Based on the matching conditions of different fluid regions, the eigenfunction expansion method is used to develop a theoretical formula for wave reflection in front of the perforated structure with a partially slit f...Based on the matching conditions of different fluid regions, the eigenfunction expansion method is used to develop a theoretical formula for wave reflection in front of the perforated structure with a partially slit front wall. The accuracy of the solution is verified by comparing the numerical results with experimental data. In addition, a new hydraulic design method is developed by derivation of the theoretical formula with respect to the porosity of the slit wall, and the results of this design method is drafted for harbour engineers to use.展开更多
This paper describes the design and implementation of a hydraulic circuit design system using case-based reasoning (CBR) paradigm from AI community The domain of hydraulic circuit design and case-based reasoning are ...This paper describes the design and implementation of a hydraulic circuit design system using case-based reasoning (CBR) paradigm from AI community The domain of hydraulic circuit design and case-based reasoning are briefly reviewed Then a proposed methodology in compuer-aided circuit design and dynamic leaning with the use of CBR is described Finally an application example is selected to illustrate the ussfulness of applying CBR in hydraulic circuit design with leaming.展开更多
Based on the characteristics of large flow rate , low head , short annual operation time , and high reliability of the city flood-control pumping stations , a new-type shaft tubular pumping system featuring a shaft su...Based on the characteristics of large flow rate , low head , short annual operation time , and high reliability of the city flood-control pumping stations , a new-type shaft tubular pumping system featuring a shaft suction box and a siphon-type discharge passage with a vacuum breaker as the cutoff device was developed , which possesses such advantages as simple structure , reliable cutoff , and high energy performance.Taking some pumping stations as the case studies , in the light of the specified operation conditions , the hydraulic optimal design of the shaft-type tubular pumping system was determined and the optimized shape of the system was recommended.The performance prediction based on the computational fluid dynamics methodology was determined and the model test verification was conducted.The results show that the predicted data agree with the experimental head and efficiency so that both methods can be used to determine the performance of a real pumping station.Finally , the in-situ measurements of a pumping station during the commissioning period further verified that the shaft-type tubular pumping station with a siphon discharge passage is of higher efficiency , more reliable and stable.展开更多
A novel optimization design method for the multiphase pump impeller is proposed through combining the quasi-3D hydraulic design(Q3DHD), the boundary vortex flux(BVF) diagnosis, and the genetic algorithm(GA). The...A novel optimization design method for the multiphase pump impeller is proposed through combining the quasi-3D hydraulic design(Q3DHD), the boundary vortex flux(BVF) diagnosis, and the genetic algorithm(GA). The BVF diagnosis based on the Q3DHD is used to evaluate the objection function. Numerical simulations and hydraulic performance tests are carried out to compare the impeller designed only by the Q3DHD method and that optimized by the presented method. The comparisons of both the flow fields simulated under the same condition show that(1) the pressure distribution in the optimized impeller is more reasonable and the gas-liquid separation is more efficiently inhibited,(2) the scales of the gas pocket and the vortex decrease remarkably for the optimized impeller,(3) the unevenness of the BVF distributions near the shroud of the original impeller is effectively eliminated in the optimized impeller. The experimental results show that the differential pressure and the maximum efficiency of the optimized impeller are increased by 4% and 2.5%, respectively. Overall, the study indicates that the optimization design method proposed in this paper is feasible.展开更多
Maximizing petroleum production while efficiently managing the operational costs is the oil and gas industry's primary goal which requires innovative engineering approaches and production-enhancing treatments such...Maximizing petroleum production while efficiently managing the operational costs is the oil and gas industry's primary goal which requires innovative engineering approaches and production-enhancing treatments such as hydraulic fracturing(HF).During the HF process,the injected fluid mixed with sands or proppants will create permanent fluid channels to drain more of the reservoir volume.The level of complexity and various constraints involved in real field treatments have made HF even more chal-lenging in layered carbonate reservoirs with the water drive mechanism.A prominent concern is the downward fracture growth to the oil/water contact zone that may cause unfavorable water cut levels.This fracture height confinement criterion necessitates optimization of fracture dimension design.Fracture height development is mainly a function of in-situ stress conditions and stress magnitude differences between geologic layers.In cases with a water table at the proximity of the wellbore,fracture height directly affects the operational success.This paper demonstrates a practical step-by-step approach towards the design of hydraulic fracturing treatment in an offshore carbonate oil reservoir.The modeling process involves optimization of the location,number,and conductivity of the proposed fractures.In-jection of high viscosity fluid causes a bi-wing vertical planar fracture to propagate perpendicular to the direction of minimum horizontal stress in the strike-slip faulting regime.Dimensions of the induced hydraulic fractures are also impacted by the amount and type of proppants.However,as with this case study,the magnitude of vertical stress is in the same range as the maximum horizontal stress;the fracture height growth is the limiting factor.The LGR method is used to define fractures in the dynamic reservoir model which has been built based on a complete set of data ranging from the analyses of logs,core samples,and seismic details,to perform production forecasts and economic evaluation.Then a hydraulic fracture software is implemented to provide a timetable for fracturing fluid volume and mixing proppant concentration for the desired fracture dimensions.The results show that,despite the operator's previous perception,five hydraulic fractures per well would be economical,which include a 150 ft long fracture and four shorter fractures with an approximate length of 75 ft designed to manage the risk of penetration into the water-bearing formations.Due to the reservoir pressure drop by time and more flexible fracture dimension constraints at earlier stages of production,executing such stimulations earlier than later would improve the commercial outcomes.展开更多
文摘Based on the matching conditions of different fluid regions, the eigenfunction expansion method is used to develop a theoretical formula for wave reflection in front of the perforated structure with a partially slit front wall. The accuracy of the solution is verified by comparing the numerical results with experimental data. In addition, a new hydraulic design method is developed by derivation of the theoretical formula with respect to the porosity of the slit wall, and the results of this design method is drafted for harbour engineers to use.
