanical properties for tubular materials based on hydraulic bulge test under axial feeding force

A T-shape tube hydraulic bulge test under axial feeding force is carried out to characterize the mechanical properties of EN AW 5049-O and 6060-O aluminium alloys.The punch displacement,T-branch height and axial compressive force are recorded online during the experiment.An intelligent inverse identification framework combining the finite element method and numerical optimization algorithm is developed to determine material parameters by fitting simulated results to the experimental data iteratively.The identified constitutive parameters using the inverse modelling technique are compared with those determined by the theoretical analysis and uniaxial tensile test.The comparison shows that the predicted bulge height and punch force based on the material parameters obtained by the three methods are different and the inverse strategy produces the smallest gap between numerical and experimental values.It is possible to conclude that the hydraulic bulge test can be applied to characterize the stress-strain curve of tubular materials at the large strain scope,and the automatic inverse framework is a more accurate post-processing procedure to identify material constitutive parameters compared with the classical analytical model.

An inverse strategy to determine constitutive parameters of tubular materials for hydroforming processes

This paper is to determine the flow stress curve of 5049-O aluminium alloy by a tube hydraulic bulging test with fixed end-conditions. During this test, several tubular specimens are bulged under different internal pressures before their bursting, and the corresponding bulging height and wall thickness at the pole are measured. An inverse strategy is developed to determine the constitutive parameters of tubular materials based on experimental data, which combines the finite element method with gradient-based optimization techniques. In this scheme, the objective function is formulated with the sum of least squares of the error between numerical and experimental data, and finite difference approximation is used to calculate the gradient. The tubular material behavior is assumed to meet the von Mises yield criterion and Hollomon exponential hardening law. Then, constitutive parameters identification is performed by minimization of the objective function. In order to validate the performance of this framework, identified parameters are compared with those obtained by two types of theoretical models, and tensile tests are performed on specimens cut from the same tubes. The comparison shows that this inverse framework is robust and can achieve a more accurate parameter identification by eliminating mechanical and geometrical assumptions in classical theoretical analysis.

Influence of Heat Treatment on Hydroformability of TRIP Seamless Steel Tube

A low-carbon TRIP seamless steel tube, which is expected to be used in the hydroforming process, was successfully fabricated using piercing, cold-drawing and two-stage heat treatment process. The two-stage heat treatment is one crucial step because it significantly affects the microstructure and mechanical properties of TRIP seam less steel tube. In order to obtain the TRIP seamless steel tube with high hydroformability, several different heat treatment processes were conducted. The effects of heat treatment conditions （intercritical annealing （IA） and isothermal bainite treatment （IBT）） on the TRIP seamless steel tube hydroformability which was determined by free hydraulic bulge test were analyzed. Two different internal pressure boosting velocities of 0.2 and 0.5 MPa/s of free hydraulic bulge tests were adopted to determine the effective stress vs. effective strain curve of TRIP seamless steel tube. The results showed that for the predetermined IA condition, the maximum bulge height increased, but the maximum burst internal pressure decreased, with the increase of IBT holding time from 4 to 6 rain. For the predetermined IBT condition, the maximum bulge height decreased, but the maximum burst internal pressure increased, with the increase of IA holding time from 5 to 10 rain. By analyzing the free hydraulic bulge test results, it was found that the maximum bulge heights of TRIP seamless steel tubes with the internal pressure boosting velocity of 0.5 MPa/s were higher than those when the internal pressure boosting velocity was 0.2 MPa/s. This means that an appropriate deformation rate should be chosen to obtain the optimal hydroformability of TRIP seamless steel tube. In addition, the effective stress vs. effective strain curves of TRIP seamless steel tubes were ohtained with free hydraulic bulge test.