文摘This paper describes the design and implementation of a hydraulic circuit design system using case-based reasoning (CBR) paradigm from AI community The domain of hydraulic circuit design and case-based reasoning are briefly reviewed Then a proposed methodology in compuer-aided circuit design and dynamic leaning with the use of CBR is described Finally an application example is selected to illustrate the ussfulness of applying CBR in hydraulic circuit design with leaming.
基金support by the 11th Five Year Key Project of China’s National Scientific Supporting Plan(Grant No.2006BAB04A03)the Hydraulic Engineering Project from the Water Resources Department of Jiangsu Province(Grant No.2010023)
文摘Based on the characteristics of large flow rate , low head , short annual operation time , and high reliability of the city flood-control pumping stations , a new-type shaft tubular pumping system featuring a shaft suction box and a siphon-type discharge passage with a vacuum breaker as the cutoff device was developed , which possesses such advantages as simple structure , reliable cutoff , and high energy performance.Taking some pumping stations as the case studies , in the light of the specified operation conditions , the hydraulic optimal design of the shaft-type tubular pumping system was determined and the optimized shape of the system was recommended.The performance prediction based on the computational fluid dynamics methodology was determined and the model test verification was conducted.The results show that the predicted data agree with the experimental head and efficiency so that both methods can be used to determine the performance of a real pumping station.Finally , the in-situ measurements of a pumping station during the commissioning period further verified that the shaft-type tubular pumping station with a siphon discharge passage is of higher efficiency , more reliable and stable.
基金Project supported by the National Natural Science Foundation of China(Grant No.51209217)
文摘A novel optimization design method for the multiphase pump impeller is proposed through combining the quasi-3D hydraulic design(Q3DHD), the boundary vortex flux(BVF) diagnosis, and the genetic algorithm(GA). The BVF diagnosis based on the Q3DHD is used to evaluate the objection function. Numerical simulations and hydraulic performance tests are carried out to compare the impeller designed only by the Q3DHD method and that optimized by the presented method. The comparisons of both the flow fields simulated under the same condition show that(1) the pressure distribution in the optimized impeller is more reasonable and the gas-liquid separation is more efficiently inhibited,(2) the scales of the gas pocket and the vortex decrease remarkably for the optimized impeller,(3) the unevenness of the BVF distributions near the shroud of the original impeller is effectively eliminated in the optimized impeller. The experimental results show that the differential pressure and the maximum efficiency of the optimized impeller are increased by 4% and 2.5%, respectively. Overall, the study indicates that the optimization design method proposed in this paper is feasible.
文摘Maximizing petroleum production while efficiently managing the operational costs is the oil and gas industry's primary goal which requires innovative engineering approaches and production-enhancing treatments such as hydraulic fracturing(HF).During the HF process,the injected fluid mixed with sands or proppants will create permanent fluid channels to drain more of the reservoir volume.The level of complexity and various constraints involved in real field treatments have made HF even more chal-lenging in layered carbonate reservoirs with the water drive mechanism.A prominent concern is the downward fracture growth to the oil/water contact zone that may cause unfavorable water cut levels.This fracture height confinement criterion necessitates optimization of fracture dimension design.Fracture height development is mainly a function of in-situ stress conditions and stress magnitude differences between geologic layers.In cases with a water table at the proximity of the wellbore,fracture height directly affects the operational success.This paper demonstrates a practical step-by-step approach towards the design of hydraulic fracturing treatment in an offshore carbonate oil reservoir.The modeling process involves optimization of the location,number,and conductivity of the proposed fractures.In-jection of high viscosity fluid causes a bi-wing vertical planar fracture to propagate perpendicular to the direction of minimum horizontal stress in the strike-slip faulting regime.Dimensions of the induced hydraulic fractures are also impacted by the amount and type of proppants.However,as with this case study,the magnitude of vertical stress is in the same range as the maximum horizontal stress;the fracture height growth is the limiting factor.The LGR method is used to define fractures in the dynamic reservoir model which has been built based on a complete set of data ranging from the analyses of logs,core samples,and seismic details,to perform production forecasts and economic evaluation.Then a hydraulic fracture software is implemented to provide a timetable for fracturing fluid volume and mixing proppant concentration for the desired fracture dimensions.The results show that,despite the operator's previous perception,five hydraulic fractures per well would be economical,which include a 150 ft long fracture and four shorter fractures with an approximate length of 75 ft designed to manage the risk of penetration into the water-bearing formations.Due to the reservoir pressure drop by time and more flexible fracture dimension constraints at earlier stages of production,executing such stimulations earlier than later would improve the commercial outcomes.